SPECIAL REPAIRS TO LT DISTRIBUTION LINE AND ALLIED WORK IN C PARK UNDER GE PANAGARH

Amount

Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in hard/dense soil, complete all as specified and as directed.

Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25 cmin soft/loose soil, complete all as specified and as directed.

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point , complete all as specified and as directed.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying of cable, complete all as specified and as directed. (Note : Punned thickness shall be measured).

M&L for Fly Ash compact bricks locally available of size 23 x 11 x 7 cm laid dry width wise across the line of cable in trenches for protection of UG cable, complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 using 40mm graded stone aggregate as in foundation for stay set /Pole/ FPB etc including fair finish even and smooth to exposed surfaces without using extra cement, complete all as specified and as directed.

M&L for PCC (1:3:6) type C-1 (with using 20 mm graded stone aggregate) as coping of pole including necessary form work as required, complete all as specified and as directed.

M&L for 80 mm bore GI tubing, light grade, ISI marked for protection of cable including necessary joint, complete all as specified and as directed.

All as per item No.8 here-in-before but 40 mm dia.

Dismantling of existing steel poles/ struts of any size carefully for reuse including necessary excavation, demolition of concrete, transportation etc. and removing the old unserviceable rubbish etc , complete all as specified and as directed.

Dismantling of cross arms of MS channel or angle iron sections etc complete and setting aside, complete all as specified and as directed.

Dismantling of insulators of any type and any size, complete all as specified and as directed.

Dismantling of steel earth wire from existing overhead service feeder etc, complete all as specified and as directed.

Dismantling of ACSR conductor of any size from existing overhead service feeder etc , complete all as specified and as directed.

Dismantling/taking out carefully of old LT cable/ Service Wire incl bricks of any size, type or core and kept aside for reuse / rerouting / jointing / replacement etc , complete all as specified and as directed.

Fixing only cross arm of any size on existing or new poles complete after painting etc , complete all as specified and as directed. Note : Old servicieable Cross arm will be reused that is retrived from item no 11.

M&L for Aluminium conductor steel reinforced of any sizes , complete all as specified and as directed.

Re-stringing / Fixing only Aluminium conductor steel reinforced of any sizes , complete all as specified and as directed. Note: Old servicieable ACSR Conductor will be reused that is retrived from item no 14.

M&L for GI Wire as earth conductor 3.15/4 mm dia, complete all as specified and as directed.

M&L for cross arms, bracing, supports, clamps and back plate fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size inclusive of 2 coats of aluminium paint over a coat of red oxide primer , complete all as specified and as directed.

S&F Shackle type Insulator , porcelain vitreous, white, brown or green including galvanized mild steel straps , washers , insulator bolts and nuts for conductors working pressure 1100 volt of size 75 x 90 mm & GI straps section 31 x 3 mm , complete all as specified and as directed.

S&F Insulator pin type, porcelain vitreous, white, brown or green 100mm height and 65 mm dia including one galvanized mild steel spindle, two galvanized washers and one galvanized iron nut for conductor working pressure 1100 volt grade , complete all as specified and as directed.

M&L for Steel tubular swaged poles complete with cast iron/MS base plate , finial taper plug , bolts , nuts & screws as specified type 410 SP-31 , 9 meter long complete including PCC (1:3:6) type C2 (using 40 mm stone graded stone aggregate in foundation and copying with PCC (1:2:4) type B1 (using 20mm stone aggregate), complete all as specified & as directed. Note: PCC anti claiming device, cross arms insulator, ACSR conductor and earth work measure and paid separately)

S&F Loop type insulator, vitreous porcelain white ,brown or green large size over all dimension 65 X 90mm, clearance of the hole 16 mm for stay assembly , complete all as specified and as directed.

M&L for Galvanized stay strand,7/4mm , complete all as specified and as directed.

M&L for stay assembly with 16 mm dia stay rod complete with accessories as shown in electrical plate No 1 , complete all as specified and as directed. Note: Loop type insulator, stay clamps, excavation and concrete measured separately

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized iron strip of 32 mm x 6mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 40 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSr part 1 including testing on completion and demolition to existing one , complete all as specified and as directed..

Supply & fixing Street light fitting LED type capacity 45 W die-cast aluminium body, 45 watt LED 5700K, 4600 lm , lense type and toughened glass complete with 25/40 mm GI Bracket and connection with all accessories including taking down old unserviceable one, complete all as specified and as directed.

M&L for pole painting surfaces of any description steel, iron etc exc 10cm in width or girth after preparation of old surface of poles including pole fittings such as cross arms of any description, anti-climbing devices, nut, bolts etc. incl scrapping and rubbing etc and applying two coats of aluminum paint including numbering of poles , complete all as specified and as directed.

Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminiium conductor, 1100 volts grade cross sectional area 300 sqmm 3½ Core , complete all as specified and as directed. Note : Metal route indicator on every 30 meter to be fixed while returning filling with PCC and no extra payment will be made for this item.

All as per item No 30 here-in-before but 120 Sqmm 3½ Core.

All as per item No 30 here-in-before but 95 Sqmm 3½ Core

All as per item No 30 here-in-before but 70 Sqmm 3½ Core

All as per item No 30 here-in-before but 50 Sqmm 3½ Core

All as per item No 30 here-in-before but 25 Sqmm 4 Core

All as per item No 30 here-in-before but 16 Sqmm 4 Core

All as per item No 30 here-in-before but 10 Sqmm 2 Core

M&L for heat shrink type straight through jointing kit for 1.1 KV XLPE/PVC cables of size 6 to 16 Sqmm, 4 core including testing after jointing ,complete all as specified & as directed.

All as per item No 38 here-in-before but 25 to 50 Sqmm 4 Core

S&F LT line spacer for 2 wire system with minimum 25 cm spacing between conductors ,complete all as specified & as directed.

M&L for sheet metal enclosure for DBs 8 way double door Vertical TPN MCCB DB double door suitable for MCCB 4 pole 100A as incomer and SP and/or TP MCBs (up to 40A) as outgoing ,complete all as specified & as directed. Note : MCB and DB should be of same make

M&L for MCCB Four pole 100A, 16kA, 415V,50Hz ,complete all as specified & as directed.

M&L for MCB single pole 40 Amps 240 V 'C' series ,complete all as specified & as directed.

M&L for sub main wiring with two single core PVC insulated cable with Copper conductor unsheathed cable of size 4 sqmm drawn through & including PVC casing capping with 4 sqmm PVC insulated copper wire single core for continuous earthing after taking out old unserviceable ,complete all as specified & as directed. Note : Three run 4 Sq mm of cable shall be measured as single run.

M&L for drilling hole horizontally road under ( min 1 mtr) pavement hardstanding by treanchless technology using ultra sound technique and necessary machine suitable and including 150 mm dia HDPE pipe ,complete all as specified & as directed.

Felling of tree branches exc 30 cm girth including cutting of trunk, and branches and stacking of serviceable material and disposal of unserviceable material to a distance of exc 50 m and clearing site ,complete all as specified & as directed.

Schedule of Credit

M/S Ali Trading Co

SARASWATI ENTERPRISE (INDEX NO CEEC D-81)