Providing minihighmast near Dodmani hall ang repair work at Turmari layout ward no 02 of Dharwad division.

Providing minihighmast near Dodmani hall ang repair work at Turmari layout ward no 02 of Dharwad division.

Fabricating, supplying and erection of . ms long hot dip

Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355

JO steel plate for shaft, IS 2062 for base plate with door opening

arrangements, ...

Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...

Centering, shuttering, formwork for foundation,sub structure of cross drainages. 5% of the finished concrete item rate

Providing and laying in position Reinforced cement concrete for all foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. 4.6.2) Single Arm Bracket with 1500 m...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supplying & fixing of Porcelain fuse channel with cut out

on existing wooden/panel using necessary nuts, bolts and

washers. 5.7.2) 32Amps

Supply and fixing of 3 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts,washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 5.13.1)...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing Microprocessor based Electronic timer

(without contactor, Din Mounting using necessary bolts,

nuts and washers etc.,.) 3-120sec setting.

Supplying and fixing hylum plastic sheet 3mm thick with

necessary nitches for fixing switches, regulators etc., and

fixing on existing wood or metal box using N.F. screws.

Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The cond...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantle...

Removing and Resetting existing Heavy Duty Cobble/Interlocking stones/ Pavers of thickness 60/75/80/100mm using cement and 40mm thick sand bed (average thickness) and compacting with plate vibrator to...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Crane Charges iii. Usage Charges of Machinery Item No 21 Crawler mounted Crane 35 t capacity (For releasing old 3 No poles )

1.1kV LTUG XLPE Insulated Cables as per IS-7098 with following parameters & as per BESCOM Requirements

H2 H4 grade Aluminium Conductor having purity of 99.7

Conductor Resistivity of 0.028264 mmm

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff

21.05) 2.5 to 25 Sqmm Basic Rate - 18608=00 ASL 5% - 930=40 Over...