Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹42.6 L+₹91 (<0.01%)Rejected-Finance H NO 209 D SHRI SHIVA NAGAR IV MANCHARA SIKAR ROAD JAIPUR | JAIPUR | JAIPUR | RAJASTHAN | 302013 | L2 | Rejected-Finance Other Than First Lowest | |
| 3 | L3₹44.3 L+₹1.7 L (3.95%)Rejected-Finance | L3 | Rejected-Finance Other Than First Lowest |
Tender Value
Refer Docs
EMD Value
₹94,600
Closing Date
28 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jaipur
GE Jaipur
ADDN/ALTN OF BLDG NO. P-2A, 5H AND MEDICAL STORE (BLDG NO P-10) OF MH, ADDN/ALTN IN REAR CORRIDOR OF MH UNDER ZONE-II AREA ATJAIPUR MIL STN
2023_MES_630529_1
GE/J-56/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE Jaipur
AS PER TENDER DOCUMENT
5 documents required · 5 mandatory
₹500
GE Jaipur
₹94,600
Yes
29 Feb 2024
30 Nov 2023
30 Dec 2023
30 Nov 2023
28 Dec 2023
15 Dec 2023
Amount
B/R Portion M&L for surface dressing not exc 15 cm deep in soft/loose soil complete all as specified and as directed.
M & L Hardcore of broken bricks of gauge n. exc 63mm, deposited spread and leveled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed.
M&L for 100mm thick plain cement concrete (1:4:8), type D-2 (using 40mm graded stone aggregate) as in sub base finished even and fair complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M&L machine pressed precast concrete interlocking coloured rubber moulded paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement and pigment laid over 25mm thick sand cushion complete all as specified and directed. Note : Sand for cushioning shall be measured and paid seperately.
M&L for providing precast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) block masonary with solid blocks, exc 10cm in width and setting in cement mortar 1:4 complete all as specified and as directed.
Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil complete all as specified and as directed.
M&L PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete complete all as specified and directed.
S&F rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to Fe 410-W(Gde E-250) Quilaty A complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strenght of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/J hook, L-type crancked hook complete all as specified and directed.
M&L preparation of new steel or iron surface of any description n. exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.
Excavation in trenches n.exc 1.5 mt wide and n.exc 1.5 m in depth, for foundation etc or for shafts, wells, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in Soft/loose soil complete all as specified and directed.
M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified & directed.
M&L for brick work with sub-class 'B' bricks (ols size), straight or curved on plan exc 6m mean radius built in In cement mortar 1:4 complete all as specified and directed
Taking down cement plaster on brick or stone walls incl. raking out joints hacking for key scrubbing down with water complete all as specified and directed
M&L for rendering 15mm thick cement plaster on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth w/o using extra cement complete all as specified and as directed by Engineer-in-Charge.
M&L rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces in two layers, first layer 10mm thick and top layer 5mm thick mixed with integral water proofing compound @2% by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement including necessary scaffolding arrangements up to any height complete all as specified and as directed. Note : WPC Shall be measured and paid seperately
Supply only integral water proofing compund complete all as specified and directed.
M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over and incl a coat of primer over and incl a coat of wall care putty of 3mm thick (avg thickness) applied in two coats including rubbing with suitable sand paper complete all as specified.
M&L for preparing new plasterd surfaces of wall applying cement based wall care putty of approved make 1mm thick (average thickness) uniformly where ever required and applying two coats of weather proofing exterior acrylic emulsion paint (applied @ 1.67 litre/10sqm ) of DULUX Weather shield Max or APEX ULTIMA or equivlent as approved by GE complete all as specified and directed.
S&F powder coated anodised aluminium section (minimum thickness of powder coating 50 micron) for doors /windows / ventilators, door partitions including fabrication of frame and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc incl all accessories such as glazing clips, rubber beading for fixing glass panes in frame complete all as specified and directed. Notes : (i) Glass panes will be measured and paid seperately (ii) The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and paid seperately.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, fixed / sliding type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, locks, anodised alumnium snap beading, screws etc. complete all as specified and directed.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed / sliding type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, locks, anodised alumnium snap beading, screws etc. complete all as specified and directed.
