Repair to joinery flooring block masonry plastering sanitary fitting and roof treatment sheeting to permanent bldg at AF Station carnicbar

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and as directed.

Taking down and refixing same opening shutter exc.1 sqm and not exc 2 sqm each al as directed.

Taking down and refixing same opening shutter n.exc.1 sqm each all as directed.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and as directed.

S&F second class hard wood plain, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

M&L for treating the ends of posts, back of chowkats etc area exc 0.10 sqm but not exc 0.50 sqm each tarred with tar, or coal tar black paint complete all as specified and as directed.

M&L for treating small articles such as stop, covers, gully grating, hold fast, ends of posts, back of chowkats etc area not exc 0.10 sqm each tarred with tar, or coal tar black paint complete all as specified and as directed.

M&L for providing cement concrete type C1 (1:3:6) using 20mm graded stone aggregate as in bed blocks of holdfast, complete all as specified and as directed.

S&F aluminium frames for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed.

S&F anodised aluminium door shutter, aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, handle 2 Nos in doors, hinges, anodised aluminium snap beading etc complete all as specified and as directed.

S&F anodised aluminium window and ventilator shutter, side hung type type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, anodised aluminium snap beading, scews anodised aluminium fittings such as peg stay 150mm long (01 No), hinges type B-21 100mm long (02 No) suitable handle (01 No) complete all as specified and as directed.

S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels complete all as specified and as directed.

S&F 35mm thick second class hard wood plain framed panelled shutters (any no of panels), with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veeners complete all as specified and as directed.

S&F 35mm thick second class hard wood, glazed and skeleton shutters , open redated and prepared to receive glass, gauze etc (with shash bar), edges of framing plain, champered or rounded fitted with cut and mitred beads for securing glas etc size of member of shutters as specified in SSR Part - I complete all as specified and as directed.

All as per item No.15 but window/ventilator complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing complete all as specified and as directed.

S&F solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with a solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either sides and as gap inserts for top and bottom rail panneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement as per specification and drawing complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter,with wood free EPS 28 to 30mm thick (stiles), with 2,3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face &2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and as directed.

M&L butt hinges 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and as directed.

S&F butt hinges 75 mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and as directed.

M&L extruded aluminium alloy handles 150mm, fabricatede type anodised complete all as specified and as directed.

S&F extruded aluminium alloy handle 100 mm size fabricated type, anodised complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt of length 300mm with hasp, staple (bolt type) and fixing clip of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt of length 200mm of extruded section complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt of length 150mm of extruded section complete all as specified and as directed.

S&F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of operature 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

S&F in repairs aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of operature 1.40mm and fixed with aluminium wire staples all as directed

S&F aluminium anodised "Deco" grill, DG 102, 100 x 10 mm x 7 mm thick, approved design for windows/ventilators with and including F/U channel complete all as specified and directed

M&L for preparation of new or previously untreated wood surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and as directed

S&F aluminium (Die cast body) Door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters 701 to 850mm in width and of weight between 36 ro 60 Kg complete all as specified and as directed

S&F and in repair aluminium (Die cast body) Door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters 701 to 850mm in width and of weight between 36 ro 60 Kg complete all as specified and as directed

S&F 100mm size stainless steel in built mortice lock 4 leavers for aluminium shutter complete all as specified and as directed

S&F 75mm size aluminium in built mortice lock 4 leavers for aluminium shutter complete all as specified and as directed

S&F in repair stainless steel 250mm long friction hinges fixed to aluminium window complete all as specified and as directed.

S&F 300mm in size of Mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed to door complete all as specified and directed.

M&L for prelaminated particle board 12mm thick interior grade, prlaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws in aluminium works complete all as specified and as directed

S&F frosted glass 5.5mm thick ordinary quality and glazing with oil and putty in square not exc 0.5 sqm in each pane Extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one sidecomplete all as specified and as directed.

Hacking out glass old broken (any thickness, quality or description) from wooden frames, stone brick, concrete. Surrounding glazed with oil putty or fixed with beads complete all as specified.

S&F glass 5.5mm thick ordinary quality and glazing with oil and putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.

S&F for sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not ecx 0.5 sqm each complete all as specified and as directed

S&F for solar control flim 50 micron reflective type sticked to glass panes as per instructions of manufacturer's complete all as specified and as directed

S&F IInd class hardwood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.. and removing old beads to store complete all as specified and as directed.

