8262-SPECIAL REPAIRS TO BLDG NO.317A AT ATA AND ADDN/ALTN OF BLDG NO. 24 AND 26 (OFFR MD ACCN) AT OLL OF OTA CHENNAI UNDER GE STM

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard/dense soil.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out soft / loose soil for laying cables / pipes / erection of poles etc all as specified and as directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm in hard/dense soil.

Removing excavated materials to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point.

M&L for hardcore of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone or boulders.

M&L for PCC 1:4:8, type D2 (using 40 mm graded agg) as in foundation, filling and mass concrete.

M&L 75mm thick PCC 1:4:8, type D2 (using 40mm graded agg) as in sub base.

M&L sand filling under floors including spearding and levelling in layers n exc. 25 cm thick, watering and consolidation.

M&L for 40 mm thick PCC 1:2:4, type B0 (using 12.5 mm graded stone agg) for DPC to horizotal or vertical surfaces including necessary form work incl mixing of WPC as per manufacturer's instructions.

Dismantling plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings.

Demolition of unreinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and disposed off from site all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water etc.

M&L for glazed ceramic coloured joint free tiles in vertical surfaces 350 x 250 x 7mm/450x350x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement, incl cement screed 10 mm thick in CM 1:3 all as specified and directed.

M&L 25mm thick PCC 1:2:4, type B-1 ( using 20mm graded aggregate) as in leveling coarse.

M&L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15 mm thick screed bed in CM 1:4 complete all as directed.

M&L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15 mm thick screed bed in CM 1:4 complete all as directed.

All as per item No.16 above, but in vertical surfaces as in skirtings, incl screed bed 10 mm thick in CM 1:3 all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles.

Taking down chowkats or frames with shutters (without taking off shutters from frames) n exc. 1.5 Sqm including making good disturbed surfaces.

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc. 1.5 Sqm but n. exc 4 Sqm each including making good disturbed surfaces.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing.

S&F S&F Factory made PVC moulded door shutters 30mm thick made out of MS tubes of 19 gauge thickness and size 19mmx19mm for stiles and 15mmx15mm for top and bottom rails MS frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick termite proof water proof and fire resistant moulded PVC rigid foam sheet in different plain, The panel to be sealed with lipping of 10mm wide PVC sheet batten (Made by stacking 5 PVC rigid foam sheet of 5mm thickness and 25mm width) on the side opposite to where hinges are fitted etc complete as per manufacturers drg and specification.

S&F for Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints supplied and fixed.

S&F Second class hardwood 35 mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats.

S&F Second class hardwood 35mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., with sash bars, divided into squares edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to chowkats.

S&F Second class hardwood 30mm thick glazed and skeleton window/vent shutters, open rebated and prepared to receive glass, gauze etc., with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b) and supplied and fitted to chowkats all as specified.

M&L for preparing surfaces of wood and wood based materials of any description and treated with tar or coal tar black paint treating ends of posts backs of chowkats etc area tarred exc 0.1 sqm but n exc 0.5 sq m each.

M&L for preparing surfaces of wood and wood based materials of any description and treated with tar or coal tar black paint treating small articles such as stop covers gully gratings holdfasts ends of posts backs of chowkats etc area n exc 0.1 sqm each.

S&F Powder coated Anodised aluminium (minimum 15 micron) frame for doors, windows, ventilators and grills/guard bars etc with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F Powder coated Anodised Aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminum fittings such as roller, channel, locks/handle complete all as specified.

Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in cement mortar 1:4.

S&F 25mm dia aluminium coloured powder coated decorative fancy type curtain rods all as specified and as directed.

S&F aluminium coloured powder coated decorative fancy type end bracket and knob for 25mm curtain rods all as specified and as directed.

S&F MS work for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as directed.

M&L Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required for exc half brick but n.exc one brick thick walls.

S&F 100mm size of mild steel butt hinges, medium weight, cold rolled .

S&F 75mm size of mild steel butt hinges, medium weight, cold rolled .

S&F Alumininum anodised barrel tower bolts of extruded section 200 mm size.

S&F Alumininum anodised barrel tower bolts of extruded section 125 mm size.

S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm long.

S&F Extruded aluminium alloy handles, fabricated type, anodised 125 mm long.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed Length of bolt 300mm.

S&F cast iron door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F Sheet glass 4mm thick ordinary quality and glazing with 12mm square beading in squares n.exc 0.5 Sq.m in each pane.

M&L for preparing surfaces of new wood or wood based surfaces any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer.

M&L RCC nominal mix 1:2:4 type B-1 using 20mm graded aggregate as in slabs supported on walls, beams.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work incl sides of slab, n exc 200mm thick (Horizontal or sloping) for flat rough finished surfaces of concrete .

S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165.

