COMPREHENSIVE REP REPL TO INT ELECTRIFICATION SYSTEM INCL ATTENDING DAY TO DAY MAINTENANCE and CEILING FANS, GEYSERS, EXHAUST FANS, BUILDING DBS, LIGHTING, EARTHING ETC OF CERTAIN OTM ACCN and MD ACCN AT SRINAGAR COLONY AREA UNDER AGE EM-I OF GE MINN

Amount

M&L for taking down carefully existing aluminium point wiring (light, fan, socket or power) complete fittings fixture such as switches Ceiling roses, pendents,regulators, sockets etc to be measured separately)unscrewing from Board/outlet boxes, fittings & fixtures such as switches, sockets, ceiling rose lamp holder tube/ceiling fitting, bulk head fittings, tube lights & regulator etc and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.

M&L for taking down carefully existing old DBs and making good disturbed surfaces of walls to match the existing surfaces complete all as specified and as directed

M&L for taking down unserviceable submain wiring alongwith batten/PVC/steel conduits etc and making good disturbed surfaces of walls/ floors to match the existing surfaces all as specified and as directed.

M&L for point wiring (modular type) with two run of PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm (FRLSH), PVC conduit medium grade/ PVC casing caping and pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc) and drawing one run of 1.5 sqmm PVC insulated unsheathed multistranded copper conductor cable (FRLSH) as earth continuity wire in green colour connected to common earth and each terminal box/fitting all as specified and as directed by Engr-in-Charge. (In ceiling Portion surface conduit wiring shall be carried out.) Note: The quoted rate inclusive for the following :- (a) GI metal flush box and Modular cover plate with frame of any module complete. (b) Proper colour coding is to be followed as per IS Specification. (c) wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cutting chases/making good disturbed surfaces of wall for fixing concealed conduit wherever required will be measured and paid separately.

One light point controlled by one one way switch.

One fan point controlled by one one way switch.

One 3 pin socket outlet 5/6 Amps independent.

One 3 pin socket outlet 5 Amps on the same board with other switches

One light point controlled by two 2-way switches.

One bell/ buzzer point controlled by one push button

All as per item No 4.00 above but cable with 4.0 sqmm size for socket outlet 15 amps, independent.

M & L for submain wiring with two single core PVC insulated unsheathed multistranded copper conductor cable of size 6 sqmm (FRLSH) and one single core PVC insulated unsheathed multistranded copper conductor cable green colour of size 6 Sqmm (FRLSH) as earth lead in and including concealed with PVC conduit medium grade of suitable size or surface wiring with PVC casing caping of suitable size and making good the disturbed wall surfaces to match with existing specification including takind down unserviceable submain wiring complete all as specified and as directed. Note : (i) Three run of cable with one run of PVC conduit/PVC casing and caping will be measured as one length. (ii) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement. (iii) Cutting chases/making good disturbed surfaces of wall for fixing concealed conduit wherever required will be measured and paid separately.

All as per item No. 6.00 here-in-before but with 4.0 sqmm cable complete all as specified and as directed.

All as per item No. 6.00 here-in-before but with 2.5 sqmm cable complete all as specified and as directed.

All as per item No. 6.00 here-in-before but with 1.5 sqmm cable complete all as specified and as directed.

S&F in repair of ceiling Rose, 3 terminal polycarbonate isolated body complete all as specified and as directed.

S&Fin repair of modular switch one way 6 Amps, 1 module complete all as specified and as directed

S&F in repair of modular switch two way 6 Amps, 1 module complete all as specified and as directed

S&F in repair of modular switch one way 16 Amps, 1 module complete all as specified and as directed.

S&F in repair of modular bell push 6 Amps, 1 module complete all as specified and as directed.

S&F in repair of modular socket, 2/3 pin 6 amps, 2 module complete all as specified and as directed.

S&F in repair of modular socket, 2/3 pin 6/16 amps, 2 module complete all as specified and as directed.

