Development of Udagamandalam lake water front with various amenities at Niligiris District

Amount

Civil Work

Clearning and removing the light jungles and clearing away from the site. complete as directed by the officers incharge.

Charges for providing Bore hole / drill hole of 0.30 m dia for a required depth upto 3.05m for the purpose of providing cast in situ pile foundation the rate is including labour charges for drilling and hire charges for machineries etc. complete as directed by the corporation officers.

Removing the existing paver block in the pathway with out damages and removing the soils alround the paver block and making for reuse etc complete complying with standard specifications.

Earthwork excavation for foundation in all soils and subsoils and to full depth as may be directed except hard rock requiring blasting inclusive of shoring shuttering, bailing water etc complete as directed by Corporation officers

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Plain Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

For foundation & basement

Above Ground floor

Supplying and erecting shuttering including necessary support using steel shutters for plain surfaces such as column footings, kerb wall and grade beam / plinth beam etc.requiring noimal strutting and removing the same after completion of specified period without disturbing the concrete etc. complete complying with standard specification

Supplying and erecting steel CENTERING including necessary supports for strutting upto 3.29m height for plane surface as detailed below in all floors with all cross bracing using mild steel sheets of size 90cmx60cm and 10BG stiffened with welded mild steel angles of size 25mm x 25mm x3mm for boarding, laid over silver oak joists of size 10cmx13cm dia spaced at not more than 75 cm centre to centre or at suitable intervals etc complete in all floors complying with standard specification.

Centering for Square / Rectangular RCC Columns

Fly Ash Bricks work in Cement Mortar 1:5 (one cement and five m- sand) using best quality fly ash bricks of size 230 x 110 x 75mm for foundation and basement including curing, etc., complete complying with standard specification.

For foundation & basement

Above Ground floor

Flyash brick partition walls of 11.50cm thickness using best quality fly ash brick of size 230 x 110 x 75mm in cement mortar 1:3 (one cement and three M-sand) above basement including curing etc .complete and as directed by the departmental officers.

Plastering with cement mortar 1:3 (one cement and three P - sand), 10mm thick to RCC exposed faces in all floors with standard specification and as directed by the departmental officers.

Plastering with cement mortar 1:5 (one cement and five P-sand), 12mm thick in all floors including curing etc complete complying with standard specification and as directed by the departmental officers

Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three plastering sand), 20mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.

Painting two coats of ready mixed exterior emulsion paint first quality (Wheather coat / Wheather shield) and approved colour over a one priming coat to exisiting painted wall surface. Charges including through scrapping, clean removed of dirt, and including necessary plaster of paris putty, wherever required etc. complete complying with standard specification.

Supplying and laying of Interlocking Paver Block Stone 63mm thk. Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc.,(Including Rate of marerial)

Re-laying of Existing Removed Interlocking Paver Block Stone 63mm thk. Over a base layer of crushed stone sandfilling incl. Cost of M-sand, laying and Labour charges etc., (Excluding Rate of marerial)

Providing and fixing Dressed stone slab flamed finish 0.60mx0.60mx40mm with 50mm grass pointers in between for Pathway, charges included for cost of materials, and laying charges etc complete complying with standard specification and as directed by the departmental officers.

Supplying and filling of fine polished steel grey granite slab of size 1200mm X 600mm of 16mm - 18mm thick, Charges including for cutting, Cost of materials and Conveyance, charges etc. complete as per standard specification

Labour charges for grinding the granite slab edges into half round (single nosing)shape including cost of cutting blade and labour charges for grinding etc as per standard specification

Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 600mm x 100mm in Cement Concrete 1:2:4 (One cement, Two crushed stone sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Sand) to full depth of slab etc., complete complying with standard specification and as directed

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supplying and Fabrication including welding for structural frame works with 100x100x3.2mm MS Rectangle section for vertical post, 80x40x2.9mm MS Rectangle section for truss and Tie Beam, 50x50x2.9mm MS Square section for purlin and 5mm M.S Plates. The rate inclusive of cost and conveyance of priming coat painting with zinc chromate primer, material and labour etc, Complete complying with standard specification

SHS 100 x 100 x 3.2 mm

RHS 80 x 40 x 2.9 mm

SHS 50 x 50 x 2.9 mm

Stiffners

Supply and Fabrication including welding for structural frame works with 5mm M.S Plate. The Rate inclusive of cost and conveyance of priming coat painting with Zinc chromate primer, material and labour etc., Complete with standard specification

Base Plate

Foundation Bolts - 16mm Thick.

Supplying fabricating and placing in position of MS or RTS rods for all RCC works including cost of steel binding wire and labour charges for fabrication but excluding the cost of concrete and centering as per standard specification.

Supplying and fixing compound grill with M.S or RST Square rod as shown in the sketch made out of 25mm Square rod for vertical and horizontal support charges including for fabrication, one coat of red oxide over M.S grill and transporation etc complete as per standared specification

Roofing with best quality galvalume carrugated colour sheet of size 0.47mm over the MS tubular section truss including cost of self thread screws and cutting the sheets to required shapes if found necessary during execution etc .complete

Painting new iron works with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat etc complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Digging of the soil,all the debris,stone,weed roots orany other material shall be removed from the soil medium filing & spreading leveling of new soil mixture.Procuring with grass abtained from a healthy and properly maintained lawn free from weeds and other foreign materials and laying on the soil medium with garden soil mixture,Rate include for transportation, loading, unloading, levelling, fixing, Black soil & soil etc complete

Supplying and Dibbling/Planting different types of trees and plants. Rate include for transportation, loading, unloading, levelling, fixing, etc complete

Shade Plants (Under the Trees)

Border Plants (for pathway)

Monda gross plants

Plain Cement concrete 1:2:4 (One cement two M -Sand and four jelly) using 20mm HBS Jelly BSS guage for foundation and flooring as per standard specifications

Providing and constructing decorative Sign Boards as per drawing including masonry wall with wire cut bricks, 12mm thick acrylic sheets, 5mm thick aluminum sheets, provision for illumination, etc complete as directed by Engineer In Charge.

Providing and installing anti corrosive open top stainless steel waste bins of size 14" X 28" and 80 Litre capacity in round shape at designated locations as directed by Engineer In Charge.

Providing and Fixing Granite seating benches (5feet long) at suitable locations at pathway, OOTY boat house as directed by deparmental engineers

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator)

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point.

Supply and laying of following sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

3½ x 50 Sqmm PVC LTUG Cable

3½ x 25 Sqmm PVC LTUG Cable

Supply and frxing of brass cable gland for following sq.mm. PVC armoured LTUG cable with earth connection

3½ x 50 Sqmm PVC LTUG Cable

3½ x 25 Sqmm PVC LTUG Cable

Supply and providing cable end termination of following sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

3½ x 50 Sqmm PVC LTUG Cable

3½ x 25 Sqmm PVC LTUG Cable

Supply and laying of 3 core of 1.5 PVC flexible copper cable in suitable pVC rigid pipe on wall with suitable MS clamp including giving electrical connection etc., complete.

Supply and fixing of 8 inch PVC SMC box with lock & ket arrangement mounting on the existing pillar with necessary suitable brass screws suitable to acccomodate 16 Amps three phase neutral link fixed with suitable PVC Base for the neutral link including giving electrical connection etc., complete.

Supply, fabication, erection & commissioning of 125 Amps LV cubical panel made out of 14/16 SWG CRCA sheet steel enclosure, welded construction wall mounting type with grey powder coated suitable mounting in angle iron frame on wall with comprising of following arrangements etc., complete. Incoming Side: 1. 125 Amps FP HRC Fuse units - 3 Nos 2. Phase indication LED lamp - 3 Nos OutGoing Side: 1. 550mm x 40mm x 10mm - Aluminium Flat (4 Nos - For R,Y & B Phase & Neutral) 2. 63 Amps FP switch with HRC fuse - 2 Nos

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and Run of 1 of No.8 SWG copper wire for earth connection.

Supply and fixing of illuminated baollard 35W-45W,LED, 3000K suitable for on ground installation,It is made in combination of Steel pipe of 127mm dia. & decorative cast iron elements. After Fabrication, Entire bollard should be shot blasted for the effective adhesion of 3layer coating so as to avoid the corrosion.Decorative base with company name/logo engraved LED source is made of Silicon material-Much more flexible,Efficient heat dissipation,Perfect resealing with silicone glue. Mounting channel made of aluminium. Diffused Screen in Acrylic, LED-source Efficacy>90lm/W,SMD LED,yellow glue 3M,120 degree beam angle, Voltage DC 24V. It also includes Externl common Electronic Power Supply(Meanwell /Equivalent) ,which offers Protection against Short Circuit, Over- Voltage & Over- Current FInish- Pure Polyester Powder Coating in customised colour Metallaic Grey. IP Rating - IP 54. Height – 1000mm, Dia - 127mm including giving electruical connection etc., complete.

Supply and fixing of 18 Watts LED pendant light fitting including giving electrical connection etc., complete.

GST at 18%

SUBRAMANIAM R (BID ID -1201410)