Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.2 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹34.9 L+₹3.5 L (11.1%)Rejected-AOC | L2 | Rejected-AOC Other than L1 | |
| 3 | L3₹37.5 L+₹6.0 L (19.2%)Rejected-AOC 4 KRISHNANJALI BUILDING TAI PINGALE CHOWK DOMBIVALI EAST | DOMBIVALI | THANE | MAHARASHTRA | 421201 | L3 | Rejected-AOC Other than L1 | |
| 4 | L4₹37.6 L+₹6.1 L (19.5%)Rejected-AOC | L4 | Rejected-AOC Other than L1 | |
| 5 | L5₹38.1 L+₹6.7 L (21.2%)Rejected-AOC B 68 MOTIKUNJ MATHURA 281001 UP | MATHURA | UTTAR PRADESH | 281001 | L5 | Rejected-AOC Other than L1 |
Tender Value
₹42.4 L
EMD Value
₹84,700
Closing Date
28 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Mathews M Shepherd
Mathura
PROVN OF CERTAIN SANCTIONED WORK UNDER GE (W) MATHURA
2023_MES_600354_1
8300/1155/E8
Open Tender
Civil Works
Item Rate
180 days
GE (WEST) Mathura
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (West) Mathura
₹84,700
Yes
25 Aug 2023
2 Jun 2023
29 Jun 2023
2 Jun 2023
28 Jun 2023
16 Jun 2023
Amount
Taking down chowkhats with shutter (without taking off shutters from the frame) area exc. 1.50 Sqm but n.exc 4.00 sqm each complete all as specified and directed.
Taking down chowkhats with shutter (without taking off shutters from the frame) area not exc. 1.50 Sqm each complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc complete all as specified and directed.
Demolition of Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. complete all as specified and as directed.
Taking up or down steel tubing and connections of 15 mm bore pipe complete all as specified and as directed.
Taking up or down steel tubing and connections of 20 mm bore pipe complete all as specified and as directed.
M&L for Brick work with sub class ‘B’ old size burnt bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-charge.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.
M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished surface fair and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in CM (1:4) on other than fair faces of brick or concrete surfaces, finished surface even & fair without using extra cement for height upto G+2 Bldg complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work/internal faces in man holes in CM (1:4) mixed with liquid water proofing compound @ 200ml by weight of cement per 50 Kg including finishing the surface even and smooth without using extra cement complete all as specified and directed. Note :Supply of WPC shall be measured and paid separately.
M&L rendering 15mm thick in CM (1:4) on external surface of manholes surfaces finished fair and even without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick in CM (1:4) as on ceiling complete all as specified and directed.
Supply only Liquid water proofing compound of approved complete all as specified and directed.
M&L for preparartion of new plastered surfaces of walls and applying two coats cement base paint on walls complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening prepartory to distemper complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of chalk whitening and a coat of wall putty to achieve smooth finish complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for complete removal of existing treatment and preparation of old surface of walls and applying two coat of distemper oil emulsion distemper on wall incl applying a coat of wall care putty to achieve smooth finish to wall etc complete all as specified and directed.
M&L for complete removal of existing treatment and preparartion of old surfaces of walls and applying two coats of cement based paint over a coat of cement primer on walls etc complete all as specified and as directed.
M&L for preparation of old treated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old treated surfaces of walls including cornices pillars etc and applying two coat of white wash on walls complete all as specified and directed.
M&L for 15 mm nominal bore Mild steel galvanised water tubing, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
M&L for 20 mm nominal bore Mild steel galvanised water tubing, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
M&L for salt glazed stone ware drain pipe 150mm grade 'A' laid in trenches and jointed in CM (1:1) complete all as specified and directed.
M&L for salt glazed stone ware drain pipe 200mm grade 'A' laid in trenches and jointed in CM (1:1) complete all as specified and directed.
M&L for concrete bed to drain pipes 150mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate complete all as specified and directed.
M&L for concrete bed to drain pipes 200mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate complete all as specified and directed.
S&F 100mm bore cast iron sand cast soil, waste and vent pipe in any length with or without ears fixed with cement joints, laid in trenches or in floor including taking down old unserviceable CI pipe and fittings complete all as specified & directed by Engineer-in-charge. Note :- Cost of Excavation & earthwork, if required is deemed to included to in the unit rate of this items nothing extra shall be paid on this account.
S&F 100mm CI pipes soil, waste and vent pipe in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes including taking down old unserviceable CI pipe and fittings complete all as specified and directed.
S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed by Engineer-in-charge.
S&F 100mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified & directed.
M&L for bands, straps, supports or stays for rainwater , Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and lintle hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
S&F 75mm bore cast iron sand cast soil, waste and vent pipe in any length with or without ears fixed with cement joints, laid in trenches or in floor including taking down old unserviceable CI pipe and fittings complete all as specified & directed by Engineer-in-charge. Note :- Cost of Excavation & earthwork, if required is deemed to included to in the unit rate of this items nothing extra shall be paid on this account.
S&F 75mm CI pipes soil, waste and vent pipe in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes including taking down old unserviceable CI pipe and fittings complete all as specified and directed.
S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed by Engineer-in-charge.
S&F 75mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified & directed.
S&F in repair 15mm bore chromium plated bib tap cast copper alloy fancy type (min weight 400 gm) screwed down, screwed for iron pipe or for brass ferrule and fix complete all as specified and directed.
S&F in repairs Counter oval type wash basin white colour of size 520 x 440 x 180mm including 32 mm dia PTMT waste coupling wastage chain with plug and procelain stopper complete all as specified and directed by Engineer-in-Charge.
S&F in repairs PVC connection pipe 15mm size with nuts, washers of length 450mm pipe complete all as specified and directed.
S&F in repair 15mm bore CP pillar taps Fancy type cast copper alloy (min wt 350gm) along screwed down high pressure with lettered hot & cold with long screwed shanks and fly nuts screwed for GI pipe complete all as specified and directed.
S&F in repair CP angle / stop cock fancy type chromium plated 15 mm bore (min wt 350gm) screwed down, high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair Stainless steel gratings 100mm bore size fixed with white cement, complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling water tank of 750 Ltr capacity complete all as specified and directed.
S&F in repair float valve of 20 mm dia ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.
S&F 20mm GI nipple suitable for HDPE water tank complete all as specified and directed.
Dismantling loose/disintegrated portion of RCC Chajjas, bands, shelves, beams, coloumn or slab and similar work including support if required and stitching of cracks with MS U clamps of 8mm dia @ 150mm c/c with inserting concrate block strecthner with cement mortar (1:3) mixed with adhesive chemical (polymer based) and reinforced with PVC chicken mash formwork including where ever required and finished with 10mm thick plastering in CM (1:4) finished even & smooth without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.
M&L for applying a coat of two component elastomeric acrylic polymer modified cementitious water proofing coating, having properties of 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and sprinkle sand at 10-15 gram per sqft for better grip with plaster complete all as specified and directed.
S&F 18mm thick Alstone wood polymer Composive board (WPC) in cupboard shutter with decorative on both side design fixed by drilling screws complete all as specified and as directed.
S&F continous piano hinges mild steel bright finish or electrogalvanised of 30mm width complete all as specified and directed.
S&F magnetic catcher of ABS plastic for cupboards etc complete all as specified and directed.
S&F Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed.
M&L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and as directed.
S&F 35mm thick plain framed panelled door shutter, factory made (any number of panels) of 2nd class hard wood with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces including 2nd class hard wood kail beading 20mm wide tapering from 10mm to 5 mm on one side of shutter & fitted to chowkhats. The size of rail and style shall be as per IS –1003 (Part-I) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed.
S&F 100mm long stainless steel Butt hinges fixed complete all as specified and directed.
S&F 150mm stainless steel barrel tower bolts with bright bolt and fixed complete all as specified and directed.
S&F 150mm long stainless steel handles, oval type complete all as specified and directed.
S&F 300mm stainless steel sliding door bolts, bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F factory made steel windows with side hung shutters including box type hinges with steel handle & steel peg stay complete without glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and directed.
S&F factory made steel windows with side hung shutters including box type hinges with steel handle & steel peg stay complete with glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and directed.
S&F mild steel framed work as grills, gratings etc with end of bars shouldred and / or rivited or forged into spikes, framed guard bar barred iron door ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed.
S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F steel work in tubular trusses including columns, special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1998 grade St-240 complete all as specified and directed.
M&L for applying two coats of synthetic enameled paint over a coat of red oxide primer on new steel surfaces exc. 10 cm girth and width including preparation of new steel surfaces complete all as specified and directed.
M&L for preparation of steel surface already treated with primer over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
M&L for PCC (1:3:6) type B-1 using 20mm graded stone aggregate as in bed plates of vertical steel posts etc and similar works including necessary form work complete all as specified and directed.
M&L for 75mm thick cement concrete type C-2, (1:3:6) using 20mm graded stone aggregate as plinth protection and finished surface even and smooth without using extra cement complete all as specified and directed.
M&L for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 3 mm thick sheet glass,ordinary quality and glazing with oil putty in squares not exceeding 0.50 sq.m. in each shape complete all as specified and directed.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth, for foundation etc. or for shafts, wells, cesspits, manholes, pierholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out Soft or loose soil complete all as specified and directed.
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soil complete all as specified and directed.
Removing excavated soil n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and directed.
M&L for providing cement concrete type D-2, (1:4:8) using 40mm graded aggregate as in foundation filling, sub base and mass concrete complete all as specified and directed.
M&L for providing precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar (1:4) complete all as specified and directed.
M&L 75 mm thick Cement concrete type D-2, (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed.
M&L for sand filling under floors or in foundation complete all as specified and directed.
M&L for Machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.
S&F stainless steel kitchen plate rack overall size 900mmX900mm made out of 0.8 mm thick stainless steel sheet etc complete all as specified and directed.
S&F in repair stainless steel kitchen sink 1 mm thick kitchen / laboratories with plug washer and waste including bedding in cement mortar and fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm, complete all as specified and directed.
S&F in repair low density poly ethylene pipes (LDPE) of 32mm bore fixed complete to urinal pots all as specified.
M&L for cutting chases, pining in making good to facing where required and pointed in CM (1:3) to ends or edges of landing , steps cills, sun shade, shelves etc and cutting chases for concealed conduit wiring etc and making good , match with existing surfaces by applying white/colour wash cutting not exc 10cm girth complete all as specified and directed.
M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section ( not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm including providing and fixing designer decorative Gypsum board 4mm thick complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) (1:1½:3) type A1 using 20mm graded stone aggregate as in foundations, including rafts, footings, foundations beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) (1:1½:3) type A1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors roofs landings canopies deck slab and in snelves and the like complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) (1:1½:3) type A1 using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) (1:1½:3) type A1 using 20mm graded stone aggregate as in chajjas etc complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) (1:1½:3) type A1 using 20mm graded stone aggregate as in beams, cantilevers, bressumers, lintels over 1.5 m span complete all as specified.
Formwork to sides of concrete foundations footings bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished of flat surface complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished of flat surface complete all as specified and directed.
Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.
Formwork to sides of pillers, posts, struts, piers, columns and stanchions of square , rectangular or polygonal for rough finished surface of concrete complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc. for rough finished surface of concrete complete all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for TMT MS bars of 5mm dia and upto 10mm dia as in stirrups and spacers cut to lengh bent to shape reqd incl cranking bending spirally for hooking for column and binding with MS annealed wire not less than 0.9mm dia complete all as specified and directed.
M&L for water proofing treatment with APP modified bituminous membrane 3mm thick consisting of the following for RCC roof :- (a) Cleaning palstered roof surfaces and applying a coat of oxidised bitumen based solvented primer a@ 0.3Kg /Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed. (b) M&L for APP modified polymeric water proofing membrance 3mm thick weight not less than 3.0 Kg/Sqm with non woven polyster core of approved make applied by heating one surface of membrane with LPG torch with lap of 100mm and the overlap shall be sealed by flame complete all as specified and directed.
M&L for 75 mm thick Cement concrete type D-2, (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed.
M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate ) as in floor finishes and leveling course complete all as specified and directed.
M&L for Plain cement concrete type B1 (1:2:4), using 20 mm graded crushed stone aggregate,40 mm thick , as in floor and finished even and smooth using extra cement laid in alternate bay and joints filled with and including bituminous compound grade 'A' complete all as specified and directed.
M&L for Non skid coloured ceramic tiles 7 to 8 mm thick exceeding 0.11 sqm but not exceeding 0.18 sqm (Square/rectangular) in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
M&L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.
M&L glazed ceramic tile in vertical surface 450x300x7 mm thick etc set and jointed in neat cement slurry and pointed in white or colored cement on vertical surface over 10mm thick plaster in CM (1:3) complete all as specified and directed.
M&L for pre-polished chequered tiles (any colour) of size 30cm x 30cm x 25mm thick, with gray cement & pigment set, jointed and pointed in neat cement slurry in floors laid over and including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed.
M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with pigment to match the shade of the slab including rubbing and polishing including screed bed and bedding layer of mortar 20 mm thick in CM (1:4) for laying floor finishes size complete all as specified and directed.
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 20mm screed bedding in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed.
S&F powder coated aluminium anodised door frame and shutter of section as under and providing 5.50mm thick tinted gass with and including each shutter to be provided with aluminium fittings such as aluminum butt hinges 100mm- 03 Nos, Aluminum handles 150mm- 02 Nos, Aluminium tower bolts 150mm- 02 Nos, rubber neopran beadding, glazing clips and one lock four lever with duplicate keys of make Godrej or equivalent in each opening and 01 No hydraluic door spring etc complete all as specified and directed:- (a) Outer Frame - 100x50x1.20mm (b) Shutter - 90x50x1.20mm (c) Top, middle & Bottom rail 90x50x1.20mm etc
S&F powder coated aluminium window using 63mmx38mmx1.6mm chowkhats with 48mmx48mmx1.6mm openable section as in shutter including 5.5mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100mm-02 Nos, tower bolts 100mm-02Nos, hooks and eye-02 Nos 150mm, butt hinges 100mm 04 Nos etc complete all as specified and directed.
S&F powder coated aluminium window using 63mm x 38mm x 1.6mm chowkhats with 48mmx48mmx1.6mm openable section as in shutter including ornamental aluminium grill with 0.36 mm nominal dia of wire and width of aperture 1.18 mm of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100mm-02 Nos, tower bolts 100mm-02Nos, hooks and eye-02 Nos 150mm, butt hinges 100mm 04 Nos etc complete all as specified and directed.
M&L hard core of guage not exc. 63mm deposited spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.
M&L for Construction of soakage wells of size 2.4M dia x 3.0M deep including excavation in any type of soil complete all as specified and shown on drawings. Note :- (i) Effective depth should be measured from inlet of pipe. (ii) HQ CEJZ Drawing No TD/2004/S-35 Sheet 1/1.)
M&L for construction of septic tanks for 100 users, excavation, in ordinary soil, complete all as specified and as shown in drawings. Note :-HQ CEJZ Drawing No TD/2002/S-2 Sheet 1/1)
Taking down surface / concealed copper / aluminium point wiring (light, bell, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, lamp holders, pendants, sockets, regulators, tubelight fittings, bulb, etc and making good disturbed surfaces with plaster on walls, floors etc complete all as specified and directed.
M&L for Point wiring complete with 2.5 sqmm single core FRLSH PVC insulated cable with multi stranded copper condutor in and including PVC conduit 20mm dia and thickness not less than 1.5mm, ISI marked with all accessories for surface or concealed conduit as directed at site incl chase cutting for one light/fan point controlled by one one way switch including MS sheet sunken box concealed on wall duly painted inside and outside with one coat of red oxide primer and two coats of black bituminous paint with 3mm thick hylum brand bakelite sheet cover for fixing switches, sockets, regulators etc. alongwith 2.5 sqmm multi stranded FRLSH, PVC insulaedcopper cable as continuous earth connected to common earth and earth dolly including making good the disturbed surfaces complete all as specified and as directed.
All as per serial item No. 117.00 here-in-before but for One 5 pin 5 Amp socket outlet on independent board.
All as per serial item No. 117.00 here-in-before but for One 5 pin 5 Amp socket outlet on the same board with other switches.
M&L for point wiring with 2.5 sqmm PVC insulated, unsheathed FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.2mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick hylam sheet cover for mounting switches, socket etc including 2.5 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire complete for one socket 16 Amp socket outlet controlled by one switch on independent board.complete all as specified and directed.
S&F socket outlet flush type 3/6 pin suitable for 15 Amp plug top Multipurpose 230 volts all as specified & directed.
S&F socket outlet flush type 5 pin suitable for 5 Amp 230 Volts all as specified and directed.
S&F switch Piano flush type 5 amp single pole one way 230 volts all as specified & directed.
S&F switch Piano flush type 15 amp single pole one way 230 volts all as specified & directed.
S&F ceiling rose of 65x50mm PVC/polycarbonate three terminal surface bakelite complete all as specifiend and directed.
S&F lamp holder insulated body with back plate batten/angle type for batten fittings complete all as specified and directed.
S&F LED bulb base B22 of capacity 10 watts not less than 700 lumens output at 6500K colour temp, complete all as specified and directed.
S&F 10W integrated LED bulk head luminaire environment friendly, ultra modern, energy saving, surface mounted decorative oval bulk head with LED light, complete all as specified and directed.
S&F surface and wall mounted 10 watt LED batten, PVC housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.
S&F surface and wall mounted 20 watt LED batten, PVC housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.
S&F 5 step electronic fan regulator switch type 230 Volts complete all as specified and directed.
S&F ceiling fans (5 Star rated by Bureau of energy with service value of not less than 8.40) BLDC, (26W±10%) with or without remote, with rated speed 350 Rev per min, air delivery 220 Cum/min complete with blades, down rods, electronic regulator and accessories, 230 volt, 1200 mm sweep, suitable for single phase supply all as specified and directed
S&F Exhaust fan metallic body of size 300 mm sweep, 50 Hz, AC 240Volt, 900 RPM, dynamically balanced impellers for smooth & vibration free operation, pre-lubricated double ball bearing for maintenance free running with aerodynamically designed & balanced blade, air delivery 1275 Cum/hr, noise level 40dB- 45dB and power consumption (50 W±10%) heavy duty single phase supply including mild steel louvers all as specified and directed.
S&F wall mounted fan, PVC body AC single phase, 230 Volts of size 400mm sweep with blades and frame complete all as specified and directed.
M&L for Sub main wiring with 2 runs of 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable drawn through and including PVC conduit ISI marked 25 mm dia with conduit accessories fixed on wall/roof and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable as earth conductor including taking down old unserviceable submain wiring complete all as specified and directed. Note : Two runs of 6 Sqmm cable, one run of 6 Sqmm earth conductor and one run of PVC conduit of 25mm dia shall be measured and paid as one unit length.
S&F in repairs MCB SP 240 volts, 06-32 Amps 10KA, 'C' Series complete all as specified and directed.
S&F in repairs MCB SPN 240 volts, 32 Amps, 10KA, 'C' Series complete all as specified and directed.
S&F in repairs MCB 4 Pole, 100 Amps, 10KA, 'C' Series complete all as specified and directed.
S&F in repair sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with minimum 200 Amp capacity bus bar size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
S&F in repair factory made sheet metal enclosers distributed board double door three phase 415 volts 8 way for MCCB 160 Amp, 4P as incoming and MCB (TP/SP) as outgoing comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed. Note : (i) The DB shall be VTPN specified makes listed in Appendix 'B'. (ii) The DB Shall be flush fixed and making good the distrubed surface matching with existing specification shall be part of job at no extra cost. (iii) Connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin / bottle type thimble-properly crimped. (iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size.
S&F in repair sheet metal enclosure MCB distribution board triple pole & neutral 415 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
S&F in repairs MCCB, 160 Amp, 4 Pole, 16 KA, adjustable thermal & fixed magnetic setting complete all as specified and as directed.
S&F in repair MCB SPN 240 volts, 40-63 Amps, 10KA, 'C' Curve complete all as specified and directed.
S&F in replacement Security Light of 30 watts of New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic cover and accessories including brakcet, nut bolt etc complete all as specified and directed.
Supply & laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with ''XLPE'' insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 16 Sqmm x 4 core size including taking down old unserviceable cable complete all as specified. Note: Earth work and other connected work shall be measured & paid sperately.
M&L for sand cushioning and covering clean and dry sand to underground electric cable in trenches / floor complete all as specified and directed. Note :- Punned thickness shall be measured and paid for.
M&L for bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt, connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI pipe 20mm light grade for water filling including 15x20mm reducer socket funnel wire mesh, RCC cover with concrete 1:2:4 using 8 mm# bar@100 mm c/c both ways ,PCC chamber pit with PCC (1:3:6) type C-2 and excavation and earth work,disposal of suplus spoil to a dstance not exceeding 50mtrs all as specified and shown on electrical plate No. 3 of 2009 (Part-I) including taking down old unserviceable earthing complete all as specified. Note :- The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level.
Karman Infra Projects
subhash construction co
BHARDWAJ CONSTRUCTIONS
M/s Hoti Lal Contractor
R N AGRAWAL
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .