Repair and polishing of all types of wooden furniture at Mil Stn Patiala under GE(S) Patiala

Amount

TEAPOY (FD-382 & FD-278) M&L for carrying out repair/replacement of following parts of Teapoy as per drawing after dismantling the old parts complete all as specified :-

Supplying and fixing legs of Teak wood .

Supplying and fixing long rails of Teak wood.

All as per Serial item No.1(b) hereinbefore but short rails.

Supplying and fixing top of 18/19mm thick prelaminated particle board ISI Marked standared make (action tesa/arched/novapan) exterior grade and 6mm thick Teak edging all around.

Supply and fixing stiffners of Teak wood.

Applying two coat of french polish to Teapoy after necessary preparation of surfaces .

PEG TABLE (FD-384 & FD277) M&L for carrying out repair/replacement of following parts of Peg Table as per drawing after dismantling the old parts complete all as specified :-

Supplying and fixing the legs of Teak wood.

Supplying and fixing long rails of Teak wood.

Supplying and fixing short rails of Teak wood.

Supplying and fixing top of 18/19 mm thick prelaminated particle board ISI Marked standared, Make (Action tesa/Archid/Novapan) exterior grade and 6mm thick Teak edging alround. .

Applying two coat of french polish to complete peg table after necessary preparation of surfaces.

TABLE BED SIDE (FD-276) M&L for carrying out repair/replacement of following parts of Table bed side as per drawing after dismantling the old parts complete all as specified :-

Supplying and fixing the legs of Teak wood .

Supplying and fixing of 12 mm thick ply wood at sides with one side teak finish. make(Natianal/Duro/Green ply).

Supplying and fixing of 6 mm thick ply wood commercial at back make(Natianal/Duro/Green ply).

Supplying and fixing of 12 mm thick ply wood commercial at bottom make (Natianal/Duro/Green ply).

Supplying and fixing of 12 mm thick ply wood commercial at shelves make (Natianal/Duro/Green ply).

Supplying and fixing top of 18/19mm thick prelaminated particle board ISI Marked standared make (Archied/Novapan) exterior grade and 6 mm thick Teak edging alround the front and top.

Applying two coat of french polish to complete table bed side including necessary preparation of surfaces.

TABLE 900 x 600 x 760 mm WITH DRAWER (FD-290) M&L for carrying out repair/replacement of following parts of Table 900 x 600 x 760 mm with drawer as per drawing after dismantling the old parts complete all as specified :-

Supplying and fixing legs of Teak wood .

Supplying and fixing the long rails of Teak wood.

Supplying and fixing the short rails of Teak wood.

Supply and fixing of long stiffener of teak wood as per drg

Supply and fixing of short stiffener of team wood as per drg

Supplying and fixing drawer complete

Supplying and fixing top of 18/19mm thick prelaminated particle board ISI Marked standared make (action tesa/arched/novapan) exterior grade and 6mm thick Teak edging all around .

Supply and fixing of knob CP as per drg

Applying two coat of french polish to complete table with drawer after necessary preparation of surfaces.

TABLE DINING FOR 6 PERS (FD-273) M&L for carrying out repair/replacement of following parts of Table dining for 6 pers as per drawing after dismantling the old parts complete all as specified :-

Supplying and fixing the top of the table with 18/19mm thick prelaminated particle board ISI Marked standared make (action tesa/archid/novapan) and providing 6mm thick Teak beading all around as in top of the table.

Supplying and fixing of legs made of Teak wood.

Supplying and fixing of long rails of Teak wood.

Supplying and fixing of short rails of Teak wood.

Supplying and fixing of triangular wooden bracket 100X100X20mm thick

Applying two coat of french polish after preparation of surfaces.

TABLE WRITING (FD-275) M&L for carrying out repair/replacement of following parts of Table writing as per drawing after dismantling the old parts complete all as specified :-

Supplying and fixing top of the table with 18/19mm thick prelaminated particle board ISI Marked standared make (action tesa/arched/novapan)as in top of the table including 6mm thick Teak beading all around.

Supplying and fixing legs of Teak wood,

Supplying and fixing long rails of Teak wood.

Supplying and fixing drawer complete

Supplying and fixing of shutters and drawers of 18/19mm prelaminated particle board exterior grade, fixed with 2 Nos Hinges medium weight 75 mm with locking arrangements and handles all as shown in Drg.

Sides of cabinet with 18mm thick pre-laminated particle board as per drg

Supplying and fixing of stiffeners of Teak wood.

Applying two coat of french polish after preparation of surfaces.

TABLE 900mmx600mmx760mm WITHOUT DRAWER (FD-284) M&L for carrying out repair/replacement of following parts of Table 900mmx600mm as per drawing after dismantling the old parts complete all as specified :-

Supplying and fixing top of the table with 18/19mm thick prelaminated particle board ISI Marked standared make (action tesa/arched/novapan) exterior grade as in top of the table including 6mm thick Teak beading all around .

Supplying and fixing of legs of Teak wood.

Supplying and fixing of long side rails of Teak wood.

Supplying and fixing of short side rails of Teak wood.

Supplying and fixing of stiffeners Teak wood.

Applying two coat of french polish after preparation of surfaces.

TABLE DRESSING GENTS WITH MIRROR (FD-230) M&L for carrying out repair/replacement of following parts of Table Dressing Gents With Mirror as per drawing after dismantling the old parts complete all as specified :-

Supply and fixing top and sides of 18/19mm thick block board ISI Marked standared make (action tesa/arched/novapan) commercial covered with 1mm thick plastic laminated sheet.

Supply and fixing 18/19mm thick block board ISI Marked standared make (action tesa/arched/novapan)commercial bottom partition including 4mm thick teakwood beading.

Supply and fixing drawer's of table.

Suuply and fixing mirror with frame of Teak wood.

Applying two coat of french polish after preparation of surface .

HAT STAND WITH MIRROR (FD-233) M&L for carrying out repair/replacement of following parts of Hat Sstand with mirorr as per drawing after dismantling the old parts complete all as specified

S&F mirror shall be 55mm thick standard quality ATUL/Sanit Gobain duly electro copper plated on back shall be provided on the Black board.

S&F Teak board to be provided to the Hat stand.

S&F CP cap stand hoocks to be provided.

All exposed surfaces shall be french polished.

STOOL DRESSING CB (FD-282) M&L for carrying out repair/replacement of following parts of Stool dressing CB as per drawing after dismantling the old parts complete all as specified

S&F legs of first class Teak wood

S&F stiffner teak wood .

S&F side long rail teak wood

S&F side short rail teak wood

Applying french Polishing two coat complete the stool dressing CB.

BED PLY WOOD TOP (FD- 246) M&L for carrying out repair/replacement of following parts of Bed Ply Top as per drawing after dismantling the old parts complete all as specified

S&F Long rail made out of first class hard wood (Teak).

S&F short rails made out of first class hard wood (Teak) as per drg

Head Board complete with legs

Foot Board complete with legs

S&F Ply wood top made out of 12mm thick commercial ply wood of ISI marked .Make : National/Kitply

Teak Face Ply of Size 04mm of Head Wing Board.

Teak Face Ply of Size 04mm of foot Wing Board.

Stiffners made out of Teak wood.

Cleaning and preparing old polished surface of Bed ply top and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge.

SIDE BOARD (FD-241) M&L for carrying out repair/replacement of following parts of Side Board as per drawing after dismantling the old parts complete all as specified

S&F in replacement following parts to side board , complete all as specified and shown on drgs after removing the old broken part.

Top made out of 18mm thick prelaminated particle board exterior grade, phenyl formoldehyde bonded, flat pressed three layer BWR type-II, Make : action tesa/arched/novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

S&F Legs made of teak wood .

S&F Back made out of 6mm thick commercial ply wood

S&F side made out of 6mm thick commercial ply wood

S&F Front of drawers made out of 18mm thick prelaminated particle board

S&F Door shutters made out of 18mm thick block board with 6 mm thick teak wood edging all around of doors

Cleaning and preparing old polished surface of side board wooden and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge.

