REPAIR/ MAINT OF OH/UG WATER STORAGE TANK, RO PLANT/WATER PURIFIER AND DOSING SYSTEM WITH ALLIED WORK UNDER AGE(I) AF MANAURI

Amount

Supply and fixing in replacement cast iron sluice valve heavy duty both ends flanged of class PN 1.6 ISI marked with high tensile forged brass spindle cast iron head operated wheel and cap, confirming to IS ; 14846 -2000 Part -1 including provision of both end flanged joints with 3 mm thick rubber gasket with suitable size bolts ,nuts and double washer complete suitable for 150 mm dia pipe complete. Note :- (i) Quoted rate shall be deemed to included cost of flange joints, nut bolt washer, packing material and necessary excavation & earth work etc all as site required.

Supply and fixing in replacement cast iron sluice valve heavy duty both ends flanged of class PN 1.6 ISI marked with high tensile forged brass spindle cast iron head operated wheel and cap, confirming to IS ; 14846 -2000 Part -1 including provision of both end flanged joints with 3 mm thick rubber gasket with suitable size bolts ,nuts and double washer complete suitable for 100 mm dia pipe complete. Note :- (i) Quoted rate shall be deemed to included cost of flange joints, nut bolt washer, packing material and necessary excavation & earth work etc all as site required. Make:- Kirloskar / VIR

Supply and fixing in replacement cast iron sluice valve heavy duty both ends flanged of class PN 1.6 ISI marked with high tensile forged brass spindle cast iron head operated wheel and cap, confirming to IS ; 14846 -2000 Part -1 including provision of both end flanged joints with 3 mm thick rubber gasket with suitable size bolts, nuts and double washer complete suitable for 80 mm dia pipe complete. Note :- (i) Quoted rate shall be deemed to included cost of flange joints, nut bolt washer, packing material and necessary excavation & earth work etc all as site required. Make:- Kirloskar / VIR

Labour for dismantling, repair re-mentling, granding and re -assembling threading at workshop by lath matching to spindle of sluice valve in all size make model etc with replacing to required spare such as nut bolt washer pressure plate cast iron housing inter lock packing material etc to all site required work for making serviceable including transporting site to workshop and back as same complete all as directed.

Supply and replacement to spindle of sluice/ NR or air release valve made out by brass with cast iron lock nut suitable for 150 to 100 MM dia sluice valve specification all as per sample with required nut bolt washer pressure plate packing material etc to all site required work for making serviceable complete all as directed.

Supply and replacement to spindle of sluice / NR or air release valve made out by brass with cast iron lock nut suitable for 80 MM dia sluice valve specification all as per sample with required nut bolt washer pressure plate packing material etc to all site required work for making serviceable complete all as directed.

M&L for painting on existing CI pipe line network in Installation using synthetic enamel deferent colour paint in two coat ( one as finishing) over one coat of red oxide primer after removing ,scraping cleaning etc to old paint with given sign marking on all size /dia / make / type etc of water pipes / control valves etc all as directed.

Supply, installation testing connecting in replacement to induction motor suitable for Aquafit water treatment chemical mixture tank VST 1006, 220 volts single phase 950 RPM 120 (0.5 HP) model IM -10 with long spindle in original manufacturer etc all as given sample complete . Make ;- As per sample

Supply installation connecting in replacement to Aquafit chlorine Dosing system preparation tank model No AQUA1006 of net capacity 170 Litters made out FRP dia 650 x net height 375 + conical 300 mm gross height with stand 1000 mm consisting of water inlet outlet with Y strainer, drain over flow level gauge , agitator 120Watt 900 RPM single phase flange mounted motor with plastic shaft and impeller and service tank model No AQUA 1006 with high pressure single head adjustable chlorine dosing system induction motor suitable for Aquafit water treatment chemical mixture tank VST 1005, 220 volts single phase 950 RPM 746W (1 HP) with long shaft and fan for mixing to chemical in original manufacturer etc all as given sample complete . Make ;- Aquafit Model VST 1005 / As per sample

Supply only calcium hypochlorite granules dry chlorine water purifier chemical for drinking water confirm to ISO 9001, 14001 & 8001 certified 65% to 70% chlorine content in granular (calcium based granular disinfectant for for water trestment packed in plastic drum 45 Kg each complete Make ;- Puri Chlor

S&F in replacement for galvanised Nut bolt and washer in as required size ISI marked suitable for bracing / jointing to water rising main line complete

Supply and fixing in replacement to water pressure gauge fixing on water pumping line suitable for measuring to discharge of borewell upto 15000 GPH with 0 to 50 Kg/ Cm 2 PSI in original manufacture ISI marked including cutting making hole welding etc fixing with outlet discharge cast iron pipe in 150 MM dia of bore complete with other site work and directed. Make :- Vevo

Supply and fixing in replacement to CPVC fixing accessories such as "T" / elbow / union / stop cock / end plugs / sockets etc as required in size 25 MM dia of bore water pipe ISI marked complete. Make-; As per Sample

Removing /disconnecting to centrifugal pump set from existing location after removing to suction and discharge connections, de-coupling , removing pumps in capacity upto 15 HP , open to body motor /Pump for replacing to unsv defective part carefully including re-assembling, painting to body using heat synthetic enamel paint in two coat, testing connecting etc to all as per existing, nut bolt washer and packing etc assembling re-fixing connecting making connection testing on full load etc complete all as directed. Note :-(i) Required spares will be measured and paid separately against respective items of this schedule as supply only. (ii) Transportation charge (if required) from site workshop and back shall deemed to be including quoted rates.

M&L for re -winding to burnt out winding of 15 HP capacity centrifugal motor primary winding (stator) as same in existing size /gauge/ No of turns / qty of insulation etc using superior quality water proof copper winding wire ISI marked original manufacturer and submersible copper cable in required length and size for making connection minimum 1.5 Mtrs long outside , re-assembling ,full load testing , heating, drying , varnishing, overhauling, re-installation, commissioning, testing and connecting up including replacing to set of bushes , bushes sheets , bearing greasing complete in following capacity all as directed. Note : (i) Testing shall be done by contractor after installation at site. Payment of item shall be allowed after functioning of installation (ii) Quoted rate shall be including all required work at site for making functional to pump motor set and cutting, removing to burned windings from the motor body etc all.

M&L for re -winding to burnt out winding of 5 HP capacity centrifugal fountain motor (water proof) primary winding (stator) as same in existing size /gauge/ No of turns / qty of insulation etc using superior quality water proof copper winding wire ISI marked original manufacturer and submersible copper cable in required length and size for making connection minimum 1.5 Mtrs long outside , re-assembling ,full load testing , heating, drying , varnishing, overhauling, re-installation, commissioning, testing and connecting up including replacing to set of bushes , bushes sheets , bearing greasing water proofing materials complete in following capacity all as directed. Note : (i) Testing shall be done by contractor after installation at site. Payment of item shall be allowed after functioning of installation (ii) Quoted rate shall be including all required work at site for making functional to pump motor set and cutting , removing to burned windings from the motor body etc all.

Supply and fixing in replacement water sprinkles nozzle of fountain made out by copper water tube heavy duty 2.5 mm thick and 60 mm long minimum single pointed nozzle or multi nozzle round in shape with cooper tube heavy duty threading on both end minimum 1 feet long etc all as site required including threading making holes welding, cutting, jointing, fixing etc stay on high pressure etc all as existing complete. Make :- As per sample

Labour for disclaring to rusted nozzle of fountain using chemical wire brush re-assembling and assembling including de-watering , cleaning to fountain water storage tank in all capacity removing all slugs dry leafs fungus and waste material and depositing as directed 50 Mtrs above the site minimum complete all as directed.

Supply and fixing in replacement cast Iron NRV (Non return Valve) confirming IS; 5312;1984 Part -1 , ISI marked IS ; 1538 PN - 1.0 in size 150 mm dia of bore with all fitting including jointing materials such as nuts, bolts, washers and rubber gasket etc of suitable size all site work and directed. Make - Kirloskar / Bir / as per list of makes

All as per item No.19 above but in size 80 mm dia

Supply and fix in replacement of submersible flat copper cable conductor 3 core 10 Sqmm 1100 volts grade ISI marked heavy duty complete all as specified and directed. Make ; Finolex/ KEI/ Plaza

All as above item No 21 above but in size 3 core x 16 sqmm .

Material and labour in replacement of water level indicator assembly of over head reservoir complete with float valve made out of copper sheet 1.6mm thick of size 30x30x30cm cubical connected with suitable length of SWR of size 6mm dia one end and other end fixed with arrow mark made out of MS sheet of suitable size rolling over the wheel 02 Nos fixing with RCC wall including painting letter of size 4 cm x 4 cm writing and making all as per site requirement all as specified and directed. Make ; As per sample

Supply and fixing in replacement water proof fountain LED light fitting under water capacity 6x3 (18 w) Watts, full multicoloured ( in colour Red ,yellow and green), IP- 68 , 240 volts DC, 50 HZs energy saver environment friendly , luminary wide beam super magnifying lens (MOCSS 304GR)surface / clamp mounting with controller (DMX-512) fixing arrangement as per existing making all electric connection with complete current leakage proof with three core copper cable and all other required accessories directed by Engr-in-charge. Make. RGP underwater Series, model (F- 26, 26 A) Note :- Warranty certificate with minimum 02 years warranty shall be deposited by contractor.

Supply and fixing in replacement multicore PVC insulated copper conductor cable 4 core 2.5 Sqmm 1100 volts grade complete all as specified. Make - Legrand/ Havells/ Plaza

Supply and fixing in replacement RGB LED Controller to be control for controlling colour ratio of light complete making electric connection all as directed by Engr-in-charge. Make. RGP underwater Series, model DMX-512

Supply and fixing in replacement constant voltage /current LED driver input AC 220-250 voltage output DC Controller for electric circuit all as directed by Engr-in-charge. Make. RGP underwater Series.

Supply and fixing in replacement stainless steel 304 Grade stand/ ABS casing for 6x3 watt LED light complete all as directed.

Material & Labour for chemical to burn out the shrub/grass/ unwanted small trees etc 100% in outfit area of electrical substation located at E/M installations in AOR spread by using spray gun equally in a given time interval as directed. Note: Chemical sample shall be supplied in sealed container 2 to 5 Ltrs each after approved by Deptt. Make :- Glycel

Draining out the over head water reservoir/ underground water tank complete in capacity upto 1 Lakh gallons using pumps set for de-watering and through in nearby drain. Cleaning / scarbing with wire brush / broom and washing with bleaching powder mixed water, etc all taking out from inside the tank in 1st phase after that all in side surface cleaning by chemical upto zero vectria removing slugs / waste material and depositing where as directed minimum 50 Mtr above from site incl white washed in two coat in side the tank surface and refilling as same complete with all site required work and directed. Note :- Quoted rate shall be including cost of repairing material cause damage during above work.

Supply and fixing in replacement to strainer made out by GI 4 mm dia solid rod net in 1 feet long fixed minimum 10 MM interval suitable for 100 MM dia of pipe including threading replacing of socket etc all as complete all as directed.

Supply in replacement to gland packing with wire in size 1/2 inches dia re-packing with shaft of pumps/ spindle of sluice valve etc including de-assembling and assembling all as site required complete.

Supply in replacement to gland packing with wire in size 1 inch dia re-packing with shaft of pumps/ spindle of sluice valve etc including de-assembling and assembling all as site required complete.

Supply and fixed in replacement star delta starter in sheet metal enclosure type ML 2 type fully automatic suitable for 35 HP(26 KW) submersible motor, 415 V, 50 Hz, 3 phase, relay range 20 to 32 Amps ,single phasing, phase reversal, phase imbalance, autor restart feature, vibration proof enclosure with IP 54 protection class, Indications offered - ON/OFF, voltage and Amp complete all as specified and directed. Make; L&T Cat part No SS90705 or equivalent Schneider/ Siemens /ABB / as per list of makes

Excavation in trenches soft/loose soil not exceeding 1.5 Mtrs wide in not exceeding 1.5 Mtrs in depth for foundation etc or for shaft well, cesspits, manholes, pier hole etc not exc 10 Sqmm on plan and not exceeding 1.5 Mtrs in depth and getting out complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers each not exceeding 25 cm thick in soft/loose soil.

Removing excavated surplus soil to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 metre above the starting point.

M&L for run lead joint to spigot and socket pipes in size 150 mm dia of pipe complete Note:- Quoted rates shall be included cost of earth work as site required.

M&L for cast iron fittings in size as required such as bend tapers tee pieces (single & double branch) any type and angle and angle /radius and straight connecting pieces but all ends flanged complete.

M&L for for covered box made out by GI sheet minimum 4 mm thick in suitable size minimum 60 CM X 60 CM with 80 CM height with mounting bracket (internal size minimum 6 inches working space around the valve ) as site required to cover the stop valve/ fire hydrants / hose box for hose reel of 20 mm size of 30 meter length complete with coupling branch pipe and nozzle , MS sheet 2 mm thickness etc with locking arrangement front side door hinges mounting on GI angle frame in size 30x30 MM 5 mm thick and grouting in cement motor in ratio 1:3 ( minimum 15 CM in ground ) including painting in both side surface by two coat red colour over one coat of red oxide primer and marking (as given by Deptt) in std size using different colour complete including taking down of existing all as site required cutting welding jointing etc all work and directed

M&L for repacking stuffing box of sluice valve spindle including taking apart and reassembling for size 150 MM bore of pipes complete.

Supply & fix in replacement of fire hydrant landing valve type A (single head outlet) of 63 mm dia conforming to IS 5290 complete .Make: As per sample

M& L for Complete repair servicing ant testing of "Reverse Osmosis Water Treatment Plant of capacity 5000LPH" including complete checking of water supply line including valves etc for leakage including replacement of rubber gasket of valves complete to entire satisfaction of Engr-in-Charge.

S&F in replacement of the following unserviceable/damaged items as under:-

[a] RO Membrane type spiral wound membrane of dia 200 mm of Make : Hydronautics / DOW/ GE/ Torry Japan as approved by Engr-in-Charge.

[b] Rota meter with clear indication of levels including low pressure switch

[c] 40mm PVC joint socket.

[c] 20mm PVC joint socket.

Servicing, cleaning / washing to water filter Eureka Forbs Purifier and filter assembly for replacing to unsv defective spares complete all as directed. Note- Spares will be measured and paid separately as supply only against respective items of this schedule. Make:-As per sample

Supply and replacement of PF candle filter for two filter in one set (set of three) Make: As per sample

Supply and replacement of carbon with carbon block granular Make: As per sample

Supply and replacement of SV Filaments with coil Make: As per sample

Supply and replacement of PF inlet nozzle and outlet of purifier two Nos each

Supply and replacement of PCB plate for one set filter Make: As per sample

Supply and replacement of 1/4'' PVC pipe superior quality Make As per sample

Supply and replacement of 1/2'' PVC pipe superior quality. Make:- As per sample

Supply and fixed in replacement of flood light fitting LED minimum 200 W equipped with IP66 protection to be fix on pole/ wall etc all as site making all connection using suitable three core flexible copper cable drawn through in flexible conduit pipe from control box to light fittings complete all as directed. Note :- (i) Fitting shall be of Make : Bajaj cat No BJFL 200W LED I (AMAZE LED) or Crompton cat Part No LFLN-200-CDL/60-M (PLUTO NEO) or equivalent model of make philips/ Wipro. Light fitting of other make of higher capacity may be used without any price adjustment. (ii) Cable from MCB to fitting shall be included in unit rate quoted by contractor.

Supply and fix in replacement star delta starter in sheet metal enclosure type MU-G30H fully automatic suitable for upto 45 HP submersible motor, 415 V, 50 Hz, 3 phase, relay range 60 Amps , conforms to IS /IEC 60947-4-1 & IEC 60947-4-1, protections offered - overload, single phasing, phase reversal, phase imbalance, autor restart feature, vibration proof enclosure with IP 54 protection class, Indications offered - ON/OFF, voltage and Amp complete all as specified and directed. Make; L&T / Schneider/ Siemens / as per list of makes

S&F in replacement Single phase preventer suitable for 35/40 HP motors, 415 volt, 59 HZ including making all electrical connection including taking out unserviceable preventer from site complete. Make:- Cat part no- CS94824LOOO of L&T or equivalent as per list of makes

S&F in replacement overload relay of range 28 to 40 Amp at 415 volts complete all as specified and as directed. Make : Cat part no- 2AODT5/2ANDT0 of L&T or equivalent make as specified in Appendix B to particular specification.

S&F in replacement contactor ML-3 of range 40-50 Amp at 415 volts complete all as specified and as directed . Make: L&T /Schneider / C&S

S&F in replacement contactor ML-3 of range 32-40 Amp at 415 volts complete all as specified and as directed. Make: L&T /Schneider / C&S / as per list of makes

Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri if not specified in BOQ

M/S SATISH KUMAR

shubham construction

M/S VIJAY SINGH

M/S R S Traders

m/s neeraj kumar shukla

singrourenterprises

M/s Techno India and Company