Provision of Road Signal at Interlocked LC gates over Lucknow Division of Northern Railways.

Description:- Excavating and refilling of trench to the level of ground with rammed earth asper Drg.

station alongside thetrack. It shall conform to the safe distance as per signalling and cable plan in all type of soil, it also includes clearence of roots of trees and bushes.

Description:- Laying of signalling/Telecom/power cables of different sizes as per attached guidelines (Drg. No.(NR/S&T/Con/1.1/97A) or latest on signalling cable laying and as per cableroute plan

before and after its laying of all type of outdoorcables. Contractor have totransport cable from any store of LKO division to site carefully. Meggering to be done foreachdrum separately. Meggering sheets to be supplied and filled up by contractor and submitted to Railways, as per instructions by Consignee.

(NR/S&T/Con./1.1/97A) and as per instruction of the site Engineer.

04 LUCKNOW-NR-DIVISION-S AND T/NORTHERN RLY

lubricated pipes as per RDSO Spec no. RDSO/SPN/204/2011 Ver 1.1 or latest of 120mm nominal dia in the bore at the depth of 1.4 meter to 2.1 meter from formation level (level of earth below ballast) as per drawing and as directed by Engineer Incharge by trenchless technology for laying of signalling /telecom/power cable under track /culvert etc. cable laying covered separately. Inspection-RITES for Supply of DWC/HDPE pipe. The following required coupling arrangement should also be supplied: 1. Suitable snap fit couplers with rubber O ring, 2. Spacers, 3. Tees. 4. Bend. 5. End Cap(1 no. =6mtr ,Straightpipe). (A) Thecost shall include horizontal boring through any intermediate obstruction, either natural or man made or any boundary etc. (B) The rate is inclusive of all the materials equipment and labour required for during trenchless horizontal boring under the railway track. Nothing extra shall be admissible on any account than the rate quoted above. (C) The Pipe is to be laid under railway track/road /culvert. All necessary arrangement are to be provide and all precautions are to be end is not deviated from the horizontal level line by more than 250mm in horizontal and vertical direction. (D) The rate shall be inclusive of direction and protection of under ground utilities encountered during boring. (E) The payment for boring shall be made only when DWC/HDPE pipe are laid in the bore.

Description:- Supply and installation of earth electrodes as per std.practice. The item includes digging of pitin earth, 3 Mtrs. deepand fixing earth electrode pipe.Casting of cement concrete enclosures as per drg. No.(NR/S&T/CON/6.4/97) or latest. The soil treatment shall be done as per std.practice. The item includes provision of mild steel flat of size35mm x 6mm (as per IRSEM) and nut

toblock instrument,cable sheath of power equipment, signalbase, apparatus case,CT rack / relay racks,other equipments asper the instruction ofEngr. at site & IRSEM.Earth connectionSignal & location boxes to be doneDrg.No. 19-D6 ofIRSEM App II orlatest. Complete materials such as earth electrodes asper Drg. No. (NR/S&T/CON/6.3/97)or latest , cement,wiring material, nutbolt for connection &mild steel flat of size minimum 35mm x6mm or 210 sqm as per SEM etc. to be supplied by thecontractor. Inspection by - Consignee for supply of earth electrode.

made of PBT as per IRS spec. No.IRS-S-75/2006(Rev.2) or latest & IRS drawing No.SA-23741/A (Alt. 4) or latest. Inspection: RDSO

Description:- Fixing of ARA(M-6) Terminals /Screw less connectors / modular disconnect terminal

steel/brass nuts & bolts. This includes provision of two additional holes on the board on either side for cable conductor entry. The work shall be carried out as per instructions of Railway Engineer incharge.

Description:- Termination of all the cores of all type of outdoor cables after its laying on both

proforma for each core of the cable separately. This also includes dressing and lacing of cables on both ends.Proforma for testing and material for lacing to be supplied by the contractor.

NR/S&T/Con / 2.1/97 or latest.All material such as Anchor bolts cement, sand, aggregate to be supplied by the contractor.

tubular) and platform confirming to IRS:S-6-81 and Drg. No 2011/M and for the ladder RDSO Drg. No. SA-23153 (adv) or latest. Inspection: RITES

Description:- Fixing of 3/4-aspect of colour light signal CLS surface base, bolting on the foundation. Erection of CLS post with signal unit on the top or on an offset bracket and fitting ladder and guard to the post at the top Concreting ladder base and embedded into the ground with supporting bracket in the middle. Blanking of the ladder for a distance of1 feet between the height6'9"and 7'9"from the rail level by MS angle and MS sheet 0.6mm thick wherever required. Thisincludes provision of wooden

hood on CLS unit, wiring the CLS unit and fixing the signal. Elevation and distance of foundation fromtrack shall be in accordance with schedule of dimension for Indian Railway published by Government of India & approved Drawings. All items for the above work except items mentioned in Annx B-2 shall be supplied by the contractor including following items. (i) U bolt for offset bracket. (ii) Wooden cross arm1Mx1M (iii) MS sheet and MS angle for blanking of ladder (iv) Wire mesh guard, U- lock for unit , nuts and bolts etc. for the following. (v)Supply and fixing of Signal Number Plate (Retro refractive type) with complete fittings as per standard railway practice.

Description:- Supply of colour light signal unit 3/4-Aspect complete without lamp holder, lamp, 12 lense and signal transformer as per IRS:S-26/64 & RDSO Drg. No. SA-23002 A/M(Adv) or latest with hand cuff lock 2 No. Inspection: RITES LUCKNOW-NR-DIVISION-S AND T/NORTHERN RLY

Drg. No. SA-23840 (adv), Spec. No. IRS-S-23/88 (Dependent post type). Inspection by Consignee

Drg no. SA 23848 (adv) or latest & Spec No. IRS-S-23/88 (Independent post type). Inspection : RITES

Description:- Wiring of relays in relay room/relay huts as per approved wiring diagrams. All material required will be supplied by contractor including indoor cables and wires of 1x1, 1x0.6, 3/.029,

IRS S76/89 (Amd.3) or latest available specifications . Thisalso includes soldering, dressing, bunching, lacing, fixing of relay bases etc. and provision of LED indication box of vitalrelays in relay room if required and provision of potential free contacts of all relays on tag block for data logger as per instruction of site Engineer.

Description:- Supply of Relays- Miniature, Plug-in type, Tractive Armature, M to C, Universal AC

BRS:941A,STS/E/RELAYS/AC LIT LED SIGNAL/09-2002 Amdt1, IRS S-23 & 34, STR: SIQ 0420 Ver.1 or latest. Inspection-RDSO

Relay, Style QNA1, 24 V DC, 8F-8B Contact, Code ABDGH/ABDFH Spec: BRS:931A ; IRS S 34 ; IRS S 23 ;IRS S 60-78 , STR: SIQ 0420 Ver.1 or latest. Inspection : RDSO

as per the instructions of railways representative at site . It should be fitted inside MS Sheet box of min 20 gauge on suitable post. (Inspection by Consignee)

3.0 A (System, Rapid, Malnad or RBCO make or similar). Inspection - Consignee

RDSO Specn.No.IRS:S-78/92or latest and Capacity - 630 mili Amp. (material will be supplied only from approved vendors of RDSO). Inspection - Consignee

RDSO Specn.No.IRS:S-78/2006 or latest and Capacity - 2/4/6/10A/16A/20A Amp. (material will be supplied only from approved vendors of RDSO). Inspection- RDSO

Description:- Supply of 4 conductor dis-connect terminal block for test and measurement 0.8

rail DIN 35 front entry cage clamp connection Grey wago or similar as RDSO/SPN/189/2004 Rev. 3.0 or latest. Material to be supplied from RDSO approvedfirm. Inspection : Consignee

Wago or similar as per RDSO/SPN/189/2004 Rev. 3.0 or latest. Inspection : Consignee.

RDSO/SPN/189/2004 Rev. 3.0 or latest. Inspection : Consignee

similar as per RDSO/SPN/189/2004 Rev. 3.0 or latest. Inspection : Consignee

Inspection- Consignee.

28 LUCKNOW-NR-DIVISION-S AND T/NORTHERN RLY 28 Description:- Fabrication, Supply and fixing of retroreflective P/G/C markers with complete fittings as per approved Drg. No. NR/S&T/CON/6.2/97or latest. All material required for the job such as MS sheet, MS angle. Nut and bolts, paint and painting materials will be supplied by the Contractor. The P and G markers shall be as perDrg. No. S 23456 (Adv) & SA 23477(Adv) or latest respectively. Inspection : Consignee for supply portion.

Description:- Supply of 4 aspect weather proof Rain Protection Signal Cover made with Polylefin, polythin sheet avg randon thicknes 200 micron or more and the sheet processed with CX slurry polymerization to meet good rigidity, less draw down and mallebility stress crack resistance and

the edge of the cover with suitable lacing rope of good quality to bind the cover over the base. For 4 Aspect signal Unit size: 200 cm x 45 cm x 23 cm. With on back side 75 mm wide cross mark of silver colors of 100 micron thickness to provided on Back with good quality adhesive (pressure sensitive adhesives) used in Duct tape or better. Note:- 1.Sample must be approved before bulk supply. Inspection- Consignee.

Description:- Supply of 3 aspect weather proof Rain Protection Signal Covers made with Polyolefin, polythin sheet avg random thickness 200 microns or more and the sheet processed with CX slurry polymerization to meet good rigidity, less draw down and malleability stress crack resistance and

the edge of the cover with suitable lacing rope of good quality to bind the cover over the base. For Aspect signal Unit size: 150 cm x 45 cm x 23 cm. With on back side 75 mm wide cross mark of silver colors of 100micron thickness to provided on Back with good quality adhesive (pressure sensitive adhesives) used in Duct tape or better. Note:- 1.Sample must be approved before bulk supply. Inspection- Consignee.

Description:- Supply of 2 aspect weather proof Rain Protection Signal Covers made with Polyolefin, polythin sheet avg random thickness 200 microns or more and the sheet processed with CX slurry polymirazation to meet good regidity, less draw down and meleability stress crack resistance and

the edge of the cover with suitable lacing rope of good quality to bind the cover over the base. For 2 Aspect signal Unit size: 120 cm x 45 cm x 23 cm. With on back side 75 mm wide cross mark of silver colours of 100micron thickness to provided on Back with good quality adhesive (pressure sensitive adhesives) used in Duct tapo or better. Note:- 1.Sample must be approved before bulk supply. Inspection- Consignee.

Description:- Register Size : 8.5"* 10.5" 80 GSM + both side printing + Hard binding approximately

sample copy of each formate for approval. The contractor have to transport material to store of consignee. Inspection- Consignee.

Description:- IPS Battery Maintenance Record Register as per Indian Railway Signal Engineer

hard binding approximate more than 400 pages each resister. as per given formate/ formates approved by engineer. Firm have to submit one sample copy of each formate for approval. The contractor have to transport material to store of consignee. Inspection :Consignee

instruction of consignee. All the material to be transported carefully without damage. Contractor have to do proper stacking of material and prepare list of material.

Description:- Supply & Application of Cypruss Silate Siloxine Alithativ Urethane Resin Blend Solvent

white colour with a genuine product sticker when remove display "VOID" on each container / drum containing 20Lit approx. each as per RDSO guidelines Inspection :Consignee

Description:- Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surfacewherever necessary with contractor's own supply of paints.Wherever required contractor shall apply coating of epoxy paint alsoas per instructions of site-

Paints/ Nerolac / Dulux /Berger. The primer / enamelpaints (Aluminum synthetic, blackenamel, brilliant white and yellow) will be as per (IS 5660 of 1970) /(IS 2932 of 1974).Inspection:Consignee Inspection Charges: None Payment Terms:100% after Execution Apparatus Case Full Size. (Outside & inside) Inspection :Consignee

LUCKNOW-NR-DIVISION-S AND T/NORTHERN RLY Description:- Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surfacewherever necessary with contractor's own supply of

in-charge. Epoxy paint will be supplied by Railways.NOTE:- Thepaint and primer should be fromAsian Paints/ Nerolac / Dulux /Berger. The primer / enamelpaints (Aluminum synthetic, blackenamel, brilliant white and yellow) will be as per (IS 5660 of 1970) /(IS 2932 of 1974).Inspection:Consignee Inspection Charges: None Payment Terms:100% after Execution Apparatus Case Half Size. (Outside & inside) Inspection :Consignee