TABLE DRESSING LADIES WITH MIRROR (FD-251) M&L for carrying out repair/replacement following parts to table dressing ladies with mirror, complete all as specified and shown on drgs after removing the old broken part.

S&F Mirror 5.5mm thick electro copper plated of polished plate size 365x1220mm.

S&F Frame of mirror made out of teak wood of size 25 x 19mm.

S&F Top made out of 18mm thick prelaminated particle board exterior grade, phenyl formoldehyde bonded, flat pressed three layer BWR type-II, Make : action tesa/arched/novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

S&F legs made out of first class hard wood (teak) as per drg

S&F Drawers of table.

S&F Sliding glass of table.

S&F chnnel made out of aluminum for fixture for siliding glass.

Cleaning and preparing old polished surface of table dressing ladies with mirror and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge.

TABLE CENTRE/TABLE CENTRE TWO TIER (FD-274) M&L for carrying out repair/replacement following parts to table centre, complete all as specified and shown on drgs after removing the old broken part.

Top 900x450mm made out of 18mm thick prelaminated particle board exterior grade, phenyl formoldehyde bonded, flat pressed three layer BWR type-II, Make : action tesa/arched/novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

S&F Legs made out of first class hard wood (Teak)

S&F Long rails made out of first class hard wood (Teak)

S&F Short rails made out of first class hard wood (Teak)

S&F Stiffners of 2 tier table made out of first class hard wood (Teak)

Cleaning and preparing old polished surface of table centre and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge.

TABLE DINING FOR 8 PERSONS (FD-273) M&L for carrying out repair/replacement following parts to table dining for 8 persons, complete all as specified and shown on drgs after removing the old broken part.

Top 1800x900mm made out of 18mm thick prelaminated particle board exterior grade, phenyl formoldehyde bonded, flat pressed three layer BWR type-II, Make : action tesa/arched/novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

S&F Legs square shape made out of first class hard wood (Teak).

S&F Long rails made out of first class hard wood (Teak)

S&F Short rails made out of first class hard wood (Teak)

Triangular wooden bracket 100X100X20mm thick

Cleaning and preparing old polished surface of table dinning 8 pers and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge.

SOFA SET THREE SEATER/SINGLE SEATER WITH DETACHABLE CUSHION (FD-281/ FD-373) M&L for carrying out repair/replacement of following parts of Sofa set three seater /single seater with detachable cusjion as per drawing after dismantling the old parts complete all as specified

S&F of long rails of seat for three seater sofa of size 1590mmx100mmx35mm of 1st class hardwood (teak) duly plained and smoothed with sand paper.

do but Side rail of back size 575mm x 100mm x 35mm.

All as per Srl Item no.19 a above but back long rail of back of size 1590mm x 70mm x 35mm.

do but Side rail of sea tbut single seat size 575mm x 100mm x 35mm.

All as per Srl Item above but back of single seat long rail of back of size 575 mm x100mmx35mm.

S&F in replacement of arms for Single / Three seater sofa of size 35mm x 70mm (cross section) of 1st class hard wood (MP Teak) complete all as specified and shown on drgs after removing the old broken arms.

do but batten of size 50mm x 20mm.

M&L for applying two coat of french polish after preparation of surface complete to sofa 3 seater

M&L for applying two coat of french polish after preparation of surface complete to sofa single chair.

S&F sofa foam cushion 40 density, 100mm thick of standard size covered with tapestry cloth not less than Rs. 180/- per meter as approved by GE. MAKE : SLEEP WELL/COOL FOAM/FEATHER FOAM. Cushion cover duly stiched with one side Jip.

Foam Cushion cover only duly stiched and one side Jip size 530 x 560 mm as per sample approved by engineering in charge.

Chair writing/ CBA (FD-280 & 250) M&L for carrying out repair/replacement following parts to Chair writing/CBA, made out of 1st class hard wood (Teak) complete all as specified and shown on drgs after removing the old broken part.

S&F Front Legs.

S&F Rear Legs.

S&F Front Rails.

S&F Side Rails.

S&F Back Rails.

S&F Arms.

S&F Stiffners.

M&L for applying two coats of french polish to Chair writing/CBA after preparation of surface complete all as specified.

Chair Dinning (FD-279) S&F in replacement following parts to Chair Dinning/CBB, made out of 1st class hard wood (Teak) complete all as specified and shown on drgs after removing the old broken part.

M&L for carrying out repair/replacement of following parts of Chair Dining as per drawing after dismantling the old parts complete all as specified

S&F Front legs.

S&F Rear Legs.

S&F Front Rails.

S&FSide Rails.

S&F Back Rails.

S&F Stiffners.

M&L for applying two coats of french polish to Chair Dinning/CBB after preparation of surface complete all as specified.

Chair Easy (FD-229) S&F in replacement following parts to Chair Easy, made out of 1st class hard wood (Teak) duly french polished complete all as specified and shown on drawings after removing the old broken part.

M&L for carrying out repair/replacement of following parts of Chair Easy as per drawing after dismantling the old parts complete all as specified

S&F Front legs

S&F Front Rails of seat.

S&F Rear Rails of seat.

S&F Side Rails of seat.

S&F Back Rails of Back.

S&F Side Rails of Back.

S&F Arms of Chair easy

M&L for applying two coats of french polish to Chair Easy after preparation of surface complete all as specified.

Recanning of Chairs of all type M&L for removing old broken cane and recanning of Chairs with plastic cane (oval shape) 2mm wide and border with 2mm wide cane complete as per Godrej pattern using Make : SHAH/RPEMIER brand cane (removing of old broken cane shall be done at BSO yard) as per specified in drg.

Recanning of stool dressing CB (FD-282)

Recanning of chair writing (FD-280 & 1107)

Recanning of chair dinnig (FD-279)

Recanning of chair easy (FD-229 & 1108)

BOOK CASE (FD-237) M&L in replacement following parts to Book Case, complete all as specified and shown on drgs after removing the old broken part all as specified.

S&F of short rail teak wood.

S&F of long rail teak wood.

S&F of Top of 18/19mm pre laminated partical board Make Action Tesa/ Kit Ply/ National.

S&F of shelf left side of 12 mm teak partical board Make Action Tesa/ Kit Ply/ National.

S&F of other side 19 mm partical board of teak wood Make Action Tesa/ Kit Ply/ National.

S&F of legs of teak wood

S&F of shutter with knob of one ball spring

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

TABLE DINING 120 X 90 CM (FD-284) M&L for carrying out repair/replacement of following parts of Table 120 x 90 cm as per drawing after dismantling the old parts complete all as specified :-

Supplying and fixing top of the table with 18/19mm thick prelaminated particle board ISI Marked standared make (action tesa/arched/novapan) exterior grade as in top of the table including 6mm thick Teak beading all around.

Supplying and fixing of legs of Teak wood.

Supplying and fixing of long side rails of Teak wood.

Supplying and fixing of short side rails of Teak wood.

Supplying and fixing of stiffeners Teak wood.B163

Applying two coat of french polish after preparation of surfaces.

Chair Dinning MAP (FD/MAP-II/05) S&F in replacement following parts to Chair Dinning MAP, made out of 1st class hard wood (Teak) complete all as specified and shown on drgs after removing the old broken part.

M&L for carrying out repair/replacement of following parts of Chair Dining as per drawing after dismantling the old parts complete all as specified

S&F Front legs.

S&F Rear Legs.

S&F Front Rails.

S&F Side Rails.

S&F Back Rails.

S&F Stiffners.

S&F PVC seat for chair dining (MAP) make as approved by GE. MAKE : AMKO

M&L for applying two coats of french polish to Chair Dinning/CBB after preparation of surface complete all as specified.

M/s Harmans

Arneja Builders