GE (N) P/TOKEN- 68 OF 2025-2026 REP TO FLOORING,PLUMBING,JOINERY, PLASTERING, SANITERY FITTINGS AND MISC REP AT VICTORIA ROAD, VISWAMITRA MARG SCSR, NEHRU MARG AND OTHER NEAR BY UNITS (MD/OTM ACCN) IN THE AREA OF AGE B/R (EAST) UNDER GE (N) PUNE

S&F Factory made 100 % solid wood plastic composite (WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum, all as specified and directed. NOTE: During fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F 250mm long anodised aluminum sliding door bolts with hasp and staple(bolt type) and fixing clip sheet cast or extruded sections and fixing bolts and sliding bolts complete complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc upto 12.0m height of Bldg complete all as directed.

S&F in repair drapery curtain rod of stainless steel 20mm/25mm dia complete with stainless steel bracket and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete complete all as specified and directed

S&F in repair bracket for curtain rod of stainless steel 20mm dia fixed with rawl plug and steel screw compete complete all as specified and directed

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed. NOTE: During Fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

M&L for rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in CM 1:6 finished even and fair without using extra cement upto 12.0mtr height of bldg complete complete all as specified and directed

M&L for preparation of new wood or wood based surface and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over a coat of primer on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for preparation of old wall surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to including complete removal of existing treatment complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for applying two coats of Oil bound distemper over a coat of alkali resistance primer over a layer of wall care putty (1 to 1.5 mm thick) on wall surfaces including complete removal of existing treatment all as specified and directed.

M&L for applying two coats of Oil bound distemper over a coat of alkali resistance primer over a layer of wall care putty (1 to 1.5 mm thick) on ceiling surfaces including complete removal of existing treatment all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of wall including cornices, plaster by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying one coat of Oil bound distemper on old surfaces of walls all as specified and directed.

M&L for preparation of old surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to mangalore tiles, roof, parapet, wall ,floor etc, on heritage buildings including complete removal of existing treatment complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for preparation of old plastered or unplastered ceiling surfaces including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying one coat of Oil bound distemper all as specified and directed.

M&L for preparation of old decorated surfaces and applying one coat of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

-Ditto- all as per item srl No 55 above but applying two coats.

M&L for preparation of old steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old wood or wood based surface and applying one coat of synthetic enamel paint all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), removing serviceable tiles to store and rubbish off the premises complete all as directed

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm aggregate) Cement concrete as in sub base including demolition of damaged PCC sub base complete all as specified and as directed

M&L for machine pressed precast cement concrete coloured interlocking paver blocks, glossy rubber moulded, of triangular / Zigzag / Haxagone/any shape/design and size as approved, 60mm thick, confoRMing to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ paths/ pavement laid over sand cushioning laid dry to the profile including filling the joints with sand including dismantling of existing tiles of any description complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample. (ii) Sand cushionig measured and paid sepratly.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern) EWC white, includinguding trap, connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete complete all as specified and directed

S&F in repair 40mm dia PVC waste pipe for kitchen sink upto1.0m including coupling including fixing the same complete all as specified and directed Make:Prayag or ISI marked

S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm including CP brass waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and including M S brackets complete complete all as specified and directed

S&F in repair for gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 20mm bore, ISI marked complete all as specified and as directed.

S&F in repair hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and directed by Engr-in-charge. Make : Prayag Cat Pt No GBEA-907 or equivalent

S & F in repair brass chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. Make: Prayag Cat Pt No GBA-135 or equivalent

S & F in repair Brass Chromium plated towel rail 600mm long fixed with brass/stainless screws complete all as specified and directed. Make: Prayag Cat Pt No GBA-131 or equivalent

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including waste coupling waste coupling of CP brass of suitable size, 32mm dia PVC waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm, bowl size 405mm x 330mm x 160mm complete all as specified and directed

S&F in repair glass shelf of size 500x125mm(drop) with chomium plated railing fixed with and including chromium plated bracket complete complete all as specified and directedMake:Prayag Cat Pt No BEA-45G or equivalent

S&F in repair corner glass shelf of size 300mm dia and 8mm thick with chomium plated railing fixed with and including chromium plated bracket complete complete all as specified and directedMake:Prayag Cat Pt No BEA-44G or equivalent

S&F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete complete all as specified and directed Make: Prayag Cat Pt No 9306N or equivalent

S & F in repair Brass Chromium plated towel rack fixed with brass/stainless screws complete all as specified and directed. Make: Prayag Cat Pt No GBA-133 or equivalent

S&F in repairs washing machine cock quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete complete all as specified and directed Make:Prayag/Jaquar or equivalent

S&F in repairs pillar taps swan neck suitable for 15mm bore pipe long body fancy type brass CP with capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete complete all as specified and directed Make : Prayag Cat Pt No 6514 or equivalent

S&F in repairs pillar taps suitable for 15mm bore pipe long body fancy type brass CP with screwed down screwed for iron pipe or brass ferrule quarter turn complete complete all as specified and directed Make:Prayag Cat Pt No 6802 or equivalent

S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make :Prayag Cat Pt No 7875-N or equivalent

S&F in repair 125 mm round shower rose with 225 mm long SS arm with flange complete all as specified and directed. Make :Prayag Cat Pt No GBOS-606 or equivalent

S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Prayag Cat Pt No GBA-118S or equivalent

S&F in repairs bip taps standard of PTMT any colour 15mm bore min wt 90 gms Make:Prayag Cat Pt No 124HW or equivalent

S&F in repair 15 mm bore angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete complete all as specified and directed Make:Prayag Cat Pt No P6810 or equivalent

S&F in repair 15 mm bore stop cock (concealed type) with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete complete all as specified and directedMake: Prayag Cat Pt No 6514 or equivalent

S&F in repairs two way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete complete all as specified and directed Prayag Cat Pt No P6812 or equivalent

S&F in repair 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1,1:2:4 using 20mm graded stone aggregate complete complete all as specified and directed

S&F in repair grating round 75 mm size of steel CP with/without hole complete all as specified and directed

S&F in repair grating round 100 mm size of steel CP with/without hole complete all as specified and directed

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete complete all as specified and directed.

S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete complete all as specified and directed.

S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete complete all as specified and directed.

S&F in repairs PVC (SWR) branch piece single (single ‘Y’) equal or unequal for 110mm bore PVC pipe complete complete all as specified and directed.

S&F in repairs Pillar taps standard of PTMT any colour 15mm bore min wt 125 gms Make:Prayag Cat Pt No 130-Q or equivalent

S&F for 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing complete all as specified and directed

S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia of bore complete all as directed

M&L for welding in repairs exc 2.5cm but n.exc 5.0cm in length and thickness of metal to be welded n.exc 6mm complete all as specified and directed.

Dismantling of structural steel work of any description including doors, gates, framed trusses etc. complete all as specified and as directed.

Supply and fix mild steel work in tubular trusses, beams, rafters, purlins, main columns, posts etc., for structural work includinguding special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes confoRMing to IS: 4923-1997 grade St.-240 fixed with angle cleats or other connecting plates complete all as specified and as directed.

M&L for mild steel framed work such as grill, grating etc. with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work confoRMing to Fe 290 Gde-E-165 complete all as specified & as directed.

M&L for cement concrete 1:3:6 type C-

2 (using 40mm graded stone aggregate) 75 mm thick in plinth protection, laid in alternate bays not exc. 3.0m in length, finished surfaces even and smooth without using extra cement including demolition existing concrete and rubbish off the premises complete all as specified and directed

Supply and fix rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,confoRMing to Fe-290 Grade-E-165 complete all as specified and as directed.

M&L for repair to Aluminium door/windows of any description area exc 1 Sqm but not exc 2 Sqm each, taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminium snap beading, re-setting floor/ hydraulic spring etc complete all as specified and as directed.

S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

S&F in repair 2 mm thick fibre glass reinforced translucent corrugated or plain sheeting with coach screw and washers in roof or wall etc complete all as specified and directed.

S&F in repair 0.63 mm thick Plain, galvanised steel sheeting, in ridges, hips, valley gutters drip and straight flashings (length and girth as fixed) complete all as directed

Material and labour for roof tiles Mangalore pattern interlocking at side joints, laid dry including dismantling single layer Mangalore pattern or similar tiles in roofing and rubbish off the premises complete all as specified and as directed.

All as per serial item No. 146 here-in-before but except tiles.

-Ditto- all as per item No 133, here in before but on 75mm dia of bore

Material and labour for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:6) etc incl dismantling of tile and rubbish off the premises complete all as specified and as directed.

All as per serial item No. 149 here-in-before but except batten.

S&F in repair cabinet mirror plastic body for toilet of size 350mm x 450mm with 4mm thick looking mirror complete complete all as specified and directed Make : Prayag/Polytuff.

Dismantling wooden scantling of size 40sqcm and over in section and in any position and position

All as per serial item No. 152 here-in-before but except timber.

Material and labour for preparation of battens, any size and spacing and treated all over (measured overall on one side only, spaces not deducted) with two coats of creosote oil complete all as specified and as directed.

M&L PVC Fibre board Eves/Weather Boarding 18 to 20mm thick and fixed, complete approved arch pattern any size and shape including taking down of existing board all as specified and as directed.Make: Shera wall/Everest/ V board etc

Dismantling plain or corrugated steel sheeting, any gauge, thickness,including nainital or similar pattern roof coverings complete all as specified and directed

Dismantling of asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and directed

Supply and fix for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

M&L for semi perforated 12 mm thick micro tegular edged or 10 mm squar edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRCO.50 to 0.75 as per IS-8225; 1987, Noncombustible as per BS-476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal. T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per Sqm incl both sides) comprising of main-T runners of size 15 x 32 mm of length 3000 mm, cross-T of size 15 x 32 mm inteRMediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2mm, galvanised iron perimeter wall angle of size 24 x 24x o.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out upto 12 Mtr height as per specifications, drawing and as directions of the Engr-in-Charge.

Material and labour for second class hard wood, clean sawn, in scantling timber framed work complete all as specified and as directed.

Supply and fix for second class hardwood clean sawn tile battens, cross sectional area exc 5 and n.exc 15 Sqcm spaced at 30 cm centres to centres fixed with nails complete including dismantling of scantling and rubbish off the premises all as specified and as directed. (NOTE:Measurements shall be taken overall including both battens and spaces. Deductions shall be made only for openings exceeding 0.40sqm each).

M&L for preparation of old surfaces of wood and applying one coat of synthetic enamel paint on ceiling surface complete all as specified and as directed.

Removing of vegetation / plantation on the wall/ roof/ any position of up to fourth storey building including necessary scaffolding and roots, girth n. exc. 10cm each and applying chemical treatment with GLYPHOSATE 41% and making good surface including removing /refixing of CI/GI pipe lines (area n exc 0.5 sqm) complete all as specified and as directed. (Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)