Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.0 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹37.6 L+₹90,975 (2.48%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹38.9 L+₹2.2 L (5.87%)Rejected-AOC | L3 | Rejected-AOC Other than lowest bidder | |
| 4 | L4₹39.2 L+₹2.5 L (6.71%)Rejected-AOC | L4 | Rejected-AOC Other than lowest bidder | |
| 5 | L5₹39.4 L+₹2.6 L (7.21%)Rejected-AOC VILL PO KUMARHATTI DIST SOLAN HP | SOLAN | SOLAN | HIMACHAL PRADESH | L5 | Rejected-AOC Other than lowest bidder |
Tender Value
₹43.9 L
EMD Value
₹87,840
Closing Date
27 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rahul Meena IDSE EE Garrison Engineer
GARRISON ENGINNER KASAULI DIST SOLAN HP
ADDITIONAL ALTERNATION OF STEEL OR WOODEN DOOR AND WINDOWS INTO ALUMINIUM DOOR AND WINDOWS FOR OFFR/JCO MD ACCN AT SOLAN MIL STATION UNDER GE KASAULI
2023_MES_631089_1
GEK-95/2023-24
Open Tender
Civil Works
Item Rate
180 days
SOLAN UNDER GE KASAULI
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE KASAULI
₹87,840
Yes
23 Jan 2024
5 Dec 2023
29 Dec 2023
5 Dec 2023
27 Dec 2023
20 Dec 2023
Amount
Schedule 'A' Section - I
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.50 sqm & not exc 4.00 sqm each and removing from site incl making good the disturbed surfaces with plaster (CM 1:3) and painting (OBD/Apex/CBP as per existing) with using wall putty provide smooth surface after fixing new chowkhats, complete all as specified & directed by Engineer-in-Charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exc. 1.5sqm each and removing from site incl making good the disturbed surfaces with plaster (CM 1:3) and painting (OBD/Apex/CBP as per existing) with using wall putty provide smooth surface after fixing new chowkhats, complete all as specified & directed by Engineer-in-Charge.
Taking down shutters of any description exc 1 sqm but n.exc 2 sqm from chowkhat and removing at site as equired complete all as specified & directed by Engineer-in-Charge.
S&F 125x60mm pressed steel frames 1.25mm thick for doors, windows with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts etc.
S&F 105x60mm pressed steel frames 1.25mm thick for doors, windows, cupboards with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts etc.
M&L for providing cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in filling chowkhats, plinth courses, copings, kneelers, apex stones, bed plates etc including necessary form work complete all as specified and directed.
S&F Factory made plain, framed, panelled shutters, 35mm thick of 2nd class hard wood (Hollock) with lock rail and panels of 9mm thick commercial ply or 12mm thick vaneered particle board with commercial veneered on both sides, incl priming coat, duly hammer marked. The size of rail & style shall be as per IS 1003 part-1 kiln seasoned and chemically pressure treated incl one coat of pink primer complete all as specified & directed by Engineer-in-Charge.
M&L for 30 to 35 mm thick glazed and Skelton shutter of 1st class softwood (Hollock) open rebated and prepared to receive glass,gauge etc divided into squares(08 Nos) with plain chamfered or rounded mitred and rebated sash bars any number, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, supplied and fitted to chowkats all as specified.
S&F Aluminium alloy, anodised sliding door bolts 300 mm long with hasp and staple(bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, ISI marked, complete all as specified and directed.
S&F, aluminium anodised barrel tower bolts of extruded section, 200mm, ISI marked, complete all as specified and directed .
S&F, aluminium anodised barrel tower bolts of extruded section, 150mm, ISI marked, complete all as specified and directed .
S&F, extruded aluminium alloy handles with plates, fabricated type, anodised 150 mm size, ISI marked, complete all as specified and directed .
S&F double leaged floor door stopper of over all length of cover plate 140 mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified
S&F Door seal strip with plastic beading, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
S&F Door closer hydraulically regulated, Aluminium (extruded section) body, designation No. 2, universal type, suitable for door shutters of 701 to 851 mm in width and of weight between 61 to 80 kg and fixed, complete all as spd and directed.
S&F stainless steel steel wire cloth 0.36mm nominal dia of wire and 1.40mm aparture fixed with tinned tackes or stainless steel wire staples and including fixing with beads (iron/wood flats) supplied with joinery when fixed in panels of joinery. , complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface over 10cm width or girth including preparation.
M&L for preparation of new wooden surfaces & applying two coats of synthetic enamel paint over a coat of pink primer after complete filling, all as specified.
S&F Powder coated (Colour & Texture as directed) aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) frames with extruded built up standard tubular sections/ appropriate Z sections and other sections (Size as directed) of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F Powder coated (Colour & Texture as directed) aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators (of any type i.e. side hung, top hung, slidling & fixed type etc.) with including providing and fixing stainless steel hinges/ pivots/ fasteners/ stays/ rollers with its channels and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Note: Prelaminated board, wire mesh and glass to be measured & paid separately.
S&F Anodised colour powder coated aluminium grill, opening of grill 50 mm approx. & above and thickness 6.3 to 8 mm (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge.
S&F for 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5sq. m in each pane complete all as specified and directed
S&F for 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5sq. m in each pane complete all as specified and directed
S&F for 5.00 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane.
S&F for Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples to aluminium window/vent/door shutters etc complete.
S&F extruded brass handle, fency type, fabricated type, polished bright, of size 150 mm long complete.
S&F extruded brass tower bolts, fency type, fabricated type, polished bright, of size 150 mm long complete.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M&L for Vitrified ceramic tiles light shade 8 to 10mm thick (square/rectangular) polished area of each tiles exceeding 0.36 sqm in floors/skirting, set and jointed in neat cement slurry and pointed in white or colored cement to match with the tiles incl. 15mm thick screed bed or bedding layer in C.M 1:6 etc complete all as specified & as directed.
M&L for Joint free glazed ceramic coloured tiles 300mm x 450mm x 7mm thick on vertical surface of walls set and jointed with neat cement slurry @ 3.00 Kg / Sqm and pointed in white cement with pigment to match the shade of tiles, over 10mm thick rendering in CM 1:4, complete all as specified and directed by Engr-In- Charge.
Amount of credit of Rs. 69755.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.
M/S CHOPRA & COMPANY
M/S GURENDER SINGH
M/S Trilok chand sharma
Vishal Builder
ashu enterprises
CHADHA ENGINEERS
Satyadev Builders
dhiraaj construction company
KUNDRA CONSTRUCTIONS
RADHA ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .