Construction/ Installation of Porta Cabin for court complex Chadoora.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular ections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns)

Providing and fixing of aluminium composite panels (ACP sheets) of 3mm thick multicolored in partitions, ceilings, shutters frames etc including neoprene gasket taping waterproof silocone sealant as required at site including all fittings complete as directed by EIC.

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item. With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and fixing of 12mm thick ply for ceiling, soffit, eaves suported with 2"x2" joists framework of 4x4 size including cornice with primer and paint all complete as directed by EIC.

Carriage of materials from source to site of work including loading unloading complete.

stone Agg. For an avg. lead of 20 Km

sand for an avg. lead of 25 Km

Bricks for an Avg. lead of 10 km .