REPAIRS TO BOUNDARY WALL, HARD STANDING, FENCING PATH, CULVERT, DRAINAGE FOR DEPOT AREA UNDER AGE B/R-I OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A'

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and directed.

Dismantling fencing wire mesh any type all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down cement plaster on brick or stone walls, ceiling/roof etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site etc complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in natural ground and making good disturbed ground complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified and directed.

M&L for Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Fly ash brick work with old size bricks, straight or curved on plan to any radius half brick thick built in In cement mortar 1:4 complete all as specified and directed.

M&L Reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

Use & Waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Ditto all as per item No. 24.00 here-in-before but 8 mm dia

Ditto all as per item No. 24.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

M&L for Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in surface channels and drains including formwork complete all as specified and directed.

S&F MS angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and as directed.

S&F mild steel flats 40x6mm including cutting and drilling for securing chain link to fencing posts etc complete all as specified.

M&L for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed (each line wire to be measured)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

Supply only Chain link MS galvaised fencing, any size or type all as directed.

S&Fmild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with hexagonal or square washers and one nut not exc 5cm long 10mm dia neck, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work and rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

M & L for 20 mm thick rendering in CM (1:4) on fair faces of brick work with WPC @ 3% by weight of cement or as per manufacturer instruction finished even and fair without using extra cement (WPC will be measured and paid separately)

Supply only integral water proofing compound (ISI marked) of approved brand.

M&L for preparation of plastered new surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of white wash etc all as directed and specified.

M&L for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on newly untreated steel surfaces of any description, over 10cm in width or girth,not otherwise described including preparation of surfaces complete all as specified and directed.

Excavation in post holes each n.exc. 0.50 cum getting out, returing filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance n. exc 50m and making good surface in hard/dense soil etc complete all as specified.

Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site all as specified and directed

M&L for PCC 100mm thick 1:2:4 type B2 using 40mm graded stone aggts as in floor, path, hardstanding etc laid in panels complete all as specified and directed.

M&L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and as directed

M&L for forming Grade 'A' Contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound.

M&L for forming Grade 'A' Construction joint 30mm deep x 10mm wide filled with sealing compound

M&L for PCC 75mm thick 1:4:8 type D2 using 40mm graded crushed stone aggregate as in floor,path dtc finishing the surface rough to receive tilies.

M&L for pre polished coloured cement concrete chequred tile of approved quality size 300X300X 25mm thick on floors over and including 20 mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed.

M&L for providing Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L 25mm thick sand cushioning under floor including levelling all as specified and directed.

M&L for PCC 1:2:4 Type B1 (using 20mm graded crushed stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for Precast RCC 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in manhole cover/septic/soak pit and similar works including necessary form work set in cement mortar 1:4 complete all as specified and directed.

M&L for RCC 1:1.5:3 type B1 (using 20mm graded crushed stone aggregates) as in roof slab supported on walls, beams, sloping type RCC Slab for septic tank etc complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landinqs and similar work; not exceeding 200 mm thick (Horizontal or sloping for flat) complete all as specified and directed.

Demolition / breaking up damaged SGSW pipe of any position of internal dia of pipe 100 mm including demolition of PCC, and removing dismantled material at a distance n exc 50 m all as directed.

Demolition / breaking up damaged SGSW pipe of any position of internal dia of pipe 150 mm including demolition of PCC, and removing dismantled material at a distance n exc 50 m all as directed.

M&L for concrete bed PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate to SWG drain pipe 100mm bore including packing under and haunching against the sides of pipes after they are laid and tested including removal of debris outside MD land all as specified and directed.

M&L for concrete bed PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregateto SWG drain pipe 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested including removal of debris outside MD land all as specified and directed.

M&L for salt glazed stone ware drain pipe grade A 150mm bore laid on concrete bed and jointed complete all as specified and directed.

M&L for salt glazed stone ware drain pipe grade A 100mm bore laid on concrete bed and jointed complete all as specified and directed.

Taking down 100mm CI soil water mains gutters pipes of any length any size including burning out joints and and cutting of holes where ever required all as directed.

S&F 100mm dia CI sand cast iron pipe jointed with cement joint and fixed to walls including cutting of holes wherever required complete all as specified and directed.

Taking out cracked AC soil waste or vent pipe 100 mm of any descriptionand removing material from site all as directed.

S&F of asbestos cement pipes in any length 100 mm dia bore fixed with cement joints complete all as specified and directed.

Cutting into existing manhole for connecting new drain pipe of 100 mm bore and making good to pipe and rendering disturbed surface where drain pipe have been insereted cutting out existing benching for forming branch channel (1/2 round or 3/4 section as required) in cement concrete 1:2:4 type B1 and finished the surface even and smooth and reforming benching as required and directed.

Cutting into existing manhole for connecting new drain pipe of 150 mm bore and making good to pipe and rendering disturbed surface where drain pipe have been insereted cutting out existing benching for forming branch channel (1/2 round or 3/4 section as required) in cement concrete 1:2:4 type B1 and finished the surface even and smooth and reforming benching as required and directed.

Taking out unserviceable CI branch pieces single or double of any description and removing material from site all as directed.

Taking out unserviceable AC/CI bends of any size and removing the demolished material from site where directed.

S&F cast iron bend (Sand cast) of any radius with or without oval access door including jointing with cement joints for (100 mm bore) complete all as specified and directed.

S&F cast iron bend (Sand cast) of any radius with with oval access door including jointing with cement joints for (100 mm bore) complete all as specified and directed.

S&F Asbestos cement bend of any radius including pointing with cement mortar for (100 mm bore) complete all as specified and directed.

S&F 100 mm cast iron branch piece (sand cast) single (equal or unequal) ordianary or inverted spigot or socket type or with parallaled branches and fitted with or without oval access door and fixed to soil pipe in cement joints 1:2 complete all as specified and directed.

S&F salt glazed stone ware gully trap of size 150 x 150 mm to existing pipe line set in PCC 1:3:6 type C2 and jointed in cement mortar (1: 1) in repairs complete all as specified and directed.

S&F cast iron cowl 75mm bore complete all as specified and directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 2,13,650.00 (refer Tender Srl Page No 26). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

UNIVERSAL CONSTRUCTION

M/S UTTAM ENTERPRISES

BISWAJIT SAHA

M/S G D CONSTRUCTION

AMULYA KUMAR ROY

SHRI S K BHATTACHARJEE

MUKHERJEE ENTERPRISE