S&F as in repair LED lights fitting 20W, >120lm/watt, CCT value 4000K to 6500K, surge protection of 2 KV, 4 feet 220V, AC IP-20, aluminium housing with inbuilt driver including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F as in repair LED lights fitting 20W, 100lm/watt, CCT value 3000K, surge protection of 2 KV, 4 feet 220V, AC aluminium housing with inbuilt driver including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F as in repair LED 20W inverter batten type fitting 3/4 feet long aluminium extruded housing, charging time 10-12 Hrs with 04 Hrs backup,IP-20 ,rated voltage 230 V, 50 Hz, system wattage 20W +/- 10%, system current less than 102 mA, power factor more than 0.95, system lumen efficiency 100lm/watt,CCT 6500K, CRI more than 80, THD less than 30%, driver efficiency more than 85% complete all accessories prewired and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F as in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 120lm/watt, CCT value 4000K to 6500K, 220 V AC aluminium housing with inbuilt driver including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F as in repair round LED surface downlighter 15 watt, warm white 220V, 1200lm, CCT value 3000K complete all as specified and as directed.

Supply and fixing as in repair LED oval shape single head wall light 20 Watt max, metal body, CCT value 3000K including lamp complete all as specified and as directed.

Supply & fixing as in repair LED luminaire 600mm X 600mm, 36 watt, 220V AC, 3600 lm, 6500K, recessed type with high efficiency PMMA diffuser soft glare free light complere with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Note for item No 17.00 to 23.00 : (i) Driver efficiency more than 85% (Constant current driver) (ii) Non isolated type driver (iii) THD less than 20% (iv) LED driver current less than 60 mA (v) Efficiency of LED Chip more than 130 lm/watt (vi) Efficiency of LED Fixture 100 lm/watt (vii) Surge protection 2.0 KV & above as per IEC standard (viii) working humidity 95%RH (ix) Life 50000 Hrs at 70% lumes (x) CRI more than 80 (xi) Working temp -10 degree to 50 degree C (xii) Heat Sink extruded aluminum (xiii) junction temperature 85 degree C (xiv) Body of fitting Extruded Aluminum (xv) impact code Min IK 03 or more ( xvi) LM79 report from thir party (instead of company in house lab) NABL/UL accredited lab (xvii) LM 80 report from LED manufacturer (xviii) Low/High voltage, reverse polarity, overload and short circuit protection inbuilt in fixture (xviiii) IP-20 .(xx) Test certificates to be submitted before commencement of work/ claiming for payment .(xxi) Warranty certificate for minimum 2 years to be submitted from OEM.

S&F as in repair LED bulb 9 watt, B22 complete all as specified and as directed

Supply and fixing as in repair LED inverter bulb 12 Watt, CDL, 220V AC complete all as specified and as directed.

S&F as in repair lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F as in repair Bell, Ding Dong AC, 230 Volts omplete all as specified and as directed

Supply and fixing in replacement MCCB DB VTPN 4 way IP-54, IK-09 made of sheet steel phos phatised, powder painted with suitable rated bus bar as per OEM design, neutral link, earth bar and Din rail 415 Volts with double door, suitable for MCCB 4 Pole 100 Amps as incomer and MCB Single Pole as outgoing complete all as specified and as directed.

Supply & fixing in replacement sheet metal enclosure with TPN MCB DB's 4 way (grouted in walls) double door type IP-54, IK-09 Protection. Isolated Neutral, Door earthing, with suitable rated bus bar as per OEM design including suitable size of copper ferrules for fixing of cable complete all as specified and as directed.

Supply & fixing as in repair MCB DB's SPN 4 way, IP-54, IK-09 double door, sheet metal enclosure, 240V, with suitable rated bus bar as per OEM design including suitable size of copper ferrules for fixing of cable complete all as specified and as directed.

Supply & fixing as in repair MCB DB's SPN 8 way, IP-54, IK-09 double door, sheet metal enclosure, 240V, with suitable rated bus bar as per OEM design including suitable size of copper ferrules for fixing of cable complete all as specified and as directed. Note for item srl No 29.00 to 32.00 : (i) MCCB and MCB will be measured and paid separately. (ii) The cost for flushing of Distribution box in any type of wall and making good disturbed surfaces with existing colour shall be deemed to be included in the quoted rate

Supply and fixing as in repair Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed.

S&F as in repair MCCB 4 Pole, 415V, Adjustable type, 100 to 125 Amps with breaking capacity 16 KA complete all as specified and as directed.

S&F as in repair MCB TPN 40 to 63 Amp, C series, 415V, 10 KA complete all as specified and as directed.

S&F as in repair RCBO 25-40 Amps, double pole 240V, AC type, 30 mA complete all as specified and as directed.

S&F as in repair MCB SP 6-32 Amps ,10 KA, B Curve, 230 Volts ,50 HZ complete all as specified and as directed.

S&F as in repair Surge Protection Device, breaking capacity 40KA/Pole, 4 Pole with sheet metal enclosure complete all as specified and as directed.

Supply ,Installation ,Testing & Commissioning as in repair Microprocessor based Single phase tamper proof electronic smart energy meter( pre paid/ postpaid)rating with 2 wire 240 Volts, 50 HZ, of range 5-60 Amps, confirming to IS 16444 with DLMS protocol , LED/LCD display and parameters like Voltage, Current, Frequency, Power, Power factor, KWh/ KVA,Network work topology GPRS/LONG RANGE RF compatible for smart energy billing system both post paid and prepaid all as specified and as directed by Engr- in- Charge Note : (i) Old unserviceable meter will be deposited to MES store yard. (ii) The scope of integration of digital smart meter with server/software is not included in quoted rate and it will be considered separately.

Supply and fixing as in repair thermoplastic/ Polycarbonate/ sealed moulded meter box, IP-43.00, weather proof & water proof single door with locking arrangement, transparent meter viewing window glass suitable for smart single phase meter complete all as specified and as directed.

M&L for cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed PVC Conduit etc., and making good, cutting not exceeding 10 cm girth etc., including making good disturbed surfaces with existing wall colour complete all as specified and as directed.

M&L for carrying out internal wiring test with all T&P such as megger, clamp meter/multi meter etc., by opening of main DBs/TPN DBs/SPN DBs disconnecting of phase and neutral cable connection, fittings, fixtures carrying out testing for insulation values, reconnecting the disconnected cable connections, fittings and fixtures including replacement of defective copper ferrules, insulation peeled off wires with insulation tape complete all as specified and as directed. Note : (i) The cost of copper ferrules and insulation tape shall be deemed to be included in the quoted rate. (i). The inspection shall be carried out in presence of JE E/M, I/C Elect(HS)/MCM detailed by JE E/M with user's signature. (ii) Each room will be measured as one job.

Repair, maint and making the continuity of supply after rectifying the defects of the electrical items such as switches, sockets, bell push, ceiling roses, metal/PVC flush boxes, modular cover plate with frame and other similar electrical items/fittings etc. including providioning of small pieces of electrical wire if required of size 1.5 sqmm to 2.5 sqmm single core and length not exceding 0.50 mtrs complete all as specified and directed by Engineer-in-Charge. (Note :- (i) any accessories found unserviceable that shall be paid as supply only under respective items of this Sch 'A' . (ii) One job only will be considered for each bldg/Qtr per day irrespective of the No of points made serviceable.(iii) The area for attending the complaints are Minnie Bay area (iii) Each complaint attended/rectified shall be measured as one job. (iv) The contractor shall depute necessary man power on daily basis for rectifying the jobs including sundays and holidays.

Supply only switch piano, flush type, single pole, one way 6 Amp for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only switch piano, flush type, single pole, two way 6 Amp for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only bell push, flush type 5/6 amps for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only switch socket combination 2 in 1, 6 Amp flush type for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only ceiling Rose, 3 terminal polycarbonate isolated body for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only modular switch one way, 6 Amps, 1 module for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only modular switch one way, 16 Amps, 1 module for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only modular socket, 2/3 pin, 6 amps, 2 module for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only modular socket, 2/3 pin, 6/16 amps, 2 module for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only modular metal/PVC flush box 3 module for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only modular metal/PVC flush box 6 module for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only modular white cover plate with frame 3 module for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only modular white cover plate with frame 6 module for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only socket outlet 2 in 1, 3 pin, 6 and 16 Amp flush type for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only socket outlet 2 in 1, 6 Amp flush type for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only modular fan regulator 120W for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only fan regulator flush type for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only metal clad plug 20 Amp 3 pin for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only FRLSH PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm , cut to size all as required at site for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only FRLSH PVC insulated unsheathed multistranded copper conductor cable of 2.5 sqmm , cut to size all as required for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only FRLSH PVC insulated unsheathed multistranded copper conductor cable of 4.0 sqmm , cut to size all as required at site for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only FRLSH PVC insulated unsheathed multistranded copper conductor cable of 6.0 sqmm , cut to size all as required at site for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Supply only Plug top 3 pin, 16A, 240V for carrying out repairs under relevant Sch 'A' item No. 43.00 complete all as specified and as directed

Material and labour for earthing with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to galvanised iron strip 25 mm x 4 mm by means of GI Welding made out of galvanised iron mild steel and 40 mm dia GI pipe "light grade" for protection of earth lead and connected to control board or transformer neutral earth or as directed including earthing pit in PCC (1:3:6) type C-1, pre-cast reinforced cover with MS XPM Jalli, RCC 1:1.5:3 cover slab of size 300 x 300 x 100 mm with one handle made out of 8 mm dia round bar 20 mm dia GI pipe medium grade for watering funnels , wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work complete shown in electrical plated No 3 and testing complete all as specified and as directed by Engineer-in -charge. NOTE : (i) The earthing pit should be provided with proper earth pit and pit cover. (ii) If the desired earth resistance is not achive during testing as per IS the complete earthing shall be carried out by the contractor at his own cost and no extra claim shall be admissable.

M&L for taking down ceiling fan of any sweep, sealing cable end, dismantling blades, painting of ceiling fans complete with white synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc., including fixing at the same position and provision of cable from ceiling rose or connector to fan complete all as specified and as directed.

M&L for taking down ceiling fan of any size/make for repairing and fixing of ceiling fan at same place after repairing including provision of cable from ceiling rose or connector to fan complete all as specified and as directed. Note : The items required for repair shall be measured and paid separately.

Supply only Ball Bearing No. 6201 for carrying out repairs under relevant Sch 'A' item No. 70.00 complete all as specified and as directed

Supply only Ball Bearing 6202 for carrying out repairs under relevant Sch 'A' item No. 70.00 complete all as specified and as directed

Supply only MS Shaft for carrying out repairs under relevant Sch 'A' item No. 70.00 complete all as specified and as directed

Supply only Canopy (Top & Bottom) for carrying out repairs under relevant Sch 'A' item No. 70.00 complete all as specified and as directed

Supply only Blade of size 1200 mm for carrying out repairs under relevant Sch 'A' item No. 70.00 complete all as specified and as directed

Supply only heavy duty steel rubber ceiling fan clamp with nut bolt and locking pins complete for carrying out repairs under relevant Sch 'A' item No. 70.00 complete all as specified and as directed

Supply and fixing as in repair Capacitor 2.5 Mfd complete all as specified and as directed.

S&F as in repair PCB suitable for BLDC ceiling fan of any make/model as per OEM design complete all as specified and as directed.

Supply & fixing as in repair ceiling fan 1200mm sweep with blades, suitable BLDC remote electronic regulator as per OEM design, down rods and connected accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM, 5 star rated, equipped with brushless direct current motor (BLDC) of wattage < 28W including provision of cable from ceiling rose/connector to fan including taking down old unserviceable ceiling fan and deposited to MES store yard complete all as specified and as directed.

M&L for taking down exhaust fan of any size/make for repairing and fixing of exhaust fan at same place after repairing including provision of cable from ceiling rose or connector to fan complete all as specified and as directed. Note : The items required for repair shall be measured and paid separately under relevant items

Supply only Bush copper suitable for exhaust fan 300/450 mm for carrying out repairs under relevant Sch 'A' item No. 80.00 complete all as specified and as directed

Supply only MS Shaft suitable for 300 mm sweep exhaust fan for carrying out repairs under relevant Sch 'A' item No. 80.00 complete all as specified and as directed

Supply only Exhaust fan blade of size 300mm for carrying out repairs under relevant Sch 'A' item No. 80.00 complete all as specified and as directed

S&F as in repair exaust fan louver aluminium suitable for hole size 300mm fixing up to 3rd floor complete all as specified and as directed. Note : Necessary scaffolding for fixing of louvre shall be deemed to be included in the quoted rate

S&F as in repair fresh air exhaust fan of size 200 mm, 230V, RPM 1400, PVC body complete all as specified and as directed.

S&F as in repair fresh air exhaust fan of size 250 mm, 230V, RPM 1400, PVC body complete all as specified and as directed.

S&F as in repair metallic exhaust fan of size 300 mm with louvre, 230V, RPM 1400, metal body including taking down old unserviceable exhaust fan and deposited to MES store yard complete all as specified and as directed.

M&L for taking down and dismantling of geyser of any size/make for repairing and fixing of geyser at same place after repairing including making good disturbed surfaces complete all as specified and as directed. Note : The items required for repair shall be measured and paid separately under relevant items

Supply only thermostat suitable for geyser 25 ltrs capacity for carrying out repairs under relevant Sch 'A' item No. 88.00 complete all as specified and as directed

Supply only Heating element 2 KW suitable for existing make/model of geyser for carrying out repairs under relevant Sch 'A' item No. 88.00 complete all as specified and as directed

Supply only indicating lamp (Red/Green) for carrying out repairs under relevant Sch 'A' item No. 88.00 complete all as specified and as directed

Supply only Geyser pressure safety relief valve for carrying out repairs under relevant Sch 'A' item No. 88.00 complete all as specified and as directed

Supply and fixing as in repair Stainless steel geyser connection pipe for hot/cold water 450mm long with brass end nuts suitable for 15mm dia GI tubing complete all as specified and as directed

Supply & fixing as in repair electric water heater, storage type, electro plated steel body as per OEM design with element free induction heat transfer technology through induction coil capacity 25 litre, BEE 5 star rated with reduction heating time 10-12 mins and with digital temperature display, live temperature with smart mode, automatic operation of water heater for on and off time complete with all accessories such as safety valve, thermostat, NRV, connection piece fastner bolts including stainless steel hose pipe including taking down old unserviceable geyser and deposited to MES store yard complete all as specified and as directed.

S&F as in repair metallic Air circulator 450mm, RPM 1440 including provision of cable from ceiling rose/connector to fan including taking down old unserviceable air circulator and deposited to MES store yard complete all as specified and as directed.

S&F as in repair metallic Air circulator 600mm, RPM 1440 including provision of cable from ceiling rose/connector to fan including taking down old unserviceable air circulator and deposited to MES store yard complete all as specified and as directed.

Tropical Refrigeration (BID ID -3303469)

SKY GROUP (BID ID -3303788)

Blue chip consultancy Service (BID ID -3300389)

Kathir Marketing Services (BID ID -3303530)

MK ENGINEERING (BID ID -3302550)

M/s Gurunath Construction (BID ID -3303360)

PTech Engineers (BID ID -3302080)