Design, manufacturing, supply, installation, testing, commissioning of Electronic Private Automatic Branch Exchange (EPABX) and Annual Maintenance Contract (AMC) at Anushakti Bhavan, Colaba, Mumbai

Amount

PART A:

PART B:

Description of Work / Item(s)

Amount

Supply, Installation, testing and commissioning of Digital Switching System (PBX) having expandable capacity of 1500 ports with Platform for mounting of PBX System, with fully duplicated common control, including shelf controllers and Power supply Units, with following configurations: a) No. of Analogue Extensions to work up to a distance of 2 km. on 0.5 mm dia telephone cable. (Equipped Capacity=300 & Wired Capacity = 350 ) b) No. of digital Extension to work up to a distance of 800 M on 0.5 mm dia. telephone cable. (Equipped Capacity=150 & Wired Capacity = 250) c) ISDN PRA PSTN Interfaces on E1 links (with Level DID facility) (Equipped Capacity= 4 & Wired Capacity = 6) d) ISDN PRA Interfaces on E1 links for inter PBX connectivity with QSIG (Equipped Capacity= 2 & Wired Capacity = 3) e) Analogue Trunk Lines (Equipped Capacity= 8 & Wired Capacity = 16) f) Integrated auto attendant (6 calls simultaneously) (Equipped Capacity= 1 & Wired Capacity = 1) g) Operator Consoles Interfaces (Equipped Capacity=2 & Wired Capacity = 3) h) Music source Interface (Equipped Capacity= 1 & Wired Capacity = 1) i) Interfaces for public Address System (Equipped Capacity=1 & Wired Capacity = 1) j) No. of VoIP Devices (Equipped Capacity= 10 & Wired Capacity = 50) k) No. of Mobile extensions (Equipped Capacity= 50 & Wired Capacity = 50) l)Supply, Installation, testing and commissioning of Integrated (in skin) Voice Mail System, 8 simultaneous internal access ports, 1000 mail boxes, 200 hrs voice recording.

NMS with full GUI management software with Configuration management, Facility for customer data back up on NMS, and Fault management. (Necessary Hardware with required Operating system including a PC as specified should be supplied without any extra cost.)

Centralized call accounting system with full accounting software for external and Internal call logging. (Necessary Hardware with required Operating system including a PC and printer as specified should be supplied without any extra cost.)

Supply, Installation, testing and commissioning of Operator consoles with roset boxes

Supply, Installation, testing and commissioning of Pulse / tone Phones with CLI and roset boxes

Supply, Installation, testing and commissioning of Digital Phones with roset boxes and one additional original coil cord by OEM of the instrument.

Supply, Installation, testing and commissioning of IP Phones with one additional original coil cord by OEM of the instrument.

Supply, Installation, testing and commissioning of N+2 Redundant Modular Float Cum Boost Charger (FCBC), maintenance free Lead-Acid Batteries (VRLA) for PBX wired capacity load and 8 hrs battery backup load, with platforms for mounting of FCBC cabinets & batteries and 1 no. spare power supply module of FCBC. Scope includes power wiring from the existing Electrical distribution systems to FCBC, Batteries, Earth systems etc. with suitable electrical wires and accessories, removal and shifting of existing FCBC, batteries, cables/ wires and accessories etc. to designated place in the premises.

Supply, Installation, testing and commissioning of following Main Distribution Frame (MDF) or MDF with top and bottom cable entry, accessories including GI cable tray with ceiling/ floor support and PVC trunking of appropriate size for cable routing between PBX and System MDF, field MDF/TTB and system MDF etc a;ll as per specifications, site conditions and instructions of Engineer in charge:

MDF mounting frame box made out of 18 SWG MS CRCA sheet duly power coated with front hinged door (s), gasket, CAM lock with master key and jumper rings/cable managers, gland plates on top and bottom, chart holder/pocket to be provided as directed, with a capacity of mounting 1200 pair Krone Module (600+600 with LSA-PLUS type connector modules, silver-plated contacts), 2/10, 11 way SS back mount frame CT Block, dust cover, label holder, mounting accessories etc. complete as per site conditions and instructions of buyer (scope includes documentation of existing cables pairs and cable glanding, re-termination of cables from the system MDF side, existing field side cables and jumper wires, removal and shifting of existing MDF and accessories to designated place in the premises).

System MDF mounting frame box made out of 14 SWG/2mm MS CRCA sheet duly power coated with front hinged door (s), gasket, CAM lock with master key and jumper rings/cable managers, gland plates on top and bottom, chart holder/pocket to be provided as directed, with a capacity of mounting 2000 pair Krone Module (equipped with LSA-PLUS type connector modules, silver-plated contacts), 2/10, 11 way SS back mount frame CT Block, dust cover, label holder, floor/wall mounted with plateform/required mounting accessories etc. complete as per site conditions and instructions of Engineer in charger. (scope includes cable glanding, documentation of existing cables pairs and re-punching of cables from the system side and field side, removal and shifting of existing MDF and accessories to designated place in the premises).

2/10, 11 way SS back mount frame CT Block loaded with 10 nos. of Krone Modules-LSA-PLUS type connector modules (10x10=100 pairs), silver-plated contacts , dust covers 3 nos. with each set, label holders 3 nos with each set, mounting accessories etc. complete as per site conditions and instructions of buyer. (scope includes removal of existing CT BOX and Krone modules in existing MDF/TTB box, documentation of existing cables pairs and re-punching of cables from both sides, cable dressing in MDF, providing cable dressing accessories as required, shifting of existing MDF/TTB accessories to designated place in the premises. Few of removed CT bosex to be installed in existing TTBs with cable termination at new place).

Replacement of existing Krone Modules-LSA-PLUS type connector modules of 10 pairs each on existing SS CT boxes, silver-plated contacts complete as per site conditions and instructions of buyer. (scope includes removal of existing Krone modules in existing MDF/TTB box, documentation of existing cables pairs, cable dressing and re-punching of cables from both sides, cable dressing in MDF/TTB, providing cable dressing accessories as required, shifting of existing MDF/TTB accessories to designated place in the premises).

Supply and replacement of following Distribution/Telephone Tag Blocks (TTB) mounting frame box made out of 18 SWG MS CRCA sheet duly power coated with front hinged door (s), gasket, CAM lock with master key and jumper rings/cable managers, gland plates on top and bottom to be provided as directed with Krone Module (equipped with LSA-PLUS type connector modules, silver-plated contacts), 2/10, 11 way SS back mount frame CT Block, dust cover, label holder, mounting accessories etc. complete as per site conditions and instructions of buyer (scope includes documentatiB17:B19on of existing cables pairs, glanding and re-punching of cables, cable dressing removal and shifting of existing TTBs, wires and accessories to designated place in the premises).

50 pairs

200 pairs

400 pairs

Tools & Accessories

Punching/insertion tools (Krone)

Pegs (Krone)

Connection Cord 2/2 2 pole with Plugs

Disconnection Plug 10 pair

Test Cord 2/2, 2 pole with 2 banana Plugs

Protection plug set of 10 with Earth bar

Jumper cable 0.5 mm, 1 pair, different colors (cat 5/cat5e/cat6 cables may also be used by removing sheath)

Supply and installation of CAT 6 cable for interconnection between System MDF and field MDF etc. of reputed make as approved by buyer.(Quantity indicated is tentative and will be supplied after actual measurement as per site conditions)

Digital Temperature & humidity indicator

Digital Multimeter (Fluke Make, model 15B+/17B+/18B+ Or superior)

Multipurpose tools kit including tools like cutter, nose pliers, wire stripper, allen keys (hex) set, screw driver set (various sizes and types), D-spanner set, box spanner set with rachet handle, slide wrench set, filing tool, cleaning liquid, brushes etc.

Set of emergency spares

Offered type Analog Extension card

Offered type Digital Extension card

Offered type Analog trunk card

ISDN PRA Interfaces card

Description of Work / Item(s)

Amount

Comprehensive AMC: Annual comprehensive maintenance and servicing of above EPABX including MDF after expiry of one year defect liability period reckoned from the date of satisfactory completion of entire work mentioned above including attending to break down if any, all as per manufacturers guidelines and relevant standards and as required. Frequency of preventiuve maintenance and servicing shall be twice in a year.

Comprehensive AMC cost for 1st year (After defect liability period of one year from the date of successful commissioning)

Comprehensive AMC cost for 2nd year

Comprehensive AMC cost for 3rd year

Comprehensive AMC cost for 4th year

Comprehensive AMC cost for 5th year

RAJCOMM Communication Systems Pvt. Ltd..

PROGILITY TECHNOLOGIES PVT LTD

RAJCOMM Communication Systems Pvt. Ltd..

PROGILITY TECHNOLOGIES PVT LTD

RAJCOMM Communication Systems Pvt. Ltd..

PROGILITY TECHNOLOGIES PVT LTD