Renovation Work of Divisional Leboratory Hall, Dahilamau in District-Pratapgarh (Year 2026-27)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR 15.56 (Vol-ii)

Earth work in Excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 meter in width as well as 10 sqm on plan) including getting out and deisposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kind of Soil. DSR 2.6.1

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 comorming to IS: 2222 in super structure above plinth level up to floor five : level in cement mortar 1:6 (1 cement : 6 coarse sand) with F.P.S. (non modular) bricks (DSR 6.3.1)

12 mm thick cement plaster on fair side of single or half brick wall of mix with 1 cement : 4 fine sand of 1:25 fineness modulus mortar including supply of all materials, labour, and T&P etcf. required for proper completion of the work. 1:4 (1cement : 4 Fine Sand) mortor DSR 13.1.1 (Vol-ii)

Reinforced cement concrete work in beams, suplended floors, foofs having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiraal stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cemnt :1.5 Coarse sand (zone-III) derived from natural source : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.3

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. TMT bar of grade fe 500D DSR 5.22A.6

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mited and welded by angle iron 35x35x5 mm or 35x5 mm flat pieces to the exisitin T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the drection of Engineer-in-charger DSR 10.31

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete DSR 13.80 (Vol-ii)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 13.48.1 (Vol-ii)

Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 Ltr /10 sqm 13.47.1