M&L RCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, lintel bands, roof bands and other similar items including necessary form work all as specified.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire annealed, not less than 0.9mm dia or securing with clips.

All as per item No.44 above, but 6mm to 8mm dia.

All as per item No.44 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cement screed 15 mm thick in CM 1:4 all as directed.

M&L for Rounding to edges of granite/stone slabs one edge, such as in steps, cooking platform, and other similar situations.

S&F mild steel roof trusses (framed), trussed purlins, crane, gantries, rails and fastening and heavy bracket framing (beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc. conforming to Fe 410-0 (Gde E-250) quality 'A'.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall/valley gutter etc fixed with self tapping screws all as specified and directed.

S&F mild steel flat iron for wind tie including necessary drilling holes and fixing with necessary self drilling and self tapping screws/bolts and nuts, neoprene and limpet washers complete all as specified and directed.

M&L for preperation of new steel surfaces over 10 cm in width or girth and applying two coat of synthetic enamal paint over a coat of red oxide primer complete all as specified and as directed.

Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets.

S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including suspending wire all as specified.

M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions.

S&F sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and as directed.

S&F for 0.8mm thick stainless steel plate rack size 0.90 x 0.60 m fixed with steel screws complete

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F in repairs 15mm bore steel tubes medium grade galvanised with all fittings / fixtures concealed to walls and ceilings or laid in floors.

S&F in reparis 20mm bore steel tubes medium grade galvanised with all fittings / fixtures concealed to walls and ceilings or laid in floors.

S&F in repairs 25mm bore steel tubes medium grade galvanised with all fittings / fixtures concealed to walls and ceilings or laid in floors.

S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) all as directed.

S&F Plastic water closet seat, coloured, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device.

S&F PVC valveless, syphonic action type flushing cistern low level, 10 litre capacity with it’s complete accessories, fixed complete incl connection to water pipe and PVC 32 mm dia flush pipe etc.

S&F vitreous china wash hand basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug andporcelain stopper but including brackets,cutting for and pinning in ends of brackets or erecting of fixing of supply and waste pipe all as specified.

S&F Brass chromium plated 32 mm bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.

S&F PVC connection 15mm dia with PTMT nuts of length 450mm.

S&F low density 32mm dia bore polythene waste pipe (LDPE) of pressure rating 0.6 Kgf/Cm2.

S&F Pillar taps 15mm bore cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered hot' or 'cold' with long screwed shanks and fly nuts screwed for iron pipe .

Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out hard/dense soil.

M&L chequered Cement concrete tiles 30 cmx30cmx 25 mm thick set, jointed and pointed neat cement slurry in floor with grey cement and pigments, incl 20 mm thick screed bed in CM (1: 4) all as specified and directed by Engr-in-Charge.

M&L 75mm thick cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection & paving, finished even & smooth without using extra cement.

S&F in repairs 15mm Bib taps,chromium plated fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F CP Health faucet with CP connection and hook fixed all as directed. Make :Parry ware Cat No .T9937A1 or equivalent.

S&F Angle cock 15 mm bore chromium plated with long shank and cup (Concealed type) high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs.

S&F towel rack with lower hanger of stainless steel. Make Jaquar AHS-1581 H & equivalent.

S&F 3 in 1 wall mixer with provision of both hand shower and over head shower Make : Jaquar (Continental) Cat No : CON-281 KN or equivalent.

S&F stainless steel Soap Dish Make : Jaquar AHS-1531 or equivalent

S&F toilet paper holder brass chromium plated complete. (Make: Jaquar continental Cat No .ACN -1151N -or equivalent.)

S&F Corner glass Shelves (with brackets) for bath room, Make : Jaquar (Cat No-CAN-1173 or equivalent) .

S&F Brass chromium plated wash basin Mixer Make : Jaquar (Continental) Cat No CON-169KNB or equivalent.

M&L for 18/19 mm Pre laminated particle boards, Exterior grade, Pre laminated decorative choice one side & other side balancing white lamination fixed with screws to timber work for Cup Boards complete.

M&L for 6mm thick external teak wood lipping fixed to18/19mm thick particle boards with nails.

S&F continuous (piano) hinge mild steel, bright finish or electro galvanised width of flaps 40mm (when open) all as directed.

S&F 75 mm size extruded aluminium alloy handles, fabricated type, anodised.

S&F Aluminium anodised Hasp and staple, safety type of size 75mm.

S&F for PVC (SWR) gully traps 125/110mm, setting and jointing with solvent cement.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors/wall all as directed.

S&F PVC (SWR) bend 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall.

S&F PVC (SWR) bends 75 mm bore complete all as specified and as directed.

S&F PVC (SWR) floor trap plain 75 mm dia outlet with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110 mm.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required 110mm bore all as specified.

