PROVN OF TOILET BLOCK AT DOLLYGUNJ (RESITING OF MO PBR) AND OTHER SANCTIONED WORKS UNDER GE MINNIEBAY, PORT BLAIR

Amount

Surfaces excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation over areas not exceeding 1.50 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Excavation over areas exceeding 1.50 m but n. exc 3m in depth and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc, and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches n.exc. 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out in hard/ dense soil and complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed..

Removing excavated surplus soils n.exc 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

Back filling of retaining walls using approved earth obtained from excavation complete all as specified and as directed.

M&L for PCC type D2 1:4:8 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed.

M&L for 75mm thick PCC type C2,1:3:6 using 40 mm graded stone aggregate in plinth protection/sub base of floor etc complete all as specified and as directed.

M & L for PCC 1:3:6 type C-2, using 40mm graded stone aggregate as in foundation, fillings, mass concrete, footings etc complete complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of pole etc including form work complete all as specified and directed.

M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for reinforced cement concrete (nominal mix) type B-1, 1:2:4 using 20 mm graded aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete (nominal mix) type B-1, 1:2:4 using 20 mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for reinforced cement concrete (nominal mix) type B-1, 1:2:4 using 20 mm graded stone aggregate in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for reinforced cement concrete (nominal mix) type B-1, 1:2:4 using 20 mm graded aggregate in slabs supported on walls, beams and columns in floors, roof landings, balconies, shelves,chajjas and the like complete all as specified and as directed.

M&L TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M&L TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M&L for form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, side and soffit s (if any) of foundation and plinth beams and simillar work, vertical or to batter rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete Square, rectangular or polygonal complete all as specified and as directed..

M&L for formwork to sides of pillars, posts, struts,piers,columns and stanchions rough finished surfaces of concrete circular on plan complete all as specified and as directed..

M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) rough finished surfaces of concrete complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry with solid blocks,Type C1,1:3:6 using 20mm graded stone aggregate exc 10 cm in width and setting in CM 1:6 complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry with solid blocks,Type C1,1:3:6 using 20mm graded stone aggregate n.exc 10 cm in width and setting in CM 1:4 complete all as specified and as directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick (square/ rectagular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm screed in cement mortor 1:6 complete all as specified and as directed

M&L for glazed ceramic,coloured tiles in vertical surface 450x 350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendring in Cm 1:4 wall complete all as specified and as directed

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet, used instead of Plain colour PVC sheet & edges will be printed to match with printed sheet, reinforced with MS square tube & fixing in opening complete all as specified and as directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed (Rudhraksh) PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900)and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F butt hinges 100 mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised type C-21 complete all as specified and as directed

S&F Aluminium anodised barrel tower bolts of extruded sections 150 mm size complete all as specified and as directed.

S & F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed..

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 5mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately

Supply only Integral water proofing compound ISI marked

M&L for rendering 5 mm thick on concrete surfaces ( roof ceiling and soffit of chajjas), in CM (1:3) finished even & smooth without using extra cement complete all as specified and as directed..

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting on plastered surfaces, preparatory to distempering complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of cement based paint over a coat of chalk whiting on plastered surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of chalk whiting on plastered surfaces complete all as specified and as directed.

S&F Mild Steel Rolled sections as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

S & F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified

S & F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified

S&F Aluminium flat , wind ties of any size fixed with self tapping screws of size 40/50mm with integral EPDM washer screwed in roof covering, including all necessary drilling, bolting or riveting etc., and similar work complete all as specified and as directed.

M&L 15mm thick rendering on terrace, sides of parapet in cement mortar 1:4 with water proofing compound , finished even and fair complete all as specified and as directed.. Note : WPC shall be measured and paid separately under relevent item of this schedule as supply only

M&L for cleaning the new plastered surfaces with wire brushes, brooms etc and applying a priming coat of bitumen primer @ 0.30 ltrs/Sqm consisting of 3/4 part bitumen of grade 85/25 and 1/4 part of kerosene oil complete all as specified and as directed..

M&L for providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/Sqm ) land on after applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2Kg per Sqm by forced application complete all as specified.

M&L for applying a coat of industrial bitumen 85/25 at the rate of 1.2Kg per sqm with forced application above APP based polymeric membrance complete all as specified and as directed.

M&L dual coat of aluminium paint over the top surface of APP on roof complete all as specified and as directed.

S&F anodised aluminium snap grade of size 605 X 605mm frame work for fall ceiling all as specified

S&F hangers 6mm dia G I (upto 1200mm length) asjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed..

S& F 4mm thick E-board , multipurpiose, decorative type,for ceiling purpose complete all as specified and as directed.

S&F 25mm dia aluminum powder coated best quality curtain rails with fixing brackets in both ends complete all as specified and as directed.

S&F decorative globes for curtain rails to be fixed at both end complete all as specified and as directed.

S&F Waste pipe any dia (32/40mm) complete all as specified and as directed.

S & F CP Health Faucet high quality with 8mm dia, 1.2 Meter long flexible tube & wall hook complete all as specified and as directed.

S & F two in one Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed.

S&F vitreous china urinal, half stall type white with grating union and discharge pipe including brackets including push botton connection for flushing complete all as specified and directed.

M&L for granite 20mm thick slab machine cut, chamferred on edges, set and jointed in wall including cutting and making groove for slab/stone in brickwork or concrete (as in partition) and set CM 1:3, pointed with white or colour cement to the shade of slab.

S&F 75 mm Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate complete all as specified and as directed.

S&F 100 mm CI floor trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate complete all as specified and as directed..

S&F 125X100 mm salt glazed stoneware gully traps,sqare or round mouthed,type P complete all as specified and as directed. .

S&F 75 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed

S&F 100mm bore cast iron bend ( any radius) complete all as specified and as directed.

S&F 75mm bore cast iron bend ( any radius) complete all as specified and as directed.

S&F 100 mm bore cast iron sanitary connection socket to fit wc outlet complete all as specified and as directed.

S&F vitreous chinaware wash down water closet pan (Pedestal pattern) single piece WC with PP seat cover, hinges fixing accessories set, cistern fittings at overall size 640x360x390 etc complete all as specified and directed.

S&F vitreous china wash hand basin, white flat back size 550x400 mm including brackets ,32mm dia waste coupling, brass chromium plated, 32mm dia PVC waste pipe etc with long screwed shanks and fly nuts, all as specified & directed

S&F 15mm bore pillar tap, cast copper alloy, with capstain head, chromium plated,screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, fancy type, screwed for iron pipe, all as specified and as directed

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed..

S&F Bib taps 15 mm bore cast copper alloy chromium plated with crutch or butterfly handles,fancy type, screwed down, screwed for iron pipes complete all as specified.

S&F Stop Valves, 15 mm dia, cast copper alloy with capstan head, Chromium Plated, Fancy Type, screwed down high pressure with crutch or butterfly handle with long shank and cup [concealed type] for iron pipe etc complete all as specified.

S&F brass chromium plated shower rose with 150mm long CP shower arm 125 mm size revolving type suitable for 15 mm bore pipes complete all as specified and as directed.

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

S&F Brass elbow suitable for 20mm outer dia CPVC pipes complete all as specified and as directed.

S&F Brass Tee suitable for 20mm outer dia CPVC pipes complete all as specified and as directed.

S&F tank adaptor suitable for 25mm outer dia CPVC pipes complete all as specified and as directed.

S&F union suitable for 25mm outer dia CPVC pipes complete all as specified and as directed.

S&F ball valve suitable for 25mm outer dia CPVC pipes complete all as specified and as directed.

S&F Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F for Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

Supply only 5.5mm thick sheet glass ordinary quality, in squares n. exc 0.5sqm each pane complete all as specified and as directed.

M & L for RCC M-30 Design Mix, using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

M & L for RCC M-30 Design Mix, using 20mm graded stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like, any thickness above top of footings including attached pilasters and buttresses etc complete.

M&L for form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc. vertical or to batter for rough finished surfaces of concrete complete all as specified and as directed.

M&L for form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc. vertical or batter for fair finished surfaces of concrete complete all as specified and as directed.

M&L for Boulder filling as in weep holes complete all as specified and as directed.

M&L for PVC pipe 75 mm dia as in weep holes complete all as specified and as directed.

M&L for RCC 1:2:4 type B-1 using 20mm graded stone agg as in cover slab and like axcept set in cement mortor 1:4 complete incl necessary form work complete all as specified and as directed

M&L for 150mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches floor or wall and similar works complete all as specified and as directed.

S&F Single CP Towel Rail fancy type high quality 600mm long complete all as specified and as directed..

S&F CP Toilet roll (paper) holder fancy type high quality complete all as specified and as directed..

S&F Corner glass shelf of high quality 5mm thick glass & CP railing with bracket complete all as specified and as directed..

S&F CP Towel ring square with round flange high quality and fancy type complete all as specified and as directed.

S&F Glass shelf assembly consisting of 5.5mm thick sheet glass, 12cm width with chromium plated guard and railing 550mm long complete all as specified and as directed.

Supply and laying in trenches or passing through pipe, XLPE insulated and screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) LT UG cable with stranded aluminium conductor for 1100 volts grade of following cross sectional area:-

16 Sqmm Cable 2.0 core

50 Sqmm Cable 3.5 core

10 Sqmm Cable 2.0 core

Supply, laying DWC (double Wall corrugated) HDPE pipe ISI marked of outer dia of 77 mm and inner dia 63 mm polethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cable complete all as secified.

Supply, laying DWC (double Wall corrugated) HDPE pipe ISI marked of outer dia of 50 mm and inner dia 38 mm polethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cable complete all as secified

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level, connected to galvanized earth strip of 25x4mm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected from earth plate electrode to main switch board/ earthing test point including watering arrangement with 20 mm GI pipe medium grade,40 mm GI pipe light grade for earth strip protection, PCC 1:3:6 type C1 chamber, MS funnel, wire gauge, 50mm thick precast RCC cover in Type B1, including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to a distance n.exc 50m, charcoal and salt complete all as shown in electrical plate No. 3 of Schedule Part-I 2009 and connected to earthing test point all as specified or indicated and testing on completion

M & L for PVC insulated 3 core 4 Sqmm multistandard aluminium conductor for connection of security light from DB to security light / OH conductor to security light complete all as specified and as directed.

S&F LED security lights fitting 90 Watt ,New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source complete all as specified as directed.

S & F Street light brcket 40mm dia mediem grade 1.5 Mtr with clamps of size 25x5mm thick (03 Set) with nuts,bolts & washers etc. complete properly bended all as specified and directed.

Supply ,Installing and testing of cable junction box fixed with pole of size 300 x 200 x 105mm with bus bar of four Nos maid of 3.15 CRCA Sheet with locking arrangement complete all as specified and as directed.

M&L for cutting iron pipes/GI pipes of any dia and insertion of "T" and branches including necessary earth work and welding complete all as specified and as directed

Supply, laying, of GI pipe medium grade fixed at of size 20mm dia including fitting and fixture complete all as specified and as directed.

Supply, laying, of GI pipe medium grade fixed at of size 25mm dia including fitting and fixture complete all as specified and as directed.

Supply, laying, of GI pipe medium grade fixed at of size 50mm dia including fitting and fixture complete all as specified and as directed.

Supply & errect Steel tubular swaged poles complete in true vertical position, with CI base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP - 31 (9.0 Mtrs long) with Street light brcket 40mm dia mediem grade 1.5 Mtr including clamps, nuts,bolts and washers with Polycaronete cable junction box of size 300X200X120mm with aluminium lugs one incoming and out going with terminal set independenly complete all as specified and as directed.

M & L point wiring with 1.5 Sq.mm (nominal area) PVC unsheathed multi strandard copper conductor PVC insulated 1100 volt FRLS grade single core cable drawn through concealed/surface and including rigid pvc conduit/Caing and cabing medium grade ISI marked minimum 25mm size and its accessories complete along with 1.5 Sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed ,seiling/roofs with and including 1.2 mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches,switch socket combinations fan regulators etc., as required with 3 mm thick plastic laminated sheet top cover all as directed and specified for the following:-

One light /fan point controlled by one switch complete all as specified and as directed.

