Day to day maint of internal electrification, ceiling fan, exhaust fan and other connected items in Md and OTM Accn at Zone A Area of Mil Stn Gaya

Amount

Attending day to day complaints of internal electrification in Md and OTM Accn of Zone 'A' area of any type complete all as specified & directed. Note : (i) The items required for attending day to day complaints shall be measured and paid as supply and fixing under relevent items here-in-after. The contractor has to deploy sufficient skilled tradesman and making functional the complaint. (ii) The quoted rate deemed to include for all minor expenses required for making the complaint functional. (iii) The tradesman shall report to E/M complaint cell of GE Gaya daily at 8.30 am to take complaints from concern JE E/M. The complaint must be attended on same day in stuiplate time period by providing material required and by deploying sufficient manpower by the contractor. The complaint slip duly signed by the user shall be returned back at the complaint cell with proper feed back in the evening. (iv) The tradesman deployed for work shall wear proper uniform with full shirt and full pant with their names & contractors name on the uniform. Colour code of uniform will be decided by Engineer-in-Charge.

S & F in replacement of switch Piano Flush button single pole one way 5 Amp

S & F in replacement of switch socket combination 2-in-1, 3 Pin, 5 Amp flush type ISI Marked .

S & F in replacement of switch socket combination multipurpose 2-in-1, 5 and 15 Amp Flush type ISI Marked.

S & F in replacement of lamp hoder insulated body with back plate for batten fittings ISI marked.

S & F in replacement of ceiling rose , 3 phase / PVC/ polycarbonate, isolated body ISI marked.

S & F in replacement for socket outlet 3/5 pin 5 Amp flush type ISI marked.

S & F in replacement of socket type electronic fan regulator stepped type 100 watts ISI marked.

S & F in replacement of switch type electronic fan regulator stepped type 100 watts ISI marked

S & F in replacement of PVC 20 mm casing caping of 2 mtrs length ISI marked

S & F in replacement of 5/6 Amp 3 pin plug top ISI marked.

S & F in replacement of 15/16 Amp 3 pin plug top ISI marked.

S & F in replacement of bell ding dong/ bell musical single phase 230 volts ISI marked.

S & F in replacement of bell push piano flush type single pole one way 240 volts ISI marked.

S & F PVC box suitable for 15 Amp/5 Amp Socket Size 8x12 ISI marked.

S & F PVC box suitable for 15 Amp/05 Amp Socket Size 8x6 ISI marked.

S & F PVC box suitable for 15 Amp/05 Amp Socket Size 7x4 ISI marked.

S & F PVC box suitable for 15 Amp/05 Amp Socket Size 4x4 ISI marked.

S & F laminated hylum sheet cover 3mm thick suitable for Size 8x10

S & F laminated hylum sheet cover 3mm thick suitable for Size 8x12

S & F laminated hylum sheet cover 3mm thick suitable for Size 8x4

S & F in replacement flexible PVC conduit pipe 20/25 mm of length in 30 Mtr roll in white or dark grey colour.

S & F in replacement modular switch piano type 10 Amps one way single pole 240 volts ISI marked.

S & F in replacement modular switch piano type 20 Amps 240 volts ISI marked.

S & F in replacement modular socket outlet 10 Amps 5 pin 240 Volts multi socket for cell phone pin or 2 pin+ 3 pin

S & F in replacement modular socket outlet 20 Amps 6 pin 240 Volts twin socket heavy duty ISI marked.

S & F in replacement modular bell push large piano type single pole one way 240 volts ISI marked.

S & F in replacement modular type single phase motor stator 240 volt grade up to 25 Amps ISI marked.

S & F in replacement modular ceiling fan regulator suitable electronic rotary step type 100 Watt 1 module ISI marked.

S & F in replacement modular white cover plate with frame 1/2 module.

S & F in replacement modular white cover plate with frame 3 module

S & F in replacement modular white cover plate with frame 6 module

S & F in replacement modular white cover plate with frame 8 module

S & F in replacement modular metal flush box for 1/2 module

S & F in replacement modular metal flush box for 3 module

S & F in replacement modular metal flush box for 6/8 module

S & F in replacement MCB SP 5 to 30 Amps 240 volts ISI marked.

S & F in replacement MCB SPN capacity 40 to 63 Amps 240 volts ISI marked.

S & F in replacement sheet metal enclousure for MCB DB single pole and neutral 2 way without bus bar 240 volts single door type.

