Special repairs to distribution pipe line at single officers accommodation, OTM accommodation of 36 FAD and Provision of water pipe line for GD post No. 35 and 36 at 36 FAD under GE utility Bathinda

Amount

Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for pipe line etc. not exceeding 10 sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft / loose soil complete all as specified.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified.

Removing excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified.

All as per serial item No. 04 above but for 20 mm bore GI pipe.

All as per serial item No. 06 above but for 40 mm bore GI pipe.

All as per serial item No. 06 above but for 20 mm bore GI pipe.

Supplying, Laying, jointing and testing of Steel water tubing 20 mm bore medium grade, galvanised, ISI Marked including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint fixed to walls, ceiling or under floors etc complete all as specified and directed. Note :- (i) The rate of GI fittings are included in this item and nothing extra shall be paid on this account.

Supply and fixing Gun metal globe or gate valve for 50 mm bore pipe , with iron wheel head, screwed both ends for iron pipe conforming to IS 778 - 1984 complete all as specified and directed.

Supply and fixing in repair Gun metal globe or gate valve for 50 mm bore pipe , with iron wheel head, screwed both ends for iron pipe conforming to IS 778 - 1984 complete all as specified and directed.

Supply and fixing in repair Gun metal globe or gate valve for 40 mm bore pipe , with iron wheel head, screwed both ends for iron pipe conforming to IS 778 - 1984 complete all as specified and directed.

Supply and fixing Gun metal globe or gate valve for 20 mm bore pipe , with iron wheel head, screwed both ends for iron pipe conforming to IS 778 - 1984 complete all as specified and directed.

Supply and fixing in repair Gun metal globe or gate valve for 20 mm bore pipe , with iron wheel head, screwed both ends for iron pipe conforming to IS 778 - 1984 complete all as specified and directed.

Material and Labour for PCC (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in foundation , filling and mass concrete including necessary form work complete all as specified and directed..

Horizontal boring below road surfaces/hard standing suitable for inserting pipe of suitable size including removal of surplus soil and making good disturbed surfaces complete all as sdirected by Engineer -in -Charge.

Material and Labour for Construction of valve pit Type 'B' of size 75 cm x 75 cm x 75 cm ( internal dimension ) of brick masonry built in cement mortar (1:4). from the top of surface including cover of MS sheet 3.15 mm thick and MS frame made of angle iron of size 50 mm x 50 mm x 6 mm with hinges, handle and locking arrangement including painting with two coats of synthetic enamel paint over a coat of red oxide primer and grouting in PCC (1:2:4) type B-1, using 20 mm graded crushed stone aggregates , Rendering 15 mm thick in cement mortar (1:3), including three coats of white wash on internal surfaces and external exposed surfaces , foundation concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregates including necessary earthwork , returning filling , removal including demolition the existing valv pit complete all as specified and shown on drawings. Note : Applicable drawing for valve pit is Drawing No. BTD-811 sheet 1/2 to 2/2

M/s Kataria Construction Company