Janpad fatehpur ke ashapur me lok nirmaan vibhag ke nirikshan bhawan ke kaksh sankhya 01 avum kaksha sankhya 02 me vidhyutikaran ka karya

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required..( Group C) P.S. No. 1.10.3

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. P.S. No.1.11

Supplying and Fixing metal box of 75mm X 75mm X 60mm deep (nominal size) on surface size or in recess with suitable size of phenolic laminated sheet cover in front Cover connections painting etc. as required. P.S. No. 1.22.1

Supplying and Fixing Sitable size G.I. box with modular plate and cover in front on surfece on in in recess including providing and fixing 6 pin 5/6 A &. 15/16A Modular socket outlet and 15/16 A Modular switch , connections etc. as required. P.S. No. 1.32

Supply and drawing of inverter wiring point light/fan /plug with 1.5 sq mm FRLSH PVC insulated copper conductor ,single core cable in surface /recessed steel & PVC Conduict as required. P.S. No. 1.17.1

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core (multi stranded) cable in surface/ recessed medium class PVC conduit as required. Make Havells / Legrand / KEI or equivalent.

.2X 1.5 sqmm + 1 X 1.5 sqmm earth wire. P.S. No. 1.14.1

2 X 2.5sq.mm+1X2.5sq.mm earth wire. P.S. No.1.14.2

2 X 4sq.mm+1X4sq. mm earth wire. P.S. No. 1.14.3

2 X 6sq.mm+1X6sq. mm earth wire. P.S. No. 1.14.4

4 X 16sq. mm +2X 6 sq. mm earth wire. P.S. No. 1.14.11

.Supply and Fixing moduler Bell Push moduler plate etc. as required. P.S. No. 1.24.8

.Supply and Fixing moduler T.V.Anteena Socket Outlet moduler plate etc. as required. P.S. No. 1.24.7

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

a- 5/6 amps switch. P.S. No. 1.24.1

b- 3 pin 5/6 amp socket outlet. P.S. No. 1.24.4

Supplying and fixing of 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. P.S. No. 1.33

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/ PVC conduit as required. P.S. No. 1.19

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. P.S. No. 1.38

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep. P.S. No. 1.50.1

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. P.S. No. 2.18

Supply & fixing 4 way TPN ,horizontal type three pole and neutral , sheet steel ,MCB distribution board , 415 V ,on surface / recess , complete with tinned copper bus bar ,neutral busbar , earth bar , din bar, interconnections, powder painted including earthing etc. as required.(But without MCB /RCCB/Isolator). P.S. No. 2.5.1

Supply & fixing 8 way Double Door SPN ,(single pole and neutral) , sheet steel ,MCB distribution board , 240 V ,on surface / recess , complete with tinned copper bus bar ,neutral basbar , earth bar , din bar, interconnections, powder painted including earthing etc. as required.(But without MCB /RCCB/Isolator). P.S. No. 2.3.2

Supply and fixing of 6 Amp. to 32 Amp. MCB.(10KA). P.S. No. 2.10.1

Earthing with G.I earth plate 60 mm X 600 mm X 6 mm thick including accessories ,and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc with charcoal/ coke and salt as required. P.S. No. 5.4

Supply & laying 25 mm X 5mm G.I. Stripe at 0.50 metre below ground level for earth conductor earth electrode , including connection /termination with copper thimble etc.as required. directed at site. P.S. No. 5.11

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer- Incharge.

a- 2X6 sq mm (19 mm). P.S. No. 11.1.1

b- 4X10 sq mm (19 mm). P.S. No. 11.1.32

c- 4X16 sq mm (28 mm). P.S. No. 11.1.33

d- 3-1/2X 35 sq mm (32 mm). P.S. No. 11.1.21

Supply and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting. P.S. No. 13.34

Supply, installation, Testing and Commissioning of 1200mm sweep, BEE 5 star rated, ceilling fan with Brush Less direct current (BLDC) moter ,class of insulation ;B 3 no. blades ,30 cm long down rod, 2nos canopies , shackle rope, copper wiring , power facter not less than 0.9 , service value (CM/M/W) minimum 6.00 , AIR delivery miniimum 210 Cum/Min, 350 RPM (tolerance as per IS : 374 -2019), THD less than 10% ,remte or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise =75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz , single phase AC Supply ,earthing etc.comple as required. P.S. No. 9.1.3

Supply and fixing of 18-22W LED Batten fitting with Extruded Aluminum housing, special polycarbonate diffuser for glare free light distribution and suitable mounting for on both surface & suspended,1980-2420 system lumens, >110 Lm/W, PF>0.95, THD<10%,MAke Havells/Philips/Bajaj or equivalent CRI >80, with 3 year warrantee Compelete in all respect. P.S. No. 8.9.1

Supply and fixing of LED Street light fitting with Mandatory driver set heavingdie cost aluminium body with toughend glass/UV suitable stabilized PC cover and lenses suitable for 140 watt to 150watt and confiming to IP 66 and IK 07 and above protection heaving company LOGO Engraved complete in all respect including labour. CAT-AAA 16800-18000 system lumens, high power LED with lenses>120Im/W, PF>0.95, THD<10% at full load CRI>70 potted driver set in metal housing (not circuilory ) phase to phase protection at 440V &> 300 V auto cut and restart feature, 4 KV internal suger protection with 5 Year warantee. P.S. No. 8.12.15

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. including excavation and refilling The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

a-10 sq mm 4 core. P.S. No. 20a.1.8

b-35 sq mm 3-1/2 core. P.S. No. 20a.1.11

Supply and fixing 40A DP MCB 240V/415 V, 10 kA, "C" curve, miniature circuit breaker complete in all respect. P.S. No. A/R

Supply and fixing 40 A FP MCB 240V/415 V, 10 kA, "C" curve, miniature circuit breaker complete in all respect. P.S. No. A/R

S/F of Modular Computer Board with 2 No's. 5/6 Amp. Switch & Socket and 1 no. 15/16 Amp. Switch & Socket. P.S. No. A/R

S/f of of Extended TV Board including 2 Nos. 6 Amp. Switch & 2 Nos. 6 Amp. Socket complete without Submain. Havells or equivalent. P.S. No. A/R

S/f of of Extended Aquagaurd Board including 1 No. 6 Amp. Switch & 1 No. 6 Amp. Socket complete without Submain. Havells or equivalent. P.S. No. A/R

Supply and fixing of Single LED light wall bracket 3 to 6 Watt on complete in all respect. P.S. No. A/R

S/f of of LED Gate Light 20 Watt.complete Havells or equivalent Make. P.S. No. A/R

S/F of LED Mirror Light fitting 8 Watt complete in all respect Philips or equivalent. P.S. No. A/R

Supply of Heavy Duty Exhaust Fan 300 mm. sweep 900 RPM. Havells or equivalent. P.S. No. A/R

Supply Metallic body fresh air fan 200 mm. sweep. Havells or equivalent. P.S. No. A/R

Supply and fixing of 63 Amp. FP MCCB (16 KA) with Enclosoures Complete Havells /Equvelent make. P.S. No. A/R

Supply and fixing of 40 Amp. FP Change Over Switch (36 KA) C-Series Complete Havells /Equvelent make. P.S. No. A/R

L/C of dismanataling of wiring, D.B, Sunk Box, Main Switch etc. including cost of labour. P.S. No. A/R

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as pe direction of the Engineer-Incharge.

a-6sq mm 2 core. P.S. No. Q/R

b-10sq mm 2 core. P.S. No. Q/R

c-16sq mm 2 core. P.S. No. Q/R

d-35sq mm 3-1/2 core. P.S. No. Q/R

Please Enable Macros to View BoQ information