T.Kallupatti 15th finance 2025-2026 tied 2nd instalment

Amount

construction

Earthwork excavation for foundation in all soils and sub soils in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders and to full depth as may be directed,except in hard rock,requiring blasting including shoring and shuttering and bailing out of water wherever necessary,refilling the sides of foundation with excavated earth or sand in layer of not more than 15cm thick.well rammed and consolidated and depositing on bank with initial lead and lift of 10m & initial lift of 2m and depositing the surplusr earth within the compound in places shown by the departmental officers with iniital lead and lifts,clearing and levelling the site etc., complete as per SS20B and as directed by departmental Engineers(TNBP No.20B).

Plain Cement Concrete 1:4:8 mix (One Cement, Four Fine Aggregate and Eight Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNBP No.28).

Supplying and erecting centering for sides and soffits including supports and strutting uptp 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90cmx60cm and 10 gauge stiffened, welded with mild steel angles of size 25mmx25x3mm for boarding laid over silver oak (country wood) joist of size 10cmx6.5cm dia spaced about 90cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre tocentre etc.complete complying with standard specification and as directed by the departmental engineers. TNBP No.30

Square Column

Centring

Reinforcement Cement concrete 1:1 1/2:3 (One cement, one and half sand and Three aggregate) using machine crushed 20mm gauge hard broken stone jelly for all RCC items of work excluding centering strutting, and reinforcement grills placed in position but including mixing concrete, laying and vibrations charges, curing, etc complete and including providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary etc. complete complying with standard specification( TNBP No:30)

Supplying, fabricating and placing in position mild steel or ribbed tor steel for all reinforced cement concrete works as per design given including cost of steel and binding wire with all conveyance and lead charges in all floors etc.complete complying with standard specifications and as directed by the deparmental engineers. TNBP No:30

Brick Work in CM 1:5 (One part of cement & five parts of sand) mix using II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing the concrete etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:31

Special Ceiling Plastering with CM 1:3 (One part of cement & three parts of sand)mix for 10mm thick including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:30,56&57

Plastering with CM 1:5 (One part of cement & five parts of sand) mix for 12mm thick including cost and conveyance of all materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:56&57

Supplying, fabricating and fixing in position of mild steel door with Double shutters using M.S angle of size 40 x 40 x 6mm for outer frames and 35 x 35 x 5mm for shutter frames, fully covered with M.S sheet of 18 gauge with M.S flat of size 32 x 6 mm for internal stiffners and one number of aldrop , two numbers of tower bolts, holdfasts, hinges, handles etc., including providing one coat of red oxide primer. The rates shall inclusive of cost of all materials labour charges for fixing the door in position by dismantling the masonry, concrete etc. and redoing the same to the original condition duly packed with concrete etc., complete.

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Painting with two coats of Approved colour of best quality synthetic enamel paint, painting over new iron work including cost and conveyance of all materials and all labour charges etc. complete as per Standard specification and as directed by the departmental officers. (New Iron Surface).TNBP No:66&66-A

Provision for Geocysical Survey with Scientific Instruments including transportation charges

Drilling of borewell anywhere in Tamilnadu including transportation from one place to another place withinTamilnadu in alluvial soil or sedimentary strata of clay and sand or sand, stone, shale, pebbles, boulders etc., by first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia by direct or reverse rotatry mud and circulation method using Contractor's rig, fuel, labour, drilling, betonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit only Calyx drills are to be used.etc., complete. as per standard specification

Supply and Delivery of 150 mm dia PVC Casing Pipe of approved quality to require depth including cost and conveyance of all materials and labour charges and other incidental charges to site etc., complete. as per standard specification

Supply and delivery and fixing of 2000 Liter Capacity HDPE Water tank as per ISI 12701/1996 including loading,unloading, transportation and labourcharges for fixing charges etc.Complete

Supply and delivery of 1.50HP Single phase Submerssible Pumpset as per Is 8034 with out Panal Board including all labour charges etc,But Excluding Excise Duty&VAT (20 Lpm x 150mHead) etc.Complete

Supply and delivery of 1.50HP Single phase Panal Board With two level gurd and Auto Start including all labour charges etc But Excluding Excise Duty&VAT ,etc.Complete

Supply and delivery of Following PVC pipes and Specials from Borewell to HDPE tank laying below ground level and above Ground level and HDPE tank to Toilet .

4 sq.mm PVC insulted copper flat cable

32 mm Dia B-Class G.I.Pipes(Medium) for submersible motors in borewell

32 mm dia G.I.Coupling

32 mm dia G.I.Bend

32 mm dia G.I.Union

32 mm dia G.M Gate valve & Non Return Valves

150 mm dia Bore Clamp set of 65mm Width

20 mm Dia B-Class G.I.Pipes

20 mm dia G.I.Coupling

20 mm dia G.I.Elbow

20 mm dia Waste Not Tap

16 Amps DPIC Main

Labour charges for the erection of submersible pumpset(Up To 5Hp) in Borewell including fixing jointing submersible cable with proper clamps up to starter to required depth ande also fixing of riser pipes to the recquired depth valves erection clamps,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter,Ammeter,Three pilot (indicating) lamps capacitor single phasing preventor,Water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days etc.Complete

Supply and delivery of the following pipe and specials for the erection of pump sets with ISI specification as directed by thedepartmental officers including cost and conveyence of the same etc complete as per standard specification.

65mm Dia Gi pipe

U M VIKAS (BID ID -1475394)