PROVN OF 01 X GUARD ROOM WITH TOILET AND WATER FACILITIES INCL ELECTRIC CONNECTION FOR 04 MEN BETWEEN POST NO 08 AND 09 FOOT PATH WITH INTER LOCKING TILES DRAIN AT CERTAIN LOCATIONS AND CONSTR OF SEWAGE LINES BETWEEN JCO MESS 7 B COY AND SPL REPAIR O

Amount

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Excavation over areas not exceeding 1.50 m deep and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M & L for providing reinforced cement concrete 1:2:4 (M20) Nominal Mix using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete

M & L for providing reinforced cement concrete 1:2:4 (M20) Nominal Mix using 20 mm graded stone aggregate as in columns, pillars, piers, posps and struts complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under r

M & L for providing reinforced cement concrete 1:2:4 (M20) Nominal Mix using 20 mm graded stone aggregate as in Chajjas and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete 1:2:4 (M20) Nominal Mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed.(Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete 1:2:4 (M20) Design Mix using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m sapn and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges in rough finished flat surface of concrete complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of

M & L for bitumen blown any grade in Damp Proof Course (DPC) applied hot bitumen two coats, to concrete surfaces at the rate of 1.5 Kg per sqm each coat including Polythene film, black, 50 microncomplete all as specified and directed.

M & L for providing pre-cast cement concrete in door or window cills, lintel, bressumers, bed plates, apex stone, pintle blocks, bonders (For stone masonry) and similar items with plain faces including chamfers, weathering, throating etc. in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:6 complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and fair complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for broken stone or boulder hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Supply and fix for powder coated aluminium sliding windows two track with two sliding shutters with extrusions aluminium of following sections including jointing cleats, glazing clips, rubbr packaging, snap beading and other necessary builders hardware as required complete all as specified and directed. (A) FRAME:- (i) Top and side member for two track frame of size 61.85 mm x 31.75 mm x 1.5 mm (weight 0.784 kg/ mtr), Model No. 20829 of Jindal or equivalent as specified in PS. (ii) Bottom rail of frame for sliding of size 61.85 mm x 31.75 mm x 1.5 mm (weight 0.909 kg/ mtr), Model No. 20830 of Jindal or equivalent as specified in PS. (B) SHUTTER:- (i) Top and bottom rail of sliding shutter of size 40 mm x 18 mm x 1.5 mm (weight 0.547 Kg/ mtr), Model No. 20736 of Jindal or equivalent as specified in PS. (ii) Side of sliding shutter with handle and self locking arrangement, section of size 40 mm x 18 mm x 1.5 mm (weight 0.547kg/ mtr), Model No. 20738 of Jindal or equivalent as specified in PS. (C) Sliding shutter to be provided with 5.5 mm thick sheet glass complete all as specified and directed. (D) Supply & Fix for 6.5 mm thick powder coated aluminium diamond grill with mill finished fixing on wall/wooden chowkhat/ aluminium frame with suitable size of aluminium 'U' channel and steel chromium plated, screw with rawel plug complete all as specified and directed with following details:- (i) Aperture size of aluminium grill 67 mm x 84 mm. (ii) Cord dimension 7 mm x 5.8 mm. (iii) Plate thickness 2 mm. (E) Supply & Fix for Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm fixed with galvanised wire staples/ clip/ aluminium flat, complete all as specified and as directed.

M & L for 75 mm thick Plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as sub base/Plinth Protection complete all as specified and directed.

S&F Structural Steel Work in Roof Trusses (Framed), Trussed, Purlins including Fastenings, Heavy Bracket Framing (Beam, Tee, Angle, Channel or Flat Sections), Distance Pieces & Cleats Confirming to Fe-410-W(Grade E-250 quality- A) complete all as specified and directed.

S&F 0.50mm thick Pre-Painted Galvatume Aluminium Zinc Coating GI based Corrugated steel sheet of any colour having tensile strength of 550 MPA as in Roof covering / Cladding to walls fixed with self tapping screws complete all as manufacturers instruction and complete all as specified and directed.

S & F for power coated GI snap grid system of size 605 X 605 mm for ceiling fixed to walls with rawl plugs and screws and hang to roof members with 2 mm dia GI wire comprising of the following sections complete all as specified and directed. (i) Maint Tee 28mm X 24mmX0.3mm thick (ii) Cross Tee 28mm X 24mmX0.3mm thick (iii) Wall angle 28mm X 24mmX0.3mm thick

S & F 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

S & F for Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with MS tube, suppling & fixing in opening complete all as specification and drawing.

S & F Factory Made Solid PVC Moulded Door Shutter with Wood free EPS , 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

M&L second class HW for plain solid, straight chowkets and frames wrought framed rebeted on the solid, rounded, chemfered put together with pinned, at joints complete all as specified and directed.

M & L second class hardwood in 30 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial faceveneers supplied and fitted to chowkats complete all as specified and directed.

S & F Butt hinges of size 100mm, extruded alu minium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-alloy and fixed complete all as specified and directed.

S & F 200mm Aluminium anodised, barrel tower bolts of ex truded section and fixed complete all as specified and directed.

S & F 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

M & L preparation of newly plastered surfaces of wall and applying three coats of white washing over a coat of chalk whiting complete all as specified and directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M & L for Preparation of new steel Surfaces of any description, over 10cm in width or girth,of any description and applying two coats of synthentic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for Preparation of new wooden Surfaces of any description, over 10cm in width or girth,of any description and applying two coats of synthentic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.

M & L for Glazed ceramic white tiles of size 350 mm X 250 mm X 7 mm thick or 450mm X 350mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M & L for cement concrete 1:3:6 Type C-2 Nominal Mix, using 40 mm graded stone aggregate as in bed to drain pipes of 150 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M & L for PVC (SWR) pipes 150 mm single socket, in any length with rubber ring joints, laid in trenchs or in floor complete all as specified and directed.

M & L for plain cement concrete 1:2:4 Type B-1 Nominal Mix (using 20 mm graded stone aggregate), as in lintels upto 1.5 m clear span, cills, steps,seismic and other similar bands, plinth course, string courses, lacinng courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M & L for providing pre-cast cement concrete landing, cover slabs (for man holes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:4 complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F of 125 / 110 mm size PVC (SWR) gully trap, setting and jointing with solvent cement complete all as specified and directed.

S & F of 75 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed.

S&F 110mm dia PVC (SWR) Bend of any radius with access door complete all as specified and directed.

S & F Brass chromium plated Tubular towel rail, 20mm dia,D-Type, 60cm long between flange complete all as specified and directed.

S & F of 15 mm bore stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F 600 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S & F of 32 mm size (Dia of discharge pipe) waste coupling of PTMT half or full threaded (minimum weight 45 gram) complete all as specified and directed.

S & F of 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

Fixed Stop valve (or sluice valve) covers, cast iron, including bedding in cement mortar 1:3 complete all as specified and directed.

S & F of 15 mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 15 mm bore galvanised steel water tubing medium grade with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S & F 20mm dia medium grade GI tubing with all fitting and fixed to wall, ceilling or laid in floor etc complete all as specified and directed.

S & F PVC valveless, syphone action type flushing cistern, low level,white with inlet ball valve float and handle 10 ltrs capacity incl brackets in repairs complete all as specified and directed.

S & F 500 litres Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including ball brass valves, high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S & F for Wash Hand basins, Vitreous China, white, flat back, size 550x440mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.

Septic tank for 10 users on site LLDPE septic tank designed with upflow filter including media to carry sewage and sullage water,excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc complete all as specified and directed.

Surface excavation not exc 30cm deep & avg 25 CM deep getting out in Soft/loose soil complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in flooring complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade as in floor over and including 40mm thick sand cushioning complete all as specified and directed. (Note : Sand cushioning shall be measured and paid separately).

M & L for Providing, Type B1 1:2:4 (using20 mm graded stone aggregates) cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M & L for cement concrete1:3:6 Type C2 Nominal Mix, using 40 mm graded stone aggregate as in bed to drain pipes of 200 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M & L for 200 mm internal dia RCC NP2 class pipe laid in trenches jointed complete with collar in cement mortar 1:1 and tested complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 using 20mm graded stone aggregate in forming channel, benching inside manholes (1/2 or 3/4 section) in manholes and as in coping including necessary form work complete all as specified and directed.

Material and labour for rendering 10mm thick in cement mortar 1:4 on internal fair faces of brick work or concrete surface finished even and smooth without using extra cement and mixing of WPC as per manufacturer instruction complete all as specified and directed. Note:Water proofing compound shall be measured and paid seperately.

Material and labour for extra for forming fair finished channel or drain of 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred stopped ends etc complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:6 on external fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L for cutting into existing manholes for connecting new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

M & L for Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed.

Dismalting AC/GI/PPGI corrugated or semi corrugated in wall cladding or roof coverings and hanger doors including ridges and make for good aluminium earthing strips after fixing of sheets complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling unframed work timber scantling 40 sq cm & over in section, in any position includding removing of unserviceable material from work site complete all as specified and directed.

Dismantling unframed work in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section, in any position includding removing of unserviceable material from work site complete all as specified and directed.

M & L for Preparation of new steel surfaces of any description, over 10cm in width or girth, and applying two coat Black Japan paint over a coat of red oxide primer not otherwise described complete all as specified and directed.

Taking down plastering on lathing (other than wire-netting), without removing lathing, in lime mortar (one side only measured in cases where both sides are plastered) complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for plastering 15 mm thick in cement mortar 1:4 in two layers (10+5) mixed with water proofing compound @ 3% weight of cement in top 5 mm thick finishing with fair and even without using extra cement complete all as specified and directed. Note:Water proofing compound shall be measured and paid seperately.

Supply only integral water proofing compound complete all as specified.

M & L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or stone masonry or on one side of lathing surfaces and finishing the surface even and fair complete all as specified and directed.

M & L for rendering 10mm thick in cement mortar 1:6 on the other side of lathing complete all as specified and directed.

S & F in repair for GI wire netting 0.90mm dia and 12mm mesh in patches n exc 5 sqm each lathing to wood or metal studding, joists, etc in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed.

M & L for complete removal of existing treatment of wall surfaces and applying two coats of exterior emulsion weather proof cement based paint over a coat of primer complete all as specified and directed.

M&L for rendering 10mm thick in cement morter 1:6 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coat of distemper oil emulsion over alkali resistance primer complete all as specified and directed.

M & L for old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified and directed.

M & L for Providing, cement concreteType B1 1:2:4 (12.5 mm graded aggregate Cement concrete) , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frame n.exc 1.5 Sqm each removing to or from store complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame exc 1.5 Sqm but n.exc 4 Sqm each removing to or from store complete all as specified and directed.

S & F for Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with MS tube, suppling & fixing in opening complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing abd as directed by Engg-in-charge

S & F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S & F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

S & F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S & F 100mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 125 mm aluminium handles cast type, anodised complete all as specified and directed.

S & F for Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor 150 mm overall length of cover plate complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with Screed bed or bedding layer 15 mm thick for laying floor finishes in cement mortar 1:6 etc complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed.

Taking up or down steel tubing 15 mm and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20 mm and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S & F 15mm dia medium grade GI tubing with all fitting and fixed to wall, ceilling or laid in floor etc complete all as specified and directed.

S & F for Cast iron Nahani trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Fixing only CP soap tray fixed in the wall complete all as specified and directed.

S & F for PVC (SWR) 110mm bore vent cowl complete all as specified and directed.

S&F 110mm dia bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F Vitreous china wash hand basin size 550 x 400 mm (flat back or angle back type ) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted / erecting stand including PVC connection of 450 mm length cutting and pinning in ends making good distrurbed surfaces in cement mortar 1 :3 including taking down unserviceable wash hand basin and connected items of any description complete all as specified and directed.

S & F in repair brass chromium plated shower roses 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S & F in repair Vitreous china wash down water closet pan (Pedestal Pattern ), white including white plastic seat cover with steel CP hinging device,Suitable brass CP wash jet,flush pipe fixed as in complete jointing connecting and making good the distrubed surface complete all as specified and directed.

S & F in repair CP health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed complete all as specified and directed.

S&F in repair 10 Ltrs capacity PVC valveless, syphonic action type, flushing cistern,low level, white, with inlet,ball valve, float and handle including brackets including PTMT PVC connection 600mm long complete all as specified and directed.

M & L for Surface dressing n exc 15 cm deep on soft/loose soil complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size size conforming to IS-15658-2006 of 80mm thickness M-40 Grade with grey cement and pigment over and including 40mm thick sand cushioning complete all as specified and directed.

M & L for Providing, cement concrete 1:3:6 type C1 in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M & L for point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor ( FRLS ) 1100 Volts grade cable ( red colour cable to be used for Phase connection and black colour cable to be used for neutral connection ) including PVC conduit with all accessories including 1.5 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch , socket and fan regulator with 3 mm thick hylum laminated sheet cover complete Make: havells/finolex or equivalent complete all as specified and directed.

Light/Fan/Exhaust fan/Bell point

5 amp socket on same boared

S&F of switch piano flush type 5/6 amps, 230 volt single pole one way complete all as specified and directed.

S&F of socket only 5 pin, multipurpose type 5 Amps flush type 230/240 V complete all as specified and as directed .(For same Board only)

S&F of ceiling rose 3 phase/PVC/polycarbonate,isolated body,surface type with ISI marked complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed

S&F bulk head luminaire environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs 10 Watt, 230 Volts, 50 Hz including lamp, connection wire complete all as specified and directed.

S&F wall decorative ultra slim LED 18/20 Watt, 230 volts, 50 Hz, 4 feet, lighting fixture with extruded polycarbonate lighting fixture, environmental friendly, energy efficient ready to use pack including lamp complete all as specified and directed.

Supply and fixing of 230V, 10KA 'C' curve miniature circuit breaker (MCB) SP 10 to 32 Amp current carrying capacity complete with connection testing complete all as specified and directed.

Supply and fixing of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 16 to 32 Amp current carrying capacity complete with connection testing complete all as specified and directed.

Supply and fixing of factory made sheet metal enclosure for DBs double door, SPN, 240 volt, 8 Way, IP-42 protection with bus bar, neutral link, earth link complete all as specified and directed.

Taking down carefully aluminum/ copper point wiring (light, fan, socket, power point) including batten, conduit, casing caping and fitting such as switches ceiling rose, socket, bell, regulator, switch board complete removing from site making good disturbed surface of wall floor, ceiling complete all as specified and directed.

Hanging only ceiling fan (MD, Supply) and connecting up including provision of cable and hanging rod as required length from ceiling rose or connector to fan including taking down existing and deposit to MES store yard complete all as specified and directed.

Fixing only exhaust fan (MD, supply) and connecting up including provision of cable or connector to fan including taking down existing and deposit to MES store yard complete all as specified and directed.

Supply and laying coarse dry sand as in cushioning of underground electric cable in trenches laid in uniform thickness of 23cm (15cm under the cable and 8 cm over the cable) and gently punned down 18 cm complete all as specified and directed. Note: Punned thickness shall be measured and paid.

Material and labour for laying Sub class B brick locally available of size 230mmx115mmx75mm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed.

Supply and laying pipes galvanized iron light grade with all fittings for cable protection of size 40mm bore complete all as specified and directed.

Supply and lay cable XLPE insulated XLPE screened PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 2 core 10 sqmm complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600mmx600mmx6mm thick buried directely in ground (earth pit not less than 2025 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level,connected to galvanised earth lead wire 4.0 mm dia by means of bolts,nuts,check nuts and washers of galvanised iron or steel including necessary earth work in any type of soil,returning filling in and removal of surplus soil concrete pit in PCC(1:3:6) type C1 pre cast RCC 1:2:4 type B1 cover slab 54cmx54cmx5cm reinforee with 8 mm dia bar TMT @ 150mm center to center both ways with one handle for lifting made out 8 mm dia MS bar with wire mesh funnel,20mm GI tubing medium grade for watering and 40mm GI tubing light grade for protection all as shown in electrical plate No 3 connected to earthing test point all as specified and directed including testing on completion complete all as specified and directed.

M&L for boring/ drilling (horizontally) hole manually under existing road, pavement, hard standing (maximum 10mtr in width) suitable for passing water pipe line upto 25mm complete all as specified and directed.

Supply and laying 3 layer PP-R polypropylene random copolymer concealed pipes 25 mm outer dia SDR 7.4 (PN 16),UN stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain and brass threaded polypropylene random fitting laid in trenches/wall including all fittings complete all as specified and directed.

Cutting of existing GI pipe 50 mm in position for insertion and including of new tee of size 50x50x25 mm complete all as specified and directed.

Supply & fixing PPR Gate Valves (Brass insert) of 25 mm outer dia complete all as specified and directed.

Material and labour for construction of valve pit chamber of internal dimension 40 x 40 x 40 cm with sub class 'B' bricks in CM (1:4) and 10 mm thick plastering in cement mortar (1:4), PCC (1:4:8), type D2 (using 40 mm graded broken stone aggregate) as in foundation lean concrete, PCC (1:3:6), type CI (using 20 mm graded broken stone aggregate) as in bedding and copping MS frame with 40 x 40 x 5 mm angle iron and 3 mm thick MS sheet cover plate with locking arrangements, hinges and two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface, two coats of white wash on plastered surface (exposed to view) including necessary excavation in soft/ loose soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m complete all as specified and directed.

KP GHOSH AND CO (BID ID -3101321)

M/S RK Trading (BID ID -3100151)

M/S P R SINGH AND SONS (BID ID -3100135)

S K ENTERPRISE (BID ID -3101102)

M/s Sashi Enterprise (BID ID -3100289)

M/S SINGH TRADERS (BID ID -3102078)

M/s Pramillabh Construction (BID ID -3100357)