NIT No GE/ND-74/2024-25

Amount

B&R PORTION: Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n. exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

Exavation in post holes (for similar holes) each n.exc 0.5 cum, getting out, returning,filling in and remming each of broken rubble mixed with earth aroundin layers not exc 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed.

M&L Cement concrete Type C-2 1:3:6 (using 40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n. exc 25 CM in any type of soil complete all as specified and directed.

Removing excavated meterial n exc 50 m and depositing where directed at a level n exc 1.5 m above starting point in soils complete all as specified and directed.

M&L brick work with sub class ‘B’ brick, straight or curved on plan exceeding 6m means radius in CM 1:6 with old size bricks complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished using wpc (WPC shall be measured and paid separately) even and smooth without using extra cement (Externally) complete all as specified and directed.

M&L for 15mm thick rendering on fair or other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished complete all as specifeid and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion paint using roller brush (APEX ULTIMA) over one coat of primer and over incl one coat of Birla putty complete all as specified and directed.

M&L for Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper using roller brush on walls over a coat of primer and over incl one coat of 1.50mm thick Birla putty complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in copings, plinth course, damp proof course, bed blocks, benching, PCC cills and similar items complete all as specified and directed.

S&F 40 + 2 kg/cum density, 50mm thick panel consisting of 0.50mm TCT Lioydeck profiled coloured sheet on top and 0.5mm TCT plain PPGI sheet at the bottom with 50mm thick Puf sandwiched in between as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.80 mm thick of an colour having tensile strength of 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Steel work in tubular trusses, post round or rectangular pipes including special shaped washer etc complete using ERW or induction butt welded tubes confrming IS 1161-1979 grade St.-240, complete all as specified and directed.

M&L for mild steel framed work as in trusses, purlins, rafters etc including cleats, and steel plates, wind ties Fe-290 (Gde E?165) complete all as specified and directed.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wind ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and directed.

M&L for Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M&L for Cement concrete Type D-2 1:4:8 (using 40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for Applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation on new steel surfaces any description, not otherwise described over 10 cm width or girth complete all as specified and directed.

S&F for GI frame work for decoraive type seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspeneded from soffit at approx 900mm center to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm center to centre including providing and fixing Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish formulated jointing compound and 48mm wide fibre tape to provide seamless finish including preparation of newly surfaces of ceiling and applying two coats of oil bound distember over 1.5mm thick Brila/JK wall care putty complete all as specifeid and directed.

Demolition of cement concrete of any any description and in any position not otherwise speifically provided for any complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4, type B-1, (12.5mm graded stone aggregate) as in sub bsae floor finishing the cement concrete complete all as specified and directed.

M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm and upto 0.72sqm (1200x600mm) each, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr in charge

Demolition of brick work built in Cement morter or cement lime mortar incl all quoins, arches , pillar etc complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Dismantlling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles in vertical surface (1200x600mm), 8 mm thick with matching highlighter over and including 10 mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles (Design/colour of tiles will be approved by GE) complete all as specified and directed.

M&L for Granite (of any type) 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing with admixture of pigment to match with shade of granite, laid over and including 20 mm thick cement mortar 1:4 complete all as specifeid and directed.

M&L for 18 mm thick Steel Grey Granite Skirting of 100 mm wide of approved quality, colour & shade in specified size & pattern as per approved drawings at all floors & levels fixed to the correct line & level for lobbies etc., with required cement paste (upto 10mm thk) of desired consistency and joint to be filled with cement slurry mixed with pigment to match the shade of stone complete all as specified and directed. Note:- Rate shall be inclusive of surface preparation, cutting, rubbing, polishing, all lifts & lead, labour, tools and tackles, curing etc.

M&L for rounding the edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specifeid and directed.

Taking down chowkhats or frame with shutters without taking of shutters from frames exc 1.5 Sqm but not exc 4.00 sqm each & removing form site incl making good disturbed portion complete all as specified and directed.

Supply only water proofing compound liquid @ 200 ml per bag of cement complete all as specified and directed.

M&L for preparation of old plasterd wall surfaces and applying 1.5 mm thick JK / Birla wall putty as per manufactures instructions, surfaces to be finished even and smooth over a coat of alkali resisstane primer and applying two coats of exterior emulsion first quality (APPEX ASIAN/ Weather coat (BERGER)/ Weather shield (ICI) or equivelent as approved) of approved colour complete all as specified and directed.

M&L for preparation of old plastered wall surfaces and applying two coats of oil emulsion distember over 1.5mm thick Brila/JK wall care putty or till the surface smooth over a coat of alkali resistant primer complete all as specifeid and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floors pavings n exc 15 cm thickness below or above ground levels complete all as specified and directed.

M&L for Reinforced cement concrete 1:1.5:3 nominal mix, using 20mm crushed stone agg as in beams,roof beams, cantilevers,lintel over 1.5m span, bands, chajjas etc complete all as specified and directed.

Use and waste of form work to sides of concrete foundations footings base of columns, plinth beams ,roof beams, raft and raft beams, sides ansd soffits of foundation complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking bending spirally for hooping for coumns, hooking ends and binding with and includng mild steel wire (annealed) not les than 0.9 mm dia or secring with clips. (annealed) not less than 0.9mm dia, complete all as specified and directed.

M&L for Mild steel TMT bars (conforming to Fe 500/Fe 550) 6 to 8mm dia in stirrups cut to lengths bent to shape required including cranking bending and spirally hooping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia complete all as specified and directed.

M&L for 12mm thick toughned glass door/windows and end seal and fixed with stainless steel floor springs, 2nos of stainless steel handle 600mm long fancy type in each shutter fixed to glass door, heatching/flim of approved design on the glass complete all as specified and directed. Note: Floor spring and handles shall be measured and paid seprately as supply only items.

Supply only 32 mm dia 600 mm long handle suitable for glass door complete all as specified and directed.

Supply only Stainless steel body and internal machanism heavy duty concealed floor spring suitable for 12mm thick glass door 1.1 mtr span fixed on tiles or granite surface complete all as specified and directed

Supply and fix stainless steel body centre, top/bottom locking arragement suitable for glass door complete all as specified and directed

Dismantling wall and ceiling boards of any description as in panelling any thickness, including cover fillets in any surface complete all as specified and directed.

M&L for Providing " RAJSHRI" PVC SHEET WALL PANELLING of thickness 5mm ( ±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm ( ±0.25 ) thick Prelam PVC sheet. The panel & strips shall be Density of 600 Kg /Cum Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm ( ±0.25 ) thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed.

M&L for PVC 'L' angles fixed at where direction changed portion with adhessive or as per manufacture instruction complete all as specified and directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F 4mm thick pre coated Alluminium Composite Panel cladding sheet of approved colour and shape, joint filled with silicon sealant, fixed as per manufacturers instruction complete all as specified and directed.

E&M PORTION: M&L for point wiring with PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for one light/ fan/ exhaust fan point controlled by one no, one way 6 Amp switch complete all as specified and directed. Note: (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

All as per item No 51.00 above but One three pin socket outlet 6 amps point controlled by one no, one way switch on independent board complete all as specified and directed.

All as per item No 51.00 above but One three pin 6 Amp socket outlet point controlled by one no, one way switch on same board complete all as specified and directed.

All as per item No 51.00 above but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board complete all as specified and directed.

S&F modular switch 230/250 volts grade one way SP 6 Amp rating complete all as specified and directed.

S&F modular switch 230/250 volts grade one way SP 16 Amp rating complete all as specified and directed.

S&F modular socket out let shuttered type flush mounting type, 230/250 volts grade 2/3 pin 6 Amp combined 2 module type complete all as specified and directed.

S&F modular socket out let 230/250 volts grade 2/3 pin 16 Amp combined 2 module type complete all as specified and directed.

S&F PVC modular plastic body MCB protected socket 20 Amps with MCB SP upto 16 Amps 230 volts AC and plug top 16 Amps complete all as specified and directed.

S&F ceiling rose 3 terminal / PVC / Polycarbonate, insulated body complete all as specified and directed.

Supply and fixing flexible LED Strip light in 5mtr role. Strip must have 60 led's/mtr, CCT should be 2700K with 800 lms /mtr & max power consumption of 7.6W/Mtr. Luminous efficacy /mtr should be min 105 lm/W. Color consistency ≤3 & Lifetime (ta 25 C) @L70 to be 30,000hrs. Operating temp range -20~45 Deg C along with IP20 & IK03 protection. CRI >=80; R9 >= 0 with Class III protection complete all as specified and directed. Make: Philips Cat No Flex Cove G5 or equivalent of make as specified in PS.

M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 4 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.

S&F factory made sheet steel distribution boards, double door, SPN 12 way, concealed type, 240 volts AC with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed.

Supply and fixing flexible LED Strip light in 5mtr role suitable for outdoor lighting, CCT should be 3000K with 800 lms /mtr & max power consumption of 8.2 W/Mtr. Color consistency ≤5 & Lifetime (ta 25 C) @L70 to be 30,000hrs. Operating temp range -20~45 Deg C along with IP68 & IK03 protection. CRI >=80; R9 >= 0 with Class III protection complete all as specified and directed. Make: Philips Cat No Flex Cove G5 or equivalent of make as specified in PS.

Supply and fixing of MCB, 240V 10KA, B curve single pole 06 to 32 Amps complete with connection testing complete all as specified and directed.

Supply and fixing of MCB, 240V 10KA, B curve single pole and neutral 32 Amps complete with connection testing complete all as specified and directed.

Supply and fixing 7 watt Deep Recessed LED fixed/Adjustable downlighter. Luminaire made of die cast aluminium housing heat sink with Glossy Facetted diffuser. The luminaire should have CRI > 90 and CCT of 3000K. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 , THD <10%.Luminare Operating Temp should be -10 Degrees to 45 Degrees & Input Voltage Range to be 140-270V with Driver Efficiency min 85% & Surge protection of 4.0 KV. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters along with technical data sheets of product complete all as specified and directed. Make: PHILIPS Cat Part No SmartBright Accent PRO RS262B or equivalent of make as specified in PS.

S&F LED Tube Lightfitting of 20 Watt 230Volt(size 4 ft) complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. Make: Havells cat No LHEXARP7SN1W020 or equivalent of make as specified in PS.

Supply and fixing Chandelier of contemporay design & perfect blend of design balance and symmetry with 12 matte white opal glasses,Dia 76 * H50-189 CM having french gold finish suitable for G9 type lamp of 28 watt and 12 in Nos,lamp must be warm white complete all as specified and directed.

S&F 10 watt up down wall mounted lighter in aluminium housing with tempered cover IP -65 protection grade, water proof body,CCT-3000K,CRI>70 & 36 degree beam angle with PF>0.90 suitable for working from 160-270 Volt % 2 KV surge protection,declared life L70, 50 K burning hours complete all as specified and directed.

S&F 18 watt recessed LED UP lighter in aluminium housing with SS front ring & tempered glass cover IP -67 protection grade & IK 10 rating , water proof body,CCT-3000K,CRI>70 & 20 degree beam angle with PF>0.90 suitable for working from 110-240 Volt & 2 KV surge protection,declared life L70, 50 K burning hours complete all as specified and directed.

S&F LED Grandeur three head pendant hanging light fitting warm white of 10 Watt each lamp 230 Volt , with E27 holder type and brush bronze metal base with hammered glass complete with LED Light 10 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. Make: Philips Cat Part No 58072 or equivalent of make as specified in PS.

S&F LED Grandeur double wall light fitting warm white of 10 Watt 230 Volt , with E27 holder type and brush bronze metal base with hammered glass complete with LED Light 10 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. Make: Philips Cat part No 58071 or equivalent of make as specified in PS.

Supply and fixing wall mounted light Mirror/picture Light, metalic housing in Metal & Aluminum Housing in bronze finish with Flexible neck for adjusting beam & Superior bronze finish. Fixture should have min Dimensions (mm) L= 500 mm W= 80mm H= 95mm. fixture should be integral type suitable for 1 x12W LED in lamp with CCT 3000K. Fixure must comply to IEC 60598-1, IS 10322 (Part5/Sec1). System delivered lumen 420lm & surge protection of Min. 2.5KV with WIDE VOLTAGE PROTECTION Range of : 160V-360V complete all as specified and directed. Make: Philips Cat Part No 31403 Muziris 12W Picture Light or equivalent of make as specified in PS.

Supply & fixing of wall fan complete with blades,Frame and all connected accessories operating at 230 V with 400 mm sweep.,color as per site requirement.Making arrangement for hanging fans to wall with proper hook,nut,bolt with twin core twisted flexible copper conductor complete all as specified and directed.

S&F plastic body fresh air of size 230mm sweep with new fresh air fan 300 mm AC single phase 230 V 50 HZ with blades,frame,louver and other connected accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and making arrngement to fix the fresh fan with proper nut bolt complete all as specified and directed.

S&F factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way VTPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete all as specified and directed.

S&F MCCB 4 pole 100 Amp, 415 Volts, 16kA adjustable type including thimbles, nuts, bolts ,washers etc. and connections complete all as specified and directed.

sony engineering works (BID ID -3144285)

HANUMAN BUILDERS (BID ID -3150376)

M/S SONU ENTERPRISES (BID ID -3150439)

BEHAL TRADERS (BID ID -3150246)