BALANCE CIVIL WORKS FOR WPT and LETS PAC

Amount

Balance Civil Works for WPT&LETS St-I

1(a)Excavation - lift upto 5m

1(c)Extra over 1(a) for compacting

2(a)Excavation - lift upto 5m

2(c)Backfilling with soil

3(a)Excavation-lift beyond 5m

5(c)Medium grained sand filling

6(a)(i)Graded stone (63-45 mm) with sand

6(b)(i)40mm Nominal size stone

7(b)PCC-M 10

7(d)PCC M-20

8(a)(ii)RCC-M 25 - BGL

8(b)(ii)RCC-M 25 - AGL

9 Cement concrete admixture

10(a)Bituminous Coating

10(b)Tar extended two component coating

11(a)(ii)Reinforcement - BGL

11(b)(ii)Reinforcement - AGL

12(a)Form Work- BGL

12(b)Form Work- AGL

14 Erection of embedded parts

15(a)MS pipes of all dia

15(b)PVC conduits of all sizes

18(a)Cement: sand grout

18(b)Cement aggregate grout (stiff mix)

19(a)(i)Bitumen imp. fiber board 12mm th

19(a)(ii)Bitumen imp fiber board 25mm th

20(a)PVC Water Stop

20(c)Cement slurry mod with acr pol

22 Dismantling concrete work

23(a)Chipping of RCC & PCC

24 Precast concrete

25 MS foundation bolt

26(a)Fabr., erection, align.- Mild Steel

28(a)Extra over 26 for blast cleaning

28(b)Applying intermediate coat

28(c)Applying finish coat

29(a)Electro forged gratings

29(b)Extra over 29(a)

30(a)Permanent mild steel bolts

32 Dismantling of erected str. steel

33(a)Add. to Erection marks- in erected

33(b)Add. to Erection marks- in fabr.

34 Re-erection of dismantled fabr. str

36(a)(i)B/w with fly ash bricks CM1:6

36(a)(ii)B/w with fly ash bricks CM1:4

36(b)(i)B/w with clay bricks CM1:6

36(b)(ii)B/w with clay bricks CM1:4

37 Dismantling brick masonry

38(a)Plaster - 18mm th. CM 1:6

38(b)Plaster - 12 mm th.CM 1:6

38(d)Plaster - 6 mm th.CM 1:4

41(a)POP with Distemper

41(b)Distemper

41(c)Acrylic emulsion paint

41(d)Chemical resitant paint

43(a)Textured coating finish- 1.2 mm

43(b)Textured coating finish- 2.5 mm

51(b)Metallic hardener topping

52 Acid, alkali and oil resistant

56(a)Door double sheet plain shutter

58 Anodised Aluminium Section

60(a)(ii)Rolling shutter

62(a)4mm th. Float glass

63(a)Water proofing treatment

64(a)Glass reinf gypsum false ceiling sy

66(a)Fencing PVC Coated Chain L

67 Structural steel work in gates

68(a)(i)GI pipe-20mm to 40mm

68(a)(ii)GI Pipe- 100mm to 150mm

69 Brass stop cocks-20mm to 40mm

70(a)Toilet block

71 Pantry

72(a)Sand cast iron waste pipe- 100mm

72(b)Sand cast iron waste pipe- 150mm

73(a)Cast iron pressure soil pipe- 100mm

73(b)Cast iron pressure soil pipe- 150mm

74(a)Non-pressure RCC pipes- 200mm, NP3

74(b)Non-pressure RCC pipes- 300mm, NP3

74(c)Non-pressure RCC pipes- 400mm, NP3

74(d)Non-pressure RCC pipes- 600mm, NP3

75(a)RCC MH:i/s .90mx.80m,d .60m to .90m

75(b)RCC MH: 1200mm dia,d .90m to 2.3m

78 Earthing Mat

NS Brick masonry lining in drain

NS(a) Gate- 2.87m x 1.80m

NS(b) Gate- 1.8m x 1.10m

NS(c) Gate- 1.2m x 1.00m

NS(d) Gate- 0.6m x 0.6m

NS(e) Gate- 0.5m x 0.3m