PanchayatOfficeKottaikudi

Amount

Construction of Panchayat Office building at Kottaikudiyiruppu village in Thiruppakottai Panchayat.

Earth work Excavation in all classes of soils such as hard stiff clay. Stiff block hard red earth, shales, murram, gravel, stoney earth expect hard rock requiring blassing and depositing on bank with all leads and lifts and all incidental charges such as storing shuddering and balling out water in necessary etc., completed for foundation as SS 20B.

Sand filling in to the basement including cost and conveyance to the site and all labour charges for filling as per standard speecifications

Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost & conveyance of all materials to of which will be r labour for mixing laying compacting curing concrete and all other incidental charges etc., complete for foundation.

Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Brick Work in cement mortar 1:5 mix using country bricks of size (8 ¾ x 4 ¼ x 2 ¼) including cost & conveyance of all materials to site including cost of cement which will be supplied by departmental section store at Sivagnagai and the cost there of will be recovered from the contractors bill as per special conditions including labour charges incidental charges and curing etc., complete for super structure.

Supply and fabrication of steel as per IS432/1960 (Tested Quality) including fabrication charges for all RCC items schedule in the tender including cost of steel which will be supplied by the department section store and the cost will be typing wires, space bars cover blocks and all other incidental charges etc., completed.

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete.,(Below GL)

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete.,(Above GL)

RCC 1:1.5:3 mix using 20mm ISS HBG metal including cost & conveyance of all materials to work site and including cost of cement which will be supplied and departmental section store attend the cost will be record from contractors bill at the rate of specified in the special conditions appended and including all other incidental charges etc., completed but executing cost and conveyance of steel fabrication charges and centering complete for lintel, plinth beam, sunshade & Roof slab.

RCC 1:1.5:3 mix using 20mm ISS HBG metal including cost & conveyance of all materials to work site and including cost of cement which will be supplied and departmental section store attend the cost will be record from contractors bill at the rate of specified in the special conditions appended and including all other incidental charges etc., completed but executing cost and conveyance of steel fabrication charges and centering complete for lintel, plinth beam, sunshade & Roof slab.

Providing granolithic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum

Dadooing of walls with glazed tiles of size 15 cm x15cmx6mm laid in CM 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2 -10Sqm

weathering course with Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete for 10 cum

pressed Tiles with brick jelly lime concrete using 20mm brick jelly with pure slacked lime over R.C.C. roof slab in the proportion of 32:12.5 and finshed with one course of pressed tiles of size 23x23x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc

Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work).

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and approved colour over a priming coat including through scrapping, clean removal of dirt and including necessary plaster of pairs putty, wherever required etc complete complying with standard specification

Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Supplying and fixing P.V.C rainwater down fall pipe of 110m dia with necessary shoes, bends,& clamps etc.,

Wiring with 2x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall an ceiling PVC accessories in flush with wall with 3mm thick hylum shet cover with TW switch box and 5 A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light / fan point (for electronic regulator) (5 points per coil) (SD 25)

Supply and fixing of WT bulk head fitting with guard (philips/ Bajaj/ crompton/ K.Lite) suitable for 11W CFL lamp with CFL (SD 83)

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals tot he fitting with tube

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp (SD 110)

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed CU. conductor of 1100 v grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x 100x113 mm TW switch box for 5 A3 pin non inter locking wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14SWG TC wire for open PVC plug point (SD 36)

Supply and fixing of 32 Amps DP Switch of 500 V with metal clad with fuse and neutral (Side Handle) on suitable TW Board , with earth connection only (SD 144)

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8") copper flat) on TW plank of size 375mmx300mmx19mm with supporting TW reepers of 1" thick an either side with paining with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD 125)

Wiring with 2 x 1.5sq.mm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour for open PVC light point/ fan point (For electronic Regulator) (SD 17)

Paving the floor with vitrified tiles in CM 1:3 including all charges etc complete

PVC Storage tank including all charges etc complete

supplying laying and jointing PVC pipe above ground level (external) - 32mm dia PVC pipe

Supplying laying and jointing PVC pipe Above Ground level (External) - 25mm dia PVC pipe

Supplying and fixing in position of Indian Type water closet 580x440mm of approved qualtiy

Supply and fixing of Steel rolling shutters including cost and conveyance to work site and labour charges etc complete

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supply of Door size 1.10m x 2.10m

Supply of Door 1 size 0.75m x 2.10m

Supply of Door 2 size 1.00m x 1.80m

Supply of Window size 1.20 x 1.30m

Supply of Window 1 size 1.50 x 1.30m

Supply of Gril Gate size 1.20 x 2.10m

Drilling of borewells in anywhere in Tamlnadu including transportations from one place to another place within the circle juristiction Alluvial soil of sedimentary starta of calyx and sand or sand stone stale, febbles, boulders etc; by first taking a Drilling 140/150mm pilot bore upto 60m depth ending below ground level

Reaming from140/150mm pilot bore to 300mm dia bore 0upto 60m depth ending from G.L.

Supply of 150 MM dia (O.D) PVC ribbed borewell casing (pipe Plain Pipe (CS))

Supply of 150 MM dia (O.D) PVC ribbed borewell casing (pipe Slotted (RS))

Labour charges for inserting the casing pipes assemble with or without slotting in the drilled hole supplying and packing the annular space with pebbles of size and quantity

Charges for development of bore well air compressor of 300 CFM capacity including transportaion charge fuel etc., and ascertaining the yield of the bore well as directed by department officers developed abore well 8hrs minimum

Provision for End Cap 160mm dia (pwd SI no 202 C.d)

Supply & delivery of vertical type submersible1 HP pumpset of discharge 15 lpm against a total head of 15X 80 m suitable for borewell conforming to IS 8034/2002 and as amended from time to time with ISI mark with all asccessories and suitable panel Boards

Single Phase Auto Start Guard Panel Board

Supply and delivery of 2.5 sqrm PVC copper flat submersible cable

32mm dia UPVC Column Pipe

40mm dia M.S. Clamp set

32MM G.M Gate value

32mm dia GI bend

32 MM dia G.i Hex Nipple

50 MM Non return value

Labour charges for erection of 1 HP submersible pumpset in Borewell including fixing and jointing of submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps pressure guage upto the exterior wall of the pumproom and erection of the Board consisting of TPICN switch starter volt meter ammeter, 3 pilot (indicating) capacitor, single phasing preventor water level guard and laying and jointing the cable and twin earthing as per IE rules etc. complete and testing the pumpset on trail run for 3 days including signing the completion reports as required by EB authorities. (P.No:243)S.I.N0. 17

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}