Repair of 02 nos. existing Toilet blocks consisting of 04 Nos. toilet and 02 Nos. bathrooms with running water facility

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacture), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in while cement mixed with pigment of shade complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacture), of 1st quality conforming to IS: 15622, of approved make, in all colours, shades, except White, Ivory, Grey, FUME Red, Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 coarse sand), joining with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc. complete.

Dismantling W.C. pan of all sizes including disposal of dismantled materials i/c malba all complete as per complete as per directions of by Engineer-in-Charge.

Providing and fixing water closet squatting pan (Indian typeW.C. pan) with 100 mm sand cost iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whenever required. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc, complete and stacking within 50 meters lead : Of area 3 sq. meters and below

35 mm thick factory made solid panel PVC Door shutter, made out of single piece extruded solid PVC profiles, 5 mm (+ 0.2 mm) thick, having styles & rails ( except lock rail) of size 95 mm x 35 mmx5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered on both size), having one size thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40mm x 20 mmx1mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm x100mm of cross section size 35 mm x 17 mm x1 mm at each corner, single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacture’s specification and direction of by Engineer-in-Charge. Non decorative finish (matt finish)

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vittreous China Flat back wash besin size 55x400 mm with single 15 mm PTMT pillar cock.

Providing and fixing P.V.C. waste pipe for sink and wash basin including. Semi rigid pipe.32 mm dia

Providing and fixing uplasticised PVC connection pipe with brass unions.45 cm length.15 mm nominal bore