OT-08

Amount

Earth work excavation and depositing on bank with initial lead of 10m & initial lift of 2 m in all types of soil as directed by the Engineer at site, including cost of tools and plants, labour charges, leads, lifts, transport, etc. complete.

Providing PCC 1:4:8 using 40mm HBG metal for foundation as directed by the Engineer at site, including cost of all materials, labour charges, curing, leads, lifts, etc. complete

Providing Random Rubble Masonry in CM1:5 for foundation as directed by the Engineer at site, including cost of all materials, labour charges, curing, leads, lifts, etc.complete

Brick work in CM 1:4 using Fly ash Bricks of size 23 x 11x 7.50 cm for super structure as directed by the Engineer in charge including cost of all materials, scaffolding, labour charges, curing, lead, lift, T&P etc., complete.

Supplying, fabricating and placing in position of RTS/MS rod for RCC works as directed by the Engineer at site including cost of steel, labour charges, binding wire, lead, lift etc , complete

Providing RCC 1:1½:3 using 20mm HBG metal as directed by the Engineer at site, including cost of all materials, labours, lead, lift, shuttering, curing, etc,complete but excluding cost of steel reinforcement. a)Plinth beam

Providing RCC 1:1½:3 using 20mm HBG metal as directed by the Engineer at site, including cost of all materials, labours, lead, lift, shuttering, curing, etc,complete but excluding cost of steel reinforcement. b)Lintel beam, roof slab, sunshade.

Supplying and filling with river sand in layers for basement well rammed, watered, consolidated as directed by the Engineer at site, including cost of filling sand, cost of labour, lead, lift, etc.complete.

Refilling with excavated soil (Other than sand) complying with standard specification for filling in foundation and basement as directed by the Engineer at site, including cost of labour charges, lead, lift, etc.complete.

Providing and fixing in position of anodized aluminium glazed sliding window with 90x30mm outer frame and 40x15mm sliding frame of 2.45mm thick as directed by the Engineer in charge including cost of all materials, 4mm thick plain glass, rubber beeding, cleat angle, labour charges, lead, lift, T&Ps, personal protective equipments, other safety appliances, etc., complete

Providing and fixing Anodized Aluminium Glass door, single leaf swing type with door closure and 4.00mm thick Plain glass with standard accessories but not limited to Handles, locking arrangement, rubber beading, Aluminium cleat etc complete as detailed below and as directed by the Engineer at site including cost of all materials, Labour Charges, T&Ps, Lead, Lift etc., complete. i)Shutter Verticals: Colour coated Anodized Aluminium section 47.5x44.5mm of 2.45mm thick - 2Nos ii) Shutter horizontals : Colour coated Anodized Aluminium section 100x45mm of 2.45mm thick - 3Nos iii) Shutter: Bottom and top shutter with 4.00 mm thick Plain glass.

Plastering in C.M 1:5, 12mm thick for wall surfaces including cost of all materials, labour charges, curing, lead, lift etc., complete.

Plastering in C.M1:3, 10mm thick for Ceiling surfaces including cost of all materials, labour charges, curing, lead, lift etc., complete

Floor finishing with designed first class ceramic tiles of approved make and colour over 10mm thick CM 1:3 bedding and pointing with same colour cement including cutting chase wherever required, cost of all materials, labour charges, leads, lifts, curing, T&P etc. complete.

Providing two coats of Oil bound distember of approved quality and colour over one coat of primer to the wall surfaces as directed by the Engineer at site, including cost of all materials, labour charges, scaffolding charges, lead, lift etc., complete.

Colour washing with two coats of cement paint over a coat of white cement for the exterior surfaces including cost of all materials, scaffolding, labour, curing, lead, lift etc., complete.

Supplying, Fabricating and Fixing in Position of MS fully paneled Steel Door of single leaf of required size using 40x40x6 mm MS Angles for door frame, 30x30x5mm MS Angles for shutter frame by adopting 5 Nos. horizontally, 2 nos. vertically, shutter covered with 18 Gauge MS sheet, finished neatly as directed by the Engineer at site, including cost of all materials, providing locking arrangements, holdfast, hinges, labour, lead, lifts, etc complete.

Supplying and fixing in position of 50mm dia PVC pipe of approved make and quality with ISI monogram as directed by the Engineer in charge for sewer pipes including cost of all materials, all specials such as Tees, Elbow, bends and gratings, wooden plugs etc., making holes in masonry/concrete, restoring the disturbed area to original condition, making water tight jointing with no leakage,personal protective equipments, other safety appliences such as helmets,shoes, safetyglass, hand gloves, etc labour, lead, Lift, T&P, etc., complete

Dismantling the RCC floor and clearing of debris to a faraway place including cost of all materials, labour charges, T&Ps, finishing the dismantled surface neat and devoluting the scrap rod to the central stores,transporting charges, lead, lift, etc complete

Providing and placing of PCC 1:2:4 using 20mm HBG metal as directed by the Engineer at site including cost of all materials,all labour charges,shuttering,curing, leads & lifts etc., complete.