Repairs and Renovation to KSSIDC administrative office at Industrial Estate Davanagere, Davanagere District

Repairs and Renovation to KSSIDC administrative office at Industrial Estate Davanagere, Davanagere District

Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing an...

Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-c...

Demolishing cement concrete manually- by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. ---- as per the standard tender docume...

Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles above 25 mm ...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings and bridges and such simillar works in all kinds of soils, as per ...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings and bridges and such simillar works in all kinds of soils, as per ...

Filling approved earth -excluding rock- in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite-trap-basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite-trap-basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08percentage and conforming to IS- 15622, of approved make, in all colours and sh...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace-Chajjas-Sunken portion of WC-Bathroom, cold applied ...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm -thickness to be specified by the manufacturer-, of 1st quality conforming to IS - 15622, of approved make, in all colours, shades, e...

Providing 12 mm cement plaster with cement mortar 1-4 -1 cement- 4 fine sand- to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1-3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Dismantling doors, windows and clerestory windows -steel or wood- shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...

Providing and laying in position Cement Concrete for all Foundation works.The granite-trap-basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super...

Steel Fabrication Supplying, fitting and placing TMT FE 550 - 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping-we...

Providing and laying 5mm thick Self levelling Epoxy Flooring for Residential, Commercial, Sports and Industrial purpose made of reputed brand applied at 1L-m2 on existing Concrete substrate of 25Mpa o...

Providing Waterproof treatment to the cracks using 1 coat of bondcoat of SBR latex and Cement at the ratio 1-1 and then preparing Cement Mortar of 1-3 admixed with SBR latex at a dosage ...

Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1-6 -1 cement - 6 coarse sand- including cost of all materials, labour, sc...

Providing 12 mm cement plaster with cement mortar 1-6 -1 cement-6 fine sand- including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of ma...

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1-6-12 -1 cement - 6 coarse sand - 12 graded stone aggregate 20 mm nominal size- up...

Providing 20 mm cement plaster of mix -1-4 -1 cement- 4 fine sand- to brick-stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC -Volatile Organic Compound - content less than 50 g-L of approved brand and manufacture, including applying additional c...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt and pick up resistant, Alkali and Water resistant of required shade- New ...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Applying priming coat- With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron- steel works including preparing the surface after thorougly cleaning ...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied at 0.90L-10 m² over an under coat of primer applied at 0.80 L-10 m² of approved brand and manufacture incl...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves -excluding cost of cement concrete and side c...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1-3-6 of 20mm and down size grani...

Providing and fixing bright finished brass handles with screws etc. complete- Brass handles 125 mm with plate 175x32 mm ---- as per the standard tender document

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete - 125x85x5.5 mm -heavy type- ---- as per the standard tender document

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles -best make of approved quality- for aluminium doors including necessary cutting and making good etc. compl...

Providing and fixing bright finished brass tower bolts -barrel type- with necessary screws etc. complete - 250x10mm ---- as per the standard tender document

Providing and fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC-Matching to RAL-9016- sections and with minimum TiO2-Titanium Dioxide- at 6PHR with TPE-Thermo Plastic Elasto...

Providing and fixing of louvered ventilator made out of multi chambered UPVC-Matching to RAL-9016- sections and with minimum TiO2-Titanium Dioxide- at 6PHR with TPE-Thermo Plastic Elastomer- and lead ...

Providingand fixing of Openable door made out of multi chambered UPVC-Matching to RAL-9016- sections and with minimum TiO2-Titanium Dioxide- at 6PHR with TPV-Thermo Plastic Vulcanized- and lead free w...

Dismantling doors, windows and clerestory windows -steel or wood- shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...

Providing Waterproof treatment to the cracks using 1 coat of bondcoat of SBR latex and Cement at the ratio 1-1 and then preparing Cement Mortar of 1-3 admixed with SBR latex at a dosage ...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Applying priming coat- With ready mixed pink or Grey primer of approved brand and manufacture on wood work -hard and soft wood- including preparing the surface after thorougly cleaning oil, grease, di...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied at 0.90L-10 m² over an under coat of primer applied at 0.80 L-10 m² of approved brand and manufacture incl...

Providing and fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC-Matching to RAL-9016- sections and with minimum TiO2-Titanium Dioxide- at 6PHR with TPE-Thermo Plastic Elasto...

