SRMO ground floor of service building at Ind. Area at Shoghi Distt. Shimla (HP) (SH- P/L vitrified tiles and renovation of toilets, changing doors and windows and painting work.

Amount

Dismantling , doors, windows and clerestory windows, ventilators etc (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachement etc. Complete and stacking them within all leads. (a) Not Exceeding 3 Sqm. In area

Dismantling of tiled floors laid in the mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable material within 20 mertres lead .

Dismantling of tiles in walls laid in cement mortar upto floor two level i/c stacking of serviceable material and disposal of un-serviceable material within all leads and lifts

Demolition above Ground level upto all floors level including disposal of unserviceable material within all lead and including cutting the necessary reinforcement and sperating out from RCC/RB works.

Brick work using common clay burnt building bricks in superstructure avobe ground level in cement mortar 1:6 (1cement: 6 sand) 1st class bricks upto all height.

Half brick masonry in comman burnt clay building bricks in superstructure avobe plinth level upto floor two level with cement mortar 1:4(1cement:4 sand) 1st class bricks

Providing from work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shuttering strutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor two ceiling and removal of the same for instu- reinforced concrete and plain concrete work in:-(a) Flat surfaces such as soffits of suspended floors, roofs, landing of the like floors etc. upto 200mm in thickness.

Providing & laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in all height. (a) Suspending floors roofs landing & shelves and their supports, balconies, beams, girders, bressumers and their cases (except spiral cantilever upto floor two level.

Providing tor steel reinforcement for RCC work including bending, binding and placing in postion complete upto floor two level.

Providing wood work in frames of doors, windows, clerestory and other frames, wrought, framed and fixed in position. 2nd class Deodar wood.

Providing & fixing panelled glazed or panelled and glazed shutters for doors windows and clearstory windows including black enamelled iron butt hinges with necessary screws. 40mm thick 2nd Class Deodar Wood.

Providing & fixing machine made flush door shutters for doors including black enamelled iron butt hinges with necessary screws. 40mm thick

P/F wire gauge shutters using galvanised M.S. Wire gauge of I.S. Gauge designation 85 G with wire of dia.0.56mm for doors,windows & clerestorey windows i/c bright finished black enamelled iron hinges with necessary screws.30mm thick 2nd class deodar wood.

Providing and fixing bright finished brass sliding door bolt with bolts and nuts screws etc. complete. (a) 300mm x 16mm.

Providing and fixing bright finished brass tower bolts (barrel type ) with bolts and nuts screws etc. complete.(a)200x10mm.

Providing and fixing bright finished brass Hnadles with bolts and nuts screws etc. complete.(a)125mm.

Providing and fixing oxidized M.S. hooks and eyes (a) 150mm

Providing and fixing hydraulic door closer of GP heavy duty

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).

15mm cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).

Providing and laying cement concrete 1:3:6 (1cement:3sand:16graded stone agregate 20mm nominal size ) and curring complete excluding cost of form work in foundation and plinth.

P/F 8mm thick digital wall tiles of size 300x450mm of Kajaria/ Nitco/ Somany make manufactured of approved shade & clour laid over 12mm thick cement mortar 1:3 (1cement : 3sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete

Providing and laying spartic ceremic tiles 5.5mm thick in flooring 300x300mm size on treads of steps laid on a bed of 12mm thick cement mortar 1:3(1cement:3sand) finished with flush pointing in white cement.

Providing & laying vetrified tiles (600x600mm x 10mm) in grey coloured or of approved shade in flooring treads steps and landing laid on a bed of 12mm thick cement mortar 1:3(cement :3sand) laid over and jointed with neat cement slurry.Kajaria/ Orient Make.

P/L Granite Stone in flooring 20mm thick base in Cement Mortar 1:3 (1 Cement : 3 Sand) i/c jointing with grey cement slurry mixed with pigment to match the shade of pigment to match the shade of granite stone i/c rubbing and polishing complete 20mm thick.

