SPECIAL REPAIRS TO BLDG NO T-22 IN ISP LINE OF MH IN RA AT CAD PULGAON

Amount

Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as specified and directed .

Dismantling of timber scantlings 40 sq cm and over in section in any position, unframed work complete all as specified and directed .

S & F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed .

S & F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed .

S&F mild steel square/rectangular hollow section in structural steel confirming to IS 4923-1997 as in purlins,trusses,rafters & posts(medium grade) complete all as specified and directed .

Material and labour for framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screws, including bending and welding angles as necessary gussets plates, riverting etc n exc 10 Kg each brackets conforming to Fe-290, Gde E-165 (Brackets over 10 Kg each to be measured under structural steel all complete all as specified and directed .

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in copings on edges of parapet wall incuding necessary formwork required complete all as specified and directed .

Dismantling boarding any description as in false ceiling complete all as specified and directed .

M&L 8 mm thick designer ceiling board (Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed pipe or wall plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19x19mm of white colour all as per instruction complete all as specified & directed.

M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M&L 75 mm thick PCC 1:4:8,type D-2(using 40mm graded stone aggregate)as in sub base to flooring finished even and fair without using of extra cement complete all as specified and directed .

M/L for 75mm thick PCC 1:3:6 type C1 ( using 20mm graded stone aggregates) as in plinth protection finished even and fair without using extra cement all as specified.

M&L 40 mm thick PCC 1:2:4 type B1(using 20mm graded aggregate) as in flooring finished even and smooth with using extra cement, all as specified.

Taking down cement plaster/terrazzo finish on wall of any description hacking for key scrubbing down with water including racking out joints.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed .

Demolition of cement concrete (un-reinforced) in floors and paving not exceeding 15 cm thickness below or above ground level complete all as specified and directed .

Material and labour for brick work with old size fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 using old size bricks complete all as specified and directed .

Material and labour for rendering 15 mm thick in CM 1:6 on fair faces of the brick masonry / stone masonry surfaces and finished even and smooth without using extra cement complete all as specified and directed .

Material and labour for rendering 10 mm thick in CM 1:6 on internal surfaces incl dubbing out avreage 10mm thick in CM 1:4 and finished even and smooth without using extra cement complete all as specified and directed .

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed .

M&L for preparation of newly plastered surface of wall and applying two coats of acrylic base paint over a coat of primer complete all as specified and directed .

M&L for Complete removal of existing treatment of wall applying chalk whiting , 2 coats of oil bound distemper over a coat of primer complete all as specified and directed .

Taking down chowkats or frames with shutters (without taking off shutters) of any description exc 1.50 Sqm but n.exc 4 Sqm each complete all as specified and directed .

Taking down chowkats or frames with shutters (without taking off shutters) of any description not exc 1.50 Sqm each complete all as specified and directed .

Supply & Fixing IInd class hard wood (sal) plain solid straight chowkats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed .

Supply & Fixing 35 mm thick II class hard wood(sal) (door) plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on the both faces. The size of rail as per IS: 1003 (Pt I) kiln seasoned and chemically pressure treated complete all as specified and directed .

Supply & Fixing 35 mm thick factory made glazed and skeleton shutter of 2nd class HW(sal), open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated without sash bar as in doors, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) supplied and fitted to chowkhats complete all as specified and directed .

Supply & Fixing 30 mm thick factory made glazed skeleton shutter of 2nd class HW (sal), open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated sash bar as in window/ventilator, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(b) supplied and fitted to chowkats complete all as specified and directed .

Supply and fix 4 mm thick sheet glass ordinary quality and fixed inside with oil putty/beading n. exc. 0.5 sqm in each pane complete all as specified and directed .

Supply & Fixing galvanized mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or beading complete all as specified and directed .

Supply & Fixing 100mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed .

Supply & Fixing 75mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed .

Supply & Fixing 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed .

Supply & Fixing 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed .

Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed .

All as per item No 35 …. hereinbefore but 100 mm long complete all as specified and directed .

Supply & Fixing 300 mm aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section etc complete all as specified and directed .

M & L for applying 3mm thick wall care putty on wall all as directed and specified.(Make : Birla wall care putty/JK wall care putty/ Berger Wall care putty) complete all as specified and directed .

M & L for Preparation of new or previously untreated surfaces of wood work of any description over 10 cm in width/girth and applying one coat of synthetic enamel paint complete all as specified and directed .

Supply & Fixing mild steel 150mm ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed .

Supply & Fixing Bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required; hooks (stay) for large gates, hook & pintle hinges; large hasp & staples; hand made sliding bolts; clamps; hold fasts and similar articles confirming to Fe 290, Gde E 165 complete all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed by Engineer-in-charge.

M & L for Non skid ceramic coloured tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.06 sqm but not exc. 0.11sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over 15 mm thick screed bed (1:6) CM complete all as specified and directed.

M&L non skid coloured ceramic tiles Square/rectargolar area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm, 7 to 8mm thick.in floors over 15mm thick cement screed bed in cm 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface.

All as item no 44 here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:3 & dismantling of tiles also.

M&L glazed coloured ceramic tiles 300x200x7mm thick as in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 cm thick screed bed in CM (1:4) complete all as specified and directed .

S & F in repair machine cut cudappah stone slab 20.25mm thick polished one side for kitchen platform over cement screed base 15mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl incl rubbing and polishing complete all as specified and directed by EIC.

S&F in repair 10 ltrs PVC valveless, syphonic action type flushing cistern, low level,white with inlet ball valve, float and handle including brackets and connection to flush pipe and fixing of chain and pull or lever, if any complete all as specified.

Supply only flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern complete all as specified and directed .

S&F in repair 15 mm bore stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes complete all as specified and directed .

S&F in repairs fancy type Bib taps, cast copper alloy 15mm dia with capston head handle, screwed down, screwed for iron pipe complete all as specified and directed .

S&F in repair chromium plated towel rail 20 mm dia 'D' type incluidng fixing with screws to wall 60 cm long all as specified.

S&F in repair pillar taps 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts screwed for iron pipe.

S & F 20mm bore gun metal gate valves, with iron wheel head , screwed both ends for iron pipes complete all as specified and directed .

Taking up or down steel tubing and connections including cleaning for refixing or removal to store, bore of pipe 15 mm dia complete all as specified and directed by EIC.

All as per item 55 but for 20 mm bore GI tubing complete all as specified and directed by EIC.

S&F 15 mm GI tubing, medium grade, with all fitting and fixed complete to wall or laid in floor complete all as specified and directed by EIC.

----Ditto--- all as per item 57 above but 20 mm bore of pipe complete all as specified and directed by EIC.

Dismantling water tank exc 250 but not exc 500 ltr capacity complete all as specified and directed by EIC.

S & F PVC water tank rotational moulded polythylone water storage tank (cylindrical vertical with closed lid hoisted and fixed in position) 500 ltrs capacity complete all as specified and directed by EIC.

S & F in repair vitreous china squatting pans orissa pattern size 580x440 mm white with integral foot rests including provision of lime, concrete, bedding incl re-fixing flushing cistern and flush pipe complete all as specified and directed by EIC.

S & F ball brass valve, high pressure, with polythene float and flynuts complete, screwed for ron pipes of brass ferrules for 25mm bore of pipes complete all as specified and directed by EIC.

S&F in repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union

S&F PVC connections 15 mm size with PTMT nuts of length 450mm

S&F in repairs Vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed in repairs

S&F Solid PVC door frame of size 50mmx47mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube in opening all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (stile) consisting of frame made out of MS tubes for top and bottom nails, MS frame shall be covered with heat moulded palin colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification. (Make : Rajshree plastiwood).

S & F in repairs Solitire Range SS (304) grade Kitchen sink with drainage board over all size 914x460x203mm and Bowel size 405x354x203 x 1 mm thick (Prayag CAT PART NO 1239-D) glossy/matt finished, fixed to wall or cantilever brackets (Make : Prayag ,Blue star,Diamond or equivalent )

S&F in repairs Prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work 18/19 mm thick complete all as specified and directed .

S & F in repairs Tubular towel/curtain rod rail 20mm dia aluminium anodised complete all as specified and directed .

S& F in repair aluminium anodised bracket for towel rail/curtain rod complete all as specified and directed .

S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed .

S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed .

S&F in repairs PVC(SWR) bend any radius, 110 mm dia complete all as specified and directed .

S&F in repairs PVC(SWR) bend any radius, 75 mm dia.

S&F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent complete all as specified and directed .

Taking down carefully conceled/ casing caping point wiring copper / aluminium (light / fan / scoket) complete (with fittings such as switches ceiling rose, pendents, regulators sockets etc) and making good disturbed surface with exisitng specification all as specified and directed by Engr-in-Charge.

M&L point wiring complete with 1.5sqmm single core sheathed PVC insulated FR cable 1100 V grade multistranded copper conductor of different code of ISI marked drawn through and incl PVC casing caping of suitable size with accessories ISI marked incl PVC insulated copper cable for earth of same type and sized connected to earth dolly including provision of PVC box of suitable size for mounting switches / sockets and fan regulators etc complete all as specified and directed for the following:-

(a) One switch socket outlet three pin 5 /6 Amps controlled by one switch on independent board.

S&F switch socket combination flush type (multipurpose type) but 5A, 240V AC complete all as specified and directed including taking down old U/S one. .

S&F ceiling rose surface type with 3 terminals complete including taking down old U/S one .Make : Havells/SSK/Cona

S&F LED tube light lamp 1 x 18/20 watt retrofit including suitable size of batten complete (01 set) (single / double side connection) in existing light point all as specified and directed including taking down U/S old any type of TL fitting. Make Havells /Philips/Bajaj .

Taking down the existing UG cable of 10 Sqmm 2 core 10 RM and Relaying the same with proper excavation ,taking out of cable cover/bricks and refilling the same with new sand ,relaying of cable cover /bricks in to position and refilling of excavated soil including fixing to wall and complete all as specified and directed by Engr-in-charge.

Supply and Fix 9 Watt LED lamp retrofit type complete all as specified and directed including taking down UNSV old one. Make : Havells/ Philips/Bajaj.

M/S Ramakant Chourasia

SHREE CONSTRUCTIONS

M/s. Nikhil B Nistane

M/s VILAS RATAN MENDHE

Ankit Construction

SHRI RANI SATI TRADERS

Bidder Name

Ankit Construction

SHRI RANI SATI TRADERS

SHREE CONSTRUCTIONS

M/s VILAS RATAN MENDHE

M/S Ramakant Chourasia

M/s JAYPEE ENTERPRISES

M/s. Nikhil B Nistane