Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.0 LAccepted-AOC WARD NO 1 HOUSE NO 04 SUBASH NAGAR UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Accepted-AOC Being lowest bidder after deducting schedule of credit Rs. 39365 | |
| 2 | L2₹27.2 L+₹15,743 (0.58%)Rejected-Finance 15 BOH ROAD DEFENCE ENCLAVE AMBALA CANTT 133001 HR | AMBALA | HARYANA | 133001 | L2 | Rejected-Finance 2ND LOWEST BIDDER AFTER DEDUCTING SCHEDULE OF CREDIR RS 33815 | |
| 3 | L3₹27.6 L+₹46,287 (1.71%)Rejected-Finance | L3 | Rejected-Finance 3RD LOWEST BIDDER AFTER DEDUCTING SCHEDULE OF CREDIR RS 33815 | |
| 4 | L4₹29.5 L+₹2.4 L (8.99%)Rejected-Finance | L4 | Rejected-Finance 4TH LOWEST BIDDER AFTER DEDUCTING SCHEDULE OF CREDIR RS 33815 | |
| 5 | L5₹30.3 L+₹3.2 L (11.9%)Rejected-Finance VILLAGE CHANNI POST OFFICE SATTANI DISTT UDHAMPUR UDHAMPUR UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L5 | Rejected-Finance 5TH LOWEST BIDDER AFTER DEDUCTING SCHEDULE OF CREDIR RS 33815 |
Tender Value
₹28 L
EMD Value
₹56,000
Closing Date
22 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (ARMY) DHAR ROAD
GE (ARMY) DHAR ROAD
Certain B/R repair for JCO/OR Md Accn at Zone A Dhar road Under GE (Army) Dhar Road.
2022_MES_547729_1
8068/NIT-40/2022-23
Open Tender
Civil Works
Item Rate
240 days
GE (ARMY) DHAR ROAD
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (ARMY) DHAR ROAD
₹56,000
Yes
17 Nov 2022
25 Aug 2022
26 Sept 2022
26 Aug 2022
22 Sept 2022
9 Sept 2022
Amount
Demolition of cement concrete (un-reinforced) in ground floor and in paving not exceeding 15 cm thickness ( below or above ground level) complete
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for.
M&L for 50 mm thick in Plain cement concrete type C1 ( 1:3:6)( using 20 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.
M&L 40mm thick PCC (1:2:4) type B1 using 20mm graded aggregate as in floor finished even and smooth using extra cement complete all as specified as directed.
M&L for providing cement concrete Type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as nominal mix in lintels upto 1.5m clear span, cills, steps, parapets, copings, bed plates, and the like including weathering, slightly rounded or chamfered angles and throating, including use of form work complete all as specified and directed.
M&L RCC nominal Mix as in supported on walls, beam and columns in floors, roofs , landings, balconies, canopies, deck slabs and in shelves and the like Type B1 1:2:4 (20mm graded aggregate) incl demolition complete all as specified and directed
Demolition of slab and tiles laid, bedded and pointed in any mortor of any description or thickness in floors, aprons, platforms etc complete
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.
M&L 18- 20 mm thick for Granite (Z Black) work (table rubbed and polished) in steps, jambs,pillars, window-cills, cooking plat-forms and like in cement mortar (1:4) incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite incl screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 4 for laying floor finishes complete all as specified
M&L for machine cut kota stone slab 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 4 for laying floor finishes complete all as specified..
M&L for machine cut kota stone slab 15-16 mm thick in riser of steps, skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting invertical surface complete all as specified and as specified.
M&L for Glazed cermic coloured tiles 300x450x 7mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface including dismantling of existing old wall tiles complete all as specified and as specified.
M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (squqare/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) including dismantling of existing old floor tilescomplete all as specified.
M&L Non skid ceramic tiles 7-8mm thick in floors area exc.0.11sqm and not exc.0.18 sqm set and jointed in neat cement slurry and pointed in coloured cement to match colored tiles incl over 15mm thick screed bed or bedding layer of CM (1: 4) for laying floor finishes including dismantling of existing old floor tiles all as specified and directed.
M&L Non skid ceramic tiles 7-8mm thick in floors area exc.0.11sqm and not exc.0.18 sqm on vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match colored tiles incl over 10mm thick in CM (1:4) on brick or concrete surfaces of finished rough to receive the tiles including dismantling of existing old wall tiles all as specified.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.
Taking down shutters of any description not exceeding 1.0 Square metre each complete.
Taking down shutters of any description exceeding 1 Square metre and not exceeding 2 Square metre each complete.
Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and re fixing in same opening
Factory made, 2nd class hard wood,35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads and with mullinas for securing glass etc. size of members of shutters as specified in SSR Part - I section 8.20 (a), all as specified and directed by Engr-in-Charge.
Factory made, 35mm thick 2nd class hard wood, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side sflush shutters 35 mm thick complete, all as specified and directed by Engr-in-Charge.
S&F 2nd class hardwood as small fittings n exc 200cu cm each such as brackets of any type , latch and hinge blocks, shaped door and window stops and the like incl, all necessary labours and butt hinge of size 40mm complete all as specified as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame made out of mild steel tubes for top and bottom rails . Mild steel frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and gap insert for top rail and bottom rail ; Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded /sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the frame at site as per specification clause No 8B.1 to 8B.10 and drawing on page No 146 of MES SSR-2010 Part-II.
Providing Kitchen cabinet shutter/Partation/Shelves in required size at site made out of 18mm thick MDF board one side decorative lamination PVC sheet complete all required etc. The panels shall be fabricated using adhesive and secure as required. All edges shall be covered with 2mm thick edge bonding taps or 90⁰ edge bent finish as per manufacturers instructions including dismantiling of old board comlete all as specified
S&F cotinuous (piano) hinges brass , width of flaps when open in 40mm
S&F Steel Magnetic door Catehcer for cupboard/cabinet/wardrobe shutters including necessary arrangement comlete all as speciffied and directed.
S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing on Page No 150 MES SSR-2004 Part-II and as directed by the Engr- in-Charge.
S&F Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate ,etc complete all as specified as directed.
S&F Pressed steel frames of size 105x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate etc complete all as specified as directed
S&F Steel windows made up of box steel section of 16 gauge ms sheet ub outer frame, shutter farame and centre frame with outer side glazed shutter and inner side wire mesh shutter fixed as shwon in drg consisting with two nos pintol hinges 100 mm long, two nos stove enemaled tower bolts 150 mm long and one no steel handle, deovitailed are welded each panelan complete with necessary cleats and stopers all as specified as directed.
Steel ventilator made up of box steel section of 16 gauge MS Sheet frame, partly fixed and partly openable with outer glazed shutter and inner side wire gauge shutter consisting with 2 Nos pintos hinges 100mm long 2 Nos stove enamelled tower bolt 150mm long and 1 Nos steel handle dovetailed or welded with each shutter complete with necessary cleat and stopper complete all as specified and directed (MS Gaurd bar/grill work will be measured and separately.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, all as specified.
S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3mm thick all as specified
All as per item No 34 above but pin headed
S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and avg width of aparture 1.18mm complete all as specified and directed
All as per item No 36 above but fixed in repairs.
S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified .
S&F aluminium anodised barrel tower bolts of extruded section with 100 mm long bolt, all as specified .
S&F in repair MS sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250 mm long.
S&F Alu alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250 mm long.
S&F MS butt hinges 100mm long medium weight cold rolled mild steel etc
S&F in repair 300mm long ordinary rat tail rod pattern spring incl roller and plate complete all as specified
S&F aluminium handles cast type, anodised, 150 mm size complete
S&F aluminium handles cast type, anodised, 100 mm size complete
S&F 100mm long Hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws.
S&F in repair Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats all as specified.
S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails braces, etc, complete , drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) & hanging; also fastening and fixing complete Fe 410 Gde complete all as specified and directed.
S&F for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 all as specified .
Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following: - (a) After demolition of floor & lime concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes and cleaning the surfaces with water. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:3) mixed with WP compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sq. m and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sq. m),(e) M&L for PCC 1:7 :12 for fillin of sunken portion after conceling all menbrane and sealing all joints to the entire with broken bats and light weight all as satisfaction of Engineer-in-Charge. MAKE: LAFARGE, TEXA, STP, BENGAL AQUAFLUX. lAFARGE, TEXA, STP, BENGAL AQUAFLUX.
Dimolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.
M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4)
M&L for Brickwork with subclass `B' bricks, straight or curved on plan to any radius in half thick brick built in CM(1:4)
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.
M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, all as specified .
M&L for 10mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cement, all as specified .
M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)
M&L Three coats of white wash on newly plastered surfaces of ceilings including preparation complete all as specified.
M&L Two coats of oil bound distemper on newly plastered wall surfaces over a coat of alkali resistant primer including preparation complete all as specified and as directed.
M&L Two coats of cement base paint on newly plastered wall surfaces over a coat of alkali resistant primer including preparation complete all as specified and as directed.
Preparing new plastered surfaces of walls and applying two coats of exterior emulsion paint (Weather Coat) over a coat of priming paint on roof boarder, drops, fins, chajja / roof facia, column etc, complete all as specified
M&L Two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surfaces of any description, over 10 cms in width or girth not otherwise described
M&L Two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces of any description, over 10 cms in width or girth not otherwise described
Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 15mm, all as specified .
Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 20mm, all as specified .
S&F 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings all as specified.
Ditto all as item No 66 above but fixing only
S&F 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings
Ditto all as item No 68 but fixing only
S&F in repair Bib taps,long body, fancy type,chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, all as specified.
S&F in repair Angle valves fancy type, chromium plated, cast copper alloy, with long shank and cup screwed for iron pipe or for unions of bore dia 15mm and fixed, all as specified.
S&F in repair Stop valves fancy type, chromium plated for iron pipe or for unions of bore dia 15mm and fixed, all as specified.
S&F in repair Shelf of Corner glass shelf fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum wight 300 grms)complete all as specified.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm long
S&F in repair Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe of 20 mm dia, all as specified and directed
S&F in repair 15mm bore Brass chromium plated shower rose with arm 200 mm size with or without swivel joints, any size incl fixing to steel pipe or union complete all as specified.
S&F in repair Vitreous china squatting pan of pattern Orissa Pattern size 580x 440 mm white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe fixed in repair including placing in position in floor and embedded in cushion of PCC 1:7:12 type E-1 and finishing the top surfaces to match with the existing flooring.complete all as specified and directed
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm boul size 405mm x 354m x 203mm, complete all as specified and directed
S&F in repair stainless steel Soap dish fixed to plugs chromium plated brass screws, all as specified.
S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description.
S&F in repair PVC flushiung cistern Kit for 10 ltr Capacity complete all as specified and directed
S&F in repair Waste coupling, 32mm dia, of PTMT (half or full threaded) .complete all as specified.
S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified.
S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified.
Dismantling of PVC pipes including all fittings and accessories, of 100/75 mm dia and in any position all as specified.
S&F PVC(SWR) pipes, 75 mm external dia single socketed in any length with rubber joints, fixed to walls/under floor with PVC brackets/clips including under floor will be coverd in PCC 1: 3:6 as complete all as specified.
S&F PVC(SWR) pipes, 110 mm external dia single socketed in any length with rubber joints, fixed to walls/ under floor with PVC brackets/clips including under floor will be coverd in PCC 1: 3:6 as complete all as specified.
S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified.
S&F PVC (SWR) bends suitable for 75 mm external dia complete all as specified.
S&F PVC (SWR) junction single, (single T) equal or unequal of 75mm dia
S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia
S&F PVC (SWR) junction single, (double T) equal or unequal of 75mm dia
S&F in repair Wash hand basins, Vitreous China ( flat back, size550X400 mm , coloured) , excluding tap etc including brackets with 32 mm bore waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, PVC connections 15mm size with CP brass coupling nuts of length 450mm, trap, grating and Union for discharge pipe, waste, chain and plug and porcelain stopper,chain and plug, PVC 32mm dia flush pipe and all accessories fixed in repair complete all as specified and directed.
Dismantling water tanks RCC or PVC 500 Ltrs capacity
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 litres all as specified .
S&F Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms).
S&F in repairs Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms).
S&F in repair CP grating round/Square 100 mm size with hole /with out hole, all as specified.
S&F in Repair PVC waste pipe 800mm long suitable for 32mm dia waste coupling complete all as specified.
S&F PVC Coated decorative mild steel curtain rod of 25 mm dia with brackets both side of globe in repairs all as specified and directed by Engr-in-charge.
S&F in repair stainless steel peg set of six sutable size of length complete etc.
Taking down old PCC tiles form roof and removing bedding/exixting roof treatment of any description and any type at any position all as specified and directed
M&L for taking down existing roof treatment of any description and any type all as specified and directed by Engr-in-Charge .
M&L Cement concrete tiles with cement and no pigment 30cmx30cm x22mm thick machine pressed set jointed and including 15mm screed bedding in CM 1:4 as pointed in neat cement slurry in flooring as cut and poslished.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.00 Kg of cement per sq m all as specified and directed.
Roof treatment for accessible roof :-(a) M&L for 15 mm thick cement plaster in cement mortar 1:4 on roof surfaces finished even and smooth without using extra cement, incl mixing of water proofing compound (b) Priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm all as specified Note: Water Proofing compound shall be measured and paid for separately).
Roof treatment for non- accessible roof :-(a) M&L for 15 mm thick cement plaster in cement mortar 1:4 on roof surfaces finished even and smooth without using extra cement, incl mixing of water proofing compound (b) Priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm, after carrying out treatment as specified here- in- before 02 coats of aluminium paint shall be applied complete all as specified and directed Note: Water Proofing compound shall be measured and paid for separately).
Supply only liquid water proofing compound
S&F in repair pillar tap, fancy type,chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, all as specified.
S&F in repair sink coupling 50mm of PTMT(half or full threaded) Complete all as specified and directed
MAHADEV ENTERPRISES
MADAN LAL SHARMA AND SONS
S.K CONSTRUCTION
PARAS RAM ASGOTRA AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .