REPAIRS TO SUNKUN SLAB TOILETS SANITARY FITTINGS PLUMBING LINES RCC CHAJJA AND FACIA RAIN WATER PIPE ETC UNDER AGR BR II FOR CABS CEMILAC STIR AT BANGALORE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cum per sqm

Taking down plastering on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.

M&L rendering 15 mm thick stone masonry wall surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed

M&L rendering 10 mm thick cement mortar 1:4 on fair faces of brick masonry or concrete surface wall even and smooth without using extra cement complete all as specified and as directed.(New brick work)

Demolition of cement concrete (unreinforced) of of any descriptions, in Ground floors (Floor Topping, Sunken floor etc) above or below ground level

M&L for PCC 1:5:10, type E2 (using 40 mm graded stone aggregate) cement concrete as in mass concrete complete all as specified and as directed

Supply only Integral waterproofing compound

M&L non-skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. (MAKE:HR JOHNSON/KAJARIYA/SOMANY)

Material and labour for glazed coloured ceramic tiles in vertical surfaces for wall tiles of size 450 x 300 x 7 mm thick as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles with joint free including 10mm thick screed bed in cm 1:4 complete all as specified and as directed.(MAKE:HR JOHNSON/KAJARIYA/SOMANY)

Taking down chowkats or frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each .

Taking down chowkats or frame (without taking off shutter from the frame) n exc. 1.50 Sqm Each

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS square tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip 20 mm wide stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail, bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the styles and rails with suitable sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification drawing

Supply and fix 100 mm size butt hinges, medium weight cold rolled mild steel as in repairs all as specified and as directed.

S & F 100 mm long aluminium anodised barrel tower bolt of extruded section .

S & F 100 mm long aluminium alloy handle febricated of extruded section .

Taking down UPVC (SWR) pipes any dia.

Supply and fix 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

Supply and fix 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

Supply and fix PVC (SWR) bends any radius 75 mm dia of bore.

Supply and fix PVC (SWR) bends any radius 110 mm dia of bore.

Supply and fix PVC (SWR) gully trap 125/110mm, setting and jointing with solvant cement.

Supply and fix PVC (SWR) floor trap 75 mm dia out let with grating plain including jointing with solvant cement complete all as specified and as directed

Supply and fix UPVC (SCH40) pipes single socketed 150 mm bore laid in floor trenches/wall complete all as specified and as directed (ht Upto 20 Mtr including all fittings like bends shoe & necessary scaffolding)

Taking down steel tubing and connections 20 mm dia

Taking down steel tubing and connections 25 mm dia

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

S&F CPVC 25mm outer dia gate valve complete all as specified.

S & F 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)

S & F 25 mm gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and as directed

S & F fancy type 15 mm bib taps, cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed

S & F for vitreous china semi pedestal pattern (Anglo -Inidan Type) white or colour (excluding fixing bolts, flushing cistern and flush pipe including connection to trap and to flushing pipe anti syphonage pipe etc including making good to floor complete all as specified and as directed

Supply only plastic water closet seat ,white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised highing device complete all as specified and as directed

Supply and fixing vitreous china squatting pan 'Orissa' pattern size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush etc) complete all as specified and as directed

S & F for Vitreous china wash basin angle back (Oval type) size 600 x 480 mm white excluding taps waste chain and plug and porcelain stopper including cutting for and pinning in ends of brakets or erecting stand , waste pipe complete all as specified and as directed

S & F in repairs pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed, complete all as specified and as directed

Supply and fix PVC valveless, symphonic action type, flushing cistern low level, white with inlet ball valve float and valve float and handle including brackets 10 ltrs capacity complete all as specified and as directed

Supply and fix in repairs flush pipe of polyethylene of high density of PVC 32 mm for low level cistern, complete all as specified and as directed

Supply and fix vitreous china urinals, size 635 x 395 x 420mm, white, half stall long body type, complete complete all as specified and as directed

S&F Vitreous china urinal partion white 310X700mm complete.

Supply and fix in repairs brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing union cap and fixed 32 mm,complete all as specified and as directed

Supply and fix PVC connection 15 mm size with PTMT nuts of length 600 mm in repair

Supply and fix in repairs push tap any colour high pressure of PTMT screwed for iron pipe and fixed suitable for urinals (Minimum weight 15 mm - 50 gms) 15 mm dia complete all as specified and as directed

Supply and fix in repairs urinal spreader of chromium plated fiting with 15 mm dia pipe complete all as specified and as directed

Supply and fix in repairs stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe, fancy type chromium plated, 15 mm size,complete all as specified and as directed

Supply and fix Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete.

Supply and fixing in position CP recessed type toilet paper roll holder of size 150 x 150mm with necessary CP screws and washers fixed to wall fixed in repair.Make : Jaguar, Cat No. 35701 or equivalent.

Supply and fix soap dispenser chromium plated

Supply and fixed in repairs angle cock, fancy type, chromium plated with long shank and cup 15 mm dia, without flange complete all as specified and as directed

S&F in repairs Bass chromium plated brass tubular towel rail 20mm dia, D type 60cm long between flange complete all as specified and as directed

M&L granite (of any type) work 20 mm thick (table rubbed and polished)in steps, jambs, pillars, windowcills, cooking platforms and like in including cement mortar (1:4) pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and as directed

M&L for PCC 1:2:4 type B0, 25 mm thick (using 12.5 mm graded stone aggregate) as in roof padding finished even and smooth including demolition old concrete complete all as specified and as directed

M&L APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (Weight not less than 150 gms/Sqm) laid on primed surfaces by torch application incl bituminous primer including taking down old APP membrane & bitumen primer confirming to IS-3384 applied @ 0.3 ltr/Sqm and applying aluminium paint @ 100 ml/Sqm complete all as specified and directed. Four course of roof treatment consist of as under :- (a) Applying one coat of bituminous primer conforming to IS 3384 @ 0.3 ltr/Sqm (b) Laying of APP based membrane as specified thickness and weight by torch application. (c) Applying one coat bitumen grade 85/25 @ 1.2 Kg/Sqm. (d) Applying one coat of aluminium paint @ 100ml/Sqm. (MAKE: M/S IWL LTD/M/S STP LTD/M/S TEXSA INDIA LTD)

Dismantling boarding, any description, fixed in any position with screw

Supply and fixing of armstrong ceiling system with fine fissured edge tiles having humidity resistance (RH) of 95%, NRC 0.34 light reflectance approx 84% Thermal conductivity K=0.052 - 0.057. W/mk colour white fire performance of class-I as per BS 476 part 6 & 7 in module size of 600 x 600 x 16 mm thick suitable for green building appliation with recycled content of 38-41% with Armstrong silhouette profile exposed grid system with 15 mm white flanges incorporating 6mm central reveal in white/black colour. Silhoutte, main runners & cross tees to have mitred ends & birdsmouth notches to provide mitred cruciform junctions. The Tee sections have a galvanising of 170 gms per sqm & passed through 500 hrs of salt test. The main runner spaced at 1200 mm c/c should be securely fixe to the structural soffit using Armstrong suspension system at 1200 mm maximum c/c. The first/last Armstron suspension system at the end of each main runner should not be greater than 450 mm from adjacent wall. Cross Tees 1200 mm long should be interlocked between main runners at 600 mm c/c to form 1200 x 600 mm module. 600 x 600 mm module is fortned by fitting 600 mm long flush fitting cross Tees, Perimeter trim consist of Armstron wall angles of size 3000 x 19 x 19 mm secured to walls screws at 450 mm c/c

M&L for PCC 1:2:4 type B1, average thickness 40-70 mm thick using 20 mm graded stone aggregate as in flooring/ paving finished rough to receive cement tiles complete all as specified and as directed

M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed(MAKE:HR JOHNSON/KAJARIYA/SOMANY)

M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed(MAKE:HR JOHNSON/KAJARIYA/SOMANY)

M&L wet shortcrete(gunniting) (M25) mix of cement concrete applied from a nozzle with compressed cleaned air and water added to the nozzle and approved admixture to attain quick setting and high strength including cutting chiseling,making good and panting should be match with existing surface as per directed by Engr-in-Charge.

Demolition of RCC as in Chajja of fourth storey building or height upto and including 15 mtr etc., including cutting old reinforcement to facilitate demolition complete

M&L reinforced cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in chajja of four storey building or height upto and including 15 mtr etc including necessary form work/scaffolding etc complete all as specified and as directed

Mild steel bars 10mm dia and over for fourth storey building height or height upto and including 15 mtr etc., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete complete all as specified and as directed

S&F in repairs providing and fixing factory made uPVC white colour sliding window of area n.ex 2.0 sqm each. Three track made of extruded profiles with wall thickness of 2.3 mm (plus or minus 0.2 mm). Window profile with hollow section with multi chamber, frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm), sliding mesh sash (42 mm x 57 mm), sliding interlock (one vertical length in each shutter) (45.5 mm x 28 mm), Glazing bead (24.5 mm x 16 mm) will be mitred cut and fusion welded at all corners, including railing of holes for fixing of hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 plus or minus 0.2 mm thick galvanized steel frame (30 mm x 18 mm) 2 nos, sliding sash (30 mm x 18 mm), sliding mesh sash (26 mm x 10 mm), profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, Hardware : (touch lock of zink alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and required accessories) Note : the unit rate quoted by contractor excluded cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose)

S&F heat obsorbing glass of 4 mm thick for fixing in uPVC window complete all as specified and as directed.

Hacking out old brocken glass of any thickness size quality or description from wooden frame or stone concrete or brick.

S & F sheet glass 4mm thick for window ordinary quality in exc 0.50 Sqm in each pane with rubber beading as in doors and partition complete all as specified and as directed

M&L Rough cast wire glass, 6.4mm thick and glazing with oil putty in square exc 0.50 but n exc 0.75 Sqm. Note :- The height of the building is Upto 20 m should include scafolding and safety measures

S&F Steel rolling shutters with gear operated type with bevel gear box and crank handle thickness of lath 1.25mm including top cover anchoring rod haps and staple and one shop coat of primer erected in position including taking down old rooling shutter complete.

S & F 12mm thick wave free toughened clear glass with stainless steel spider fitting, fish mouth channel in bottom and top as per requirement with and including provision of all other neccessary fixture and accesaries,complete all as specified and directed.

ARATHEERTHA CONCEPTS

devan enterprises

ABHISHEK CONSTRUCTIONS

M AND V ENTERPRISES

Sreyas Enterprises

TECKXPERT ENTERPRISES

G K CONSTRUCTIONS