M&L cement concrete 1:4:8 type D-2 concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested, bore of pipe in 110mm.

M&L for cutting holes into or through brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete superficial area exc 150 Sq. cm but n.exc 400 Sq cm complete all as specified and directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove and filling with cement mortar 1:3 complete all as specified and directed.

Dismantling water tanks of 1000 ltr capacity and removing to store

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 ltrs capacity hoisted and fixed in position all as specified in SSR Part I

S&F 25 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule.

S&F in repairs 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe

M&L rendering 10mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even & smooth w/o using extra cement.

M&L for 15mm thick rendering in two layers of 10mm thick and 5mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even & smooth w/o using extra cement, using water proofing compound in top layer complete all as specified and as directed. (WPC shall be measured and paid separately as "Supply only".)

Supply only integral water proofing compound of approved quality complete all as specified.

Complete removal of exisisting treatment on walls and applying two coat of oil bound distemper over a coat of primer with 3mm thick wall putty all as specified and as directed.

M&L for Preparation of new plastered surfaces and applying two coat of oil bound distemper over a coat of primer with 3mm thick wall putty on internal surfaces of walls.

M&L for Preparation of new plastered surfaces and applying two coat of cement base paint over a coat of of alkali resistant priming paint on external surfaces of walls.

Complete removal of exisisting treatment on walls and applying two coat of cement base paint over a coat of of alkali resistant priming paint on external surfaces of walls..

Taking down carefully copper/ Aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc can be measured separately) removing the material from wall/ceiling etc, making good the disturbed surfaces and taken as credit all as directed.

Taking down carefully by unscrewing from boards/outlet boxes, wall ceiling fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, MCBs, MCB DBs, Metal clad sockets with plug, switch fuse and regulators etc., taken as credit and making good the disturbed surfaces of wall etc all as directed.

Material and Labour for Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor drawn through and including non-matallic rigid PVC conduit PVC conduit fittings and conduit asccessorries concealed in walls, roofs and floors etc., including Modular flush boxes and Modular cover plates for switches concealed in walls, roof and socket / electronics fan regulator / telphone socket, including provision of 1.5 sqmm PVC insulated unsheathed cable with multi stranded copper conductor as earth continmuity conductor and connecting to common earth dolly all as specified for one light/fan point controlled by one way switch complete including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting not exceeding 10 Cm girth all as specified and as directed.

One light point controlled by one switch.

One Ceiling fan point controlled by one switch and one regulator.

One Exhaust Fan point controlled by one Switch

One bell point controlled by bell push switch on independent board.

One 3 pin 5 amps switch socket on independent board.

One 3 pin 5 amps switch socket on same board along with other switches.

All as per item No.1 above but with 4 sqmm copper conductor cable with 2.5 sqmm PVC copper conductor cable as earth continuity conductor for one socket outlet 15/16 amps controlled by one switch 15/16 Amps on independent board all as specified and as directed.

M&L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 4 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping incl accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unsv all as specified and directed.

Supply and fix Wall mounted LED 20W Batten Basic all purpose surface and wall mounted LED batten with Aluminium housing & Integrated electronic driver all as specified and as directed.

Supply and fixing wall mounted LED batten,Extruded aluminium housing provided efficient heat disipation with polycarbonate diffuser with integrated electronic driver high efficacy.short circuit & voltage cut off protection, wide opearting voltage range of 140V to 270V wide, lumen output of 1050,10W including lamp with complete all as specified and as directed.

Supply and Fix Endura PEARL 30 W MP Bldg Sec lights New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP 66 roadway luminarie with high power LEDs as light source and electronic driver of Lamp type:30W LED 6000K all as specified and as directed.

Supply, Installation, testing and commissioning of Surface mounted LED luminaries with Mid flux LED using efficient optics , System lumen efficacy > 80Lumen/Watt , System Luminous flux of >=3200 lumens, System Wattage <=42W with 50,000 hours burning life. Color rendering index > 70 and Color temperature 5000K/6500K. CRCA housing with high efficiency opal diffuser. Luminaries sealed from bottom. Inbuilt gear . Zero maintenance, Zero mercury. Driver Surge protection > 1.5kV. Electronic In-Built PF > 0.9 , THD < 10% , IEC Compliant for Safety , Performance & EMI. Thesize shall be of 2'x2'.

S&F LED 35 W well glass luminaries equipped with new age technology which consume less energy without compromising the lighting level, highly durable, usable in rugged environment for Bldg Security. Including making suitable provision for mounting the fitting complete all as specified and as directed.

Supply and fix MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory including taking down Old DBs all as specified and directed. Make: C&S /Legrand/ ABB

Supply and fix MCCB four pole , 415 Volt, 100 Amps,16 KA , adjustable thermal & fixed magnetic setting including taking down Old MCCB complete all as specified and directed. Make:Havells /L&T/ Legrand/ ABB

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Supply and fix MCB Distribution board , 415 Volts Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB double door, sheet steel, enclosure powder coated with 250 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

S&F new wall fan of 400 mm sweep complete all as specified and directed. Make :Usha/Havells/Khaitan etc

Supply & Fix MCB TPN 415 volts, 63 amps Capacity all as directed.

Supply & Fix MCB SP 230 volts,40 amps 'C' Curve 10 kA Capacity including taking down Old MCB complete all as directed.

Supply & Fix MCB SPN 230 volts, 40 amps 'C' Curve 10 kA Capacity including taking down Old MCB complete all as directed.

Supply and replacement of metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 240 Volts 10 Amps all as specified and as directed.

S & F Ceiling rose surface bakelite 65mm x 50 mm two to three terminals all as directed.

S& F Lamp Holder PVC Poly corbonate with back plate suitable for batten fittings including 1x 11W LED Bulb all as specified and directed.

S & F Modular switch 1 way 6A, 1 module, 240 Volts complete all as specified and directed

S & F Modular switch 1 way 16A, 1 module, 240 Volts complete all as specified and directed

S & F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed

S & F Modular socket 6 A/ 16 A - 2/3 pin combined 2 module complete all as specified and directed

Supply and Fix Modular Bell push flush type 5 amps single pole 240 Volts all as directed. Make:Legrend or equivalent of Philips/ Siemens

Supply and Fix Bell AC, 230 volts, single pole all as direcetd. Make: Anchor

S & F Modular Fan step regulator, 100W - 1 module for ceiling Fan of 1200 mm sweep all as specified and as directed.

Taking down Old unservicable fan ,Supply & Fix in replacement of 1200 mm sweep ceiling fan BLDC rating, energy saving model with double ball bearing 230 volts 3 blades white in colour without regulator COMPLETE WITH CANOPY, suitable DOWN ROD all as directed.(Note: Old Unservicable Fan to deposited to MES Store)Make: Havells or equivalent in Bajaj/ CG/ Usha

Supply and Fix ventilating fan of size 250 mm sweep white in colour, plasitci body Type : Ventil air-DX WHT all as specified and as directed. Make: Havells or equivalent in Bajaj/ CG/ Usha

Supply & Fix in repairs unservicable fan ,Supply and fix in replacement of ventilating fan of size 250 mm sweep white in colour, plasitci body all as specified and as directed.(Note: Old Unservicable Fan to deposited to MES Store)Make: Havells or equivalent in Bajaj/ CG/ Usha

Taking down Old unservicable Geyser ,Supply and fix in replacement of Geyser ( Electric storage water heater), electric operated, AC, 230 Volts, 50Hz of capacity 25 litres,Vertical type Energy efficient 5 star rating of suitable storage tankcopper tank including incoming & out going PVC connection pipe of suitable lengh for Hot water and cold water, washers, On/Off thermostat control knob,Indication lights etc all as per IS specification complete all as specified and as directed.(Note: Old Unservicable Geyser to deposited to MES Store) Make:- Havells or in equivalent to list of manufaturers catered in PS

Taking down Old unservicable meter ,Supply and fix in replacement of Three phase Trivector DLMS complaince of accuracy class 1.0, 3 X 240v, 50 Hz , with backlit LCD Display of rating 10-60A(Measures & displays Triveter, V,I,kW,PF,Hz, Lastmonth history of kwh &MD in kw) with special features like TOD ,Tamper logging, optical communication port & display in absence of power including necessary electrical connection complete all as specified and directed.(Note: Old Unservicable Meter to deposited to MES Store) Make:HPL or equivalent as catered in PS

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out soft / loose soil for laying cables / pipes / erection of poles etc all as specified and as directed.

Supplying and laying burnt brick "B" class standard size for protection of cable as directed.

Supply, lay, spread in trenches river sand including spreading, levelling, punning for cushioning of cable all as directed.

Supply & Lay cable XLPE insulated screened PVC bedded, gaivanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor extruded PVC Type ST2 Outer sheathed, 1100V as per IS 7098(part-I) of following sizes all as specified and as directed

2 core 6 sqmm

3.5 core 35 sqmm

3.5 core 50 sqmm

Supply and fixing New generation, post-top, CORAL (Opal) - IP65,energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light sourceIsuitable connections complete all as specified and as directed. Make:Havells/ Philips/ CG

Supply and fix pole mounted Sheet Moulded Compound(SMC) Box weather proof type with hinged type door off white color of size 240x130x110 mm comprising of 1 No MCB 6A and 1 No neutral link complete fixed on pole with suitable clamps, bolts and nuts all as specified and as directed. Make: Sintex

M & L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 5 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoad dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed.

AM BUILDERS