REPAIR/MAINT OF PUMP PANELS, CLEANING OF UG SUMP AND OH RESERVOIRS AND ALLIED WORKS AT AYODHYA CANTT UNDER AGE (I) AYODHYA.

Amount

Cleaning of RCC overhead reservoirs internally of capacity 100000 gallons on upto 21 metre high staging at PH No. 1,3,4,5,6,7 & 9 including removing deposits, sand etc from inside the tank, scrubbing and washing side walls and bottom of inside tank with bleaching powder solution and making surface free from any fungus/ algae/ vegetation, filling of cavities inside of tank with cement mortar 1:3 mixed with quick settling chemical and applying one coat of white wash inside dome.Writing date of cleaning outside the tank complete all as specified and directed including cleaning of wash out system as required for proper flushing out of dirts/ deposits of over head tank. Note :- (i) All type of T&P and Labour etc shall be arranged by the contractor and rate for the same deemed to be included in the quoted rate. (ii) Contractor will dispose off the material taken out from the installation at appropriate location upto 50 mtr as directed by Engineerr-in-Charge.

All as per Item No. 01 above but RCC OH reservoir of capacity 50000 gallons at PH No. 2 (two nos),3,4,5,8,10,11 & 12 complete all as specified and directed by Engineerr-in-Charge.

Cleaning of Under Ground Sump internally as well as externally of capacity upto 10000 gallons at Swarn & Naubat Coy DRC, PH 10 & auditorium after pumping out of residual water including removing deposit, sand from inside the sump, scrubbing and washing side walls and bottom with bleaching powder solution and making surface free from any fungus/ algae/ vegetation, filling of cavities inside and outside of tank with cement mortar 1:3 mixed with quick settling chemical and applying one coat of white wash inside including top side & writing date of cleaning outside complete all as specified and directed. Note :- (i) All type of T&P including portable non-clog pump for pumping out residual water before cleaning and Labour etc shall be arranged by the contractor and rate for the same deemed to be included in the quoted rate. (ii) Contractor will dispose off the material taken out from the installation at a distance upto 50 Mtr as directed by Engineer-in-Charge.

M&L for applying two coats of cement based paint on all external surface of overhead reservoir of capacity 100000 gallons including coulms and beams of staging up to 21 metre high after scraping/ preparing of old surfaces and two coats of synthetic enamel paint on Inlet, outlet, overflow and washout CI/ GI/ DI pipes and complete staircase as per existing colour from ground level up to top of the reservoir complete all as specified and directed by Engieer-in-charge. Note: - (i) Before applying cement paint, the surface shall be thoroughly wetted to control surface suction. (ii) Not less than 24 hours shall be allowed between two coats and the second or subsequent coat shall not be started until the preceding coat has become sufficiently hard to resist marking by the brush being used.

All as per item No 4.00 above but for overhead reservoir of capacity 50000 gallons complete all as specified and directed by Engineer-in-charge.

M&L for applying two coats of synthetic enamel paint on CI/ DI pipes of distribution header including sluice valves of various pump houses after scraping/ preparing of old surfaces complete all as specified and directed by Engineer-in-charge.

M&L for removing honey comb grown on outer surface of RCC overhead reservoirs of capacity 100000/ 50000 gallons on upto 21 metre high staging and applying two coats of cement based paint on the affected area duly matching with the existing colour all as specified and as directed by Engineer-in-charge. Note:- The work shall be carried out by professionals and department will not take any responsibility in case of casuality caused by honey bees.

M&L in replacement of self reflector type flexi board with PVC frame of size 1.2mx0.8m including diagram of water disribution network at each pump house/STP complete all as specified and directed by Engineer-in-charge.

M&L for rolled mild steel in Joist ,channel,angle, or tee sections, fixed independently, without connecting plates, etc. for repair to staircase,hand rails,back rest of over head reservoir, gate etc or as specified and directed by Engr-in-charge. Note: All T&P including welding machine and labour charges for working on OH tanks upto 21 mtr high staging deemed to be included in the quoted rate.

M&L in repair and replacement of top cover of OHT of size 1050mmx1050mmx1050mm (internal dimension) with mild steel sheet cover of 6mm thick and angle iron of size (50mm x 50 mmx 6mm) frame around of hole, locking arrangement with pad lock of size 50mm brass, 6 leavers and in duplicate key (Make - Godrej) complete including two coat of approved synthetic enamel paint over one coat of red oxide primer on prepared steel surface complete all as specified and directed incuding PCC plaster etc complete all as specified and directed by Engineer-in-charge.

M&L for connecting Aviation light of capacity 20 watt on top of overhead reservoir at upto 21 mtr high staging including taking out of old one make: Bajaj or equivalent all as specified and as directed by Engineer-in-charge. Note: All T&P and labour charges for working on OH tanks upto 21 mtr high staging deemed to be included in the quoted rate.

M&L for Air termination, single pointed aluminium rod 12mm dia and 300mm long for fixing on top of overhead reservoir at upto 21 mtr height including taking out of old one all as specified and as directed by Engineer-in-charge. Note: All T&P and labour charges for working on OH tanks upto 21 mtr high staging deemed to be included in the quoted rate.

M&L for repair and maintenance of microprocessor based circuit type water level device consist of seven segment 2 " LED display fitted in the control panel with display of water level in tank including replacement and repair of faulty minor parts like IC, level sensor pipe fitted in the tank by clamping at the bottom and the top of the tank,magnetic float and electronic switch, Toggle switch for manual/automatic run of pump when tank is full , heavy duty rubber coated wire (apprx 100 mtrs) for connecting the sensor to the tank complete all as specified and directed by Engineer-in-charge.

M&L for microprocessor based smart water level controller with sensor integration via screw terminals with the on – field configuration for overhead tank. Indication for 5 sensor reading per tank ( 0%, 25%, 50%, 75%, 100%) display interface with 4.3” TFT LCD screen with 32bit microcontroller unit, fixed resolution 480 X 720 pixels. Operating temperature for device -20 to 70 Degree C. The controller must support I/O based controls over 8 Bit 8051 Base Microcontroller Unit with support for Buzzer/Alarm at 25% and 100% capacity to operate On/Off operations. Manual Override option (toggle switch) to override the controls from Auto mode. The enclosure is made of ABS Material for IP protection. ( Dust and water resistance) Make:- Sathya Sai complete all as specified and directed by Engineer-in-charge.

M&L for SS 304 horizontal magnetic float switch with SS pipe for sensor mounting ( 5% Nos. Sensor ) in the tank by clamping at the bottom and the top of the tank consist of magnetic float complete all as specified and directed by Engineer-in-charge.

M&L for 7 core copper alloy signal cable with weather proof rubber coating complete all as specified and directed by Engineer-in-charge.

M&L for Hose box made of 18 gauge MS Sheet with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside for yard hydrant (suitable for housing 2 Nos Hose reel drum for 36 m long hose of size not less than 800mmX600mmX250mm) including taking out of old one all as specified and directed by Engineer-in-charge.

S&F Hose reel drum with hose pipe 36m long including male/ female brass coupling for fixing with fire hydrant valves including taking out of old one complere all as specified and directed by Engineer-in-charge.

S&F branch pipe gun metal 63mm instantaneous inlet, made threaded outlet, 15mm bore nozzle short including taking out of old one all as specified and directed by Engineer-in-charge.

S&F First AID Kit Box-wall mount-multi compartment of size height 32cm, width 28cm,depth 8cm made from high grade GI metal with 6 way processed powder coating for anti rust proof with front glass fitted,3 shelf, security lock on door to accomodate all necessary items such as (i) 1 Burnol tube (ii) 2 Soframycine Cream (iii) 1 Dettol liquid 100ml (v) 1 Pc Sterlile Wound Dressing (vi) 2 Strip Paracetamol (vii) 10Electral Sachet-36 (viii) 3 Sanitiser 200ml (xii) 15 Pcs Adhesive Bandage (xiii) 2 Pc Heavy Crepe Bandage width 7.5x3 cm etc complere all as specified and directed by Engineer-in-charge.

S&F ABC powder type fire extinguisher 4 KG suitable for electrical fires along with wall hook and discharge pipe complete with ISI,BIS mark, ISO and CE certified product complete of make ECO Fire or equivalent complete all as specified and directed by Engineer-in-charge.

S&F Three phase submersible pump controller with single phase preventer of rating 3 phase,415V,50 HZ, 40 HP ,Type MU-G40 FASD, of make L&T, Sceinider or equivalent including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F MCCB 4 pole 100 Amp, 415 volt, of make: L&T or equivalent in existing panel including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F On load Changeover 4 pole 100 Amp, 415 volt, open execution type of make: L&T or equivalent in existing panel including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F On load Changeover 4 pole 200 Amp, 415 volt, in Sheet Steel Enclosure type of make: L&T or equivalent including taking out of old one all as specified and directed by Engineer-in-charge.