Applying priming coat over new wood and wood based surface after and including prepairing the surface by thoroughly cleaning oil, dirt and other foreign matters sand papered knotting. Ready mixed pain brushing wood primer pink.

Painting two coat (excluding priming coat) on new wood and wood based surfaces with readymixd paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter sand pepering and stopping with ready mixed paint. (a) White paint.

Applying priming coat over new steel and other matel surfaces after and including prepairing the surface by thoroughly cleaning oil grease, dirt and other foreign matters sand papered knotting Ready mixed pain brushing red oxide/zink oxide chrome.

Painting two coat (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint other than white.

Applying birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly Surface free from mortar dropping brushing the and other foreign matter and sand papered smooth including applying of putty a required for metling the surface

Finishing wall with Apex of Asian brand and manufacture and of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.

Providing and fixing PVC pipe spigot and socket soils waste and ventilating pipes lead caulked joints to be measured and paid for separately of Phinolex/ D-plast. (a)110mm

P/f P.V.C. Fittings and accessories of Phinolex/ D-plast.(a) P/f PVC plain bend ISI marked including fixing with approved adhesives etc. Complete (a) 110mm dia

(b) P/f PVC plain bend ISI marked including fixing with approved adhesives etc. Complete 75mm dia

(c)P/f PVC Sinlge equal branch of required dergree ISI marked including fixing with approved adhesives etc. complete 110mm

d)P/f PVC Sinlge equal branch of required dergree ISI marked including fixing with approved adhesives etc. complete 75mm

Providing and fixing PVC clamps ISI marked of approved design with steel screws and raw plugs etc. complete. (a)110mm

Providing and fixing to wall ceiling and floor G.I. pipe (Medium Grade) 15mm dia. With fittings and clamps i/c making good the wall, ceiling and floor

Making connection of galvanized mild steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and treading the pipe complete.

Providing & fixing pvc floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete i/c cost of cutting & making good the walls and floors. 110mm nominal dia.

P/F vitreous china wash down water closet (European type, W.C. Pan) with integral 'P'or 'S'trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement:1 Sand) Ordinary complete.

Providing and fixing PTMT Coloured / white high density polythelene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float,with push button,couplings for connections with inlet, outlet and ovrflow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately .

P/f plastic seat and cover for wash down water closet with CP brass hinges and rubber:- solid type coloured plastic seat cover

Providing and fixing water jet for water closet complete with all fittings such as Connection pipe.

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C. P. waste with CI or MS Brackets painted white including cutting holes and making good the same but excluding fitting. 610x460 mm with bowl depth 200mm.

Providing & fixing vitreous china wash basin with pair of hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings flat back 630 x450mm of reputed make. (Hindware/ Parryware make).

Providing & fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings.

Providing & fixng CP Brass waste for wash basin or sink 32mm dia.

Providing & fixng PVC waste pipe for wash basin or sink 32mm dia.

Providing & fixing 100mm sand cast iron grating for gully, floor or Nahni trap.

Providing & fixing 600 x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheets or plywood sheet and fixed to wooden plugs with CP brass screws and washers.

Providing and fixing C.P. brass towel rail complete with C.P. brass bracket fixed to wooden plugs with C.P. brass screws. 600mm x 20mm.

Providing & fixing CP brass Pillar tap with capastan head 15mm dia.

Providing & fixing CP brass bib tap with capastan head 15mm dia.

P/F C.P. brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws.

P/F C.P. brass angle valve 15mm without Nuts and pipe.

P/F brass stop cocks:(a) 15mm dia

(b) 20mm dia

Providing & fixing PVC connection pipes with brass unions 45cm lenght 15mm nominal bore.

Providing and fixing G.I. or M.I. unions. 15mm dia.

Providing and fixing PVC water storage tank G.I. Inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement i/c hoisting upto all heights above ground level: 1000 ltrs. net Capacity tank.

Durgesh Singh

Manish Mohan Sharma

AMIT SHARMA