S&F 2nd class hardwood weather boarding clean sawn, thickness 20 to 25mm and rebated on thick edge to give 20mm lap as in eaves board complete all as specified and as directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium allloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

Decorative/Fancy type certain rods brackets of Aluminium/brass alloy suitable for 20mm dia aluminium alloys decorative certain rod/pipe.(As per sample kept in GE's Office) complete all as specified and as directed.

Decorative/Fancy type curtain rods of Aluminium/brass alloy suitable of 19mm dia. (As per sample kept in GE's Office) complete all as specified and as directed.

Dismantling timber fillets,rails,posts,rafters , purlins,etc.under 40 Sqcm in section complete all as specified and as directed.

S&F second class hardwood plain fillets square, rectangular, or triangular in section, (sectional area exc 13 sqcm but not exc 25 sqcm) clean sawn, secured with nails or brads complete all as specified and as directed.

Dismantling walls and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and as directed.

S&F anodised aluminium snap grid frame (with minimum 15 micron uniform anodized coating) size of 605mm x 605mm consisting of Tee/Angle section, size 40 x 40 x 2mm as approved make confirming to IS-733 in frame of false ceiling including aluminium cleat with necessary CP brass/stainless steel shunk screws. Aluminium perimeter angles fixed to wall/wooden frame at centre to centre and fixing frames to level adjusting anchors 8mm dia GI wire with hook in Tee members at 1.5m centre to centre fixed to steel trussed roof complete all as specified and as directed.

S&F for 4mm thick Non Asbestos boards ordinary type and fixed to timber/ aluminium frame work with screw/nail complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water complete all as specified and as directed.

Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) complete all as specified and as directed.

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for preparation of new surfaces of wall and applying two coat of oil bound distempering over one coat of primer including chalk whiting complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coats of antifungal acrylic emulsion paint over a coat of acrylic emulsion primer complete all as specified and as directed

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings,heads,shoes,bends,swan necks, etc. including cleaning or re-fixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed

S&F 1.25 mm thick Mild steel sheet eaves gutters,galvanised class 3,half round 150mm dia with rounded edges complete all as specified and as directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F Stainless steel coat peg set of five with suitable SS base plate complete all as specified and as directed.

S&F for 4 mm GI wire fixed to poles/walls or any other indicated situation etc completed as specified and directed.

S&F for mild steel works using rolled section conforming to Fe-290-0 Gde E 165 as in flat iron fillets for securing GI wire including cutting to shapes, notching for wire, drilling holes for fixing bolts, cranking etc and similar work complete all as specified and as directed.

M&L for mild steel screw bolts 11 to 15mm dia, length of bolt exc 10 cm and n.exc 15 cm long (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut complete all as specified and as directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes including bolts if required, hooks (stay) heavy for large gates, hooks and pintle hinges, large hasp and staple, chains, hand made sliding bolt, clamp, hold fast, wall ties, hooks for hanging fan, plain angle cleat for securing purlin to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles, confirming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Demolition of PCC in ground floors and paving not exc 15cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed.

Dismantling of steel rolling shutter, steel work including door, gate etc complete all as specified and as directed.

Taking up or down steel water tubing and connection 15 mm dia complete all as specified and as directed.

Taking up or down steel water tubing and connection 20 mm dia complete all as specified and as directed.

S&F steel tubes, medium grade 15mm bore galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F steel tubes, medium grade 20mm bore galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Refixing 15 mm old steel tubing and connections in new or old position (walls, ceiling,floors, etc.) complete all as specified and as directed.

Refixing 20mm old steel tubing and connections in new or old position (walls, ceiling,floors, etc.)complete all as specified and as directed.

S&F in repair vitreous china squatting 'Orissa' pattern, size 580mm x 440mm white with integral foot rest (excluding flushing cistern and flush pipe) complete trap, connection to drain, flushing pipe, complete all as specified and directed

S&F in repair European type WC (Pedestal pattern) complete including pedestal pan and trap including connection to drain, flushing pipe, seat cover (excluding fixing bolt, flushing cistern complete all as specified and directed

Supply only PVC 10 ltr flushing cistern valveless, syphonic action type, low level , white ,with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and as directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F concealed angle cock 15mm bore, fancy type, chromium plated, with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed complete all as specified and as directed

Supply only CP fancy type pillar taps suitable for 15mm dia pipe, cast copper alloy, with capstan heads,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair CP fancy type pillar taps suitable for 15mm dia pipe, cast copper alloy, with capstan heads,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F CP fancy type stop valves suitable for 15mm dia pipe, cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F CP shower roses 125mm with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed

S&F in repair CP fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair PVC Connections 15mm size 600mm long with PTMT nuts complete all as specified and as directed.

S&F in repair Waste coupling 32mm bore for wash hand basin cast copper alloy complete all as specified and as directed.

S&F in repair PVC waste pipe 32mm dia 90cm long for WHB complete all as specified and as directed.

S&F in repair PVC waste pipe 32mm dia with 40mm dia reducer, 90cm long for urinal outlet with 4 Nos screws for fixing pipes complete all as specified and as directed.

S&F in repair Stainless Steel grating 110mm dia with waste pipe hole complete all as specified and as directed.

S&F in repair Stainless Steel grating 75mm dia with waste pipe hole complete all as specified and as directed.

S&F in repair Stainless Steel grating 110mm dia without waste pipe hole complete all as specified and as directed.

S&F in repair Stainless Steel grating 75mm dia without waste pipe hole complete all as specified and as directed.

S&F in repair Stainless Steel soap dish (fancy type) approximated size 160 x 160 x 90 mm complete as specified and directed.

S&F in repairs, towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190 gms) complete as specified and directed.

Demolition of brick work / stone boulder / PCC block masonary, built in cement mortar or cement lime mortar including all quoins, arches pillars, etc but excluding ashlar facing, dressed stone works, precast concrete articles and precast concrete block wallings complete all as specified and as directed.

M&L for providing precast cement concrete (1:3:6) type C1 using 20mm graded stone aggregate block masonary with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

Dismantling floor, wall hearth or tilling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S&F non - skid coloured ceramic tiles 300 x 300 x 7 to 8 mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm screed bed in CM (1:6) complete all as specified and as directed.

S&F coloured glazed ceramic tiles of size 300 x 200 x 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster in cement mortar (1:4) complete all as specified and as directed.

S&F cast iron floor trap 75mm outlet dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F coloured Pre-coated/Pre-painted, Galvalume aluminium zinc coating (aluminium 55% and Zinc 45% alloy coating applied through continous hot deep process), GI based corrugated steel sheet 0.50 mm thick, of any colour (Total coated thickness TCT 0.50mm with minimum coating mass on both sides @ 150gm per sqm in length and width as per site conditions), high tensile steel with yielding strength 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws with compeatable accessories as per manufacturer's instruction, through specialist agencies and as per profiles and shades approved by GE, complete all as specified and as directed.

All as per Ser Item No 106 above but as in ridge/flashing board of width or girth not less than 610mm complete all as specified and as directed.

All as per item No 105 above but fixing only all as directed. Note : Coloured Pre-coated/Pre-painted, Galvalume aluminium items shall be reused as obtained serviceable from item No 104 complete all as specified and as directed.

M & L for MS work as in Wind Tie in roof and MS structural works in trusses,etc with screwed ends including nuts,washers and mild steel plates for walls chimneys,roofs Fe 410-0 or Fe 310-0 complete all as specified .arches etc any kind rods and straining bolts complete all as specified and as directed.

All as per item No 109 above but fixing only all as directed. Note : Wind tie and mild steel items shall be reused as obtained serviceable from item No 103 complete all as specified and as directed.

M&L for preparation of new or previously utreated surfaces of steel and iron of any description over 10cm in width or girth not other wise described and applying one coat of synthetic eamel paint (ordinary tint) complete all as specified and as directed

M&L for preparation of new or previously utreated surfaces of steel not exc 10 cm in width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length all as specified and as directed.

Closing bolt holes or other similar holes in old Asbestos cement sheets by sealing with one bitumen and one plain G.I. washer on either side and 8mm dia bolt and nut, bolt not exceeding 25mm in length (Ditto) all as specified and as directed.

M & L for cement concrete 40mm thick 1:2:4 type B-1 (20mm graded aggregate) and finishing the surface even & smooth without using extra cement as in flooring complete all as specified and directed

kakolil trade agencies

BHARAT MULTITECH INDUSTRIES PVT LTD

V CHINNA DURAI

ANITA VARMA ENTERPRISES

M/s Pintu Furniture