S&F digital type Voltmeter with LED display suitable for 3 phase of make: L&T or equivalent in existing panel including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F 3 pole power contactor 220/440 volts with 70 Amp AC3 duty rating any type including auxillary switch of make: L&T or equivalent in existing panel including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F electronic timer for automatic star delta starter 415 volt 50 Hz 3 - 30 sec of make: L&T, in existing panelincluding taking out of old complete one complete all as specified and directed by Engineer-in-charge.

S&F digital type Ammeter with LED display suitable for 3 phase make: L&T or equivalent in existing panel including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F On load Changeover 4 pole 100 Amp, 415 volt, in sheet steel enclosure type of make: L&T or equivalent including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F tape wound ring type Current Transformer suitable for Bar primary of rating 100/5 Amp, burden 5 VA of make: Kappa/ Matrix or equivalent in existing panel including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F Single phase Preventer Relay with adjustable time delay 30 sec to 5 min suitable for 415 volt AC, any type of make: L&T or equivalent including internal wiring from switchgear to relay in existing panel including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F overload Relay any type suitable for 5 Amp to 30 Amp type ML 415 volt AC of make: L&T or equivalent including internal wiring from switchgear to relay in existing panel including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F overload Relay any type suitable for 32 Amp to 88 Amp type MPR of make: L&T or equivalent including internal wiring from switchgear to relay in existing panel including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F Indicator lamp LED type (R,Y,B) complete with bakelite fuse complete including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F ON and OFF push button flush head type (Red,Green) complete including taking out of old one complete all as specified and directed by Engineer-in-charge.

M&L for copper lugs 16 sqmm complete including taking out of old one complete all as specified and directed by Engineer-in-charge.

S&F of Flat three core submersible cable PVC insulated and sheathed multistranded copper conductor of cross sectional area 16 sqmm of make: Havells , Kalinga ,Polycab or equivalent complete all as specified and directed by Engineer-in-charge.

Supply only lead acid battery heavy duty 12 volt 180 Ah including initial charge of make: Exide or equivalent complete all as specified and directed by Engineer-in-Charge

S&F LED street light fitting 100W Rectangular LED Flood Light with innovative thermal management and available in multiple optics and equipped with IP66 protection with required connection wire multistand 2.5 Sqmm twin core sheathed weather proof up to ACSR conductor/ Ceiling rose complete all as specified and directed by Engineer-In-Charge. Make:- Crompton or Equvalent of Bajaj/Philips

S&F FR PVC Insulated Single core multi stranded unsheathed Industrial Flexible cable of size 16 sqmm conforming to IS 694:2010 with bright annealed copper conductor in existing panel including taking out of old one complete all as specified and directed by Engineer-In-Charge. Make : Polycab or equivalent .

M&L for disconnecting electrically incomming and outgoing LT UG cable of LT panel/ AMF panel of any size and replace burn/unsv suitable size of aluminium bus bar, Welding work for hinches and doors, fixing the locking arrangement including scraping outdoor/indoor side of LT Panel and one coat of redoxide, two coat of synthetic enamelled seimens gray spray of outdoor/Indoor side and reconnecting LT UG cable with fixing aluminium lugs by using crimping tool, nut, bolt washer etc and all necesary work required for smooth functioning of LT panel complete all specified and directed by Engineer-in-Charge.

Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purposeas per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2mx1m complete all as specified and directed by Engineer-In-Charge

M&L for Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, connected with GI strip 25x4mm by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI strip is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontally to the equipment. Cement concrete chamber of PCC (1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm complete all as specified and directed by Engineer-In-Charge and shown in Electrical Plate No- 3 of SSR Part-1 (2009).

S&F only earth lead GI strip 25mmx4mm complete all as specified and directed by Engineer-In-Charge

Repair and maintenance of Granular Chlorination Reciprocating dosing pump (Model: 96 NGQ 51), high pressure, single head, gear motored adjustable dosing pump having output of 2 U.S. GPD to 40 U.S. GPD and adjustable high pressure of up to 100 PSI including minor spare parts like, tubing, connection nuts, injection check valve, clay weight, ferrules, water inlet pipe line, outlet with strainer,drain pipe, overflow pipe etc complete all as specified and directed by Engineer-In-Charge.

Supply only white crystal alum ferric of superior quality duly packed, complete all as specified and directed by Engineer-In-Charge

Supply only copper sulphate blue crystal of superior quality duly packed complete all as specified and directed by Engineer-In-Charge

Supply only soda ash of superior quality complete all as specified and directed by Engineer-In-Charge

Supply only sodium hypochloride liquid (chlorine content 10%) duly packed in sealed drum of make: M/s Declibac/ M/s Rayalshima Enterprise/ Bajaj Chemicals or equivalent complete all as specified and directed by Engineer-In-Charge

M&L for replacement of silica sand media and gravel from pressure sand filter sectional mesh type multi graded complete including cleaning of filter tank with suitable chemicals complete all as specified and directed by Engineer-in-charge.

Lifting of defective submersible pump set any make & model of capacity 25 HP to 45 HP from deep well 350mm housing along with connected accessories such as column pipe of 150mm dia appx 30 m submersible cable, steel pipe, spider, sleeve, line shaft, nut, bolts etc complete all as specified and directed by Engineer-In-Charge. Note:- (i) All type of T & P, chain pulley & tripod etc required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate. (ii) The Contractor will start the lifting work with in minimum time after getting message verbally/telephonically by JE E/M/AGE E/M. (iii) A penalty of Rs. 500/- per day will be imposed on the Contractor for wilful delay by the Contractor will be imposed as per opinion of Engineer-in-Charge and amount will be deducted from the due payment of the Contractor]

Transportation including loading & unloading of defective submersible pump set 3 phase any make and capacity 25 to 45 HP from pump house to work shop for necessary repair and transporting back to the pump house including carefully loading & unloading of pump set after repair complete all as specified and directed by Engineer-In-Charge.

Dismantling of defective submersible pump set any make & model of capacity 25 HP to 45 HP, repairing the same including replacing old unserviceable parts and re-assembling and testing after repair complete all as specified and directed by Engineer-In-Charge. Note: (i) All the spares required for repair will be measured and paid seperately as supply only. (ii) Greasing of moving parts deemed to be included in the quoted rate.

Supply only CI/ MS bowl (As per existing size) for submersible pump capacity 25 HP to 45 HP any make & model complete all as specified and directed.

All per item No.57.00 but Stainless steel shaft with key complete all as specified and directed.

All per itemNo.57.00 but Gun Metal Bush complete all as specified and directed.

All per item No.57.00 but Stainless steel sleeve complete all as specified and directed.

All per item No.57.00 but Sand Guard complete all as specified and directed.

All per item No.57.00 but Impeller lock with key complete all as specified and directed.

All per item No.57.00 but Neck ring (as per existing size and type) complete all as specified and directed

All per item No.57.00 but Turning & polishing of Pump shaft (lathe work) complete all as specified and directed

Supply only Stainless Steel thrust bearing. parts for submersible motor of capacity 25 HP to 45 HP any make & model complete all as specified and directed.

All per item No..65.00 but Carbon plate complete all as specified and directed.

All per item No..65.00 but Rotor Gun Metal/steel bush complete all as specified and directed.

All per item No..65.00 but Rubber bush complete all as specified and directed.

All per item No..65.00 but Upper housing complete all as specified and directed.

All per item No..65.00 but Lower Housing complete all as specified and directed.

All per item No..65.00 but Turning, polishing of Rotor & shaft (Lathe work) complete all as specified and directed.

Rewinding of submersible motor capacity 25 HP to 45 HP any make & model with super enamelled copper wire of existing size including removal of existing burnt winding, cleaning of slots including packing material, connection and testing complete all as specified and directed.

M&L for painting to pump set with two coat of synthetic enamel paint (grey colour) over a coat of red oxide primer after preparation of surface complete all as specified and directed by Engineer-In-Charge.

Lowering, connecting, commissioning testing of repaired submersible set any make and capacity 25 HP to 45 HP 3 phase 415V into bore well 300/200mm with connected items such as column pipe approx 40 RM, properly connecting submersible cable etc complete all as specified and directed by Engr-In-Charge by Engineer-in-Charge. Note:- (i) All type of T & P, chain pulley & tripod etc required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate (ii) The Contractor will start the lifting work with in minimum time after getting message verbally/ telephonically by JE E/M/ AGE E/M. (iii) A penalty of Rs. 500/- per day will be imposed on the Contractor for wilful delay by the Contractor will be imposed as per opinion of Engineer-in-Charge and amount will be deducted from the due payment of the Contractor.

Repair and maintenance of defective Monoblock motor pump any make & model of capacity 20 HP including required repairing like motor rewinding, replacement of minor spares like Motor bearing, Gland packing, Fan motor blade, Packing paper, Water seal, Starting Coil, Motor housing, S.S . sleeve repairing on Lathe ,Impeller Brass, Gun Metal Bush, Rubber Coupling belt, Rubber bush, Rubber gasket, nut bolt & any other minor connected items and testing after repairing including painting complete all as specified and directed by Engineer-In-Charge. Note: All type of T&P including dismantling and fixing required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate.

Repair and maintenance of defective Monoblock motor pump any make & model of capacity 10 HP including required repairing like motor rewinding, replacement of minor spares like Motor bearing, Gland packing, Fan motor blade, Packing paper, Water seal, Starting Coil, Motor housing, S.S . sleeve repairing on Lathe ,Impeller Brass, Gun Metal Bush, Rubber Coupling Set, Rubber bush, Rubber gasket, nut bolt & any other minor connected items and testing after repairing including painting complete all as specified and directed by Engineer-In-Charge. Note: All type of T&P including dismantling and fixing required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate.

Repair and maintenance of defective Monoblock motor pump any make & model of capacity 7.5 HP including required repairing like motor rewinding, replacement of minor spares like Motor bearing, Gland packing, Fan motor blade, Packing paper, Water seal, Starting Coil, Motor housing, S.S . sleeve repairing on Lathe ,Impeller Brass, Gun Metal Bush, Rubber Coupling Set, Rubber bush, Rubber gasket, nut bolt & any other minor connected items and testing after repairing complete all as specified and directed by Engineer-In-Charge. Note: All type of T&P including dismantling and fixing required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate.

Repair and maintenance of defective Monoblock motor pump any make & model of capacity upto 2.5 HP including required repairing like motor rewinding, replacement of minor spares like Motor bearing, Gland packing, Fan motor blade, Packing paper, Water seal, Starting Coil, Motor housing, S.S . sleeve repairing on Lathe ,Impeller Brass, Gun Metal Bush, Rubber Coupling Set, Rubber bush, Rubber gasket, nut bolt & any other minor connected items and testing after repairing including painting complete all as specified and directed by Engineer-In-Charge. Note: All type of T&P including dismantling and fixing required at site will be arranged by the contractor and rates for the same deemed to be included in the quoted rate.

Taking out unserviceable sluice valve/ non return valve100 mm bore from water mains complete all as specified and directed by Engineer-In-Charge.

All as per item No. 79.00 but 150mm bore complete all as specified and directed

S&F connection & testing sluice valve 100 mm bore 'ISI marked' both ends flanged and drilled cast iron body class PN-1.6 conforming to IS-14846/2000 complete with gun metal spindle including necessary nut bolts and gasket etc for fixing and taking out of old valve complete all as specified and directed by Engineer-In-Charge of the following sizes :- Note: For sluice valves fixed with pillars of over head tank, breaking of RCC/lead/ flange joints and repairing the same after fixing of valve deemed to be included in the quoted rates.

All as per item No. 81.00 but 150 mm bore complete all as specified and directed .

S&F Nun return valve 150 mm bore including nut-bolts with necessary rubber/gasket packing complete all as specified and directed by Engineer-In-Charge.

M&L for rectification of leakage of 50mm bore GI Pipe line joints including excavation, returning and filling etc including fittings like unions, sockets, bends, elbows, tees, nipples etc as required complete all as specified and directed by Engineer-In-Charge

All as per item No. 84.00 here-in-before but 25 mm bore complete all as specified and directed

All as per item No. 84.00 here-in-before but 20 mm bore complete all as specified and directed

All as per item no. 84 here-in-before but 15 mm bore complete all as specified and directed

Taking out steel water tubing/ UPVC for 20 mm bore size including fittings complete all as specified and directed by Engineer-In-Charge

S&F Unplasticised PVC pipes Sch 40 of fixed complete to walls, ceilings or in floors etc., any type of pipe for 20 mm bore sizes with fittings make: ISI Marked best quality etc complete all as specified and directed by Engineer-In-Charge.

His And Her Enterprises

Khan Brothers

Ajanta Motor Store

M/S AVADH ENTERPRISES