Providing and fixing of louvered ventilator made out of multi chambered UPVC-Matching to RAL-9016- sections and with minimum TiO2-Titanium Dioxide- at 6PHR with TPE-Thermo Plastic Elastomer- and lead ...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC -Volatile Organic Compound - content less than 50 g-L of approved brand and manufacture, including applying additional c...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt and pick up resistant, Alkali and Water resistant of required shade- New ...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves -excluding cost of cement concrete and side c...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1-3-6 of 20mm and down size grani...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing bright finished brass handles with screws etc. complete- Brass handles 125 mm with plate 175x32 mm ---- as per the standard tender document

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete - 125x85x5.5 mm -heavy type- ---- as per the standard tender document

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles -best make of approved quality- for aluminium doors including necessary cutting and making good etc. compl...

Providing and fixing bright finished brass tower bolts -barrel type- with necessary screws etc. complete - 250x10mm ---- as per the standard tender document

Providingand fixing of Openable door made out of multi chambered UPVC-Matching to RAL-9016- sections and with minimum TiO2-Titanium Dioxide- at 6PHR with TPV-Thermo Plastic Vulcanized- and lead free w...

Dismantling doors, windows and clerestory windows -steel or wood- shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...

Providing Waterproof treatment to the cracks using 1 coat of bondcoat of SBR latex and Cement at the ratio 1-1 and then preparing Cement Mortar of 1-3 admixed with SBR latex at a dosage ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite-trap-basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08percentage and conforming to IS- 15622, of approved make, in all colours and sh...

Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Applying priming coat- With ready mixed pink or Grey primer of approved brand and manufacture on wood work -hard and soft wood- including preparing the surface after thorougly cleaning oil, grease, di...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied at 0.90L-10 m² over an under coat of primer applied at 0.80 L-10 m² of approved brand and manufacture incl...

Providing and fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC-Matching to RAL-9016- sections and with minimum TiO2-Titanium Dioxide- at 6PHR with TPE-Thermo Plastic Elasto...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC -Volatile Organic Compound - content less than 50 g-L of approved brand and manufacture, including applying additional c...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt and pick up resistant, Alkali and Water resistant of required shade- New ...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves -excluding cost of cement concrete and side c...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1-3-6 of 20mm and down size grani...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing bright finished brass handles with screws etc. complete- Brass handles 125 mm with plate 175x32 mm ---- as per the standard tender document

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete - 125x85x5.5 mm -heavy type- ---- as per the standard tender document

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles -best make of approved quality- for aluminium doors including necessary cutting and making good etc. compl...

Providing and fixing bright finished brass tower bolts -barrel type- with necessary screws etc. complete - 250x10mm ---- as per the standard tender document

Providing and fixing Steel work welded in built up sections- framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 g. ---- as per the standard tender document

Providing and fixing gun metal non- return valve of approved quality -screwed end- - Horizontal ---- as per the standard tender document

Providing and fixing gun metal non- return valve of approved quality -screwed end- - Horizontal ---- as per the standard tender document

Providing and fixing C.P. brass stop cock -concealed- of standard design and of approved make conforming to IS-8931. ---- as per the standard tender document

Providing and fixing brass stop cock of approved quality - 20 mm nominal bore. ---- as per the standard tender document

Providing and fixing ball valve -brass- of approved quality, High or low pressure, with plastic floats complete - 15 mm nominal bore. ---- as per the standard tender document

Providing and fixing ball valve -brass- of approved quality, High or low pressure, with plastic floats complete - 20 mm nominal bore. ---- as per the standard tender document

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality -screwed end- - 25 mm nominal bore. ---- as per the standard tender document

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet - 150 mm diameter ---- as per the standard tender document

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS-8931 ---- as per the standard tender document

Providing and fixing Chlorinated Polyvinyl Chloride -CPVC- pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pip...

Providing and fixing Chlorinated Polyvinyl Chloride -CPVC- pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pip...

Providing and fixing Chlorinated Polyvinyl Chloride -CPVC- pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pip...

Providing and fixing Chlorinated Polyvinyl Chloride -CPVC- pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i-c fixing the pipe with...

Providing and fixing Chlorinated Polyvinyl Chloride -CPVC- pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i-c fixing the pipe with...

Cutting holes up to 30x30 cm in walls including making good the same- With common burnt clay F.P.S. -non modular- bricks. ---- as per the standard tender document

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1-2-4 -1 cement - 2 coarse sand - 4 g...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS - 13592 Type A, including jointing with seal ring conforming to IS - 5382, leaving 10 mm gap for thermal exp...

Providing and fixing water closet squatting pan -Indian type W.C. pan - with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing 8 mm dia C.P. - S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. ---- as ...

Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality and make as approved by Engineer in charge. ---- as per the standard tender document

Providing and fixing 600x450 mm beveled edge mirror of superior glass -of approved quality- complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weigh...

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- as per the standard tender document

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm -inner dimensions- with modular bricks of CD 75 in cement mortar 1-6, bed concrete 150mm thick with 1-3-6, plaster...

Providing PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150 x 100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 and ...

Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 g. ---- as per the standard tender document

Providing and fixing gun metal non- return valve of approved quality -screwed end- - Horizontal ---- as per the standard tender document

Providing and fixing gun metal non- return valve of approved quality -screwed end- - Horizontal ---- as per the standard tender document

Providing and fixing C.P. brass stop cock -concealed- of standard design and of approved make conforming to IS-8931. ---- as per the standard tender document

Providing and fixing brass stop cock of approved quality - 20 mm nominal bore. ---- as per the standard tender document

Providing and fixing ball valve -brass- of approved quality, High or low pressure, with plastic floats complete - 15 mm nominal bore. ---- as per the standard tender document

Providing and fixing ball valve -brass- of approved quality, High or low pressure, with plastic floats complete - 20 mm nominal bore. ---- as per the standard tender document

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality -screwed end- - 25 mm nominal bore. ---- as per the standard tender document

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet - 150 mm diameter ---- as per the standard tender document

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS-8931 ---- as per the standard tender document

Providing and fixing Chlorinated Polyvinyl Chloride -CPVC- pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pip...

Providing and fixing Chlorinated Polyvinyl Chloride -CPVC- pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pip...

Providing and fixing Chlorinated Polyvinyl Chloride -CPVC- pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i-c fixing the pipe with...

Providing and fixing Chlorinated Polyvinyl Chloride -CPVC- pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i-c fixing the pipe with...

Cutting holes up to 30x30 cm in walls including making good the same- With common burnt clay F.P.S. -non modular- bricks. ---- as per the standard tender document

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1-2-4 -1 cement - 2 coarse sand - 4 g...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS - 13592 Type A, including jointing with seal ring conforming to IS - 5382, leaving 10 mm gap for thermal exp...

Providing and fixing water closet squatting pan -Indian type W.C. pan - with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing 8 mm dia C.P. - S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. ---- as ...

Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality and make as approved by Engineer in charge. ---- as per the standard tender document

Providing and fixing 600x450 mm beveled edge mirror of superior glass -of approved quality- complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weigh...

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- as per the standard tender document

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150 x 100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 and ...

Providing and fixing gun metal non- return valve of approved quality -screwed end- - Horizontal ---- as per the standard tender document

Providing and fixing gun metal non- return valve of approved quality -screwed end- - Horizontal ---- as per the standard tender document

Providing and fixing C.P. brass stop cock -concealed- of standard design and of approved make conforming to IS-8931. ---- as per the standard tender document

Providing and fixing brass stop cock of approved quality - 20 mm nominal bore. ---- as per the standard tender document

Providing and fixing ball valve -brass- of approved quality, High or low pressure, with plastic floats complete - 15 mm nominal bore. ---- as per the standard tender document

Providing and fixing ball valve -brass- of approved quality, High or low pressure, with plastic floats complete - 20 mm nominal bore. ---- as per the standard tender document

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality -screwed end- - 25 mm nominal bore. ---- as per the standard tender document

Providing and fixing Chlorinated Polyvinyl Chloride -CPVC- pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pip...

Providing and fixing Chlorinated Polyvinyl Chloride -CPVC- pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pip...

Cutting holes up to 30x30 cm in walls including making good the same- With common burnt clay F.P.S. -non modular- bricks. ---- as per the standard tender document

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1-2-4 -1 cement - 2 coarse sand - 4 g...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS - 13592 Type A, including jointing with seal ring conforming to IS - 5382, leaving 10 mm gap for thermal exp...

Providing and placing on terrace -at all floor levels- polyethylene water storage tank, IS - 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Waste Water Treatment by Prefabricated anaerobic Bio Septic

tank - -For 100 Souls-10KLD-

Providing, installation and commissioning of an anaerobic Bio Septic tank with all necessary accessories such a...

Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.5...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.5...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.5...

Steel Fabrication Supplying, fitting and placing TMT FE 550 - 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping-we...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1-5 -1 cement - 5 coarse sand- and a top layer 6 mm thick cement plaster with cement mortar 1-3 -1...

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars ...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and fixing MS casing collars as per IS 1239 -part-II- 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm -minimum-The dimension...

Providing and laying at site of work MS casing caps as per IS 1239 -part- II- 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm -minimum...

Providing PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing, Single Phase Submersible Pump Sets of 100mm dia -4 inch- suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...

Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400...

Supplying and drawing 3 core flat sheathead submergible pump cable manufactured with electronic grade copper with flexible copper with low resistance conducter confirming to table 3 class of 5 IS 8130...

supplying of 1.1KV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathed galvanized steel strip -except 2Cx10 sqmm wire armoured - confirming to IS- 3975 - 1990 - No. of strip ...

Labour charges for laying of 1.1KV class UG cable when supplied agency in existing trench GI pipe stone ware pipe -on wall -on pole as required -69-5- in existing trench duct 25 sqmm to 75 sqmm -41-6....

Filling available excavated earth -excluding rock- in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Water purification plants- Supplying, Installation and Commissioning of automatic Water purification plant -RO+UF- with all accessories piping, product water tank on single phase power supply as per t...

Wet Mix Macadam -Plant mix method- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...

Prime Coat over WMM-WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of ...

Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.25 kg-m2 on Granular Surface. ---- as per the standard tender document

Providing and laying Bituminous Macadam with 100 tph capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-40 at 3.3percentage by weight of...

Providing and laying Semi Dense Bituminous Concrete with 40-60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 at 5percentage ...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to m...

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Providing and laying in position Cement Concrete for all Foundation works.The granite-trap-basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super...

Providing and laying in position Cement Concrete for all Foundation works.The granite-trap-basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height.The granite-tr...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height.The granite-tr...

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1-6-12 -1 cement - 6 coarse sand - 12 graded stone aggregate 20 mm nominal size- up...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50 m to 3.50 m height...

Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1-4 -1 cement- 4 coarse sand- including cost of all materials, labour, sca...

Providing and fixing Steel work welded in built up sections- framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1-4 -1 cement- 4 fine sand- including rounding off corners wherever required smooth rendering, providing and removi...

Finishing walls with 100percentage Premium acrylic emulsion paint having VOC less than 50 g-L and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of re...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade -Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing SandS RCC SPUN - VIBRATED CAST PIPES -REINFORCED- pipes NP-3 Class conforming to IS-458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work s...

The Non Return Valve (NRV) assembly complete with rubber '0' ring 13.2.13 ---- as per the standard tender document

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl and Impeller with Low volt Motor as per specifications, to work site as per necessary ...

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13-8130-1984 and virgi...

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING-1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400-440 V grade, for power factor improvement of rotating machineries like induction motor. Each 3KVAR Rs...

Fixing a shunt capacitor of . kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor.upto 5 kVAR PWD SR 2023-24 SlNo.5.4.1 ...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

FOR SUMP TO OVER HEAD TANK -Supply and delivery of Centrifugal pumpset at site brand new bestmake and with discharge duty confirming to ISI standards and its latest

amendments. 2 HP, Size 50x40 Head 2...

Supply, installing,testing and commissioning COMMON control panelconsisting of the following INCOMING-1 No set of Phase indicatinglamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No AnalogVol...

13.47 Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump upto 10HP confirming with ISI mark and its latest amendments.

Each 1750 ---- as per the standard tender d...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm,...

Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering and leveling the ground for all works other than foundation and depth in all kinds of soil not e...

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LT UG Cable Up to 4C x 50 Sqmm ESCOM SR 2023-24 SlNo.249 Code No.35.01 ---- as per the standard tender document

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.15" x 12...

