Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
₹48.9 L
EMD Value
₹98,000
Closing Date
18 Jul 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DY. GENERAL MANAGER
Office of the Deputy General Manager, JKPCC Ltd., Unit Jammu.
Balance Work for Construction of Tehsil Office Bhalwal Jammu.
2022_PWDJK_176343_1
e-NIT NO. 13/JAMMU of 2022-23 Dt. 25-06-2022.
Open Tender
Civil Works
Item Rate
120 days
JAMMU
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,000
Yes
Financial Controller, JKPCC Ltd.
₹98,000
Yes
20 Jul 2022
27 Jun 2022
19 Jul 2022
27 Jun 2022
18 Jul 2022
27 Jun 2022
90 days
Amount
Civil Works
Earth work in excavation by manual means in foundation exceeding 1.5mtr in width or 10 sqm on plan including dressing of sides and ramming of bottoms, lift upto 1.5mtr including getting out excavated soil and disposal of surplus soil as directed, within a lead of 50 mtr. All kinds of soils
All kind of soils
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2.9.1 All kinds of soil :
Disposal of soil (excavated soil by mechanical transport beyond 15mm lead) with 4Km
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
a) 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
b) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.
Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm
Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels
Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
Providing and fixing Anodized aluminum grill (Anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing windows frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved Anodized aluminum standard section around the opening, all complete as epr requirement and direction of Engineer-in-charge. (only weight of grill to be measured for payment)
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal Wood
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Single rubber stopper
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick
PLUMBING WORK
Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied W.C. pan with lSI marked white solid plastic seat and lid.
Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China wash basin size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers.
Providing and fixing PTMT waste coupling for wash basin and sink Waste coupling 31mm of 79mm length and 62mm bredth weighing not less than 45gm.
Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete.Flexible pipe 32 mm dia
Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fitting sand brackets, cutting and making good the walls wherever required 510x1040mm bowl depth 250mm. (For Blocks -1 &2)
Providing and fixing of C.P Grating of required size (100mm)
Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard Rectangular shape 453x357 mm
Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete
Providing and fixing toilet paper holder C.P. brass
Providing and fixing on wall face unpplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap of thermal expansion.
160 mm dia
110 mm dia
75 mm dia
Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion.
Coupler
160 mm dia
110 mm dia
75 mm dia
Single tee with door
Single tee without door
160 mm bend
110 mm bend
75 mm bend
Shoe (Plain)
160mm Shoe
100mm Shoe
75mm Shoe
Providing and fixing P/S/F trap of required angles of self cleaning design with screwed down or hinged grating with or with or without vent arm complete, including cost of cutting and making good the walls and floors:
110mm inlet and 100mm Floor trap of make Supreme, finolex or equivalent
110mm inlet and 75mm Floor trap of make Supreme, finolex or equivalent
110mm inlet and 100mm P trap of make Supreme, finolex or equivalent
Cutting chases in brick masonry walls for following diameter PVC pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 12.5mm nominal size) 1:4 ( 1 cement: 4 coarse sand)
100mm dia.
75mm dia.
Providing and fixing M.S. stays and clamps for PVC pipes of diameter.
100mm dia.
75mm dia.
Providing and fixing Soap dish (C.P. brass) with bracket (PTMT)
Providing and fixing towel ring (C.P. brass) (PTMT)
Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.:
15 mm dia. nominal bore (medium)
20 mm dia. nominal bore (medium)
25 mm dia. nominal bore (medium)
Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work)
25 mm dia. nominal bore
40 mm dia. nominal bore
Making connection of G.l. distribution branch with G.l. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete
25 to 40 mm nominal bore
Providing & fixing Brass gate ball valve of approved quality conforming to IS : 8931 of 15mm nominal bore
Providing & fixing Brass gate ball valve of approved quality conforming to IS : 8931 of 20mm nominal bore
Providing & fixing Brass gate ball valve of approved quality conforming to IS : 8931 of 25mm nominal bore
Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm nominal bore
Providing and fixing C.P. Jet with connection pipe
Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 15 mm nominal bore
Providing and fixing C.P. brass close hole basin mixer centre hole of approved quality and make, weighing not less than 1.970 kg 15 mm nominal bore of standard back type.
Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore
Providing and fixing G.l. Union in G.l. pipe including cutting and threading the pipe and making long screws etc. complete (new work)
15 mm nominal bore
20 mm nominal bore
25 mm nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].
Constructing brick masonry chamber for underground C.l. ,inspection chamber and bend with 75 class designation bricks in cement mortar 1:5 ( 1 cement: 5 fine sand) C. I. cover with frame (light duty) 455x6.1 0 mm internal dimensions, total weight of cover with fram.. e to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:2:4 mix ( 1 cement : 2coarse sand : 4 stone aggregate 40 mm nominal size),foundatior concrete 1:5:10 (1 cement: 5 fine sand: 10 graded f'tone aggregate 40mn nominal size), inside plastering 12 mm thlck with Gernent mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of;neat cement on walls and bed concrete etc. complete as per standard design :
Inside dimensions 455x600x1 0 mm and 45 cm deep for single pipe line with common burnt clay bricks.
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 em in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G. I. pipe etc.
Providing & Laying in position cement concrete 1:3:6 in stone aggregate 20mm excluding the cost of centering and shuttering . all works upto plinth level.(stone crushed aggregate)
Providing & Laying in position cement concrete 1:4:8 in stone aggregate 40mm excluding the cost of centering and shuttering all works upto plinth level.
Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings and bases of columns etc. for mass concrete
Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement: 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba.
Providing installation and testing of geysor of approved quality and manufacture venus/Bajaj or equilant all complete
35 litre capacity
Making soak pit 2.5 m diameter 3.0 metre deep with 45x45 em dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
Providing and fixing unplasticised - PVC pipe clips / M.S U Clumps of approved design to unplasticised - PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs, screwed with M.S screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete (110mm dia).
Note:- i) including cost of all leads, lifts; & Carriage of material by Mechanical transport Complete.
M/S DESIGN INFRATECH
JAS EXCAVATORS
NIRMAL SINGH
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .