8977/GWL/E8 REPAIR/MAINT OF CERTAIN STEEL FURNITURE ARTICLES AT GE GWALIOR

Amount

TABLE BEDSIDE STEEL : FD/E6/MAP/15(R) : S&F following components of table bed side including dismantling taking out carefully & renewal of old components of table with new components of same pattern or same size complete all as shown on drawing, as specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

S&F new 18 mm thick commercial plywood BWR grade ISI marked duly pasted with 1 mm thick sunmica sheet in colour/shade as approved by GE for top of table bed side of size 450mmx 500mm or size fit on table top placed in position with 4mm thick teak wood half round beading alround the edges of the top complete all as shown on drawing, as specified and directed.

All as per item 1.01 here in but for sides of table bedside complete all as specified and directed.

S&F new legs to table bed side steel made of 18mm MS square pipe placed in position complete all as shown on drawing, as specified and directed.

S&F new CP steel 100mm long handle to the drawers of the table bed side steel placed in position complete all as shown on drawing, as specified and directed.

S&F new 6mm commercial ply at back of the table bed side steel fitted with screws complete all as shown on drawing, as specified and directed.

Renewal of upper drawer made of 18 mm thick commercial plywood BWR grade ISI marked duly pasted with 1 mm thick sunmica sheet in colour/shade as approved by GE provided with 6mm thick commercial plywood of BWR grade ISI marked at bottom complete all as shown on drawing, as specified and directed.

Renewal of lower drawer made of 18 mm thick commercial plywood BWR grade ISI marked duly pasted with 1 mm thick sunmica sheet in colour/shade as approved by GE provided with 6mm thick commercial ply BWR grade ISI marked at bottom complete all as shown on drawing, as specified and directed.

S&F new telescopic channel of best quality as approved complete all as specified and directed.

S&F new rubber shoes 18mm square of high quality placed in position complete all as shown on drawing, as specified and directed.

M&L Welding work wherever required as directed by EIC and GE complete all as specified and directed.

M&L Preparation of metal surface Table bed side steel by cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and Painting using spray Gun with one coat of synthetic enamel black paint over a coat of red-oxide primer complete all as specified and directed.

TABLE COMPUTER : FD/E6/MAP/03 AND TP : S&F following components of table computer including dismantling taking out carefully & renewal of old components with new components of table complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Renewal of of old existing broken table top of any description with new table top of 18/19 mm thick commercial plywood BWR grade ISI marked duly pasted with 1 mm thick sunmica sheet shall be pasted on ply board without nails, colour/shade as approved by GE with 6 mm thick teakwood half round beading all around complete all as specified and directed.

All as per srl item No. 2.01 here-in-before but bottom shelf of Table computer complete all as specified and directed.

All as per srl item No. 2.01 here-in-before but vertical board on side of Table computer complete all as specified and directed.

All as per srl item No. 2.01 here-in-before but keyboard tray of Table computer complete all as specified and directed.

All as per srl item No. 2.01 here-in-before but drawer of Table computer complete all as specified and directed.

All as per srl item No. 2.01 here-in-before but pull out mouse tray of Table computer complete all as specified and directed.

Removing of old unserviceable telescopic channel of key board and S&F new stainless steel telescopic channel to Table computer complete all as specified and directed.

S&F new knobs to Table computer complete all as specified and directed.

S&F new handles to Table computer complete all as specified and directed.

S&F new Nylon buffers to Table computer complete all as specified and directed.

M&L Welding work wherever required complete all as specified and directed.

M&L Preparation of metal surface Table Computer by cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and Painting using spray Gun with one coat of synthetic enamel black paint over a coat of red-oxide primer complete all as specified and directed.

TABLE DINING (ORS) (2100 X 900 X 760) : FD-165 (M) : S&F following new components of table including dismantling taking out carefully & renewal of old components with new components of table complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Renewal of old existing broken table top of any description with new table top of 18/19 mm thick commercial plywood BWR grade ISI marked duly pasted with 1 mm thick sunmica sheet in colour/shade as approved by GE complete all as specified and directed.

Renewal of legs of table with new legs made out MS 25 mm square tube 16 Gauge complete all as specified and directed.

Renewal of top frame long rail with new Top frames long rail made out of MS 25 mm square tube, 16 Gauge complete all as specified and directed.

Renewal of top frame short rail with new Top frames short rail made out of MS 25 mm square tube, 16 Gauge complete all as specified and directed.

Renewal of side stiffener with new stiffener made out of MS 25 mm square tube, 16 Gauge complete all as specified and directed.

Renewal of foot rest with new foot rest made out of MS 25 mm square tube, 16 Gauge complete all as specified and directed.

M&L Welding work wherever required complete all as specified and directed.

Renewal of rubber shoe with new hard rubber shoe of superior quality complete all as specified and directed.

M&L Painting to table dining with one coat of synthetic enamel paint over a coat of red oxide primer after cleaning dusting scratcing with emery paper, making surface neat & smooth complete all as specified and directed.

TEAPOY VARANDHA : FD-35(M), FD-208, FD-255, FD-383 : S&F following components of Teapoy Verandah including dismantling taking out carefully & renewal of old components of teapoy with new component Complete complete all as shown on drawing, as specified and directed. Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Renewal of old existing broken top of any description with new table top of 18/19 mm thick commercial plywood BWR grade ISI marked duly pasted with 1 mm thick sunmica sheet , colour/shade as approved by GE with 3 mm thick teakwood round beading complete all as specified and directed.

S&F new 25mmx3mm flat iron on top of legs of length 800mm welded to existing flat iron at top placed in position complete all as shown on drawing, as specified and directed.

S&F new 25mmx3mm flat iron on top of legs of length 250mm welded to existing flat iron at top placed in position complete all as shown on drawing, as specified and directed.

Renewal of legs of table with S & F new legs complete all as specified and directed.

S&F PVC hard rubber shoes of best quality for Tea poy Verandha complete all as specified and directed.

M&L Welding work wherever required complete all as specified and directed.

M&L Preparation of metal surface teapoy verandah by cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and Painting using spray Gun with two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

TEAPOY VERANDAH : FD/E6/MAP/17 : S & F following components of Teapoy Verandah including dismantling taking out carefully & renewal of old components with new components of teapoy complete all as shown on drg, specified and directed:- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Renewal of old existing broken table top of any description with new table top of 18/19 mm thick commercial plywood exterior grade ISI marked pasted with 0.6 mm thick sunmica sheet, colour/shade as approved by GE with 3 mm thick teakwood beading all around complete all as specified and directed.

Renewal of Mild Steel square tube 18mm of 20 gauge as legs of teapoy fixed with necessary welding, grinding etc complete all as specified and directed.

S&F new 5mm dia MS bars at base tray with proper welding with frame of tray complete all as shown on drawing, as specified and directed.

S&F PVC hard rubber shoes of best quality for Teapoy Verandha complete all as specified and directed.

M&L Welding work wherever required complete all as specified and directed.

M&L Preparation of metal surface teapoy verandah by cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and Painting using spray Gun with two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

TABLE 900X900X760 WITHOUT DRAWERS : FD-1009 : S & F following components of table including dismantling taking out carefully & renewal of old components with new components of table complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Renewal of old existing broken table top of any description with S&F new table top of 18/19 mm thick commercial plywood exterior grade ISI marked pasted with 0.6 mm thick sunmica sheet, colour/shade as approved by GE with 6 mm thick teakwood half round beading all around complete all as specified and directed.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge complete all as shown on drawing, as specified and directed.

Stiffeners complete all as shown on drawing, as specified and directed.

Shoes all complete all as shown on drawing, as specified and directed.

M&L Welding work wherever required complete all as specified and directed.

M&L Preparation of metal surface teapoy verandah by cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and Painting using spray Gun with one coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

SIDE RACK W/TRAY 3 SPACES STEEL : FD-97(M), FD-408, FD-1023 : S&F following components of table including dismantling taking out carefully & renewal of old components with new component of table complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

S&F new sides to rack three tiers steel made of 1mm thick MS sheet of size 355mmx710mm fixed in between vertical angle iron with nut and bolts complete all as shown on drawing, as specified and directed.

S&F new shelves to rack six tiers steel made of 1mm thick MS sheet of size 840mmx355mm made to shape and fixed in between opposite vertical angle iron with nut and bolts complete all as shown on drawing, as specified and directed.

M&L Welding work wherever required complete all as specified and directed.

M&L Preparation of metal surface side rack/tray by cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and Painting using spray Gun with two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

STEEL TABLE OFFICERS/CLERK OF SORTS : FD-84(M), FD-381, FD-1002, FD-1003, FD-1004 : S&F following components of table including dismantling taking out carefully & renewal of old components with new components of table complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Renewal of old existing broken officers table top of any description with new table top of 18/19 mm thick commercial plywood exterior grade ISI marked pasted with 1 mm thick sunmica sheet, in colour/shade as approved by GE with 4 mm thick teakwood half round beading complete all as specified and directed.

All as per item 8.01 here in but top of table clerk complete all as specified and directed.

Renewal of drawer with S&F new table drawer made to shape, fixed in position all as shown on drg, specified and directed with Locking arrangement i.e. Key holes etc complete all as specified and directed.

Dismantling, taking out carefully old existing broken unserviceable locks with key cover of any description & S&F new Locks with double key fix with suitable 4mm dia screws complete all as shown on drg, specified and directed.

Renewal of Leg made out of Mild steel 25mm square tube 16 gauge thick complete all as shown on drawing, as specified and directed.

Renewal of stiffener made of Mild steel 25mm square tube 16 gauge thick complete all as shown on drawing, as specified and directed.

Renewal of standard PVC Handle complete all as shown on drawing, as specified and directed.

M&L Welding work wherever required complete all as specified and directed.

Renewal of rubber shoe with new hard rubber shoe of superior quality complete all as shown on drawing, as specified and directed.

M&L Preparation of metal surface Table office officer by cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and Painting using spray Gun with two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M&L Preparation of metal surface Table clerk by cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and Painting using spray Gun with two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

STEEL LOCKER OF SORTS : FD-127(M), FD-257, FD-1029, CWE/ BPL/53 : S&F following components of locker including dismantling taking out carefully & renewal of old components with new components of locker complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Renewal of Handle with new Chromium plated handle complete with nuts and pins omplete all as shown on drg, specified and directed.

Renewal of legs with new legs complete all as shown on drg, specified and directed.

Renewal of shelf with new shelf complete all as shown on drg, specified and directed .

Renewal of new C.P. conduit pipe 20 mm dia for locker steel or sorts complete all as shown on drg, specified and directed .

Renewal of with new Chromium plated safety type hasp & staples all as shown on drg, specified and directed .

Door shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size) complete all as specified and directed.

Renewal of hinges of steel locker with new hinges complete all as shown on drg, specified and directed.

M&L Welding work wherever required complete all as specified and directed.

M&L Preparation of metal surface locker by cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and Painting using spray Gun with two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

ALMIRAH STEEL LARGE 1/2 HANGING 1/2 SHELVING : FD-114(M), FD-1033, FD/E6/MAP/18 S&F following components of almirah including dismantling taking out carefully & renewal of old components with new components of almirah complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Dismantling, taking out carefully old existing broken unserviceable Locks with key cover of any description and S&F new Locks six levers, with double key including new key cover complete on external face of Almirah & suitable 4mm dia screws complete all as shown on drg specified and directed.

Renewal of three way locking device with new three way locking device complete with fixing accessories for steel almirah large complete all as specified and directed.

Renewal of shelf of almirah with new shelf made out of 1.00 mm thick MS sheet complete fitting with nut & washer complete all as shown on drawing, as specified and directed.

Renewal of almirah door shutter with new mild steel 1mm thick door Shutter including making shape, moulding etc complete all as shown on drawing, as specified and directed.

Renewal of Handle with new Chromium plated handle complete with nuts and pins complete all as specified and directed.

Renewal of legs of steel almirah large with new leg complete all as shown on drawing, as specified and directed.

Renewal of hinges of steel almirah large with new hinges complete all as shown on drg, specified and directed.

M&LWelding work wherever required complete all as specified and directed.

M&L Preparation of metal surface Almirah by cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and Painting using spray Gun with two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

STEEL ALMIRAH LARGE : FD-67(M), FD-351, FD-1031 S&F following components of almirah including dismantling taking out carefully & renewal of old components with new components of almirah complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Dismantling, taking out carefully old existing broken unserviceable Locks with key cover of any description & renewal of the same with new locks six levers, with double key including new key cover complete on external face of Almirah & suitable 4mm dia screws complete all as shown on drg specified and directed.

Renewal of Handle with new Chromium plated handle complete with nuts and pins complete all as shown on drawing, as specified and directed.

Renewal of three way locking device with new three way locking device complete with fixing accessories for steel almirah large complete all as shown on drawing, as specified and directed.

Renewal of legs of steel almirah large with new legs complete all as shown on drg, specified and directed.

Renewal of shelf of steel almirah medium with new shelf complete all as shown on drg, specified and directed.

