MAINT OF ROADS IN ZONE C IN INTERNAL AREA UNDER GE DINJAN

M&L for scarifying or picking gravelled, macadam or bituminous macadam surfaces X in area not exc 400 sqm, exc 50mm and n.exc 100mm deep removing and depositing to low lying area all as specified

Laying and compacting 75mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and cxonsolidating to required gradient and camber complete all as specified and directred

M&L for premix bituminous, macadam with 4% binder (paving bitumen) laid/rolled Cum and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directred

M&L for preparing unsurfaced Wet Mix Macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc all as specified and directed by Engineer-in-Charge

M&L for preparing black top surfaces by brushing with wire brushes for removing X So caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc all as specified and directed by Engineer-in-Charge

M&L for applying evenly a priming/tack coat with bituminous primer using paving XS bitumen at Per 10 Kg/Sqm all as specified and directed by Engineer-in-Charge.

M&L for applying evenly a priming/tack coat with bituminous primer using paving X S bitumen at Per 5 Kg/Sqm all as specified and directed by Engineer-in-Charge.

M&L for Bituminous premix asphaltic semi dense concrete 40 mm consolidated X: thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient using paving bitumen any penetration complete all as specified and directed

Repair to potholes, any depth, not exc. 100 Som each cuding swing free dust and mud, or water, scoring sunken surfaces in roads, paths, els cutting around edges to at least 25 mm in depth, making good by applying tack coat Ki X putting in premised bituminous macadam well rammed and sealed with binder (paving bitumen VG-30) 9.00 Kg per 110 Sqm blinded with 0.09 cum of stone chippings 6.03mm size and again well rammed (including supoty of premixed macadam, binder and chippings), depth of potholes exceeding 30 mm complete al as specified and directed

Supply and foung cat eye solar reflective type of metal body alloy aof size 100mm x 100mm x 20mm with PAMA striplens reflector of model No DA 972.0 fixed with and inol MS stud of suitable size as per manufactures instructions