S & F in replacement sheet metal enclousure for MCB DB single pole and neutral 4 way with 200 Amps rated bus bar 240 volts double door type.

S & F in replacement sheet metal enclousure for MCB DB single pole and neutral 6 way with 200 Amps rated bus bar 240 volts double door type.

S & F in replacement sheet metal enclousure for MCB DB single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door type.

S & F in replacment of sheet metal enclosure MCCB DBs, Triple pole & neutral 4 way with 200 Amp rated bus bar double door suitable for 01 No incoming MCCB of 100 Amp capacity and 12 Nos out going MCB SPN complete all as specified and directed. Note: MCCB & MCB's are measured and paid in separate items and same make.

S & F in replacement MCCB 4 pole, 63 Amps with breaking capacity 16 KA, 415 volts complete.

S & F in replacement MCCB 4 pole, 100 Amps with breaking capacity 16 KA, 415 volts complete.

S & F Nails (Chinese) 1" (Type 17),1.5",2",2.5",3",

S & F Machine Screw 1"(30/7), 1.5"(35/8),3/4"

S & F PVC insulation tape of width 1.8 cm and 7 Mtrs length.

S & F in replacement stranded copper conductor cable FRLS PVC insulated of size 1.5 Sqmm single core in 90 mtr roll.

S & F in replacement stranded copper conductor cable FRLS PVC insulated of size 2.5 Sqmm single core in 90 mtr roll.

S & F in replacement stranded copper conductor cable FRLS PVC insulated of size 4.0 Sqmm single core in 90 mtr roll.

S & F in replacement stranded copper conductor cable FRLS PVC insulated of size 6.0 Sqmm single core in 90 mtr roll.

S & F in replacement stranded copper conductor cable FR PVC insulated 1.5 Sqmm 2 core, two colour coded circular shape as flex in 90 mtr roll

S & F in replacement stranded copper conductor cable FR PVC insulated 2.5 Sqmm 2 core, two colour coded circular shape as flex in 90 mtr roll

S & F in replacement twin core flexible wire 10/02 in 90 mtrs roll.

S & F in replacement LED ceiling light 36 watt LED (2x2 ft) warm white/cool day light, LED ceiling mounted merged square shaped slim width of the tile makes it seamlessly blend in with the ceiling space with geometric and aligned designed, the tile cane be arranged in symmetric and abstract way to make the ceiling a peice of art as complete fitting, including LED panel in white, 230 volt energy saving, enviromental friendly, long life, corrosion resistant, impact proof, IP-65luminaire with PC Housing in merged octagon shaped suitable for wet location, ceiling complete with all accessories internally prewired and including connected with twin core twisted flexible wire copper conductor cable with suitable size complete all as specified and directed. Make :Crompton Greaves,/Havells/Bajaj/HPL

S & F in replacement LED Recessed 18 watt warm white/cool day light, round/square shaped full light luminaire with glare free uniform illumination with longer life and less maintenance ceiling light fitting complete, including LED recessd, 230 volt energy saving, enviromental friendly, long life, corrosion resistant, impact proof, IP-65 l100 luminaire/watt with PC Housing in opal finish suitable for wet location with britness LED edge lit luminaire suitable for armstrong/grid ceiling complete with all accessories internally prewired and including connected with twin core twisted flexible wire copper conductor cable with suitable size complete all as specified and directed. Make: Crompton Greaves or equivalent in Havells/Bajaj

S & F in replacement for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make : Crompton Greaves/ Philips/ Havells

S & F in replacement LED tube light 10 watt 2' with LED batten with aluminium housing & integrated electronic driver. Make: Havells/Phillips/Syska/Crompton

Labour only for fixing wall mounted LED tube light fitting 10/18/20 watts batten for surface mounted to ceiling rose in replacement complete all as specified and as directed. Note: Fitting shall be supplied for fixing only under Schedule 'B'

S & F in replacement bulkhead luminaires in die cast aluminum and frosted glass suitable for upto 15 W retrofit LED bulb including LED bulb 15 Watt and connecting upto ceiling rose with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and laying in replacement of service wire 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with tape and overall PVC sheathed 10 Sqmm two core nominal cross section complete all as specified and directed.

Supply and laying in replacement of service wire 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with tape and overall PVC sheathed 16 Sqmm two core nominal cross section complete all as specified and directed.

Taking down existing ceiling fan 1200/1400mm sweep carefully from any differnt location and servicing the same by cleaning, greasing, oiling, replacing the unserviceable minor spare parts etc if, any and kept safely for refixing the same after reassembling complete all as specified and directed. Note: Necessary T&P such as ladder, helper etc shall be arranged by the contractor. (Repairs & spares shall be measured and paid separately under respective item of sch 'A' as supply only)

Taking down existing exhaust fan 300/350 mm sweep metal body heavy duty including 350/400mm louver shutter and servicing the same by cleaning, greasing, oiling, replacing the unserviceable minor spare parts etc if, any and refixing the same after reassembling ixing in the same position complete all as directed. Note: Necessary T&P such as ladder, helper etc shall be arranged by the contractor. (Repairs & spares shall be measured and paid separately under respective item of sch 'A' as supply only)

Supply only ball bearing No 6202/6203/6204 or as per site requirement suitable for ceiling fan 1200/1400mm sweep Make : NBC /SKF (bearing with 8 balls shall only be used)

Supply only gun metal bush as approved suitable for ceiling fan 1200/1400mm sweep.

Supply only capacitor AC 220/230 volts 2.5 mfd Make : Asian /Tyton/ Crompton Greaves/ Usha/Epcos.

Supply only capacitor AC 220/230 volts 3.5 mfd Make : Asian /Tyton/ Crompton Greaves/ Usha/Epcos.

Supply only rubber reel of fan with MS split clamp, two Nos nuts, bolts and washer complete set of appropriate size for hanging of ceiling fan complete.

Supply only upper & lower canopy (set of two) made of good quality PVC with tightening screws of required size for any make of ceiling fan complete.

M & L for winding of motor of 1200/1400 mm sweep ceiling fan of any make with super enameled copper winding wire of existing gauge (Approx wt of copper winding wire per fan 350 to 500 gms) including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with twin core copper flexible wire of size 0.5 Sqmm of length not more than one meter with each fan including white synthetic enamel spray painting of fan and blade after rewinding complete all as specified and directed. Make of winding wire : New India/ Jindal/ Devidyal/ HTP

M & L for winding of motor of 300/3500 mm sweep exhaust fan of any make with super enameled copper winding wire of existing gauge (Approx wt of copper winding wire per fan 350 to 500 gms) including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with twin core copper flexible wire of size 0.5 Sqmm of length not more than one meter with each fan including gray synthetic enamel spray painting of exhaust fan, blade and frame after rewinding complete all as specified and directed. Make of winding wire : New India/ Jindal/ Devidyal/ HTP. Notes for item No. 72 & 73 : (i) Old burnt wire shall be contractor’s property and necessary credit shall be recovered as per credit schedule. (ii) Contractor will mark the CA No with repair/ rewinding date on the fan before handing over to the department. (iii) Any fan repair/rewinding by contractor and found defective within waranty period i.e one year from the date of repair/rewinding the contractor will repair/ rewinding the same without any extra cost. (iv) Contractor will return the fan after rewinding and testing within 7 days from the date of taken over, if not a panelty @ rate of Rs 50/ fan per day will be charged.

S & F in replacement of plastic body exhaust fan 200 mm sweep, energy saving fans, 230 V, 50 Hz complete. Make: Khaitan/Havells/Usha Note: Old UNSV exhaust fan shall be deposited to MES store yard

S & F in replacement of ceiling fan 1200mm sweep, energy saving fans, 230 V, 50Hz complete. Make: Khaitan/Havells/ Usha Note: Old UNSV ceiling fan shall be deposited to MES store yard

S & F in replacement of wall mounted fan 400mm sweep, energy saving fans, 230 V, 50 Hz complete. Make: Crompton/ Havells/ Usha Note: Old UNSV wall fan shall be deposited to MES store yard

S & F in replacement of steel body exhaust fan 300 mm sweep, energy saving fans, 230 V, 50Hz complete. Make: Khaitan/ Havells/Usha Note: Old UNSV exhaust fan shall be deposited to MES store yard

S & F in replacement of steel body exhaust fan 450 mm sweep, 1400 RPM energy saving fans, 230 V, 50Hz complete. Make: Khaitan/ Havells/Usha Note: Old UNSV exhaust fan shall be deposited to MES store yard

MAA BHAGWATI TELECOM LINK

M/S PANCHAM RAI SONS

M/S ASHOK KUMAR

BEHL ENGINEERS AND TRADERS