S&F 5.5 mm thick antilo sheet glass frosted on one side, ordinary quality and glazing with aluminium beads and rubber gasket in square exceeding 0.5 sqm each pane complete all as specified and directed.
M&L 12mm thik Medium density fibre board, exterior grade, both side choice lamination fixed in aluminium doors/partition with screws complete all as specified and directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as specified and directed.
M & L for glazed coloured joint free ceramic tiles 300x600mm, 9-10 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat on in CM 1:4 complete all as specified and directed
M&L Non skid coloured joint free ceramic tiles 7mm to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor set and jointed in neat cement slurry and pointed in coloured cement match the shade of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed
S&F in repair water storage tanks 500 litres capacity, rotational moulded, double layer polythene (cylindrical vertical with closed top) hoisting and fixed in position on roofs all as specified in SSR Part-I incl dismantling old one and removing complete all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge.
M & L machine cut kota stone slab flooring 20-25mm thick over and including cement screed bed 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge.
M&L machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed incl backing coat 10 mm thick on fair faces of brick work in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge.
M&L for Providing and fixing suspended false ceiling extra microperforation size of 600 x 600 x 12 mm Ceiling Tiles over suspension metal system (MICRO LOOK) designer grid (15 mm grid 8mm return) SILHOUETTE X L 15 MM (NOMINAL) of Armstorng make complete or equivalent brand of make specified in x `C' to particular specifications including necessary hanging system arrangement which is required to be made from existing RCC roof /stone /slab /ac sheet of existing ceiling complete all as specified and directed.
M&L complete removal of existing treatment of old plastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted and over and incl wall care putty complete all as specified and as directed by Engineer-in-Charge.
M&L for Complete removal exising old surfaces of wall / ceiling by scrubbing with mechanical means scraping down smoke root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water and applying cement based wall care putty of approved make 1mm thick (average thickness) uniformly whereever required and applying two coats of weather proofing exterior acrylic emulsion paint of DULUXWeather shield Max or APEX ULTIMA or equivlent as approved by GE complete all as specified and directed.
S&F in repairs 19/20mm thick exterior grade prelaminated particle board(Prelaminated on one side) as in CB shutter, pelmet including 6mm thick teak wood leaping and necessary rebating for double shutter where required including polishing to leaping complete all as specified.
S&F Cupboards knobs 40 mm dia of brass polished complete all as specified.
Supply & fix 125 mm hasp and staples, safty type aluminium anodised with MS hinges pin incl bolt to hing plate and fixed with screw complete all as specified and directed.
S&F continuous piano hinges mild steel bright finish or electro galvanised width of flap 30mm complete all as specified and directed by Engr-In-Charge
Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) not exc 1.50 Sqm each complete all as specified and directed.
Taking down shutters of any description of area exc 1 sqm but n exc 2sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.50 sqm and n.exc 4.00 sqm each complete all as specified and directed.
Supply & fix in repairs stainless steel curtain rod powder coated with fixing side brackets, end cups, and fixed with PVC rawl plugs & steel screws complete all as specified and directed.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F 150mm size mild steel pressed handle, oval type, stove enameled black and fixed with steel screws complete all as specified and directed.
S&F 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
Supply & fix 150 mm length aluminium anodised barrel tower bolt extruded section complete all as specified and directed.
M&L for preparing old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S & F in repair 15mm bore GI tubing medium grade with all fitting fixed to wall or concealed or fitted to ceiling or laid under floor incl taking down old one complete all as specified and directed.
S & F in repair 20mm bore GI tubing medium grade with all fitting fixed to wall or concealed or fitted to ceiling or laid under floor incl taking down old one complete all as specified and directed.
S&F in repair tubular towel rail 20mm dia 600mm long of brass, chromium plated fixed with brackets and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S &F in repairs Wash hand basin, white flat back size 550X400 mm including cutting for and pinning in ends of brackets and including 32 mm dia waste coupling of PTMT (min weight 45 gms), 32mm dia PVC waste pipe 75 cms long with necessary fixing arrangement complete all as specified and directed.
S&F in repair Vitreous China, wash down water closet pan (pedestal pattern) white in colour with and including plastic seat cover white closed pattern with flat bottom and cover and MS chromium palted hinging device including connecton to outgoing pipe, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.
S&F PVC valveless, syphonic action type, flushing cistern, low level or high level 10 ltr capacity, white, with intel, ball valve, float and handle including brackets, flushing pipe complete all as specified & directed.
S&F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.
S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.
S&F in repair 75mm dia PVC (SWR) outlet nahani trap/floor trap with grating including jointing with solvent cement complete all as specified and as directed.
S & F in repair PVC grating doom 125 mm dia with waste hole of PTMT (Min Weight 40 gms) complete all as specified and as directed.
S&F in repairs fancy type CP Health faucet 15 mm bore (ISI marked) including extension Pipe of 1 Mtr Long complete all as specified and as directed.
Supply & fix in repairs 20 mm bore stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed for iron pipe or for union fixed complete all as specified and as directed.
Supply & fix as in repairs 15mm bore cast copper alloy CP bib tap fancy type screwed down for iron pipes or for unions complete all as specified and as directed.
Supply & fix as in repairs of 15mm bore cast copper alloy CP stop cock /angle cock fancy type screwed down with iron pipe or for union fixed complete all as specified and as directed.
Supply & fix in repairs 15mm bore CP brass mixer for mixing hot & cold water complete with nipple and arms complete all as specified.
Supply & fix in repairs 15mm bore CP pillar tap with capstan head screwed down high pressure with or without 'Hot' or ' Cold' with long screwed shank and fly nuts screwed for iron pipe fancy type complete all as specified and as directed.
Supply & fix as in repairs 15mm bore cast copper alloy CP stop valves chromium plated with long shank and cup fancy type(concealed type) screwed down with iron pipe or for union fixed complete all as specified and as directed.
Supply & fix in repair cast copper alloy chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and as directed.
S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F 110mm dia uPVC (SWR) pipes, single socketed in length with rubber ring joints, type-A fixed to wall or in floors with and incl suitable SS clamp complete all as specified and as directed.
S&F 75mm dia uPVC (SWR) pipes, single socketed in length with rubber ring joints type-A, fixed to wall or in floors with and incl suitable SS clamp complete all as specified and as directed.
S&F 75mm bore uPVC (SWR) bends type-A any radius with oval access doors complete all as specified and directed.
S&F 110mm bore uPVC (SWR) bends type-A, any radius with oval access doors complete all as specified and directed.
S&F 110mm bore uPVC(SWR) branch piece, single y equal or unequal with access door complete all as specified and directed.
S&F 110mm bore uPVC(SWR) reducers complete all as specified and directed.
Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced complete all as specified and directed.
M&L 75mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregates) as in plinth protections, finished even and fair with joints 10 mm wide and in full depth at corners and @ 3m c/c filled with mastic mortar including necessary formwork complete all as specified and directed.
M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W (Gde- E- 250) qualty A complete all as specified and directed. Note:- Cost of welding butt hinges to the door frame deemed to included in quoted rate
Taking down existing treatment complete including PCC and properly clean the surface to remove loose particles with wire brushes and removing the debris out side of MoD Land complete all as specified and directed by Engr-In-Charge
M&L cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed by Engr-In-Charge
M&L for screed/plaster 15mm thick in (CM 1:4) on roof surfaces mixed with approved water proofing compound as per manufacture instuctions complete all as specified and directed by Engr-In-Charge Note : WPC shall be measured and paid seperately.
M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-1, (1:2:4) using 20 mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop complete all as specified and directed
The surface shall be painted with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS: 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions. and finally applying one coat of bitumen @ 1.2 kg/sqm on APP membrane including two coats of aluminium paint complete all as specified and directed by Engr-in-Charge. Note : The work shall be carried out by authorised applicator
M&L for rendering 15mm thick cement plaster onstone masonary surfaces or surface other than fair faces of brick work in cement mortar 1:6 finished even and smooth w/o using extra cement complete all as specified and as directed by Engineer-in-Charge.
M&L rendering 15mm thick cement plaster on stone massonary or other than fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth w/o using extra cement complete all as specified and as directed by Engineer-in-Charge.
M&L for rendering 10mm thick on fair faces of conc. surfaces of ceiling in cement mortar 1:3 finished even and smooth w/o using extra cement as on ceiling surface as per directed by Engr-In-Charge
S&F Steel windows with side hung shutters factory made including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded incl inserting the holdfast in stone masonay and make good the distrubed masonary complete all as specified and directed.
S&F Steel windows with side hung shutters factory made including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded incl inserting the holdfast in stone masonay and make good the distrubed masonary complete all as specified and directed.
Returning, filling including spreading leveling watering and well ramming in layers n. exc 25 cm in soft/loose soil complete all as directed.
Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as directed.
M&L for 150mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in flooring complete all as specified and directed by Engineer-in-Charge.
M & L 100 mm thick plain Cement Concrete 1:2:4 type B-0 (using 12.5mm graded aggregate) in floor, finish the surfaces even and smooth without using extra cement including necessary form work complete all as specified and directed.
Supply and laying DWC pipes (Double wall corrugated) of class SN-4, IS-16098 (Part-II) of size internal dia of 150 mm, laid in trenches and jointed complete with coupler,bends,tee, reducers etc complete all as specified & directed.
M&L for 20mm thick granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and rounding the edges complete incl screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes etc complete all as specified and directed.
Demolition of old unserviceable soak well and M&L for construction of new soak well 2.40 metre internal dia and over all depth of 4.50 m including necessary excavation and earth work in any type of soil, PCC 1:4:8 type D-2 using 40mm graded stone aggregate and RCC 1:2:4 type B-1 complete all as specified and shown on drg no CEJZ/2004/TD/S-35 sheet 1/1 dated 11 May 2004
S&F stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 25 mm bore or union and fixed
Supply & fix 20mm bore ball valve high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. Note : min wt 210gms.
M & L for preparation of new surface walls, pillars and cornices and applying two coat of Colour washing all as specified and directed
S&F Factory made 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.
S&F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003. The shutter shall be fitted to chowkhats as directed by Engineer-in-Charge.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified .
Supply & fix 100 mm size butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed.
S&F mild steel pressed handle, oval type, 150 mm size, stove enameled black and fixed with steel screws, complete all as specified.
M& L 100mm mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed.
S&F 250mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
M&L for preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of old wooden or wood based surfaces of any description, over 10cm width or girth and applying a coat of synthetic enamel paint complete all as specified and directed.
S& F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.5 sqm in each pane incl haking out old broken glass complete all as specified and directed.
E/M Portion Taking down carefully surface aluminum /copper point wiring, casing capping /PVC concealed conduit for (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and directed.
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 1.5 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3 mm thick phenoic laminated white sheet cover for mounting switches, scokets, fan regulators as required for one light point controlled by one switch complete all as specified and as directed
,---ditto--- all as per item No. 112 above but for one fan point controlled by one switch and regulator complete all as specified and as directed
,---ditto--- all as per item No. 112 above but for one socket outlet 6 amp controlled by one switch on the same board with other switches complete all as specified and directed.
,---ditto--- all as per item No. 112 above but for one socket outlet 6 amp controlled by one switch on indepdendent board complete all as specified and directed.
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 4.0 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3 mm thick phenoic laminated white sheet cover for mounting switches, sockets as required for one 3 pin 16 Amps socket outlet point controlled by one switch on independent board complete all as specified and as directed
S&F socket outlet, 2-in-1, 3 pin 6 Amps flush type complete all as specified and directed.
S&F switch piano flush button single pole one way 6 Amp complete all as specified and as directed
S&F switch piano flush button single pole one way 16 Amp complete all as specified and directed.
S&F socket outlet, 2-in-1, 3 pin 6 & 16 Amps flush type complete all as specified and directed.
S&F ceiling rose 3 plates polycarbonate body complete all as specified and as directed
S&F hum free electronic step fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete all as specified and directed.
S&F in repair MCBs Distribution board SPN, 8 ways powder coated, CRCA steel sheet, IP-43, IK09, with reversible double door, 415V, recess mounted having insulated 100 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.
S&F MCBs of 'B' curve single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.
S&F MCBs of 'B' curve double pole 10 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.
S&F MCBs of 'B' curve double pole 40 to 63 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.
S&F LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 105 lumen per watt and total power consumption not more than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. Make - Philips Cat ref No. ENDURALED BATTEN "BN 308C LED20S PSU CDL WH, Bajaj cat ref No. BLTRU 20W WH VIVA or Havells Cat No. 600BS20WLED840SPCWH as approved by GE.
Supply and fixing in repairs energy efficient recessed mounted LED luminaire suitable for 2'x2' grid ceiling with full glow fully diffused diffuser and lumen output of 3600 lumens having constant current electronic driver of 36 watt duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable complete all as specified and directed.
S&F lamp holder PVC/ polycarbonate body with back plate complete all as specified and directed.
S&F in repair LED bulk head light fitting 9/10 watt IP 66 & IK 09 with polycarbonate body with LED driver duly prewired connection with 0.75sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable complete all as specified & directed.
Supply and fixing in repairs green line high efficiecy LED light 35 watt complete with driver, pressure die cast aliminium housing, UV stabilised polycarbonate covers, IP 65 protection including mounting bracket made of 25 mm GI pipe, medium grade, ISI marked not less than 1.2m bend in shape with 2 no. clamps, nuts, bolts, washers as required complete all as specified and required.
M&L for sub main wiring with two run of 6 Sqmm PVC insulated FRLS multistranded copper conductor cable alongwith one run of 6 Sqmm earth wire as earth continuity conductor (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non mettalic PVC conduit of size 25mm, medium grade, ISI marked ivory colour alongwith accessories of suitable size including making connection as required and making good the disturbed portion complete all as specified and directed. NOTE - Two run of 6 sqmm phase and neutral wire & One run of 6 sqmm earth wire & One run of PVC conduit with accessories shall be measured as One length.
,---ditto-- all as per item No 132 above but two run of 10sqmm dia and one run of 6 sqmm dia in 25mm dia conduit complete all as specified and directed.
Taking down carefully sub main wiring with PVC casing capping / PVC surface conduit and making good disturbed surfaces complete all as specified and directed.
Supply and fixing ceiling fan 1200mm sweep 50 Hz AC 230 votls, 5 star rated in white colour with BLDC fan motor, blade set, 0.45 mtr down rod, canopy set, rubber reel including 0.5 Sqmm three core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling and writing MES No. on fan body as required complete all as specified and directed.
M&L for taking out ceiling fan 1200mm sweep 50Hz AC 230 volts and refixing at new location including minor repair and replacement of fan blade or spray painting in existing colour including 0.5sqmm thre core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling as required.
M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) making PCC pit of size 0.3m X 0.3m X 0.3m (inner size) in mix 1:3:6 type C1, 40 mm thick cover reinforced with 6 mm dia M.S bars, 3 nos both ways with lifting hook made out of 8 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, including necessary excavation and earth work and testing on completion to achieve value not more than 2.0 ohm complete all as specified and directed.
Supply, laying, jointing, testing & commissioning LT under ground cable XLPE insulated, screened PVC bedded, galvanised steel strips or wire armoured, heavy duty with multi stranded aluminium conductor, 1100 volts grade (ISI marked) laid in trenches, ducts, pipes or fixed on poles of size 16 Sqmm 2 core including all necessary clamps, nut, bolt washers complete all as specfied and directed .
M&L for sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified and directed by the Engr-in-Charge Note : punned thickness shall be measured for payment.
M & L bricks for protection cover to UG cable (with old size sub class B bricks) with width equal to length of brick, laid dry and flat abutting each other with gaps between adjecent bricks not exceeding 10mm complete all as specified and directed.
S & F 40 mm bore GI tubing light grade with all fitting (ISI marked), fixed to wall/ pole / laid in road crossing etc as reqd complete all as specified and directed.
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and modular sunken GI metal boxes not less than 1.0mm thick and incl white modular cover plates with frame for mounting modular switches, sockets, fan regulators etc for one light point controlled by one switch complete all as specified and directed.
,---ditto--- all as per item No. 142 here-in-before but for one fan point controlled by one switch and regulator complete all as specified and directed.
,---ditto--- all as per item No. 142 here-in-before but for one socket outlet 6 amp controlled by one switch on the same board with other switches complete all as specified and directed.
,---ditto--- all as per item No. 142 here-in-before but for one socket outlet 6 amp controlled by one switch on indepdendent board complete all as specified and directed.
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and modular sunken GI metal boxes not less than 1.0mm thick and incl white modular mounting cover plates with frame for mounting modular switches, sockets, fan regulators etc for 3 pin 16 amps socket outlet point controlled by one switch on independent board complete all as specified and directed.
S&F switch modular 1 way 6 Amps, 230 volts, 1 module complete all as specified and directed.
S&F modular switch 1 way 16 Amps, 230 volts, 1 module complete all as specified and directed.
S&F modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts complete all as specified and directed.
S&F modular socket 6 Amps, 2/3 pin combined 2 module AC 230 volts complete all as specified and directed.
S&F modular hum free electronic step fan regulator 120-280 volts of 100 watts capacity (socket type), 2 module including connecting up complete all as specified and directed.
S&F MCBs Distribution board TPN 4 ways, powder coated, CRCA steel sheet, IP-43, IK09 with reversible double door, 415V, recess mounted having insulated 200 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.
Supply and fix MCCB four pole 63 Amp, adjustable type, with breaking capacity16 KA including reqd cable connections through GI pipe with copper lugs of suitable size provided testing & commisioning and make good complete all as specified and directed.
S&F exhaust fan, high speed, steel body 300mm sweep, 1200 RPM, four blade, heavy duty motor, copper wound double ball bearings, grey colour with louver, nuts, bolts and washers and three core 0.75sqmm copper cable connection with protective steel bird guard complete all as specified & directed.
S & F 20amp, single pole and neutral socket outlet, with 2 pole and earth metal enclosed plug top in powder coated CRCA steel sheet enclosre recess mounted with chained matel cover for socket out let with and incl one single pole B curve MCB 20 to 25 Amps complete all as specified and directed.
Supply install commissioning and testing of hi-wall split Air Condition units in Stone walls - Type: Split AC, Inverter Model/ 5 Star Rating, adhering to Specified BEE & EER above 3.1, Refrigerant R 410 A Environmental Friendly Gas- indoor/outdoor complete with and incl cordless remote control unit and with in -built air ioniser and Plasma filter for better indoor air quality, Evaporator & Condenser Coils and of capacity 2.0 TR, service wire incl outdoor mounting stand complete all as specified and directed.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed input variation between 170 V to 250 V with ouput stabilized at 230 V with accuracy +2.5% and of capacity 5.0 KVA complete all as specified and directed.
S&F Copper Tubing suitable for the item Nos 157 in extended lenghs as requird from indoor to outdoor and Suitable insulation of Nitrile Rubber insulation fixing arrangement commissioning and testing complete all as specified and directed. Note : One meter run of sunction line of size 1/2" or 3/8" and liquid line of size 1/4" alongwith nitrile rubber insulation is counted as one RM for measurement purpose
Cutting of Stone walls and placing of 4" dia PVC pipe of required length for split AC pipe lines power lines and drain pipe through and making the surface good for further installation process complete all as specified and directed.
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
Satish kumar and company
UNIVERSAL INFRAPROJECT PVT LTD
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .