INTERNAL PERIODICALS, MISC B/R WORKS OF ARMY HQ PROVOST UNIT, ASSU UNIT, IHQ OF MOD (ARMY), CIU MESS, DAPS I, OTHER ADJOINING AREAS OF AGE B/R-II INCLUDING PETTY REPAIR MISC E/M WORKS AT CHURCH ROAD, GYM ROAD, KANDHAR LINE, 61 CAV, 48 MVH,SQAE,B.

Amount

Easing of door/windows shutters for easy closing or opening leaf tightening of hinges or changing the position of hinges adjustment of tower bolt, sliding bolt size exc 1 sqm but n exc 2 Sqm etc complete all as specified.

Preparation of old decorated surface (plastered or unplastered) of walls incl cornices pillar etc by brooming down or steel wire brushing scraping down smoke root mould moss and efforesceent salts and treating oil and greasy spots as applicable and applying one coat of white lime wash on walls surfaces all as specified and directed.

M&L for Preparation of old painted surfaces of wood based surfaces of any description over 10 cms width or girth using paint brush by applying sand paper etc.for proper preparation and applying one coat of synthetic enamel paint brush all as specified and directed.

M&L for Preparation of old painted surfaces of steel of any description over 10 cms width or girth by using sand paper etc.for proper preparation and applying one coat of synthetic enamel paint all as specified and directed.

M&L removing existing old treatment from walls using mechanical grinder complete all as specified and directed.

M& L for prepration of old surface and applying a uniform thickness (average 2-3mm thickness) of cement based wall care putty of approved to the entire surface of walls surfaces finished even and smooth complete all as specified and directed.

M& L for applying two coats of Oil Bound Distemper on wall surfaces to give an even and smooth surface all as specified and directed.

M& L for applying one coats of Oil Bound Distemper on wall surfaces to give an even and smooth surface all as specified and directed.

M&L for 5mm thick rendering in cement mortar 1:3 finished even and smoothe surface without using extra cement on ceiling, chajja in double storey building etc incl taking down incl two coats of white wash complete all as specified and directed by Engineer-in-Charge

M&L for 15mm thick rendering in cement mortar 1:6 finished even and smoothe surface without using extra cement on wall in double storey building etc incl taking down and apply two coats of OBD complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old surfaces of walls and applying two coats of cement based paint all as specified.

Complete removal exising old surfaces of wall / ceiling by scrubbing with hard brushing ,brooming down or steel wire brushing scraping down smook root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water and applying Two coats of weather proofing exterior acrylic emulsion paint of DULUXWeather shield Max or APEX ULTIMA from Asian paint over one coat of primer from the same manufacturer complete all as specified and directed.

S&F drappery curtain rods stainless steel 25 mm nominal dia of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod complete all as required and directed.

Cleaning and removing all scales and dirt etc. of the tank by scrapping with hard plastic/nylon wire brush and washing it with bleaching powder solution and thereafter washing the same with clean water from service water tank and mouth of circulating pipe of capacity of tank upto 1000 litre complete all as specified and directed by Engr-in-Charge.

S&F in repairs 300mm long aluminum alloy anodised sliding door boll with hasp staple balt-type and fixing clips of sheet case or extruded sections and fixing bolls and sliding bolls extruded sections or case aluminum alloy complete all as specified and directed.

S&F in repair 150mm long extruded alumiunium alloy handle fabricated type anodized (D type) complete all as specified and directed.

S&F in repair 150 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter complete complete all as specified and directed.

S&F in repair to cupboard (Kitchen) area n exc 1 Sqm incl easing of cupboard shutters tightening of piano hinges fixing of handle/knob, hasp and staple etc (one unit self comprise of one CB irrespective of Nos of shutters).complete all as specified and directed

S&F in repair floor door stopper (150mm) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor in repair ,all as specified and directed by the Engineer in charge.

S&F in repairs continous piano hinges, mild steel bright finish or electro galvanized width of flap 30mm when open fixed with steel screws complete all as specified.

S&F in repairs 40 mm dia cup board knob fixed with nut screw and washer of mild steel bright finish.complete all as specified and directed

S&F in repair MS 300mm size, door spring ordinary rat tail rod pattern springs (ISI marked) including roller and roller plate complete.all as specified and directed

S&F in repair 100mm long aluminium anodized hasp and staple fixed with mild screws to shutters complete all as specified.

S&F in repair Prelaminated particle board 18/19 mm thick , exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and providing continuous Piano hinges, bright finish stainless steel, width of flaps when open 30mm with suitable size steel screws complete all as specified and directed .

Taking down chowkhats or frames n exc exc 1.5 Sqm (without taking off shutters from the frame)

Taking down chowkhats or frames exc 1.5 Sqm but not exc 4 Sqm(without taking off shutters from the frame)

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each, complete all as specified.

M&L for second class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including treating the back of chowkhat with two coat of black japan/bituminiuos paint complete all as specified and directed.

M&L for 35 mm thick 2nd class hard wood glazed and Skelton door shutter, factory made, open rebated and prepared to receive glass/gauge etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitered beads for securing glass/gauge etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat(incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one stopper and two nos 300 mm long Aluminum Sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer) complete all as specified and directed by Engr-in-charge

S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face panel, commercial type on both sides. Flush shutters shall have teak wood edging as specified in IS (incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one stopper and two nos 300 mm long Aluminum Sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer), complete all as specified and directed by Engr-in-Charge

S& F 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b); supplied and fitted to chowkats (incl two nos 100 mm long extruded aluminium tower bolts, two nos 75mm long medium weight MS butt hinges, 01 nos 125 mm long extruded aluminium handles and two coats synthetic enamel paint along with one coat of pink primer) all as specified and directed.

S&F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including aluminium alloy Powder coated standard 10mm section window grill as per approved sample and as per IS specifications joining cleat for fixing etc. complete all as specified

S&F Powder aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.) complete all as specified. Note :- The quoted rate shall include glass, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized iron staples including wooden beadings, complete all as specified and directed.

S&F 4.00 mm thick plain glass, pin head type and glazing with wooden beads, glass putty, PVC beading, aluminium beads, complete all as specified

M&L for dismantling tiles laid dry or pointed of any size and thickness in walls and floors and complete removal of debris outside MOD land complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes of cement plaster 1:6 complete all as specified and directed.

M&L for coloured ceramic tiles (Non skid) of size 300x300x 6 to 7mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured complete all as directed.

S & F for coloured Non - skid Ceramic tiles 6 to 7 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm ( size 400 mm x 400 mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified and as directed.

All as per item No 39 above but to 10mm thick on rendering surface in CM 1:4 on vertical surfaces of wall as in skirting including screed/plaster on walls complete all as specified & directed.

M & L for 600x600x08 to 09mm thick coloured vitrified tiles(joint less) (make of tiles as approved by GE)as in floor over, including pointing in coloured cement to match the shade of tiles including cleaning with water and applying cement slurry @ 3 kg/sqm on prepared surface of floor and including cutting/adjusting of existing door shutter at required height after taking down and refixing complete all as specified directed.

All as per item No 41 above but to 10mm thick on rendering surface in CM 1:4 on vertical surfaces of wall as in skirting including screed/plaster on walls complete all as specified directed by Engr-in-Charge, and approved by GE all as directed.

M&L for coloured glazed ceramic tiles 300x600 x 6 to 7mm thick as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M & L for 15mm bore GI tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc incl, cutting chases in wall where ever required and then making good including dismantling of old GI tubing complete all as specified and directed.

M & L for 20mm bore GI tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc incl, cutting chases in wall where ever required and then making good including dismantling of old GI tubing complete all as specified and directed.

M & L for 18-20 mm thick Granite stone work (table rubbed and polished) over and including15mm thick Screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished including dismantling the existing stone slab with screed/ backing and removal of debries out side the MOD Land complete all as specified and as directed by the Engineer-in-Charge.Note- The cost of making hole for Gas pipe in cooking plateform is included in unit cost of item and nothing extra shall be paid on this account.

S&F in repairs vitreous China coloured European type WC with "P" or "S" trap for 100 mm bore , including connection to rain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete complete all as specified .

S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 580mm x 450mm complete including , CP Waste couppling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified.

S&F in repairs chromium plated toilet paper holder, complete all as specified.

S&F in repairs chromium plated soap dish, complete all as specified.

S&F in repair plastic water closet seat cover/white closed pattern with flat bottom and cover and mild steel C hinges as per ISI.

S&F in repair stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe including connecting union overall size 1145mm x 510mm x 200mm with bowl size 510mm x 400mm x 200 mm including taking out existing Complete including fixing of granite slab with and including providing suitable size groove for adjusting top level ,moulding of slab each side and polished all as specified.

S & F in repairs 15 mm dia Brass CP three-in-one wall mixer for mixing hot & cold with L band water screwed down for iron pipe and fixed complete all as spd.

S & F in repairs 15 mm dia Brass CP mixer long Neck for sink mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified.

S & F in repairs 15 mm dia Brass CP WHB Mixer for mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified .

S & F PVC connection pipe of 15mm size with PTMT check nuts with washers of length 450mm, complete all as specified.

S&F in repairs angle valve 15mm dia fancy type chromium plated all as specified and directed by the Engr-n-charge .

S&F in repair 15mm dia CP bib tap fancy type chromium plated .

S&F in repairs aluminium peg set of 6 peg, 45 centimeter long, complete all as specified.

S & F in repair brass chromium plated towel ring including a pair of CP brass bracket coplete all as specified and directed.

S & F in repair Glass Corner Shelf 10mm thick including CP railing radius 300mm radius complete all as specified and directed by the Engineer-in-Charge.

S&F in repair Health faucet, CP brass with 1.50m long flexible pipe 15 mm bore of pipe screwed for iron pipe fancy pipe all as specified and as directed.

S&F in repairs Glass shelf assembly 450mm long 150mm wide with cp railing complete all as specified and as directed.

S&F in repairs CP brass shower rose 125mm size suitable for 15mm bore pipe with C P arms complete all as specified.

Demolition of cement Concrete pavings exc 15 cm thickness (below or above ground level) for EWC & IWC removing out cinder/ concrete from sunken portion and and (a) M & L for sunken portion filled with Cinder or 40mm graded brick bats over finished with 50mm thick PCC 1:2:4 type B1 with water proofing compound including applying 2 layer of 85/25 Bitumen @ 1.20 Kg/Sqm each coat all as specified and directed (b) M & L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete Plus as specified .(c) M & L for providing 50 mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(d)Filling of sunken with brick bats as per requitrement.(e) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.all as specified and directed.Note : IWC/EWC Shall be measured and paid under relevant items seperately

S&F false ceiling using plain galvanised steel ceiling system consisting of 600X600 mm lay in tiles of pre coated galvanised steel sheet 0.5mm thick in white or coloured to be laid on grid system with 15mm wide T section of size 600 X 45 X 15 mm flanges having rotary stiching on the main runner. The main runner spaced 600 mm centre to centre flush fitting 600 mm long cross tees to be interlocked between runner at 600 mm centre to from 600X600 mm module perimeter trim to be wall angle of size 3000 X 45 X 15 mm secured to wall and including suspension system as per manufacturer instruction including dismantling complete all as specified and directed.

M&L for 8.5mm thick prelam PVC coloured profile panelling with all thickness of 1.25mm each pannel 250mm wide with interlocking joints, coloured, shade, pattern/ designs approved fixed to walls or ceiling with solvent /screw including similar pattern moulding at all around of openings, junctions including dismantling complete all as per manufacturer instruction and all as per specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20 mm thick screed bed in CM 1:6 and rounding of edges, rubbing and polishing complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engineer-in-Charge.

S & F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.

Preparation newly or previously untreated steel surfaces of any description over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide complete all as directed.

S&F in repairs pre painted galvalume aluminum ZINC coating GI base corrugated steel 0.5mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screw with minimum 150mm end lap and one corrugation side lap sheets complete all as specified and directed.

Excavating in posts holes (or similar holes) in soft/loose soil each n.exc 0.50 Cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm complete all as specified and directed.

M & L Cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) in foundations, filling and mass concrete as in sub base all as specified.

M & L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4(1 cement: 4 coarse sand) furrowing the under layer with scratching tool and applying cement slurry on the under layer @3g of cement per square metre, top layer 15mm cement plaster 1:1/2:2(1 cement :1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and wasshing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately).

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of penels and finishing the groove complete as per specifications and direction of Engineer-in- Charge.

Checking electrical points for continuous electric supply system and replacement of unserviceable spares for all electrical fixtures, ceiling/exhaust fans of any size and capacity and carrying out minor repairs, fixing screws, tightening of loose wires, any type renewal of small pieces of electric wire as per suitable length and maintenance work complete on all working days including Sunday & holidays all as directed by Engr-in-charge. Note : Item ser No 81 to 125 and 134 to 144 come under this complaint.

Attending to Geyser complaints at site including checking and rectification of any electric fault/ water leakage and making good in all respects including minor repairs, replacement of unserviceable spares, burnt copper wire connections wherever required and repairing any type of switch, socket, plug top etc complete all as specified and directed. Note : Item ser No 126 to 133 come under this complaint. Notes for Item No. 79 and 80 Supply only in repairs spares shall be measured and paid under relevant item (b) Contractors are advised to visit the sites before quoting their rates. (c) Materials for minor and maintenance repair works as directed by Engineer-in-Charge shall be supplied by the contractor within one week from the date of issue of work order. (d) Contractor shall provide and deploy adequate experienced Exp. professional to carry out day to day complaints and tradesman will remain present in mention area Complainet Cell from 9:00Hrs to 1700 Hrs from Monday to Sunday (01 Electrcian & 01 Helper) . In case of any breakdown/ emergency, contractor shall make arrangement to attend and rectify the complaints in odd hours on sunday/ holiday also. The rates quoted in scdule, respective items shall be deemed to be included and nothing extra shall be admissible on this account.Note:whatever be the nature of electrcal complaint the wholesole rectification responsibilty lies with the contractor. (e) Contractor shall be penalised @ Rs. 100/- per complaint per day, if he fails to attend the complaint within 8 hours. (f) All Ser Numbered complaints dockets will be provided by the contractor amount of dockets include this. (g) Daily attendance register will be maintained by the concerned JE E/M if any electrician/helper found absent on ony working day then penalty @ Rs 1000/- per day per workman will be recovered from the contractor.

Supply only in repairs in repair switch piano flush button type single pole one way 6 Amps all as specified.

Supply only in repairs in repair switch piano 6 amp SP two way, ISI marked.

Supply only in repairs in repair socket piano outlet 6 Amp flush button type all as specified.

Supply only in repairs in repair switch piano flush button type single pole 16 Amps.

Supply only in repairs in repair socket piano outlet, 2 in 1, 3 pin 6/ 16 Amp Flush type single pole.

Supply only in repairs in repair bell push single pole 6 Amps all as specified.

Supply only in repairs in repair Ceiling fan regulator electronic step switch type/socket type, suitable for 1200/1400 mm sweep ceiling fan, 230 Volts single phase complete.

Supply only in repairs in repair switch Modular type 6 Amps one way 230V AC complete all as specified and directed by Engineer in charge.

Supply only in repairs in repair switch Modular type 6 Amps two way 230V AC complete all as specified and directed by Engineer in charge.

Supply only in repairs in repair Modular Bell push button SP with indicator 6 Amps, 1 module 230V AC complete all as specified and directed by Engineer in charge.

Supply only in repairs in repair Modular socket outlet 5 pin 6 Amp socket 2 moduler complete all as specified and directed by Engineer in charge.

Supply only in repairs in repair switch Modular type 16 Amps one way 230V AC complete all as specified and directed by Engineer in charge.

Supply only in repairs in repair Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge.

Supply only in repairs Modular five stepped type electronic fan regulator 1/2 module 230V AC complete all as specified and directed by Engineer in charge.

Supply only in repairs ceiling rose surface PVC type with three terminals.

Supply only in repairs Electric bell Ding-Dong AC 230 Volt etc complete all as specified and directed.

Supply only in repairs insulated body, angle holder (metal ring) with back plate ISI marked complete all as directed.

Supply only in repairs industrial metal clad, plug top, 3 pin, 10 Aamp (ISI marked) as directed.

Supply only in repairs industrial metal clad socket 3 pin 20 Amp (ISI marked) as directed.

Supply only in repairs relacement plug top 6 Amps 3 pin 230- volts.

Supply only in repairs relacement plug top 16 Amps 3 pin 230- volts.

Supply only in repairs LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, > 2400 systems lumen outputwith lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply only in repairs LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1000 lm with life time of 25000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.

Supply only in repair LED 9/10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 25000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6000K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply only in repairs surface ceiling mounted, round LED down light fitting 12 watts with die cast aluminium housing and system wattage of 12W, system efficacy at luminary level ≥ 80 Lumens/watt, 25000 burning hours, 6500K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply only in repairs in replacement recessed mounting LED FLAT panel 2"x2" made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20 Suitable for 36 watt,230 volts ,50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete all as specified and directed.

Supply only in repairs in replacement of decorative type wall mounted luminaire (Comet) with unbreakable poly carbonate materials suitable for 1x14 watt LED bulb B22 base.

Supply only in repairs 14W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz

Supply only in repairs 9 W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz,

Supply only in repairs MCB SPN 40 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply only in repairs MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply only in repairs MCB DP 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply only in repairs MCCB 160 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting.

Supply only in repairs MCCB 125 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting.

Supply only in repairs MCCB 100 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting.

Supplu only in repairs fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge.

Supply only in repairs exhaust fans AC single phase 230/240 V of size 300 mm sweep, Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, heavy duty, metal body with louvers for fixing of exhaust fan complete.

Supply only in repairs PVC Gang box surface type heavy duty suitable for single switch 6 Amps (ISI Marked) .

Supply only in repairs Gang box surface type heavy duty suitasble for 15 Amps switch and socket (ISI Marked)

Supply only in repairs replacement white cover plate with frame 1 module/ 2 module complete all as specified and directed by Engineer in charge.

Supply only in repairs replacement white cover plate with frame 3 module complete all as specified and directed by Engineer in charge.

Supply only in repairs replacement white cover plate with frame 6 module complete all as specified and directed by Engineer in charge.

Supply only in replacement in repair hylum sheets 3 mm thick (ISI marked) of the following sizes :- Make :-As per sample.

Sheet 4" x 4" single cutting suitable for one piano switch

Sheet 4" x 4" two cuttings suitable for two piano switches

Sheet 4" x 7" three cuttings suitable for three piano switches

Sheet 4" x 7" one cutting for 6 Amp socket and two cuttings for piano switches

Sheet 8" x 10" incl cuttings for switches and sockets 6/16Amps as directed.

Sheet 10" x 12" incl cuttings for switches and sockets 6/16Amps as directed.

Supply only replacement of capacitor 3.15 Mfd, 240 V complete all as specified and directed.

Supply only replacement of capacitor 1.5 Mfd, 240 V complete all as specified and directed.

Supply only replacement hole fastner madeup of MS 6" long with complete nut bolt all as specified.Make:as per sample

Supply only replacement hole fastner madeup of MS 4" long with complete nut bolt all as specified.Make:as per sample

Supply only replacement heating element of 2 KW any type with nut bolt washer complete all as directed.

Supply only replacement heating element of 1.5 KW any type with nut bolt washer complete all as directed.

Supply only in repairs non return valve 15mm dia (ISI Marked) for geysers of 50/35/25 Ltr capacity including GI Socket,Nipple, elbow ,bend etc and connecting up complete all as directed.

Supply only in repairs for safety pressure valve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge.

Supply only replacement thermostat for 25/35/50 ltrs capacity of geysers complete all as directed.

Supply only in repairs SS braided pipe of 12 mm ((internal) suitable for hot/cold water, 60 cm long with brass nuts and rubber washers complete all as specified and directed.

Supply only replacement FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 1.5 sqmm with approved colour code completed all as specified.

Supply only replacement FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 2.5 sqmm with approved coloured code completed all as specified.

Supply only replacement FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 4 sqmm with approved coloured code completed all as specified.

Supply only replacement FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 6 sqmm with approved coloured code completed all as specified.

Supply only replacement FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 10 sqmm with approved coloured code completed all as specified.

Supply only in repairs replacement copper cable flexible 3 core PVC insulated of size 23/.0076 ll as specified and directed by Engr-in-Charge

Supply only in repair wall fan 400 mm 3 blade in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site complete all as specified and directed by Engineer-in-Charge.

Supply only in repairs ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed.

Supply only in repairs 35 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie > 100lm/W with a life class of 25,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete.

Supply only replacement exhaust fan motor capacity 1/4 HP 230 volts suitable for 300 mm size exhaust fan complete all as directed.

Supply only in repairs fresh air fan motor 230 volts AC, 50 Hz suitable for 250 mm size ftesh air fan complete all as directed.

Schedule of Credit

A R S CONSTRUCTION CO (BID ID -3417422)

M/S Sunil Steel Works (BID ID -3420426)

kailash chawla (BID ID -3420455)

M/s M M BAHL (BID ID -3427040)