Renewal of almirah door shutter with new mild steel 1mm thick door Shutter including making shape, moulding etc complete all as shown on drawing, as specified and directed.

Renewal of hinges of steel almirah large with new hinges complete all as shown on drg, specified and directed.

M&L Welding work wherever required complete all as specified and directed.

M&L Preparation of metal surface Almirah by cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and Painting using spray Gun with two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

STEEL ALMIRAH MED : FD-243 : S&F following components of almirah including dismantling taking out carefully & renewal of old components with new components of almirah complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Dismantling, taking out carefully old existing broken unserviceable locks with key cover of any description & renewal of the same with new Locks six levers, with double key including new key cover complete on external face of almirah & suitable 4mm dia screws complete all as shown on drg specified and directed.

Renewal of Handle with new Chromium plated handle complete with nuts and pins complete all as shown on drawing, as specified and directed.

Renewal of three way locking device with new three way locking device with fixing accessories complete all as shown on drg, specified and directed.

Renewal of legs of steel almirah medium with new legs complete all as shown on drg, specified and directed.

Renewal of shelf of steel almirah medium with new shelf complete all as shown on drg, specified and directed.

Renewal of almirah door shutter with new mild steel 1mm thick door Shutter including making shape, moulding etc complete all as shown on drawing, as specified and directed.

Renewal of cleat with new cleat made out of Mild steel sheet 2mm thick as per drg and fixed all as specified and directed.

M&L Welding work wherever complete all as specified and directed.

M&L Preparation of metal surface Almirah by cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and Painting using spray Gun with two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

CHAIR WRITING OFFICERS : FD/E6/MAP/12 : S&F following components of chair including dismantling taking out carefully & renewal of old components with new components of chair complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Removing unserviceable damaged Seat & back of Chair writing or same pattern and S&F new seat & back made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine complete all as shown on drg, specified and directed.

Removing old unserviceable arm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert complete all as specified and directed.

Taking out unserviceable/broken frame and S&F new frame duly painted complete all as shown on drawing, as specified and directed.

Welding work wherever required complete all as specified and directed.

Removing the old broken shoes of chairs and S&F best quality new PVC shoes to the legs of chair complete all as shown on drawing, as specified and directed.

M&L Preparation of metal surface of chair by cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and Painting using spray Gun with two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

CHAIR VERANDAH:- FD-19, FD-256, FD-359, FD/MAP-II/06 S&F following components of chair including dismantling taking out carefully & renewal of old components with new components of chair complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Removing the existing unserviceable cane/niwar plastic from the seat and back of chair and recanning the seat and back of chair with plastic cane 3.5mm to 4mm wide of 1st quality, white colour in pure godrej pattern complete all as shown on drawing, as specified and directed. Note : The canning of chairs shall only be carried out after completion of painting process.

Removing the existing unserviceable/broken PVC seat and back from the chair verandah MAP(JCO/ORs) and S&F new PVC seat and back 4mm thick duly approved by GE including flat iron support 20mmx4mm in centre of seat by proper welding complete all as shown on drg, specified and directed.

Renewal of legs of chair with new legs made out of 16 Gauge MS sheet complete all as shown on drg, specified and directed.

M&L Welding work wherever required complete all as specified and directed.

Removing the old broken shoes of chairs and S&F best quality new PVC shoes to the legs of chair complete all as specified and directed.

M&L Preparation of metal surface of chair by cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and Painting using spray Gun with two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

TABLE 900X600X760MM WITH DRAWERS : FD-1008 : S & F following components of table including dismantling taking out carefully & renewal of old components with new components of table complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Renewal of old existing broken table top of any description with S&F new table top of 18/19 mm thick commercial plywood exterior grade ISI marked duly pasted with 0.6 mm thick sunmica sheet, colour/shade as approved by GE with 4 mm thick teakwood half round beading all around complete all as specified and directed.

Renewal of legs with new mild steel square tube of size 25mm of 20 gauge of height 760mm or as per table complete all as shown on drawing, as specified and directed.

Renewal of Stiffeners with new stiffeners complete all as shown on drawing, as specified and directed.

M&L for renewal to Drawer include tinkering/denting, painting, welding, etc complete all as shown on drawing, as specified and directed.

Renewal of Lock with new lock complete all as shown on drawing, as specified and directed.

Renewal of Shoe with new shoe complete all as shown on drawing, as specified and directed.

M&L Welding work wherever required complete all as specified and directed.

M&L preparation of old treated metal surfaces of table and applying two coats of synthetic enamel Paint using spray gun internally and externally complete all as specified and directed.

TABLE 3'X 2' STEEL WITHOUT DRAWER : FD-1007 : S&F following components of table including dismantling taking out carefully & renewal of old components with new components of table complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Renewal of of old existing broken table top of any description with S&F new table top of 18/19 mm thick commercial plywood BWR grade ISI marked duly pasted with 1 mm thick sunmica sheet, colour/shade as approved by GE with 6 mm thick teakwood half round beading all around complete all as specified and directed.

Renewal of Legs with new mild steel square tube of 25mm of 20 gauge 760mm height complete all as shown on drawing, as specified and directed.

Renewal of Stiffeners with new stiffener complete all as shown on drawing, as specified and directed.

Renewal of Shoes with new shoes complete all as shown on drawing, as specified and directed.

M&L Continuous Gas welding as required per 10 CM length complete all as specified and directed.

M&L Preparation of metal surface of table by cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and Painting using spray Gun with two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

BOOK CASE STEEL : FD-90(M), FD-1028, FD-1047 : S&F following components of book case including dismantling taking out carefully & renewal of old components with new components of book case complete all as shown on drg, specified and directed:- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Renewal of shelf with New Shelf complete all as shown on drawing, as specified and directed.

Removing of unserviceable lock and S&F new lock of existing pattern with two keys complete all as specified and directed.

Renewal of handle with new C P handle complete all as specified and directed.

Removing of unserviceable back and S&F new back complete all as specified and directed.

Removing of unserviceable sides and S&F new sides complete all as specified and directed.

Removing of unserviceable top and S&F new top complete all as specified and directed.

Removing of unserviceable bottom and S&F new bottom complete all as specified and directed.

Removing of unserviceable shutter and S&F new shutter complete all as specified and directed.

M&L Repair/adjustment to existing shelf including welding, tinkering etc complete all as specified and directed.

Taking out broken glass pane from shutter and S&F new 4mm pane glasses keeping the shutter freely swinging up and rolled in all as directed.

M&L Welding work wherever required complete all as specified and directed.

M&L Preparation of the old decorated/painted surfaces of the book case with removing all dents, filling with putty and spray painting (using spray gun) one coat of synthetic enamel paint, External & Internal surfaces complete all as specified and directed.

RACK STEEL : FD-106(M), FD-1039 : S&F following components of rack including dismantling taking out carefully & renewal of old components with new components of rack complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

S&F in renewal of shelves to rack of 1mm thick MS sheet fixed in between opposite vertical angle iron with nut and bolts complete all as shown on drawing, as specified and directed.

M&L Welding work wherever required complete all as sepecified and directed.

M&L Preparation of the old decorated/painted surfaces of steel rack with removing all dents, filling with putty and spray painting (using spray gun) one coat of synthetic enamel paint approved colour, External & Internal surfaces complete all as specified and directed.

CHAIR SCHOOL WITH HARD BOARD : FD/E6/MAP/05 : S&F following components of chair including dismantling taking out carefully & renewal of old components with new components of chair complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Renewal of one piece seat and back with new seat & back complete all as shown on drawing, as specified and directed.

S&F renewal of openable top MDF board exterior grade (Grade I, Type-II) ISI marked 18 mm thick duly post-formed with 0.6 mm thick laminate in colour/ shade as approved by GE with 2 mm thick PVC edging shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete top openable with PVC edging (Hinged on RHS) screwed to 25mm dia hollow steel pipe inserted in 20mm dia MS rod welded to frame complete all as shown on drawing, as specified and directed.

S&F in renewal of MS bars at base tray with proper welding with frame of tray complete all as shown on drawing, as specified and directed.

S&F in renewal of shoes of high quality placed in position complete all as shown on drawing, as specified and directed.

M&L Welding work wherever required complete all as specified and directed.

M&L Preparation of metal surface of chair by cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and Painting using spray Gun with two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

RACK SIX TIERS STEEL : FD-106(M), FD-129(M), FD-1038 : S&F following components of rack including dismantling taking out carefully & renewal of old components with new components of rack complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

S&F renewal of shelves to rack made of 1mm thick MS sheet of size 915mmx610mm made to shape and fixed in between opposite vertical angle iron with nut and bolts complete all as shown on drawing, as specified and directed.

M&L Welding work wherever required complete all as specified and directed.

M&L Preparation of the old decorated/ painted steel surfaces of the rack with removing all dents, filling with putty and spray painting (using spray gun) one coat of synthetic enamel paint of approved colour, External & Internal surfaces, complete all as specified and directed.

COMPOSITE OFFICE TABLES WITH VEENEERED PARTICLE BOARD OF SIZES (1500 X 900 X 750MM), (1200 X 600 X 750MM) ,(1350 X 750 X 750MM) TP : S&F following components of table including dismantling taking out carefully & renewal of old components with new components of table complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

M&L Dismantling, taking out carefully & renewal of old existing broken table top of Table 1500 x 900 x 750mm of any decription & renewal of the same with new table top of 18mm thick commercial plywood BWR grade ISI marked duly pasted with 1 mm thick sunmica sheet in colour/ shade as approved by GE with including 8mm thick Ist class teak wood moulded design, beading alround, made to shape, fixed in position complete all as shown on drawing, as specified and directed.

M&L Dismantling, taking out carefully & renewal of old existing broken table top of Table 1200 x 600 x 750mm of any decription & renewal of the same with S&F new table top of 18mm thick commercial plywood BWR grade ISI marked duly pasted with 1 mm thick sunmica sheet in colour/ shade as approved by GE with including 8mm thick Ist class teak wood moulded design, beading alround, made to shape, fixed in position complete all as approved, shown on drg, specified and directed.

M&L Dismantling, taking out carefully & renewal of old existing broken table top of Table 1350 x 750 x 750mm of any decription & renewal of the same with new table top of 18mm thick commercial plywood BWR grade ISI marked duly pasted with 1 mm thick sunmica sheet in colour/ shade as approved by GE with including 8mm thick Ist class teak wood moulded design, beading alround, made to shape, fixed in position all as approved, shown on drg, specified and directed.

Renewal of drawer with new table drawer made out of 20 Gauge PBI sheet made to shape, channel where drawer run smoothly, locking arrangement key holes etc fixed in position complete all as shown on drawing, as specified and directed.

Renewal of Lock with new Lock with Duplicate Key, complete all as shown on drawing, as specified and directed.

S&F in renewal of Leg made out of mild steel square pipe 25mm MS square pipe,16 gauge complete all as sepecified and directed.

S&F in renewal of Stiffener made out of mild steel square tube 25mm, 16 gauge complete all as shown on drawing, as specified and directed.

S&F in renewal of hard rubber shoe of superior quality complete as approved and all as shown on drgs, specified and directed.

M&L for welding work wherever required complete all as specified and directed.

M&L Preparation of old decorated steel surfaces of the table (after repairs) with removing all dents, filling with putty and Spray painting (using spray gun) one coat of synthetic enamel paint of approved colour, External & Internal surfaces, complete all as specified and directed.

STEEL ALMIRAH SMALL : FD-67(M, FD-350, FD-1032 : S&F following components of almirah including dismantling taking out carefully & renewal of old components with new components of almirah complete all as shown on drg, specified and directed :- Note :- 25% Spare Part of Furniture/Paint/Polish of each item to be stored at BSO Yard before execution of work to avoid complication and the same after exhaust of earlier furniture maintenance part/paint/polish etc.

Dismantling, taking out carefully old existing broken unserviceable Locks with key cover of any description & renewal of the same with new Locks six levers, with double key including new key cover complete on external face of Almirah & suitable 4mm dia screws complete all as shown on drg specified and directed.

S&F in renewal of Handle Chromium plated with nuts and pins etc complete all as shown on drawing, as specified and directed.

S&F in renewal of three way locking device with fixing accessories for steel almirah medium complete all as shown on drawing, as specified and directed.

S&F in renewal of legs of steel almirah medium complete all as shown on drg, specified and directed.

S&F in renewal of shelf of steel almirah medium complete all as shown on drg, specified and directed .

S&F in renewal of Door Shutter made of 1mm thick Mild Steel sheet complete all as shown on drg, specified and directed.

S&F in renewal of Cleats made of 2mm thick MS sheet complete all as shown on drg, specified and directed.

S&F in renewal of hinges of almirah complete all as shown on drg, specified and directed.

M&L Welding work wherever required complete all as specified and directed.

M&L Preparation of metal surface almirah by cleaning, dusting and scratching the entire metal surface with sand paper, making surface neat and smooth and Painting using spray Gun with two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M/s Manish Contractor (BID ID -3124388)

M/s Bansal Brothers and Co. (BID ID -3136863)