Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹8.7 L
EMD Value
₹8,687
Closing Date
7 Jun 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aircraft Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED AIRCRAFT DIVISION Vimanapura Post Bangalore - 560 017
CIVIL WORKS PERTAINING TO RENOVATION OF BOILER HOUSE
7475
A/M-PM-C/03A/23-24
Works
Bangalore Complex- Aircraft Divn
₹1,180
₹8,687
7 Jun 2024
14 May 2024
14 May 2024
7 Jun 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Goods and Service Tax ID No.:
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs
I.T Returns for past 03 years
Average annual financial turn over during the last 3 years, ending 31st March 2022 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Related Document to be Uploaded to eProcurement Portal
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
A/M-PM-C/03(A)/23-24
Civil Works Pertaining to Renovation of Boiler House in Aircraft Division, HAL (BC)
29AAACH3641R1Z3
Specification
Demolition of floor concrete of any description and in any position not other wise specifically provided for and depositing where directed by EIC.
Demolition of brick work built in cement mortar, of any description and at any height and depositing as where directed by Engineer-in-charge.
Earthwork excavation over areas for foundation in all soils at required depth as per specified drawing including making necessary arrangements / providing screens for preventing dust falling on sorroundings,bailing out ground water from pits when encountered using pumps,shoring and getting out stacking and getting out depositing, spreading leveling where directed etc., complete
Supplying,mixing and placing cement concrete(1:4:8) with 40mm aggregate for foundation bed concrete, fillingmass concrete including consolidation with required form work etc., all complete as directed by E.I.C.,
Soling (or sub base) 150mm thick layer with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber.
Supplying mixing and placing in position cement concrete (1:2:4) using 20mm graded granite aggregate thickness as ordered including compaction, curing, formwork, etc, complete for lintels upto 1.50mtrs span, all plinth beams, cills and coping bed blocks, all complete as directed by Engineer-in-charge.
Brick work with table moulded bricks in cement mortar (1:6) for superstructure at all levels for 23cms thick walls including raking out joints 10mm deep scaffloding, curing etc. all complete as directed by the Engineer-in-charge. (Brick conforming to IS 1077 : Sub Class 'A' having compressive strength not less than 35kgs/Sq.cms).
Supplying mixing and placing in position cement concrete M25 Grade granite aggregate thickness as ordered including compaction, curing, etc, complete for Raft/Foundation all as directed by Engineer-in-charge (Reinforcement paid seperately)
Cement mortar (1:6) plastering 15mm thick for brick/concrete surfaces, finished smooth with trowel including lime rendering for interior faces of walls and fair finish for exterior surfaces of walls including scaffolding, curing including mixing the cement mortar etc., all complete as directed by the Engineer-in-Charge.
Supplying and fixing ceramic glazed Coloured Tiles (Wall tiles) of approved size, colour and manufacture laid over and with a screed of average thickness 20mm but not less than 15mm in cement mortar cement mortar (1:4) joints set and pointed with coloured cement to match with that of tiles, curing, etc., complete for skirting and dado as directed by Engineer-in-Charge.
Supplying and fixing anti skid (Floor tiles) glazed ceramic coloured tiles of approved manufacture, size and colour conforming to specification and jointed with neat cement slurry and pointed with coloured cement to match with that of tiles over and with a screed of average thickness 20mm but not less than 15mm in cement mortar (1:6) including curing etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing 15mm dia CP tap heavy duty (Approved brand) including fixing to GI pipe cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete as directed by EIC.
Supplyig & fixing fancy type chromium plated angle cock/stop valve 15 mm nominal bore diameter Stop valves, cast copper alloy,screwed down,high pressure,with crutch orbutterfly handle,screwed both ends for iron pipe or for unions and fixed etc complete.
S/F PVC pipes
Supplying and fixing the following P.V.C specials of approved manufacture
Supplying and fixing CPVC pipe water lines including all special fittings as directed by EIC. a) 20mm dia.
Supplying and fixing CPVC valve including fittings as directed by EIC. a) 20mm dia.
Supplyig & fixing fancy type Shower, Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms as per requirement as directed by EIC.
Supplying, fabricating and fixing single skin trapezoidal profiled precoated coloured sheet of approved colour for roofing,cladding, flashing, curves, gutters etc., The sheet shall be of 930-1020mm cover width with 28-32mm crest depth at 186-250mm c/c manufactured out of 0.5mm (TCT) total coated thickness high tensile steel plain sheet with aluminum Zinc alloy coating substrate (as per AS 1397) The profile and length of the sheet shall be to suit with site requirement. The steel base material shall have 550Mpa yield strength made out of cold rolled steel and shall be coated with anti corrosive layer of Zinc aluminum alloy coating,Zinc 43.5% and aluminium 55% with minimum 150 gms/m² mass total on both sides.
Removing of old AC sheets / GI sheets / Galvalume sheet & returning to the stores etc., complete as directed by Engineer-in-charge.
Providing and fixing with 3mm thick APP of approved brand including surface preparation & fixing to the roof with bitmen and one coat of Aluminium Paint etc complete as directed by EIC.
Supplying, fabricating and placing reinforcement steel TMT bars including necessary inding,cranking,hooking at the ends cut to length as per design and drawings including binding with mild steel wire (soft drawn) of 0.9mm dia for rods 10mm and and over etc., complete.
Supplying fabricating and fixing in position MS frame work of approved design and drawing made up of MS Structural elements such as ISA, ISMC, ISNT, MS Flats, rolled hollow section including fixing verticals posts 150mm below floor with necessary pocket holes drilling and making good with cement concrete, painting with 2 coats of Aluminium paint over and with one coat of yellow based zinc chromate primer preparation of surface etc., complete all as per approved design and as directed by the Engineer-in-Charge.
Painting one coat of Enamel paint over Steel surface of approved brand/ manufacturer including surface prepation etc., complete as directed by Engineer-in -charge.
Painting two coats of Plastic Emulsion of approved manufacture and shade to newly plastered interior surface of walls & ceiling as directed conforming to IS 428 applied evenly to give a uniform finish over and with a coat of approved primer including cleaning the dirt and other impurities, scrapping smooth and filling crevices, necessary scaffolding etc., as specified complete at all levels.
Supply and Painting two coats of Apex Ultima of approved manufacture and shade to plastered surface of walls & ceiling as directed conforming to IS 428 applied evenly to give a uniform finish over and with a coat of approved primer including cleaning the dirt and other impurities, scrapping smooth & 2mm thick putty finish, filling crevices, necessary scaffolding etc., as specified complete at all levels.
Water proofing compound
Supplying and fixing 2mm thick translucent fibre glass reinforced polyster corrugated roofing sheets of approved manufacture confirming to IS12866 with one and half corrugation side lap fixed with L hook or J bolts and nuts and washers complying with lead,etc.,all complete as directed by E.I.C.,(Lap will not be considered for payment)
Supplying and fixing 4mm thick plain sheet glass conforming to IS 2835 in panes not exceeding 0.50Smtrs fixed with oil putty in steel frame including punching, drilling for fixing glazing pins/spring clips as directed by the Engineer-in-charge.
Supplying, Fixing, Testing and Commissioning 801mm Roto dia, 610mm neck / throat dia Wind Turbo Roof Ventilator with Bright aluminium Double curved vanes / fins(42 Nos), with stainless steel Top cover, SS Bottom ring, SS shaft cover En 8 hardened shaft, bushes and accessories, mounted on standard base sheet and fixed to galvalume/FRP sheet with necessary fasteners - Nuts & Bolts, Rivets (all built in) etc, complete all as directed by the Engineer-in-Charge.
Supplying and fabricating & fixing 0.63mm thickPlain, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) etc, complete all as directed by the Engineer-in-Charge.
Dismantling the Structural steel work including Doors, gates, shutters, frames ect and handing over to the maintenance Department etc all complete as directed by EIC.
Demolition and breaking up old drain pipes 200 mm dia AC / pvc Down take pipe / and hand over to the maintenance work ect all complete as directed by EIC.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
03ATenderDocument.pdf
TENDER_DOCUMENT • 1.51 MB
TENDERDOC3A.doc
TENDER_DOCUMENT • 0.63 MB
Profile03AUpdate.xlsm
TENDER_DOCUMENT • 0.06 MB
BOQ03AUD.xlsm
TENDER_DOCUMENT • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .