Repair to Path, Kerb stone, stone pitching and road furniture in domestic area at Air Force Station Jaisalmer

Amount

Demolition of stone slab and tiles laid dry and pointed of any description or thickness in floor, approns complete all as specified and directed.

Machine pressed factory made rubber moulded precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement with pigment and including 40mm thick machanicaly compacted thickness of sand/stone dust bedding below pavor tiles laid to required level & slope complete all as specified and directed.

100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring, finishing cement concrete surface fair and even complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) as in ground floors, copings and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

Providing precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in kerbs stone and the likes including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Preparation of newly surface of road side kerb stone and applying two coats of water base road marking paint complete all as specified and directed.

Preparation of old surfase of road side kerb stone and applying one coats of water base road marking paint complete all as specified and directed.

Precast cement concrete (1:3:6), type C-1 (using 20mm graded stone aggregate) as in solid block masonary exceeding 10cm and set in cement and sand mortar (1:6), including demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, precast concrete articles etc complete all as specified and directed.

Providing cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in coping, plinth courses, parapets and the likes including weathering, slightly rounded or chamfered angles and throating and use of form work complete all as specified and directed.

Rendering 15mm thick in cement and sand mortar (1:4) on fair faces of stone masonry or concrete surfaces and finished even and smooth (without using extra cement) complete all as specified and directed.

Preparation of newly plastered and unplastered surface of walls and applying two coats of white wash complete all as specified and directed.

Double legged informatory sign board of size (1.20m x 1.20m) fixed on single frame, both side and meeting back to back on the stainless steel 50x50x3.65mm square pipe. The board are of high intensity grade reto-reflective sheeting of avery dennison made out of 2mm thick alcoband sheet/aluminium composite pannel sheet confirming to IS-736, colour as approved by Engg-in-Charge and stainless steel square pipe of size 50x50x3.65mm with nut and bolt. The lettering will be computerised cut to high intensity grade white sheeting (Avery Dennison) and mechanically fixed on board over verticle post 50mm stainless square pipe, 3.65 mm thick 3.20m long having 2 Nos flat iron strip of strip 40x5 mm, 0.30mm long on bottom and fixed with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) in post holes including dismentaling of old board complete all as specified and directed.

Informatory sign board of size (1.20m x 1.20m). The board are of high intensity grade reto-reflective sheeting of avery dennison made out of 2mm thick alcoband sheet/aluminium composite pannel sheet confirming to IS-736, colour as approved by Engg-in-Charge. The lettering will be computerised cut to high intensity grade white sheeting (Avery Dennison) and mechanically fixed on board both side including dismentaling of old board and fixed nut and bolts on the stainless steel frame complete all as specified and directed.

Reboundable delineator height 1010mm, two high performance 100mm dia reflectors and two rectangular reflectors of 70mmx 23mm are fixed on both sides of guide post, the body of guide post is moulded in ABS plastic and fixed on dully powder coated steel pipe anti-rust and anti theft steel for avoidance of accidents, bollards type, help the driver to keep them away from road hazards and including dismantling of old delinator and fixed with PCC 1:3:6 type C1 (using 20mm graded stone aggregates) in post holes of size 0.30x0.30x0.30mtr complete all as specified and directed.

Galvanized steel water tubing light grade of 100mm bore with & including all fittings and complete to laid in trenches, including taking up or down old unserviceable steel water tubing and connections complete all as specified and directed.

Factory made chequered cement concrete tiles, 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, over and including 15mm thick screed bed in cement and sand mortar 1:6 and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

10mm thick, size 300x300mm coloured endura parking tiles over and including 15mm thick screed bed in cement and sand mortar 1:6 and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

deepaktraders

M/s Ramesh & Company

M/s B R Saran Kotda

M/S SOLANKI GENERAL SUPPLIERS

Leelashah Enterprises

Bhawani Construction Company