Supplying and fixing of Porcelain fuse channel with cut out on existing wooden-panel using necessary nuts, bolts and washers.63 A PWD SR 2023-24 SlNo.5.7. ---- as per the standard tender document

Light Duty GI pipe of 40mm dia BWSSB SR 2023-24 Sl no 11.1.5 ---- as per the standard tender document

1.1 kV Class HR (Heat Resistant) PVC

Insulated and Sheathed Aluminium Single

Core Lead wires as per IS-694- 2010 373 48.03 PVC Wire - 6 Sqmm Weight per 100 Mtr Coil- 3.5 Kg ESCOM SR 2023-24 ---- as ...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm,...

Laying of cable in Existing Trench-GI pipe-Stone Ware-RCC Hume pipe using Wooden-Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm ---- as per the standard tender document

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Fabricating, supplying and erection of . ms long hot dip GalvanizedOctagonalhotdipPolewithBSEN10025gradeS355 JOsteelplatefor shaft, IS2062forbaseplatewithdooropening arrangements, includingsuitableboa...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.Single Arm Bracket with 1000 mm Standa...

Internal Electrification- Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood pl...

Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling...

Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling...

Supplying and wiring adopting loop system in existing PVC Conduit

-casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper ...

Supplying and wiring adopting loop system in existing PVC Conduit

-casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper ...

Supplying and wiring adopting loop system in existing PVC Conduit

-casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper ...

Supplying and wiring adopting loop system in existing PVC Conduit

-casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper ...

Supplying and wiring adopting loop system in existing PVC Conduit

-casing capping casing capping using 2x1.5Sqmm (Phase and Neutral) and 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper ...

Wiring for lighting-power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting-power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting-power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting-power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting-power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and fixing surface-flush mounting unbreakable PVC modular box suitable for mounting modular switchplate swith due groove cutting in Brick-C.Cwall, including necessary rawl plugs, Machine-NF ...

Supplying and fixing surface-flush mounting unbreakable PVC modular box suitable formountingmodular switchplateswithdue groove cutting inBrick-C.Cwall, including necessary rawl plugs, Machine-NF screw...

Supplying and fixing surface-flush mounting unbreakable PVC modular box suitable for mountingmodular switchplateswithdue groove cutting inBrick-C.Cwall, including necessary rawl plugs, Machine-NF scre...

Supplying and fixing surface-flush mounting unbreakable PVC modular box suitable formountingmodular switchplateswithdue groove cutting inBrick-C.Cwall, including necessary rawl plugs, Machine-NF screw...

Supplying and fixing surface-flush mounting unbreakable PVC modular box suitable for mountingmodular switchplateswithdue groove cutting inBrick-C.Cwall, including necessary rawl plugs, Machine-NF scre...

Supplying and fixing surface-flush mounting unbreakable PVC modular box suitable for mountingmodular switchplateswithdue groove cutting inBrick-C.Cwall, including necessary rawl plugs, Machine-NF scre...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch ---- as per the standard tender document

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch ---- as per the standard tender document

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket ---- as per the standard tender document

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module ---- as per the standard tender document

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch ---- as per the standard tender document

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6-16A Universal Socket ---- as per the standard tender document

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. ---- as per the standard tender document

Supplying and fixing regular MCB distribution boards on wall-ood board - flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase-3 p...

Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA 16 - 32 A SP ESCOM SR 2023-24 Sl no 5.46.1 ---- as per the standard tender document

40 A TP ESCOM SR 2023-24 Sl no 5.46.1 ---- as per the standard tender document

32A DP Switch ESCOM SR 2023-24 Sl no 3.6.9 ---- as per the standard tender document

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS-374-19 and also comply with IS- 1709-1984 with latest amendment, Rated voltage 220 V-50 Hz,Rated power upto ...

Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours and 70percentage lumen maintenance with CRI greater than 80. Power Input- 220- 2...

Supply of LED floodlight luminairewith pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycar...

Supplying, erecting, testing and commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A-C supply, with isolation transformer all accessories complete and Excluding batteries and w...

Supplying, installation, testing and commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 200AH capacity 32 mm dia 2.5 mm thick PWD SR 2023-2...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat-ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conne...