CONSTRUCTION OF LAB UNDER PM SHRI KEDRIYA VIDYALAYA HIGHGROUND

Amount

Surface dressing not exceeding 15cm deep in soft/loose soil complete all as specified and directed.

Excavation over areas, not exceeding 1.5 m deep and getting out soft/ loose soil complete all as specified and directed.

Excavation over areas exceeding 1.5 m deep and getting out soft/ loose soil complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying/taking out of cables, for drains, sewer line and foundation etc. and getting out, complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick each as in soft/loose soil, complete all as specified and directed.

Material and labour for sand filling under floor or in foundation in layers not exceeding 25 cm in each layer, including watering and well ramming, consolidation complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Material and labour for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete, complete all as specified and directed.

Marerial and Labour for ATT (pre-construction) Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square meter of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

Material and Labour for ATT (pre-construction) Treating the soil along with external perimeter of building at the rate of 2.25 litres of emulsion per metre of perimeter wall complete all as specified and directed.

Material and Labour for ATT (pre-construction) Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

Material and Labour for ATT (pre-construction) treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

Material and Labour for Cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in coping, kneelers apex slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified and directed.

Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregate as in foundations, footing of columns, plinth beams, basement slabs and the like complete all as specified and directed.

Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregate as in roof slabs and in shelves and the like complete all as specified and directed.

Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregate as in chajjas complete all as specified and directed.

Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregate for floor beams, roof beams. Lintel beams, tie beams, gable beam complete and as directed.

Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregate for columns, pillars,piers, posts and struts complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed. Make : Dr Fixit or Equivalent duly approved by accepting officer.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed.

Material and Labour for Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

Supply and Fixing Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

Material and Labour for formwork to sides of concrete foundations, footings, bases of column, raft and raft beams, sides and soffit of foundation and plinth beams; and similar work; vertical or to batter for fair finished surface fo concrete complete all as specified and as directed.

Material and Labour to formwork to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work for rough finished surfaces not exceeding 200 mm thick (Horizontal or Sloping) complete all as specified and as directed.

Material and labour for Formwork to chullah hoods, chajjas, troughs and similar items including edges, flat fair finished concrete surfaces, complete all as specified and directed.

Material and labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc., flat fair finished concrete surfaces, complete all as specified and directed.

Material and Labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc, also splays between floors and beams, etc for rough finish flat surface, complete all as specified and as directed.

Material and labour for Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10 cm but not exceeding 20 cm wide for rough fininshed surfaces of concrete complete all as specified and directed.

All as per ser item No 31 above but exc 5cm not exc 10 cm wide complete all as specified and directed.

Supply and Fix mild steel TMT bars 10 mm dia and over cut to length bent to shape required, including cranking bending spirally for hooping for columns,hooking ends and binding with and incl MS wire (annealed) not less than 0.9 E90mm dia or securing with clips qty confirming to Fe-410W (Gde- E-250) or Fe-290 (Gde-E-165) complete all as specified and as directed.

All as per ser item No 33 here-in-before but 5 mm dia & over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed.

Supply and fix, factory made pressed steel frames for doors with one or more rebates, of size 105mmx60mm, made out of 1.25mm thick sheet, including necessary fixing lugs, hinges, lock strike plate, etc,including necessary fixing lugs, hinges, lock strike plate, etc,incl one shop coat of red oxide primer on exposed surface and one coat of black bitumious paint on unexposed surface complete all as specified and directed.

Supply and fix factory made Flush shutters 35mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

Supply and Fix Prelaminated particle board 12 mm thick, interior grade, prelaminated both side with decorative choice lamination lamination, fixed with screws to alumimium frame work or timber frame work as in shelves complete all as specified and directed.

Supply and fixing Aluminium alloy, anodised, sliding door bolts 300mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.

Supply and Fix 200mm size aluminium handles, cast type, anodized and fixed complete all as specified & as directed.

Supply and Fix 140mm size Floor door stopper doubled leged of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Supply and Fix Brass lock, 2 lever for cupboard, grade I, size 50mm complete all as specified and directed.

Supply and Fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Supply and Fix powder coated aluminium gril (anodised transparent or dyed to required shade acoording to IS: 1868 with minimum anodic coating of grade AC 15) of approved design /pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @200 mm centre to centre, including, cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to existing aluminium frame, complete all as specified and directed.

Supply and fixing plain sheet glass 4 mm thick, ordinary quality, not exceeding 0.50 Sqm in each pane, and glazing with existing aluminium frame or fixed with wooden beading, complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:4), using water proofing compound as per manufacturer's instructions, on brick/concrete surfaces of walls, finished even and smooth, without using extra cement complete all as specified and directed. Note :- 1. Supply only water proofing compound will be measured and paid for separately.

Supply and Fix MS Chroumium plated curtain rod 25 mm dia with and including MS Chromium plated decorative round funnals on either end and provide a visually balanced appearance including MS Chromium plated brackets fixed to wall with 30mm wooden steel screws and PVC rawal plug anchors and installation complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:6), on other than fare face of brick surfaces of walls, finished even and smooth without using extra cement, including necessary scafolding and form works, complete all as specified complete all as specified and directed.

Material and labour for rendering 10mm thick in cement mortar (1:3), on ceiling, finished even smooth without using extra cement , complete all as specified and directed.

Supply and Fix GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. including all laps, cutting and waste complete all as specified and directed.

Material and Labour for preparation of new surfaces of by rubbing down and applying two coat of Plastic emulsion Paint (interior/exterior grade acrylic emulsion alkali proof, Ist quality) after a coat of priming paints, using necessay wall care putty to make surface even and smooth complete all as specified and as directed.

Material & Labour for preparing new plastered or unplastered wall surfaces, applying exterior wall care putty to make the surface even & smooth & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm with over new surfaces complete all as specified and directed.

Preparation of new ceiling surfaces applying two coats of oil bound distemper after applying a coat of primer, using necessary wall care putty complete all as specified and directed.

Material and Labour for 75 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection/pavings/shafts including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm complete all as specified and directed.

Material and Labour for hardcore of guage not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface brokene stone aggregate complete all as specified and directed.

Material and labour for 75 mm thick plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of floors, complete all as specified and directed.

Material and Labour for 25mm thick, plain cement concrete type B-0, 1:2:4 (12.5mm graded Aggregate) as in flooring all as specified and as directed by Engineer-in-Charge.

Material and Labour for full body Vitrified tiles matt finish 10mm thick (square/ rectangular) polished area of each tile exceeding 0.42 Sqm but not exceeding 1.00 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified & directed.

Material and Labour for double charged vitrified ceramic tiles matt finish 10 mm thick (Square/rectangular) polished area of each tile exceeding 0.42 Sqm but not excedding 1.00 Sqm as in skirting, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile including 10 mm thick backing or bedding layer in cement mortar 1:4 complete all as specified and directed.

Material and labour for First quality, glazed ceramic coloured tiles, 7-8mm thick, of size 300mm x 450mm on vertical surface such as in skirting, dados, risers to steps, etc., including 10mm thick screed or bedding layer in CM 1:4, set and jointed in neat cement slurry @ 3Kg/Sqm, including pointing in white cement mixed with pigment or coloured cement to match the shade of tiles,complete all as specified and directed.

Material and labour for 20 mm thick granite (of any type) work (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade of granite including screed bed or bedding layer of cement mortar (1:4) 10 mm thick for laying floor finishes, grinding and polishing complete all as specified and directed.

Matrial and Labour for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Surface Preparation: Existing Surfaces must be clean, even, and sound concrete. Remove oil, dirt, laitance etc. Crack treatment: Cutting and opening cracks to a depth of 10x10 mm V or U Shape by mechanical means. Cleaning al the dirt and loose particles by air pressure and wetting crack to attain SSD condition. filling the crack using Repair Polymer modified cement mortar. Bore Packing: Using AP Smartcare Repair Polymer over pipe and Internal side of concrete followed by filing high strength non shrink grout for a gap of up to 20mm (between pipe and concrete) before treating the surface with Waterproofing layer. Supplying and applying SmartCare Damp Proof Ultra, fiber reinforced elastomeric liquid waterproofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflectivity Index (SRI) of 105 on top of roof in three coats @ 1.8 Kg/sqmt to be reinforced, having minimum elongation of 350%, tensile strength 2.9Mpa and shall have crack bridging ability of up to 2.5mm and shall resist 10bars of hydrostatic pressure, reduces surfaces temperature up to 10 degree Celsius also IGBC certified (Indian Green Building Council) Certiticate will be provided by company. The system consists of self-priming with 33% water dilution followed by two undiluted coats of Damp Proof ultra, the fibermesh of 40 to 50 GSM must be sandwich between lst and 2nd coat of Damp Proof Ultra. (dry film thickness of complete application/system not less than 500 microns) and Ponding test to be done after application of material. 1 Note :-Authorized Applicator will do the work. 10 year warranty of roof treatment. Make: Smartcare Asian Paint or equivalent duly approved by accepting officer.

Supply and Fix stainless steel Diamond cut rectangular 304 grade Satin finish sinks of 1.00 mm thick sheet for kitchen with plugs, washers, waste pipes, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 525mmx450mmX250mm bowl size 475mm x 400mm x250mm with and including PVC waste pipe and S.S waste coupling 32 mm dia and making good to disturbed surfaces, complete all as specified and directed.

Material and Labour for Cutting chases in brick work, pinning in making good to facings where required and pointing in cement and sand mortar 1:3 to ends or edges of landings, steps, cills etc and cutting chases for concealed water tubing and making good, cutting not exceeding 10 cm in girth complete all as specified and directed.

Supply and Fix PVC floor trap 75mm, including 125mm dia SS grating doom with waste hole including jointing to waste pipe, fixed in cement concrete 1:2:4 complete all as specified and directed.

Supply and fixing bib tap long body, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, complete all as specified and directed.

Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 500 litres capacity ‘double layered’, hoisted and fixed in position including inlet, outlet and drain pipe with plug, complete all as specified and directed.

Supply and fixing PTMT ball valves, suitable for 20 mm bore iron pipe, (weight not less than 210 grams), ISI marked, high pressure, with high density plastic ball , with epoxy coated aluminium rod, complete all as specified and directed.

Supply and fixing Gun-metal globe or gate valves, with iron wheel head, screwed down, high pressure,heavy duty, ISI marked , screwed both ends for iron pipe or for unions of 20 mm bore dia, complete all as specified and directed.

Material and Labour for preparing new wood & wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

Material and Labour for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber rings, laid in floors or trenches of dia of 75 mm bore complete all as specified and as directed.

Material and Labour for Reinforced concrete pipes, 150 mm bore, class NP2, laid and jointed complete with and including collars laid in trenches at any depth, jointing and testing complete all as specified and directed.

Material and labour for Concrete bed to 150 mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, in PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregates complete all as specified and directed.

Material and Labour for PCC (1:2:4) type B-1, using 20mm graded crushed stone aggregates, as in coping, roof kerb, mud stops, kneelers, apex stones, bed plates,benching, water trough etc including weathering, slightly rounded or chamfered angle and throating, including necessary form work, complete all as specified and directed.

Material and labour for brickwork by using subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:4), complete all as specified and directed.

Material and labour for cement concrete (1:2:4) type B-2 using 40mm graded crushed stone aggregate as in surface channel and drian complete all as specified and directed

Cutting holes in existing man holes for connecting new drains, 150mm dia pipemaking good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4) type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

Supply and Fix Factory made precast Circular/rectangular manhole cover (dia 600mm) with collar medium duty having capacity not less than 10 Metric ton complete all as specified and directed

Material and labour for cement concrete in surface channel dain in PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) complete all as specified and directed.

Material and labour for extra for forming fair finished drain or channel 45cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc complete all as specified and directed.

Supply and Fix Factory made precast perforated rectangular drain cover (size 600mmx600mm) with medium duty having capacity not less than 10 Metric ton complete all as specified and directed

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for, in ground floor, in isolated wall/windows, chajjas, balconies, RCC tank, precast cover slab etc and removing rubbish out side MoD land, complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame), exceeding 1.5 sqm but not exceeding 4 sqm each and removal, including making good the disturbed surface in CM(1:4) and finishing as per existing specifications and removal of debris outside MOD land, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified & directed.

Supply and Fix powder coated Aluminium anodised, barrel tower bolt of 200mm length extruded section and fixed complete all as specified and directed.

Supply and Fix 4.8mm thick sheet glass frosted quality and glazing with existing aluminium frame or fixed with wooden beads having area not exc, 0.50sqm in each pane complete all as specified and directed.

Supply and Fix Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade ST-240 complete all as specified and directed.

Supply and Fix 6 mm thick polycarbonate sheet fixed with coach screws, aluminium flat iron and rubber beeding or silicon for making it leak proof complete all as specified and directed.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber rings, fixed to walls including suitable clamps as in rain water pipes of 110mm bore complete all as specified and as directed.

Supply and fixing PVC (SWR) bends/shoe any radius with rubber rings, fixed to walls with suitable clamps as in rain water pipes of 110mm bore complete all as specified and as directed.

Supply and Fix mild steel plain bar cut to length bent to shape required as in rungs, complete all as specified and as directed.

Material and Labour for Point wiring PVC insulated sheathed multistranded copper conductor FRLS cable using two single core 1.5 Sq.mm including concealed in wall/floor PVC conduit not less than 20 mm as per IS with all fittings such as bends, tee,junction boxes of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including pressed steel terminal box, provision of 3 mm thick plastic laminated sheet cover for mounting switches, sockets,fan regulators etc including all necessary wall cutting chasis and making good disturbed surfaces in cement mortar 1:3 and as per existing colour of white wash / paint / OBD / cement base paint complete all as specified and as directed.

Material and labour for Sub Main Wiring (in replacement) with two single core 2.5 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed colour code cables, drawn in and including PVC conduit of suitable size with and including one run of continuous multi stranded copper conductor 2.5 Sqmm (nominal area) FRLS PVC insulated and unsheathed colour code cable for earth continuity, 1100 volts grade , complete all as specified and directed. Note(s): (i) Two runs of 2.5 Sqmm main cable + one run of 2.5 Sqmm cable for earth continuity and PVC conduit shall be measured as one unit/one Running Metre.

Supply and fixing Modular white cover plate with frame of 3 module complete all as specified and directed.

Supply and fixing Modular white cover plate with frame of 4 module complete all as specified and directed.

Supply and fixing Modular white cover plate with frame of 6 module complete all as specified and directed.

Supply and fixing Modular metal flush box of 3 module complete all as specified and directed.

Supply and fixing Modular metal flush box of 4 module complete all as specified and directed.

Supply and fixing Modular metal flush box of 6 modular complete all as specified and directed.

Supply and fixing Modular switch 1 way 6 A, 1 module complete all as specified and directed.

Supply and fixing Modular switch 1 way 16 A, 1 module complete all as specified and directed.

Supply and fixing Modular fan regulator 120 w, 2 module complete all as specified and directed.

Supply and fixing Modular socket 6A/16 complete all as specified and directed.

Supply and fix blanking plate for 1 module switch complete all as specified and directed.

Supply and fix ceiling rose, three terminals, PVC/ isolated body, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electroni cregulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and fix Sheet metal enclosure (DB) single phase & neutral, double door 16 WAY way, 240 volt with 200 Amps rated bus bar & IP 54 protection complete all as specified and directed.

Supply and fix RCBO switch 100mA,four pole,63 A for earth leakage,overload and short circuit protection 100 mA, four pole complete all as specified and directed.

Supply and fix MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA, 'B' curve, complete all as specified and directed.

Material and labour, sand cushioning with a layer of dry river sand, 80 mm thick before laying of cable and 150 mm thick after laying of cables (punned down to 180 mm thick), in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18 cm), shall be considered for measurement and payment.

Material and labour, locally available, sub class `B’ bricks (old size), laid flat and dry perpendicular to the direction of cable adjacent to each other, in trenches over the cable for protection, complete all as specified and directed.

Material and Labour for providing cement concrete 1:3:6 type C-1 (20mm graded aggregate) as filling in door chowkhat complete all as specified and directed.

Note: The total amount shall subject to adjustment of credit of Rs 2300.00 for old Materials as per Schedule of Credit

Satyadev Builders (BID ID -3501982)