One five pin switch socket 5 Amps plug point on same board

One five pin switch socket 5 Amps plug point on Independent board

S&F switch piano flush type one way 5 Amps SP 230 Volts complete all as specified and as directed..

S&F ceiling rose surface type with three terminals complete all as specified and as directed..

S&F decorative ultra slim universal Batten for LED Tube light fitting 22W all as specified and directed.

S&F switch socket outlet 3 & 2 Pin, 5 Amps, 240 V flush type multipurpose controlled by one switch

S&F sheet metal enclosure powder coated MCB DB SPN 8 way complete all as specified and as directed Note : DB shall be fixed in wall such that fron door shall be flush with the wall surface

S&F MCB SPN 0-40 Amps, 230V, 50Hz AC supply complete all as specified and as directed

S&F MCB SP 0-40 Amps, 230V, 50Hz AC supply complete all as specified and as directed

All as per item No 116.00 abovebut with 2.5 Sqmm single core multi standard unsheathed copper conductor for one three pin socket 15 Amps on independant board including continuous earth wire PVC insulated 1.5 Sqmm copper solid conductor to common earth dolly and complete all as specified and as directed.

Supply, installation, testing and commissioning LT Panel / Feeder pIller Box of size 1000X750X 500 mm suitable for 3 phase 415 Volts of of CPRI Approved out door type made out of 3.15mm thick CRCA sheet with angle iron frame of size 40x40x6mm cubical type complete with Copper bus bar 200 Amp to accomodated to the following. INCOMING (a) MCCB 4 pole 63 Amp 25 KA - 01 No. OUTGOING (a) MCCB 4 pole 32 Amp 10 KA - 03 No. (b) Digital Timer Switch 20 Amp- 02 N0 (c) ON - OFF indicating lamp withToggle switch

Supply, install, test and comissioning of RO plant of 1000 LPH capacity with raw water pump, 100 micron TSS filter obsorbtion filter, reverse osmosis system, 01 micron filter, 0.5 micron filter, ultra violet water disinfections system, stainless steel piping low pressure cut off switch, membrane high pressure skid mounted RO PH correction system, anti scaling dosing system, flow meter high pressure pump along with wet panel and system electrical control panel and copper cable of suitable size from control panel to pump sets and stainless steel tank of 1000 Ltrs capacity, including necessary covered shed with PVC door for the plant complete all as specified and as directed.

S & F 5000 Ltrs capacity PVC rotational moulded polythylene water storage tanks ISI marked double layer cylindrical vertical with closed top hoised and fixed in position on PCC plat form of suitable size, float valve, inlet/ outlet/ overflow connection complete all as specified and directed Note : Cost of PCC plat form/ staging for water tanks shall be deemed to included in this qouted rate

S & F 1000 Ltrs capacity PVC rotational moulded polythylene water storage tanks ISI marked double layer cylindrical vertical with closed top hoised and fixed in position complete all as specified and as directed

Supply & laying of steel water tubing, galvanised medium grade screwed socketed joints incl. all necessary fittings such as sockets, socket reducer, bends, elbows, Tees, Tee reducers, unions etc. of size 40 mm dia on walls/ laid in trenches / floors and making good the distributed surfaces of walls/ floors etc complete all as specified and directed

All as per item No 132.00 abovebut of size 25 mm dia and complete all as specified and as directed.

S & F Gun metal gate valve of size 50 mm dia complete all as specified and as directed.

All as item No 134.00 above but of size 25 mm dia and complete all as specified and as directed.

S & F GI tube 80 mm medium grade for cable protection all as specified and as directed

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed

M&L for 10mm thick cement plastering in cement mortar 1:6 on brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed

S&F LED tube light fitting, 1x20 w, 230v .Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed.

S&F Exhaust fan 300 mm sweep along with complete accessories such as louvers, clamps, etc incl connecting from ceiling rose to fan connector with three core cable of suitable size and complete all as specified and as directed.