Thirumalai Naiyakar Mahal - Electrical

Amount

Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with earth connection only. (SD 710.) (LDB -

Supply and fixing of 6 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB Incomer ) with double door (metal door) with 1 no. 160 A 4 P MCCB switch as incoming and 4 nos. 63A 3P MCB , 6 nos. 6A to 32A SP MCB as outgoing with suitable cable end box on wall with earth connection only. Higher End (Data -3a)()

Supply and fixing of 4 Tier 56 Modules sheet steel enclosure distribution board (Flexi DB) with double door (metal door) with suitable cable end box in flush with wall with earth connection only. Higher End (SD 697)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD 598)(UPS

Supply and fixing of Wall/Ceiling-mounted Wall Grazing Lineal lighting system for outdoor use. Includes 2 cable outlets to facilitate chain mounting. Metres of cable included: 0.25. Adjustable light source. Structure material: Aluminium. Structure finish: Urban grey. Diffuser material: Tempered glass. Diffuser finish: Transparent. Warranty: 5 Years. Product net weight (Kg): 4.54, Product length (mm): 500, Product height (mm): 30, Product aperture (mm): 100, Class 1. IP: IP66. IK IK05. LED. No. of lampholders or LEDs: 1. LED brand: NICHIA. Driver brand: OSRAM. Maximum power of light source: 36w. Colour temperature: 3000K. Colour rendering index: 80. Hours of life: 50.000h L80B20. UGR: 15.6. Photobiological risk: RG2. % de Flickering: +/- 3%. Real flux (lm): 7110. Real lm Voltage / frequency range: 220-240. Voltage: 3. Equipment included: Yes. Total power: 95. Power factor: 0.95. Dimmable equipment included: DALI/PUSH. with required support and angles. brand - LEDSC4 / IGUZZINI (Data-1)

Supply and fixing of Wall/Ceiling-mounted Wall Grazing Lineal lighting system for outdoor use. Includes 2 cable outlets to facilitate chain mounting. Metres of cable included: 0.25. Adjustable light source. Structure material: Aluminium. Structure finish: Urban grey. Diffuser material: Tempered glass. Diffuser finish: Transparent. Warranty: 5 Years. Product net weight (Kg): 4.54, Product length (mm): 500, Product height (mm): 30, Product aperture (mm): 100, Class 1. IP: IP66. IK: IK05. LED. No. of lampholders or LEDs: 1. LED brand: NICHIA. Driver brand: OSRAM. Maximum power of light source: 24 w. Colour temperature: 3000K. Colour rendering index: 80. Hours of life: 50.000h L80B20. UGR: 15.6. Photobiological risk: RG2. % de Flickering: +/- 3%. Real flux (lm): 7110. Real lm Voltage / frequency range: 220-240. Voltage: 3. Equipment included: Yes. Total power: 95. Power factor: 0.95. Dimmable equipment included: DALI/PUSH. with required support and angles. BRAND LEDSC4/IGUZZINI (DATA-2)

Supply And fixing of decorative Wall-mounted system - Warm White - Symmetrical optic - 24W 4300lm - 3000K indoor pendant luminaire with direct light symmetrical optic, designed to use LED lamps. brassassembly.Internal diffuser in milky, textured polycarbonate to create a high level of light beam uniformity; external diffuser and external screenmade of UV-stabilised, transparent polycarbonate. Diver should be compatable to Dali 2. with required support and angles. (DATA - 3)

Supply, installation, testing and commissioning of Micro Processor based conventional 4 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel / Cooper)

Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel / Cooper)

Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel / cooper)

Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers (Make: Ravel / Cooper)

Supply, installation, testing and commissioning of External horn type Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers (Make: Ravel / Cooper)

Supply, Installation, Testing and commissioning of 24VDC Power Supply with 5 amp rating, shall provide the supplies to Beam detector/Conventional Sounders/Strobe, Shall have LED indications for Power supply ON, battery Fail, Battery Charging etc, Shall have inbuilt battery charging circuit, (Make: Ravel / Cooper)

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers.

Supply, installation, testing and commissioning of of 1 Channel DALI2 high frequency fluorescent ballasts controller. Each DALI outputs allowing it to control up to 64 DALI devices. The device is DIN-rail mountable integral DALI bus power supply, removing the need for an additional external device. Compatible with DALI 209 drivers – Provides control of tunable white luminaires. Auto-enumeration – Provides automatic enumeration of DALI drivers when powered on and enables self repair of the network system if a DALI driver fails. Each DALI Controller is compatible with to connect DALI Sensors, Interface modules & other Device. Supply: 100-240V 50/60Hz Single Phase at 0.5A, Control Outputs: 1 x DALI Control Outputs, each supporting a full DALI universe of 64 channels, including backward channel DALI Bus Power Supply, Internal 15V rated 128mA per universe Mains Outputs : 1 x 20 Amp feed through switched circuits for DALI ballast mains supply. Control IO :1 x RS485 DyNet serial port / DMX, 1 x AUX programmable dry contact input. DC supply 12V @ 120 mA Operating Environment : 0˚ to 40˚C ambient temperature, 0% to 90% RH non-condensing. Certification: CE, RCM, UL/cUL, FCC, ICES, UKCA, RoHS DALI-2, IEC62386 Equivalent: Philips Dynalite: DDBC120-DALI.

Supply, installation, testing and commissioning of 12 Channel Multi types feed through power circuit design equivalent to 12 pole contactor & each pole should be controllable via system network. Each Switched loads should support 20A per channel upto max. of 180A per device with an inrush current of 500A. Device should support multiple wiring schemes - single phase & neutral Or three phase & neutral (Star) & should have service override switch can be accessible from the front panel. Supply Voltage: 100-240AC, system Output DC current 200mA which can support 10 button panels without any additional power supply. Device should also have dry contact Aux input . Compliance Certification: CE, RCM, UL/cUL, FCC, ICES-003, RoHS Equivalent to Philips Dynalite DDRC1220FR-GL-V3.

Supply, installation, testing and commissioning of Antumbra Display keypad with Central Display to present multiple pages of functions & system Information User Interface White with White Rim for different zones etc with Fully programmable options for Indivuidual control / group control / Scene control / Tasks etc. Wall mounted on 2M (3 X 3 size) modular box. The antumbrainterface interface detects an approaching user and ‘wakes up’, initiating a wall-wash lighting effect to encourage interaction. Loaded icons like presentation scenario, meeting scenario, master On/Off, Powersaving mode etc along with a LED indicator for each operations. Central LCD - Allows for system information to be shown such as temperature, time, channel level and current scene. Button function can change when navigating between the up to 16 pages. Operating on 12V DC @ 40-50mA from network. Equivalent to Philips Dynalite PADPE-PC-X+DACM-Dynet.

Supply, installation, testing and commissioning of Network Gateway to provide integration between the control systems and Ethernet networks. It is designed to provide remote control of sites and link multiple sites together, using the Internet or a corporate LAN as a backbone. The device supports the TCP/IP protocol, with static or DHCP assigned IP addressing. An integral webserver allows Browser based control scenarios and full control with iOS/Android Mobile and Tab devices. The interface incorporates a Programmable Logic Controller that can process comprehensive conditional and sequential logic and arithmetic functions and time based events and schedulings. Power: 15V DC supplied by the control system network at 200mA.Certification: CE, RCM, UL/cUL, FCC, ICES, RoHS. Philips Dynalite item Code:PDEG.

Towards Programming Charges for 1 channel DALI2 high frequency fluorescent ballasts controller, 12 channel multi types feed through power circuit design equivalent to 12 pole contactor & each pole should be controllable via system network, Antumbra Display keypad with Central Display etc for the above Lighting system.

Supply, Installation of CAT6 U/UTP 23/24AWG cable as per the approved LMS drawings for Multi function Sensors & Keypads for Shop Floor. ETL VERIFIED TIA-568-C.2, LSZH / UL CM. (Purple Colour for Colour Identification) Approved Makes: Kordz / Comscope / Molex / Belden

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade inrigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.

Supply and Laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3 1/2 x 120 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clarnping of 3 1/2 x 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clarnping of 3-1/2 x 25 sq.mm.. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clarnping of 4 x 16 sq.mm.. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 4 x 16 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 4 x 16 /25sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clarnping of 4 x 10 sq.mm.. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 4 x 10 sqmm PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 4 x 10 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Cutting and re-fixing of floor granite to a width of 100 mm and a depth up to 100 mm, this including cutting and laying of granite with laying of 2 runs of 32 mm HDPE pipe upto junction box to accommodate cable for ground lighting. And making good of concealed portion as directed by engineer.

Supply and fixing of Honeywell/ APC/ Belkin Make 4 Socket 2 Meter Surge Protector

Supply and installation of Samsung/ LG Make Make 32 inches HD television

Supply, installation, testing and commissioning charges of Sparsh/ Hik Vision/ Dahua Make 5MP Bullet CCTV Camera with following specifications; CMOS Image Sensor of size 0.37 inch, Day/Night Capable, 30 meter IR Range, 3.6mm Focal Length, triple compressed video streaming, 120 dB WDR, 60-70 SNR, H.265+/ H.264 Codec. compression technology, 1 to 1/100000 Electronic Shuttter speed, features such as white balance, auto gain control, back light compensation, remote administration, remote system update over network, PC Client, Web client, ONVIF Support, Static and Dynamic IP Support, IP 66 Housing, Certifications include FCC, CE and BIS.

Supply of D-Link Make 8 Port PoE Switches for CCTV IP Camera.

Supply and installation of 16 Channel Network Video Recorder with 2 numbers of SATA ports, resolution upto 4K, 8ch Sync Playback; Bandwidth I/O: 100 Mbps/ 80Mbps, Support Camera Smart VCA, Dual RJ45 Port, 2 SATA (upto 6TB), 1 HDMI & VGA, 2USB, Alarm I/O 0/1, RAID. Make:Uniview/ Hikvision /Dahua.

Supply and fixing of 6TB Hard Disk for NVR with all relevant accessories

Supply and installation of 1.5 Meter HDMI Cable. Make:Impression/Equivalent

Supply and installation of Wireless Computer Mouse. Make:HP/Equivalent

Supply and fixing of 6U Rack with accessories and fan with suitable angle iron frame work.

Supply and run of Polycab/ Legrand/ D-Link Make Unarmoured LAN Cable in existing PVC rigid pipe on wall and ceiling.

Supply and run of 3 core 1.5sq.mm PVC insulated SC unsheathed Cu. Conductor of 1100V grade in existing concealed PVC rigid pipe in wall and ceiling

Supply and fixing of 25mm PVC rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour.

Supply and erection of 1 kVA 1 Phase online UPS (Single Phase In & Single Phase Out) System with Battery and 1 hours back-up.(M-2100) (For CCTV, LAN and EPABX)

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI Pipe of Dia not less than 32 mm complete with necessary masonry work.

Supply and run of 4sq.mm (56/0.3) PVC unsheathed SC copper cable in existing PVC Pipe for earth connection

Supply and fixing of Spotlight for outdoor use. With adjustable lighting positioning. Structure with double body design to prevent heat generated by the LED affecting the useful life of the driver. Adjustable light source. Structure material: Aluminium. Structure finish: Urban grey. Diffuser material: Polycarbonate. Diffuser finish: Transparent. UV protection. Warranty: 5 Years. Ta max: 50ºC.Product net weight (Kg): 0.89 Product length (mm): 102 Product width or diameter (mm): 102 Product height (mm): 143 Product aperture (mm): 100 Class 1. IP: IP65. IK: IK10. LED. No. of lampholders or LEDs: 5. LED brand: CREE. Maximum power of light source: 15W. Colour temperature: 3000K. Colour rendering index: 80. MacAdam Steps: 3. Maximum diameter of luminaire bulb: 50.000h L80B20. UGR: 12.9. Photobiological risk: RG2. Real flux (lm): 1416. Nominal flux (lm): 1836. Lm/Real W: 76. Voltage and frequency range: 100-240 VAC. Voltage: 3. Gear included: Yes, electronic. Multi-voltage gear included. Total power: 18.6. Power factor: 0.94.with required support and angles. brand LEDSC4/DELTA

Supply and fixing of Bollard for outdoor use. For general lighting. Structure material: Aluminium. Structure finish: Urban grey. Diffuser material: Polycarbonate. Diffuser finish: Opal. UV protection. Warranty: 5 Years. Product net weight (Kg): 3.18, Product width or diameter (mm): 126, Product height (mm): 900, Class 1. IP: IP66. IK: IK10. LED. No. of lampholders or LEDs: 1. LED brand: EDISON. Maximum power of light source: 23W. Colour temperature: 3000K. Colour rendering index: 80. MacAdam Steps: 3. Hours of life: 50.000h L80B20. UGR: 21.1. Photobiological risk: RG1. Real flux (lm): 2146. Real lm/W: 83. Voltage / frequency range: 100-240/50-60Hz. Voltage: 3. Equipment included: Yes. Total power: 26. Power factor: 0.90. Dimmable equipment included: ON-OFF.with required support and angles. brand - HYBEC/DELTA

ANNAI ELECTRICALS (BID ID -1078394)

Ravi Electricals (BID ID -1077634)