Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.6 LAccepted-AOC P O P S THRIZINO WEST KAMENG A P PIN 790 002 | WEST KAMENG | ARUNACHAL PRADESH | 790002 | L1 | Accepted-AOC AOC DUE TO L1 BIDDER | |
| 2 | L2₹51.7 L+₹3.7 L (7.72%)Rejected-Finance | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹51.7 L+₹3.7 L (7.76%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹52.2 L+₹4.2 L (8.82%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹52.6 L+₹4.6 L (9.52%)Rejected-Finance BOMDILA WEST KAMENG ARUNACHAL PRADESH PIN 790 001 | BOMDILA | WEST KAMENG | ARUNACHAL PRADESH | 790001 | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
6 Sept 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MOHAN SINGH YADAV, IDSE
GE TENGA
PROVISION OF FRESH SHORTING OUT SHED LENGTH 20 FEET AND WIDTH 15 FEET AT 11 COMPO AND SPECIAL REPAIR TO COOK HOUSE OF DIV CAMP AT RUPA OF AGE B/R AND AGE E/M UNDER GE TENGA
2024_MES_667803_1
8627/E8
Open Tender
Civil Works
Item Rate
180 days
TENGA
PL REFER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹0
₹94,000
Yes
7 Oct 2024
25 Jul 2024
7 Sept 2024
25 Jul 2024
6 Sept 2024
8 Aug 2024
Amount
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil.
Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in hard/dense soil. complate all specified and directed
Returning/filling in including spreading, levelling, watering and well remming in layers n.exc 25 cm in hard/dense soil. complate all specified and directed
Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point.complate all specified and directed
M&L for cement concrete type D-2, 1:4:8 in Cement concrete in foundations, filling and mass concrete complate all specified and directed
M&L for cement concrete type D-2, 1:4:8 in Cement concrete in draft wall or Retaining wallsany thickness, filling and mass concrete complate all specified and directed
M&L for providing, cement concrete 1:2:4, type B-0,(12.5mm graded stone agg) in roof kerbs or mud stops, rounded or chamfered on edges.
M&L for providing precast reinforcement cement concrete type B1,1:2:4, (20mm graded agg) as in window or doors,cills, lintels,steps,coping etc.
M&L for Reinforced Cement Concrete Type B1, 1:2:4 (using 20 mm graded granite stone aggregate) for slabs suspended on walls, beams and columns, in floors, roofs, landings and in shelves and the like.
M&L for Reinforced cement concrete nominal mix type B0 1:2:4 using 12.5mm stone aggreggate for Columns, pillars, piers, posts and struts complete all specified and directed
M&L for Reinforced cement concrete nominal mix type B0 1:2:4 using 12.5mm stone aggreggate for chajjas complete all specified and directed
M&L for Reinforced cement concrete nominal mix type B0 1:2:4 using 12.5mm stone aggregate for Beams, cantilevers, bressumm ers, lintels over 1.5m complete all specified and directed
S&F of Formwork square or rectangular to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
S&F of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter
S&F of Formwork to chullah hoods, chajjas, troughs and similar items in?cluding edgecomplete all specified and direted
S&F of Formwork square or rectangular to sides of pillars, posts, struts, piers, columns and stanchions
M&L for fair finished flat formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping).
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds etc.
M&L TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips qual
M&L TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips qualit
M&L for PCC 100mm thick, type B-2, 1:2:4 (using 40mm graded sone agg) in sub-floors, sub-base, floors and pavings etc.complate all specified and directed
M&L for plain cement concrete 75mm thick type C-2, 1:3:6, (40mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement. complate all specified and directed
M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, using broken stone or boulders, watered and rammed to a true surface.
M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete.
M&L rendering 10mm thick in CM 1:6 on concrete inner surfaces finished even and smooth without using extra cement .
Material and labour for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer all as specified.
M&L rendering 15mm thick in CM 1:4 on concrete outer surfaces finished even and smooth without using extra cement complate all specified and directed
Material and labour for 15mm thick rendering in cement mortar (1:4) on brick or concrete surfaces in external painting with WPC.
M&L for Preparation of newly plastered wall surfaces and applying Two coats of cement base paint on external wall surfaces over one coat of primer
M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in sub base of floorings.
M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering with CM 1:6 on fair faces of brick work or concrete surfaces as in skirting all as specified.
M&L for Virified Ceramic tiles light Shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 Sqm, in vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM (1:4) on brick or concrete walls surfaces as backing coat complete all as specified and directed.
M&L rolled mild steel for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc, Fe- 290 (Gde E- 165).complate all specified and directed
M&L rolled mild steel for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe- 290 (Gde E- 165).complate all specified and directed
M&L for Preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of black japan paint over a coat of red oxide complete all specified and directed.
Dismantling of plain or corrugated steel sheeting any gauge, thickness as in roof covering complete all as specified and directed
Supply and fix, 0.63 mm thick corrugated galvanised mild steel sheeting (minimum 275gm/sqm galvanising) with two corrugations side lap, fixed with L type or J type or cranked hooks , bolts and washer in roof, complete, all as specified and directed.
Supply and fix plain galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing of 0.80mm thickness (minimum 275gm/sqm galvanising) complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified .
M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete
S&F 2nd class hard wood 30mm thick Glazed and skeleton shutters, divided into squared, with plain, chamfered or roun0ded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats
Supply and fix 125mm long MS butt hinge medium weight cold rolled in panelled doors and flush doors
S&F 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed.complate all specified and directed
Supply and fix aluminium anodized barrel tower bolt 150mm long extruded section. (Make : Crown or equivalent)
Supply and fix aluminium anodized barrel tower bolt 125mm long extruded section. (Make : Crown or equivalent)
S&F 100mm long aluminium anodized, barrel tower bolts extruded section. complate all specified and directed
S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised. handle fabricated type. complate all specified and directed
S&F Mild steel flat iron as in hold fasts, clamps,wall ties,bands,straps supports or stay for rain water etc complete all as specified.
S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane
S&F 3 mm thick frosted glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm in each pane.
Supply & fix sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed.
S&F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.
Demolition of cement concrete in floors n.exc 15 cm thick in ground floor (below or above ground level) and in any position all as specified
M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggragate as in subbase 40 mm thick complete all specified and directed by engr in charge.
M&L for Non - skid colour Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed of CM 1:4 complete all as specified and directed
M&L for Non - skid colour Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors of bathroom and Tolet etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed of CM 1:4 complete all as specified and directed
M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm screed bed with CM 1:6 in Kitchen platform complete all specified and directed
M&L for 100 mm thick PCC 1:4:8 type D-2, (using 40 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth without using extra cement all as specified
Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes with CM1:6.as specified and directed
M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15mm screed bed with CM 1:6 in Kitchen platform complete all specified and directed
M&L for polishing on existing granite/ Kota stone/ stone work where ever required in floor complete all specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises.
Material and labour for 350x 250x7mm or 450x350x7mm thick glazed ceramic tiles coloured set and jointed in neat cement slurry and pointed in coloured cement over 10mm thick rendering with CM 1:6 on fair faces of brick work or concrete surfaces as in dado of bathroom, toilet and kitchen all as specified.
M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick rendering with CM 1:6 on fair faces of brick work or concrete surfaces as in skirting all as specified.
S&F Glass dividing strips, 3 mm thick,38mm width and inserted in position to confirm to design.
S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) pipe, etc complete.
S & F in repairs 10 litres PVC, valve less, Syphonic action type, Flushing cistern low level,with flush pipe of polythylene of low or high density or PVC 32mm dia for low level cistern white with inlet ball valve float chain and pull and brackets complete.
S&F in Repairs of Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
S&F of in repair Waste coupling of 32mm dia PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms)suitable for urinals, (Minimum weight 32mm-45gms
Demoloition of Cement concrete (unreinforced) of any description and in any situation not otherwise specifically provided for .
Demolition and breaking up drain pipe of AC/PVC pipes 100mm dia.
S&F PVC (SWR) pipes single sockted 110mm dia in any length with rubber ring joints fixed to walls
S&F PVC (SWR) pipes single sockted 75mm dia in any length with rubber ring joints fixed to walls
S&F PVC (SWR) bends any radius, with access door 110mm dia.
S&F PVC (SWR) junction single, (single T) equal or unequal 110mm dia
S&F PVC (SWR) bends any radius, with access door 75mm dia.
S&F PVC SWR reducers of 75mm.
S&F PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement.
S&F in repair vitreous china wash hand basin white flat back of size 550mmx400mm including waste pipe, pipe chain and plug, CI brackets complete all as specified and directed.
S&F in Repairs 15mm bore CP pillar cock,fancy type screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes.
S&F in repairs15mm bore bib tap, chromium plated brass , fancy type with capstan head screwed down, screwed for iron pipe all as specified and directed.
S&F in Repairs15mm dia angle valve/stop valve chromium plated cast copper alloy fancy type screwed down high pressure with capstan head screwed both endsfor iron pipe or for union complete.
S&Fin Repairs Brass chromium plated shower rose 125mm size incl fixing to steel pipe or union all as specified and directed.
S&F of Towel Rail 600mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 190gms)
S&F Gun-metal 20mm bore globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.
-ditto- as per above item No. 88 but 15mm bore.
S&F LDPE pipes of pressure rating 6kgf/sq.cm 32mm bore size.
S&F Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) of 32mm dia bore.
S & F PVC connecting pipe 600 mm long with all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections.
Taking up or down 20 mm bore steel tubing and connections.
S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls or laid in trenches .
S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls or laid in trenches .
Refixing 15mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)
-Ditto- all as per item Srl No. 98 above but 20mm dia pipe.
S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets, curtain ring @ 7 nos/Rm and decorative end supports etc complete all as directed”
Taking down Chowkats or frames not exceeding 1.5 Sqm each (without taking off shutters from the frame).
Taking down Chowkats or frames exceeding 1.5 Sqm each but not exdeeding 4 Sqm each(without taking off shutters from the frame).
S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded
S&F for Steel ventilator with top hung shutter including hinges, steel peg stay, complete
M&L for Providing and fixing factory made uPVG white colour Sliding window Three track Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.
S&F of 35mm factory made Plain framed 2nd class hard wood , panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
S&F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides. One faces is covered with decorative face veneer with lipping/frame to match complete all specified and directed
S&F solid PVC door frame of size 50mmx47mm made out of 5mm with wood grain printed plain colour pvc sheet used instead Plain colour PVC sheet & edges will be painted to match with printed sheet, reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete.
S&F 30mm thick solid panel PVC door shutter consisting of frames made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour C channel having a PVC strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as the gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supply and fixing in the frame in the site as per specification and drawing.
M&L for Preparing surfaces of wood and wood based materials, back of chowkhats, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint area exc 0.1 sqm but n exc 0.5 sqm each.
M&L for preparation of new wooden surface of wood and wood based material of any description not otherwise describred over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer.
M&L for treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each with incl preparation new or old of any discreption or girth not otherwise discribed and treated with tar or coal tar black paint.
S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all specified and directed
Supply and fix 150mm size aluminium anodized handle fabricated type (Make :- Crown or equivalent)
S&F of Brass handles 75mm size, cast type for cup boars, polished bright complete all specified and directed
Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.
Dismantling boarding, any description, fixed in any position with nails,shelves,racks etc.
Taking down Shutters of any description exc 1 sqm and n exc 2 sqm each
S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) in 40mm complete all as specifird and directed.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished
M&L for 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work
Sypply & Fixed 15 mm thick 2nd class hard wood clean swan with butt joints in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work.
S&F 75mm size Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws
Dismantling wall and ceiling boards of any description including cover fillets complete all as specified and directed.
M & L for providing 4mm thick "E" Board in ceiling with galvanised iron snap frame of 'T' section 24 x 38 x 0.70 mm wall/ceiling angle 25x25x0.35mm thick and hanging with 4mm GI wire all fixed arrangement will be done as per manufacturer instruction incl two coat of oil bound distemper anirected.d one coat of white wash complete all as specified and
Dismantling structural steel work in cluding doors, gates but excluding framed truss etc.
M&L mild steel work as in gate framed work of angle or other section with gusset plates braces etc conforming to Fe 410W (Gde E-250) Quality A complete
Dismantling wrought iron or mild steel work of any description not otherwise provided for framing of roof truss
M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240
Dismantling timber scantlings 40 sq. cm in framed work and over in section, in cup boards
M&L 2nd class hard wood in scantling clean swan timber framed and fixed as directed.
Demolition of brick work or stone/ boulder masnory built in cement mortor
Taking down cement plaster on brick, concrete block wall or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth.
M&L for Preparing newly plastered surfaces of walls applying two coats of distemper oil emulsion over a coat of primer.
M&L for Preparing newly plastered surfaces of walls and applying three coats of white wash.
Supply only integral water proofing compound.
Material and labour for 10mm thick rendering in cement mortor(1:4) on concrete surfaces of ceiling, finished even and smooth W/O using extra cement.
M&L for Preparing newly plastered surfaces of ceiling and applying three coat of whitewash..
M&L for Preparing old plastered surfaces of ceiling and applying one coat of whitewash..
Complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of putty all as specified.
M&L for preparation of old painted wall surfaces and applying one coats of cement based paint complete all as specified.
M&L for preparation of old painted wall surfaces and applying one coats of Oil bound distemper complete all as specified.
M&L for preparation of old surface of wood and wood based materila over 10cm width or girth and applying one coat of synthetic enamel paint.
M&L for preparation of old steel painted Surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.
M&L for preparation of old painted steel Surfaces of any description n exc 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.
Dismantling of water tanks exc 500 ltrs & n exc 1000 ltrs capacity and removing to stores.
S & F poythene water storage tank of 1000 ltrs capacity rotational moulded (multilayered, cylindrical vertical with closed top) hoisted and fixed in position all as specified
S & F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe pf 20mm dia or brass ferrule and fixed all as specified and directed.
Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for.
M&L for PCC 1:3:6 type C-2 using 40mm graded aggregates as in surface channels and drains..
Demolition of 100mm SWG drain pipe and material and labour for PVC (SWR) pipes of 110mm single socketed in any length with rubber ring joint , laid in trenches or in floors.
M&L for PCC 1:3:6 type C-2, Concrete bed to drain pipes including packing under, and haunching against the sides of pipes bore 110mm on after they are laid and tested complete all as specified.
Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (HRFR)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.
All as per item No. 154 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size
All as per item No. 154 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed.
All as per item No. 154 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 4 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified.
S&F Socket outlet 2 in 1, 5 pin, 5 amp flush type
S&F Socket outlet 2 in 1, 5 pin, 5 and 15 amp flush type
Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed.
Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.
Supply and fixing lamp holder, insulatted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed.
S&F LED lamp 9/10 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min).
S&F LED light fitting 1x 20 Watt AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed
S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed.
Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 8 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.
Supply and fix sheet metal enclosures for DBs double door , 4 way when MCBs to be used 230 volts single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.
S&F MCB SPN having braking capacity 10KA, 32 Amps, C Curve 240 V complete all as specified and directed.
S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, C Curve 240 V complete all as specified and directed.
S&F of 1100 Volts grade heavy duty ISI marked cable PVC insulated multi stranded aluminium conductor one twin core cable flat or circular of size 16 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections , of size 10 Sqmm 2 core.
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.
Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc)
Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC.
Taking down service wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC.
Sikha Traders (BID ID -3088250)
M/S ASHOK CONSTRUCTION (BID ID -3088264)
M/S RARAI ENTERPRISES (BID ID -3088301)
M/S R N ENTERPRISES (BID ID -3088288)
M/S Karkies Construction & Co. (BID ID -3088307)
MS SANGRILA SYNDICATE (BID ID -3088319)
M/S MURPHEW ENTERPRISES (BID ID -3088282)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .