Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.5 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹46.6 L+₹16,282.94 (0.35%)Rejected-Finance MINISTRY OF DEFENCE MES JALPAIGURI WEST BENGAL | L2 | Rejected-Finance Lot Lowest | |
| 3 | L3₹47.7 L+₹1.3 L (2.73%)Rejected-Finance | L3 | Rejected-Finance Lot Lowest | |
| 4 | L4₹48.3 L+₹1.9 L (4.16%)Rejected-Finance BIDHAN PALLY OODLABARI P O MANABARI P S MALBAZAR DIST JALPAIGURI | JALPAIGURI | L4 | Rejected-Finance Lot Lowest | |
| 5 | L5₹53.8 L+₹7.4 L (15.8%)Rejected-Finance | L5 | Rejected-Finance Lot Lowest |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
5 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
PROVN OF CERTAIN REVENUE WORKS AND MINOR WORKS AND SPECIAL REPAIR TO BLDG NO HA 183 AND HA 184 AND HA 80 AND 3 NOS STATIC WATER TANKS AT BAGRAKOTE UNDER GE SEVOKE ROAD
2022_MES_558881_2
GE/SEV/46 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹96,000
Yes
15 Dec 2022
12 Nov 2022
7 Dec 2022
12 Nov 2022
5 Dec 2022
21 Nov 2022
13 Nov 2022 - 17 Nov 2022
Amount
Excavating in trenches not exc 1.50m wide and n.exc 1.50m in depth in hard/dense soil and getting out complete all as specified and as directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed.
M&L for brick work with fly ash bricks straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for Brick work with fly ash bricks as in half brick thick wall built in CM (1:4), complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L hardcore of broken stone or boulders of gauge not exceeding 63/100 mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded mechanically crushed stone aggregate) as sub base of flooring complete all as specified and directed.
M&L for 50mm thick PCC (1:4:8) type D-2 (using 40mm graded mechanically crushed stone aggregate) as sub base of flooring complete all as specified and directed.
M&L for 40mm thick PCC (1:2:4) type B0(using 12.50mm graded crushed stone aggregate) as in DPC to horizontal or verticle surfaces including necessary formwork complete all as specified and directed.
M&L RCC M-20, 1:1.5:3 (nominal mix), 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span and lintel band, roof band and other similar items including form work all as specified.
Use and waste of formwork for rough finished flat surfaces to edges of concrete flats, break in floors, openings in concrete wall, floors and roofs and sides RCC/PCC bands in walls horizontal or sloping and similar works exc 20 cm wide complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incuding cranking, bending spirally for hooping for columns, hooking ends and binding with and incuding mild steel wire (annealed), not less than 0.9mm dia or securing with clips complete all as specified.
All as per item No.13 above but 5 mm dia and over up to and including 10 mm dia as in stirrups, spacers and binders complete all as specified and as directed.
S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc( Fe 410-W Gde-E-250) quality A Including preparation of surface and one shop coat of zinc chromate primer at contractors workshop before fabrication complete all as specified and directed by Engineer-in-Charge..
S&F Steel ventilators with top hung shutter including hinges,steel peg stay, and including one coat of red oxide complete all as specified.
S&F 3mm thick glass sheet ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane all as specified & directed.
S&F mild steel screw bolts, 5 to 10mm dia machine made with hexagonal head at one end screwed the other or screwed both end, each screwed end to be fitted with washer and one hexagonal or square nut exceeding 05cm and not exceeding 10cm long complete all as specified.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
M&L for rendering 20mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including mixing WPC as per manufacturers instruction, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured seperately.
M&L rendering 15mm thick in CM 1: 6 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.
Supply only liquid water proofing compound complete all as specified and as directed.
M&L for rendering in CM (1:4), 10mm thick on fair faces of brick work or concrete surfaces for fixing of wall tiles complete all as specified and as directed.
M&L for glazed ceramic coloured tiles on vertical surface 450X300X7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
M&L for screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finishes complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
M&L 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection & paving finished even & smooth without using extra cement complete all as specified and as directed.
M&L for mild steel round bars, 6 mm dia, as in reinforcement to half brick wall (two Nos in every fourth course of half brick wall) complete all as specified and as directed.
S & F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing complete all as specified and directed.
S&F stainless steel butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.
S&F aluminium anodised handles of 150mm size, fabricated type of extruded section fixed with screws to shutters, complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section, 150mm long, complete all as specified and directed.
S&F vitreous china squatting pan "ORISSA" pattern of size 580x440mm white with and including 'P' or 'S' trap, with integral foot rests (excluding flushing cistern & flush pipe) including provision of lime concrete bedding and connecting up, complete all as specified and directed.
S&F (EWC) Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) incl all fittings complete and fixing to flush pipe and outlet pipe complete all as specified and as directed
S & F flushing cistern, 10 Ltrs. Capacity, PVC valveless, syphonic action type with dual flushing system, low level,white with inlet, ball valve,float and handle including brackets and flush pipe of polyethylene PVC 32mm dia, complete all as specified and directed.
S&F PVC connection pipe 15 mm dia, 450 mm long with PTMT nut complete all as specified and as directed
S&F 32mm bore high density polyethylene pipes (LDPE) of pressure rating 6 Kgf / cm2, fixed to walls, ceiling or laid in floors etc, complete all as specified and directed.
S&F 15 mm dia GI pipe medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
S& F 15 mm bore bib tap cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
S& F 15 mm bore angle stop valve cast copper alloy , , fancy type, chromium plated with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
S&F health faucet (ABS bosy) Mild steel chromium plated suitable 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
S&F 2-in-1 Bib tap chromium plated fancy type complete all as specified and as directed.
Preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed
S&F PVC (SWR) floor trap dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.
S&F Rotational moulded polyethylene water storage tanks 1000 Litre capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including provision of necessay fittings for connection the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F 20 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
M&L for 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.
S&F 25 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
S & F 110 mm bore PVC (SWR) bends complete all as specified & directed.
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixd to walls complete all as specified and as directed
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed
M&L for cement concrete 1:4:8 type D-2 Concrete bed to drain pipes 110 mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed.
Excavation over areas not exceeding 1.5m deep and getting out in hard/dense soil complete all as specified and as directed
All as per item No 55 above but exceeding 1.5m deep and not exc 3.0m in depth getting out in hard/dense soil complete all as specified and directed.
M&L PCC 1:3:6, type C-2 (using 40 mm graded crushed stone agg) as in foundation, filling and mass concrete complete all as specified.
M&L for Sand filling under floors including watering and consolidation as in sand cushioning for interlocking paver blocks complete all as specified and directed.
S&F Modular Septic Tank of Capacity 9500 Ltrs (30-50 Users) (plastic septic tank) vertical design tank type includng all accessoried and lowering into position and fixed to inlet and outlet pipes complete all as per manufacturer instructions and directed by Engineer-in-Charge. Make:- Supreme/ Sintex Plastics/ Aqua tech.
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5m in depth for foundation, shafts, wells, cesspits, manholes, pier holes, cable and pipes, etc and getting out in soft / loose soil complete all as specified and as directed.
All as per item No 60 above but depth exc 1.5m n exc 3.00 m complete all as specified and as directed.
M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all specified and directed.
M&L for brick work with sub class 'B' bricks in one and half brick thick honey comb walling built in cm 1:4 complete all as specified and directed.
M&L for RCC M20 1: 1.5 : 3 type A1 (Nominal Mix) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping for rough finished flat surface) complete all as specified and directed.
M&L for loose filling with broken brick bats of guage 80 to 150 mm in soakge pit/soakge well complete all as specified and as diected.
S&F CI manhole cover 600 mm dia medium duty all as specified and as directed.
M&L 150mm internal dia of salt glazed stone ware drain pipes grade A laid in trenches and jointed complete all as specified and as directed.
M&L for moorum/red bajri filling in floor or paving laid in layers n exc 15 cm thcik spread levelled and blinded with earth and rammed including watering complete all as specified and as directed.
S&F 100mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
S&F Brass chromium plated shower rose 125mm size complete all as specified and as directed
Supply and fixing CP soap dish fixed to wall with screws complete all as specified.
S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed
S & F 75 mm bore PVC (SWR) Vent cowl complete all as specified & directed
S&F Modular Septic Tank of Capacity 2000 Ltrs (9-10 Users) (plastic septic tank) vertical design tank type includng all accessoried and lowering into position and fixed to inlet and outlet pipes complete all as per manufacturer instructions and directed by Engineer-in-Charge. Make:- Supreme/ Sintex Plastics/ Aqua tech.
S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and directed.
M&L for 40mm thick cement concrete 1:2:4, Type B-1 (using 20mm graded crushed stone agg) as in floors finished even and smooth without using extra cement complete all as specified and as directed.
S&F 25 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.
Cutting & screwing existing water pipe line mains 25mm bore and connection with new pipe line laid including necessary fitting required at site complete all as specified and as directed.
Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting any gauge or thickness as in roof covering complete all as specified and as directed.
Dismantling timber scantling 40 Sqcm and over in section in any position as in framed works complete all as specified and as directed.
S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410 W Gde-E 250) Quality A complete all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F mild steel work (miscellaneous) as in wind ties for roof, flat iron fillets (for securing wire mesh etc) including drilling holes for securing bolts and fixed with bolts and nuts etc and similar work conforming to Fe-290.Gde-E-165, complete all as specified and as directed.
Taking down chowkats with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each including guard bars complete all as specified
Taking down chowkats with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete with glazing bars, dovetailed or welded complete all as specified and directed.
All as per item No 89 above but without glazing bars complete all as specified and as directed.
S&F pressed steel frames (Size-165X60mm) for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete all as specified .
M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in block for hold fast, filling in frames, copings or similar work and finished the surface with existing including form work complete all as specified and as directed.
S&F factory made 2nd class hard wood rail and style 35mm thick plain framed, panelled shutter (two panel ) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F factory made 35mm thick 2nd class hard wood (Hollock/Sal/Kalasiris), Kiln seasoned and chemically pressure treated, glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges, of framing plain, chamfered or rounded, fitted with cut and mitred bends for securing glass etc, sizes of members of shutters as specfied in SSR Part I, Section 8, cluase 8.24 (a) ; supplied and fitted to chowkats complete all as specfied and directed.
S&F aluminium anodised barrel tower bolts of extruded section, 200mm long, complete all as specified and directed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy complete all as specified and directed.
S&F stainless steel wire cloth, 0.40mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
Dismantling wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified
S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)
M&L Preparing of new non AC board surfaces and applying three coats of white wash on ceiling complete all as specified.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above GL) complete all as specified
S&F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to steel trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles Fe-290 Gde-E-165 complete all as specified and directed.
Demolition of brick work built in cement mortar or including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles.
M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all specified and directed.
M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all specified and directed.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified
M&L for preparation of new plaster surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting on walls complete all as specified and as directed
M&L for preparation of new or untreated surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed
M&L for preparation of new untreated wood and wood base material of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation new steel surfaces of any description over 10cm width of grith and applying two coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description, n.exc 10cm in width or grith, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. Note : Screed base shall be measured and paid seperately.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. Note : Screed base shall be measured and paid seperately.
M&L for 40 mm thick cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregated) as in sub base of floors and paving etc complete all as specified.
M&L Mild steel bars 6mm dia to 8mm dia, cut to length, bent to shape required including cranking, bending sprirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L 100mm thick cement concrete 1:3:6 type C2 (using 40mm grade stone aggregate) as in paving finished even & smooth using extra cement. complete all as specified and directed.
S&F pressed steel frames (size-105X60mm) for doors with one rebate incl necessary fixing lugs, hinges, lock strike plate etc including providing one shop coat or red oxide zinc chome primer complete all as specified .
S & F flush sutters, 30mm thick solid core contruction, with block board core and plywood face panels,commercial type on both sides complete all as specified and directed.
S&F Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) 0.56mm thickness as in fixing for door bottoms complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section, 200mm long, complete all as specified and directed.
S&F 300 mm aluminum anodised sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy, complete all as specified and directed.
M&L for 25 mm thick cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregated) as in sub base of floors and paving etc complete all as specified.
M&L for screed bed or bedding layer of cement mortar 1:6, 20mm thick for laying floor finishes complete all as specified and as directed.
M&L100mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection & paving finished even & smooth without using extra cement complete all as specified and as directed.
M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.
All as per Item Sl No -125 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.
All as per Item Sl No - 125 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.50 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.
S&F Switch piano flush type, single pole, one way, 5/6Amp complete all as specified and as directed.
S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all specified and as directed.
S&F LED tube light fitting 20 watt 4 feet with Al extruded batten luminaire for 230 volt AC all as directed by EIC.
S&F new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium building security light with high power LED as light source lamp type 25 w with SPD , IP-66 protection with toughened glass including fixing pipe/saddle complete all as specified and as directed.
S&F LED tube light fitting 09 watt 2 feet with Al extruded batten luminaire for 230 volt AC all as directed by EIC.
Supply and fixing DB with sheet metal enclouser 240 volts,04 way with rated bus bar single pole & neutral double door for MCB, including cutting chases for DB of required size and making good disturbed surface area and putting blanking plate if required including taking down old unserviceable one complete all as specified and as directed.
S&F MCB, SP, 10 KA, 230 V. "C" curve, 06-32 A , ISI marked complete all as specified and directed
S&F MCB, DP, 10 KA, 415 V. "C" curve, 06-32 A , ISI marked complete all as specified and directed
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead including common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.
Taking down carefully copper/Aluminum point wiring light fan, socket or power complete (fittings such as switches ceiling roses pendants, regulators, sockets, sketch light fittings, tube light fittings etc. to be measured separately if found serviceable) and removing unserviceable materials from site of work and segregating serviceable materials for safe custody and making good to disturbed surfaces of walls, floors, etc. including disconnecting of ceiling fan/exhaust fan complete all as directed
Takin dopwn old unserviceable main switch DBs consisting of MCB wooden/GI/MS sheet board energy meter etc for kept in store and later use complete all as specified and directed.
M&L for Switch Socket combination, 2-in-1, 3 pin, 5/6 Amps flush type complete all as specified and as directed.
S&F Switch Socket combination, 5-in-1, 5/16 Amps flush type complete all as specified and as directed.
Taking down existing u/s FTL light fitting and S&F LED Tube light fitting 20 watt 4 feet with Al extruded batten luminaire for 230 volt AC all as directed by EIC.
Supply and fixing DB with sheet metal enclouser 240 volts, 08 way with rated bus bar single pole & neutral double door for MCB, including cutting chases for DB of required size and making good disturbed surface area and putting blanking plate if required including taking down old unserviceable one complete all as specified and as directed.
S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep 120 watt complete all as specified and as directed.
Supply and laying in trenches/wall LT UG XLPE insulated,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 6 sqmm 2 core including making necessary connections all as specified and directed.
Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. Note:- Punned thickness shall be measured.
Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.
Supply and fixing GI pipe 25mm bore light grade for cable protection complete all as specified and as directed.
Cutting & screwing existing water pipe line mains 20mm bore and connection with new pipe line laid including necessary fitting required at site complete all as specified and as directed.
Supply & laying in trenches GI pipe 20mm bore medium grade including fittings complete all as specified.
Supply & laying in trenches GI pipe 25mm bore medium grade including fittings complete all as specified.
Supply and laying in trenches/wall LT UG XLPE insulated,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 sqmm 2 core including making necessary connections all as specified and directed.
Supply and fixing GI pipe 40mm bore light grade for cable protection complete all as specified and as directed.
Supply and fixing gun metal gate valve 20 mm bore, iron wheel head, screwed both ends for iron pipes of size 20mm bore complete all as specified.
Taking down old u/s ceiling fan and refixing same after rewiring of building complete all as specified and as directed.
Supply and fixing LED luminaire 600mm x 600mm , 32-42 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.
NARAYAN MAJUMDER
M/S Bikash Saha
RAJIV DEY SARKER
NARESH GUPTA
AJOY PAUL
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .