WBIW/EE/JFMPD/e-NIT-12/2025-26

Making rectangular sausage cage with 10 SWG galvanized iron wire of 125mm. x 125mm. mesh wire netting with proper lapping of minimum 150 mm. including sewing the joints with 12 SWG G I wire and supply of all materials and equipments including placing the sausage cage in position, filling the same with boulder or lump agreegates complete as per direction of the Engineer-in-charge but excluding the cost of boulder / lump aggregates and its carriage upto site.(Cost is excluding the cost of end pieces ) C) 1.2 metre X 0.6 metre nominal section

d) 0.9 metre X 0.6 metre nominal section

g) 1.05 metre X 0.6 metre nominal section

f) 1.35 metre X 0.6 metre nominal section

Supplying, fitting, fixing end pieces for rectangular / square / circular sausages at the ends, with 10 SWG / 8 SWG G I wire net of different mesh sizes tying & sewing the same maintaning a lap langth of 150 mm all around with 12 SWG G I wire complete, including the cost of supply of wire netting,fitting etc, complete as per direction of the Engineer - in - charge. b) Mesh size 125 mm x 125 mm with 10 SWG wire

Labour charge for dumping / laying of Laterite / Stone Boulders / Shingles / Brick Bats, from stack of worksite with all leads and lifts in water or spreading the same on the slope of the bank of River/Sea or the slope of the embankment or in the River/ Sea bed to an uniform thickness as per direction of the Engineer-in-charge including cost of all accessories and other incidental charges. (a) Boulder 25kg & above where boats are not necessary.

Supply of laterite boulders at site each weighing 20 kg and upto 40 kg including cost of material, loading, unloading and carriage and including all incidental charges like Royalty complete. (Royalty certificate in original from competent authority are to be submitted along with the bill, otherwise amount due towards Royalty of stone/ laterite boulder will be deducted from the bills of works.) C) Laterite Boulder (Each weighing 20Kg & up to 40 Kg)

Cutting uprooting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by Engineer-in-charge.

Labour charges for stacking unloaded boulder / shingles to make them convenient for measurement as per direction of the Engineer-in-charge. a) Boulder of size above 20 kg

Extra rate over item no -4 for carrying boulder by head load for each additional lead of 50 m or part thereof beyond initial distance of 50 m, upto a distance of 200 m 4 nos of lead

Supplying Jhaw / Eucalyptus bullah piles at work site, including dressing and making one end pointed. iii) 15 Cm av. Diameter

iv) 17.5 Cm av. Diameter

Labour for driving Jhaw / Eucalyptus bullah piles by monkey in all sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. iii) 15 Cm av. Diameter

iv) 17.5 Cm av. Diameter

Supplying, fitting and fixing with iron nails half split bullah wailing piecesand cross pieces etc. complete with cost of all materials and carriage to site. a) Width of thinner end above 10 cm. and less than 15 cm. (i) Jhaw / Eucalyptus

Coal tarring with 5% pitch including cost of materials and labour complete as per direction of the Engineer-in charge. (a) Double Coat

Supplying Nylon cage netting 1 metre x 1 metre x 1 metre size with knot having mesh size 17.5 cm x 17.5 cm constructed with nylon thread (210 x 24) having tensile strength not less than 250 Kg. / sq. cm. including carriage, delivery and stacking at site inclusive of all taxes complete.

Labour charges for dumping and placing in position properly filled in Nylon crates with filled in gunny / poly cement bags (minimum 25 nos.having capacity 50 kg) with local earth or sand, sewing and tying the crate with nylon wire within a lead of 150 m. and all lifts in river slope or y cutting trenches upto 50 cms depth, if necessary, or by boatincluding cost of hire charges of boat, boatmen and other necessary pments and also including cost of bags, carriage and charge of filling bags with earth / sand but excluding cost of nylon crate as per direction of the Engineer – in – Charge. NB:- Volume of each earth/ sand filled bags should not be less than 0.028 m3. Size of Nylon crate is 1metre X 1metre X 1metre. (i) Where boats are not necessary.

Supplying to site empty cement polythene bags(capacity 50 kg) in good condition including stacking, incedental charges etc. all complete ( capacity 50 kg)

Labour charges for filling empty cement gunny bag/polythene bag ( capacity 50 kg) with all kinds of earth (Wet or dry) sand or agreegates ( stone/ brick) and sewing as done in case of cement bags, (tying with a knot after filling will not be accepted) andd stacking with within a lead of 30 metre as per direction of Engineer-in-charge( cost is excludding the cost of any types of filling materials). NB:- Volume of earth / Sand filled bags should not be less than 0.028 cum/bag.

Dumping in position earth/ sand filled gunny/ poly bags (Capacity 50kg) within a lead of 30 metre inclusive of all lifts.

Extra rate for item no above for each additional lead of 60 metre or part thereof beyond the initial lead of 30 metre.

Supplying, dressing and stacking at site bamboo pins above 5 cm. Diameter and upto 7.5 cm. diameter (Dia. to be measured at mid length).

Driving bamboo pins in standing or flowing water including scaffolding and driving appliances.(a)Where boats are not necessary.

Supplying, fiting, fixing with iron nails, half split bamboo wailing pieces. ( av. Dia. of bamboo not less than 5.00 cm.)

Earthwork in excavation in the canals / drainage channels / borrow pits / River bed / slope of bank as noted below as per designed section & throwing the spoils in layers of 25 cm. for making banks as per profile or to deposit the same in any other place within an initial lead of 30 metre and initial lift of 1.5 metre including breaking clods, rough dressing etc. complete as per direction of the Engineer-in-charge. (a) Ordinary soil / local soil / soil mixed with moorum or kankar / silt, dry or moist / slushy silt / sticky soil.

Making filter with well graded 40mm down ballast sand laying uniformly behind weepholes, below pitching on bed, side slopes including supply and carriage of all materials to site including preparing bed with earth work upto 30cm depth ,where necessary and compacting with wooden malllet after laying to achieve designed section as per direction of the Engineer-in-Charge (measurements will be on finished work /in stack after deducting necessary void).) (a) Jhama ballast

Labour charges for bouIder pitching on top and slope by placing required boulders (each weighing 25Kg. and above within lead of 100metres and all lifts) including filling the interstices with fragments as required, preparing sub-grade by cutting or filling the earth on slope upto 7.5cm. depth, watering and ramming where necessary complete as per direction of the Engineer-in-charge. a) Over Jhama Khoa / metal filter/ Geo-textile filter.

Earthwork in excavation in all kinds of soil for making embankments, repairs to the embankment, closing breaches etc. as per profile including supply and transporting the earth by truck or tractor or any other mechanical means on land, including loading, transporting, unloading and stacking with all lifts bothways and head load where necessary and depositing the same on embankments, clannels, filling depressions in requisite profile, levelling as per direction of the Engineer-in-charge within a lead of, NB :- Measurement to be taken on the basis of stack measurement / pre-post work section measurement after deduction of void as per norms. No extra payment will be made for stacking. B) Beyond 1.00 km and upto 2.00 km

Making cubical bamboo porcupine cages with bamboo of 60 mm to 75 mm dia. having length of 1.8 metre each for all horizontal and vertical struts and 2.5 metre length for diagonal struts, 3 nos horizontal and 3 nos vertical struts should be placed equi-distant from each face to make the square cage of outer dimension 60 cm x 60 cm and projecting each strut by 60 cm on all directions. Two nos dioganals or cross bamboo posts should be placed on each face having their centre tied with the centre of cage properly including fitting, fixing corners, vertical, horizontal and diagonal struts with iron nails not less than 20 cm long and tying corners with 16 SWG galvanized iron wires, filling the cages with 1st class kiln burn Brick @ 40 nos bricks per cage. Cages builts with 10 SWG hexagonal or square pattern 10 cm mesh, with proper lapping, tying and sewing with 10 SWG GI wire including cost of all materials, carriage to site and laying the same in the bed or slope of the river etc. complete as per direction of the Engineer - in - Charge (N.B:-If GI wire netting is not considered then Rs.215.00 percage may be deducted from the following costs, towards cost of wire netting including OH and conctarcor's profit .) For cages of size 60cm x 60cm x 60cm with 1st class kiln burn Bricks (a) Single Cage

Please Enable Macros to View BoQ information