REPAIRS TO WOODEN AND STEEL FURNITURE INCLUDING BED HARD CHARPOY IP HARD TOP AT KAVARATTI ANDROTH AND MINICOY UNDER GE NAVY LAKSHADWEEP

Amount

Repairs To Sofa Set 1/4/5 seater FD-281/258/373 : Removing of worn out upholstery & U Foam and S & F new U- foam cushion (ISI Marked) 40 Density of size as per Drg including long cloth lining inside and new tapestry cloth cover as per sample of approved shade duly stitched and provided with nylon zip complete all as shown on drg and as directed. Note :- (i) Each cushion with tapestry cover shall be measured and paid as one unit. (ii) The cost of tapestry shall not be less than Rs 550/- per mtr.

Removing the existing broken/damaged arms of sofa and S&F new arms of existing size and shape, made out of well seasoned first class teak wood, including polishing to glossy finish,etc complete all as shown on drg and as directed. Note :- (i) Each arm will be measured and paid as one unit. (ii)Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted.

Removing the existing broken/damaged legs of sofa and S&F new legs of existing size and shape, made out of well seasoned first class teak wood, including polishing to glossy finish,etc complete all as shown on drg and as directed. Note :- (i) Each leg will be measured and paid as one unit. (ii)Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted.

Removing the existing broken/damaged front and rear rails of single seater sofa and S&F new long rails of single seater sofa of existing size and shape, made out of well seasoned first class teak wood, including polishing to glossy finish,etc complete all as shown on drg and as directed. Note :-(i) Each rail will be measured and paid as one unit. (ii)Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted.

Removing the existing broken/damaged battens and S&F new battens of sofa of existing size and shape, made out of well seasoned first class teak wood, including polishing to glossy finish,etc complete all as shown on drg and as directed. Note :- (i) Each batten will be measured and paid as one unit. (ii)Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted.

Preparing the existing surface of wooden furniture of any description by applying sand paper, removing the stains and filling the bore holes, cracks by putting bees wax and chalk powder etc, and apply french polish to the exposed surface and shall be uniform and glossy finish for sofa set FD-281 complete all as shown on drg and as directed.

Removing of worn out tapestry cloth and supply of new tapestry cloth cover as per sample of approved shade for cushions of 40 D size as per existing pattern duly stitched along with zip facility complete all as shown on drg and as directed. . Note :- The cost of tapestry shall not be less than Rs 550/- per mtr.

Chair easy (FD-17(M)/201/229),Chair writing (FD-20(M)/202 /250/280) : Removing of old unserviceable plastic cane and recanning with approved quality cane plastic 2mm/3mm/4mm all as shown on drg including tightning the loose chairs ( seat & back) and french polishing to the structures of chair complete all as specified and as directed .

Repairs to Chair Writing:-FD-280 : Removing the existing broken / damaged back leg and S&F well seasoned first class teak wood back leg duly polished complete all as shown on drg and as directed.

All as per item No.16 above but front leg .

Removing the existing broken / damaged side rails of seat frame and S&F well seasoned first class teak wood side rail duly polished including provision of caning holes 12.5mm centre to centre complete all as shown on drg and as directed.

All as per item No. 11.00 above but front rail of seat frame.

All as per item No. 11.00 above but rear rail of seat frame.

Removing the existing broken / damaged arm rest and S&F well seasoned first class teak wood arm rest duly polished complete all as shown on drg and as directed.

Removing the existing broken / damaged rest stiffener and S&F new sesaned teak wood stiffener duly polished complete all as shown on drg and as directed.

Removing the existing broken / damaged bottom stiffener and S&F new sesaned teak wood stiffener duly polished and all as shown on drg and as directed.

Repairs to Chair Easy:-FD-229 : Removing the existing broken / damaged front legs and S&F well seasoned first class teak wood leg duly polished complete all as shown on drg and as directed.

All as per item No. 17 above but back leg

Removing the existing broken / damaged side rails of seat frame and S&F well seasoned first class teak wood side rail duly polished including provision of caning holes 12.5mm centre to centre complete all as shown on drg and as directed.

All as per item No. 19.00 above but front rail of seat frame.

All as per item No.19.00 above but back rail of seat frame.

Removing the existing broken / damaged top of horizontal rail of the back rest frame and S&F well seasoned first class teak wood rail duly polished complete all as shown on drg and as directed.

All as per item No. 22.00 above but bottom horizontal rail of back rest frame.

All as per item No. 22.00 above but side rail of back rest frame.

Removing the existing broken / damaged arm rest and S&F well seasoned first class teak wood arm rest duly polished complete all as shown on drg and as directed.

Chair Easy Cushioned FD 358 : Repair to chair and Removing the unserviceable worn out cloth tapestry and cushion from chair back and seat and S&F new seat and back cushion 75mm thck for seat and 50mm thick for back fixed over existing frame with 3mm thick commercial ply wood duly covered with frame / cushion with best quality leatherised rexene of approved colour and fixed seat & back of the chair easy with screws complete all as shown on drg and as directed. Note :- (i) Each chair (seat and back) with tapestry cloth measured as single unit for the purpose of payment. (ii) Two coats of synthetic glossy polish on teak wood surfaces of chair easy cushioned is included in rate quoted.

Repairs to Table Dining FD- 376/373 Removing the existing unserviceable damaged top and S&F new top with prelaminated particle board 18mm thick ( ISI marked) with 4mm thick teak wood edging all round including tightining of the frame complete all as shown on drg and as directed.

Removing the existing broken / damaged leg from table dinning and S&F new leg of existing size made to shape from well seasoned first class teak wood duly polished complete all as shown on drg and as directed.

Removing the existing broken / damaged long rail from table dinning and S&F new long rail of existing size made to shape from well seasoned first class teak wood duly polished complete all as shown on drg and as directed.

All as per Item No 29.00 above but short rail

Removing the existing broken / damaged wooden corner bracket from table dinning 8 persons and S&F new bracket of existing size made to shape from well seasoned first class teak wood duly polished complete all as shown on drg and as directed.

Repairs to Table Bedside (MAP)(FD/E6/MAP/15(R) Removing the existing unserviceable damaged sides and S&F new sides made out of 18mm thick prelaminated particle board and providing new members including french polish complete all as shown on drg and as directed.

All as per item No.32.00 here in before but back made out of 12 mm thick commercial plywood.

All as per item No.32.00 here in before but top / shelves made out of 12mm thick prelaminated particle board.

Removing unserviceable knob and replacing with new knob complete all as shown on drg and as directed

Repairs to Peg table FD-384 Removing the existing unserviceable top from peg table and S&F new top of prelaminated particle board 18mm ISI mark with PVC edge banding sealing type ( teak wood colour) all round including tightning of the frame complete all as shown on drg and as directed.

Removing the existing broken / damaged legs from peg table and S&F new legs of existing size made to shape from well seasoned first class teak wood duly polished complete all as shown on drg and as directed.

Removing the existing broken / damaged long rail from peg table and S&F new long rail of existing size made to shape from well seasoned first class teak wood duly polished complete all as shown on drg and as directed.

All as per Item No 38.00 above but short rail

Repairs toTable 900X600x760mm with Drawer FD-283/284 Removing the existing unserviceable table top and S&F new table top of prelaminated particle board 18mm (ISI mark) with 4mm thick teak wood edging all round complete all as shown on drg and as directed.

Removing the existing broken / damaged leg from table and S&F new leg of existing size made to shape from well seasoned first class teak wood duly polished complete all as shown on drg and as directed.

Removing the existing broken / damaged long rail from table and S&F new long rail of existing size made to shape from well seasoned first class teak wood duly polished complete all as shown on drg and as directed.

All as per Item No 42 here in before but short rail

Repair and replacement of new drawer of table made to shape and size, front / back and both sides with well seasoned first class teak wood duly polished with 1 No. knob complete all as shown on drg and as directed.

Repairs to Table Centre FD-274/376 Removing the existing unserviceable table top and S&F new table top of prelaminated particle board 18mm (ISI mark) with 4mm thick teak wood edging all round including tightning of the frame complete all as shown on drg and as directed.

Removing the existing broken / damaged leg from table and S&F new leg of existing size made to shape from well seasoned first class teak wood duly polished complete all as shown on drg and as directed.

Removing the existing broken / damaged long rail from table and S&F new long rail of existing size made to shape from well seasoned first class teak wood duly polished complete all as shown on drg and as directed.

All as per Item No 47.00 here in before but short rail

Repairs to Table Writing:-FD- 275 Removing the existing broken / damaged leg from table and S&F new leg of existing size made to shape from well seasoned first class teak wood duly polished complete all as shown on drg and as directed.

Removing the existing broken / damaged long rail from table and S&F new long rail of existing size made to shape from well seasoned first class teak wood duly polished complete all as shown on drg and as directed.

Removing the existing broken / damaged short rail from table and S&F new short rail of existing size made to shape from well seasoned first class teak wood duly polished complete all as shown on drg and as directed.

Removing the existing broken / damaged stiffener and S&F new sesaned teak wood stiffener duly polished complete all as shown on drg and as directed.

Removing the existing unserviceable table top from table and S&F of new table top of table writing with 18mm thick pre laminated partical board (ISI Marked) with 6mm thick teak wood edging all round duly polished including tightining of the frame complete all as shown on drg and as directed.

Removing the unserviceable drawer from table and replacement of drawer of table writing made to shape and size, front / back and both side of the drawer shall be 18mm thick well seasoned 2nd class hard wood (teak) duly fitted with 1 Nos knob complete all as shown on drg and as directed.

Removing the unserviceable prelaminated particle board / ply from table and S&F pre laminated particle board of 18mm thick in front and both side of table writing and 4mm teak BWR ply wood duly ISI Marked fitted to rear side of the table wiriting duly polished complete all as shown on drg and as directed.

Removing the unserviceable shutter from table and replacement of new shutter of table writing of 18mm thick preleaminated particle board ISI Marked with 4mm thick teak wood edging all round duly polished, fixed with 18" long piano type hinges and including provn of knob complete all as shown on drg and as directed.

Repairs to Bed Hard (Steel) FD-246/247 , FD/E6/MAP/08( R) :- Scrapping old painted surfaces and complete removal of existing paint on surfaces with chemical / aerosal spray and sparay painting of two coats of synthetic enamel paint ( black colour) over a coat of red oxide primer and removal of dents / bends and welding wherever required filling with putty including preparation of surfaces complete all as specificed and as directed. Note :- Bed Hard(steel) as a whole shall be measured as single unit.

Removing existing unserviceable plywood and S&F 12 mm thick commercial plywood BWR grade and with ISI mark conforming to IS 303 complete all as specificed and as directed.

Repairs to Charpoy IP Hard Top of 12mm Ply (FD-MAP-II/01) :- Scrapping old painted surfaces and complete removal of existing paint on surfaces with chemical / aerosal spray and sparay painting of two coats of synthetic enamel paint ( black colour) over a coat of red oxide primer and removal of dents / bends and welding wherever required filling with putty including preparation of surfaces complete all as specificed and as directed. Note :-Charpoy IP hard top as a whole shall be measured as single unit.

Removing existing unserviceable plywood and S&F 12 mm thick commercial plywood BWR grade and with ISI mark conforming to IS 303 complete all as specificed and as directed.

Repairs to Chair CB steel with Arms:-FD 75(M) Removing the existing unserviceable seat from chair and S&F new seat frame made out of well seasoned, first class teak wood including provision of caning holes at 12.5 mm centre to centre duly painted with synthetic enamel paint (first quality) and canning / weaving with not less than 1.8mm width plastic cane and 3mm width cane for border and fixed to frame with suitable bolts & nuts as complete all as specificed and as directed. Note:- (i) Each seat shall be measured as one unit.(ii) The unit rate quoted shall be deemed to include for canning.

All as per item No.61.00 here in before but back frame of chair.

Repairs to Chair CB steel without Arms:-FD-75(M) Removing the existing unserviceable seat from chair and S&F new seat frame made out of well seasoned, first class teak wood including provision of caning holes at 12.5 mm centre to centre duly polishing to glossy finish and canning / weaving with not less than 1.8mm width plastic cane and 3mm width cane for border and fixed to frame with suitable bolts & nuts as complete all as shown on drg and as directed. Note:- (i) Each seat shall be measured as one unit.(ii) The unit rate quoted shall be deemed to include for canning.

All as per item No.63 here in before but back frame of chair.

Repairs to Almirah Large Steel :-FD-1031, FD/E6/MAP/18 :- Scrapping old painted surfaces and complete removal of existing paint on surfaces with chemical / aerosal spray and sparay painting of two coats of synthetic enamel paint (green colour) over a coat of red oxide primer and removal of dents / bends and welding wherever required filling with putty including preparation of surfaces complete all as shown on drg and as directed. Note :- Almirah large steel as a whole shall be measured as single unit.

Repairs to Almirah Medium Steel :-FD-243/350/1032 :- Scrapping old painted surfaces and complete removal of existing paint on surfaces with chemical / aerosal spray and sparay painting of two coats of synthetic enamel paint (green colour) over a coat of red oxide primer and removal of dents / bends and welding wherever required filling with putty including preparation of surfaces complete all as shown on drg and as directed. Note :- Almirah medium Steel as a whole shall be measured as single unit.

Removing the existing unserviceable damaged shelf from Almirah large/medium steel and S & F shelf made out of MS sheet 1 mm thick, bent to shape as required, welding, etc including preparing the new steel and iron surfaces and applying, two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown on drg and as directed. Note :- Each shelf will be measured as one unit.

Removing the unserviceable locks from Almirah and S&F new steel locks (6 lever brass) for Almirah large/med steel of approved quality with duplicate keys complete all as shown on drg and as directed.

Removing and replacing unserviceable handle with new 100 mm chromium plated handle of approved quality for Almirah large/ med steel complete all as shown on drg and as directed.

Repairs to Book Case Steel:- FD-1028 / FD-356 Removing the steel shutters and refixing the same after repair of dents and bents including sliding arrangements for book case complete all as shown on drg and as directed. Note:- Each shutter shall be measured as one unit.

Removing and replacing the old broken glass with 3mm thick plain glass for each shutter and packing wherever required to make intact and tightning the loose fittings complete all as specificed and as directed. Note :- Each shutter will be measured as one unit.

Removing and replacing unserviceable handle with new bow handle of 75mm size steel chromium plated with suitable screws complete all as shown on drg and as directed.

Removing the unserviceable locks and S&F new steel lock (6 lever brass) of approved quality with duplicate keys complete all as shown on drg and as directed.

Repairs to Table Office Officer/Clerk Steel:-FD-1003/1004 Removing the unserviceable drawer from table and S&F new drawer made out of 1mm thick MS sheet made to shape, welding etc, including preparing the new steel and iron surfaces and applying two coats of synthetic enamel paint (OG) over a coat of red oxide primer complete all as shown on drg and as directed. Note :- Each drawer will be measured as one unit.

Removing the unserviceable locks and S&F new steel lock (6 lever brass) of approved quality with duplicate keys complete all as shown on drg and as directed.

Removing the existing unserviceable table top from table office clerk steel and S&F new table top with 18mm thick pre-laminated particle board, with one face decorative lamination and other balancing white, exterior grade, ISI Marked, duly fixed all round with 20 /19mm x 4mm thick teak wood half round beading, duly polished, glossy finish complete all as shown on drg and as directed.

Repairs to Table Computer FD/E6/MAP/03 : Removing unserviceable / worn out components of table top and S&F table top 18 mm thick pre-laminated particle board, exterior grade,both side lamination (shade as that of component as removed) along with appropriate new screws, 'L' clamps and new component with beading as per the existing including all cut ends of laminated sheet sealed by laminated beading complete all as shown on drg and as directed.

All as per item No. 77.00 above but sides of table.

All as per item No. 77.above but key board of table.

All as per item No.77 above but bottom of table.

All as per item No.77 above but drawer of table.

Removing unserviceable / worn out key board drawer with MS telescopic channel and S&F new key board drawer with MS telescopic channel with appropriate screws complete all as shown on drg and as directed.

Removing unserviceable /worn out lock from the drawer of table and S&F new brass lock to match the original complete all as shown on drg and as directed.

Preparation of old painted surfaces by sand paper and sparay painting of one coat of synthetic enamel paint including removal of dents / bends and welding wherever required filling with putty complete all as specificed and as directed for Side rack 3 spaces steel FD-1023 complete all as shown on drg and as directed.

Removing the existing damaged/unserviceable pedestal assembly of computer chair and S& F new pedestal assembly wih 5 Nos twin wheel castors complete all as shown on drg and as directed.

Removing the existing damaged/unserviceable Gas lift of chair executive revolving and S& F new gas lift and make good the centre pivot mechanism of revolving chairs including tilt tension adjustment complete all as shown on drg and as directed.

Chair Varandah Map FD/E6/MAP/11:- Removing existing old unserviceable PVC seat & back and S&F new PVC white colour for Chair verandah map complete all as shown on drg and as directed.

Scrapping old painted surfaces and complete removal of existing paint on surfaces and preparing the surfaces with emery paper and applying two coats of approved synthetic enamale paint over of coat of red oxide primer including providing white colour rubber toes for each leg for Chair varandah complete all as shown on drg and as directed.

Form with and without back :- Welding/ Gas welding to broken parts of form with and without back wherver required and preparing the surfaces with emery paper and applying two coats of approved synthetic enamale paints over of coat of red oxide primer complete all as shown on drg and as directed.

Table Dressing Gents ( FD-230/FD/E6/MAP/16) :- Removing unserviceable old defective mirror and back ply wood of mirror frame of Table Dressing Gents and S&F sheet glass copper electro plated mirror 5mm thick with new plywood commercial BWR grade 6mm thick Ply for back side to mirror frame including french polishing and fixing at the location as directed complete all as shown on drg .

HAT STAND MIRROR (FD-233) Removing unserviceable old defective mirror and S&F 5mm thick belevelled edge looking mirror of size 440x300mm with wooden beading complete all as shown on drg and as directed.

Removing unserviceable peg and S&F new brass peg overall size 120x75mm with brass screw complete all as shown on drg and as directed.

Removing the unserviceable ply wood and S&F of 1000x710x4mm thick comercial plywood to back side of hat stand small complete all as shown on drg and as directed.

Removing the unserviceable edging and S&F new wooden edging of size 35x6mm thick all around the hat stand complete all as shown on drg and as directed.

Removing existing unserviceable PVC bushes from Table officer / Clerk steel, Chair Writing, Chair Easy, Table Bedside , Table Peg, Table Centre, Table 900x600, Table Writing and S&F New PVC Shoe/ bushes at the location complete all as shown on drg and as directed.

Shoe rack Scrapping old painted surfaces and complete removal of existing paint on surfaces with emery paper and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown on drg and as directed.

Repairs to Chair Dining:- FD- 16(M)/228/279 Removing existing old unserviceable plastic cane and S&F new PPCP ( PVC ) seat including french polishing to the surfaces of Chair dining complete all as shown on drg and as directed.

Repairs to Chair Dining:-FD-280 Removing the existing broken / damaged front leg and S&F well seasoned first class teak wood leg duly polished complete all as shown on drg and as directed.

All as per item No. 98.00 above but back leg only.

Removing the existing broken / damaged side rails of seat frame and S&F well seasoned first class teak wood side rail duly polished complete all as shown on drg and as directed.

All as per item No. 100.00 above but front rail of seat frame.

All as per item No. 100.00 above but back rail of seat frame.

Removing the existing broken / damaged centre stifefners and S&F well seasoned first class teak wood stiffeners duly polished complete all as shown on drg and as directed.

Removing the existing broken / damaged bottom (seat) stiffeners and S&F well seasoned first class teak wood bottom stiffeners duly polished complete all as shown on drg and as directed.

Removing the existing damaged/unserviceable caster wheel and S&F caster wheel with licking facilities for diffeent model of computer table complete all as shown on drg and as directed.

Chair Dining with long back (FD 357) : Removing the unserviceable cushion seat and replacing with new cushioned seat frame mounted on 10mm thick commercial ply wood based over 50mm thick 24 density synthetic foam made to shape duly covered with good quality upholstery fabric costing not less than Rs 550/ Rm an ffixing to cushioned to base frame with screws complete all as shown on drg and as directed.

Repairs to Chair Writing:- ( FD/E6/MAP/12) : Removing the unserviceable cushion seat and replacing with new cushioned upholstery with fabric and moulded polyurethene foam with PVC lipping alround complete all as shown on drg and as directed.

Chair revolving variuos models:- ( FD/E6/MAP/12) : Removing the unserviceable gas lift and replacing with hydraulic gas lift maintenance free, environmental friendly chrome free cylinder tube fixed in MS black powder protect outer central colomn tube 38mm dia and 2mm thick , 100mm stroke length , 300N force gas pressure suitable for Chair revolving variuos models complete all as shown on drg and as directed.

Removing the unserviceable pedestal assembly and replacing with pedestal assembly injection moulded in black 30% glass filled nylon 10.5mm dia , forged bright zinc plated MS castor pin of press fitted into each prong for holding the castors with 600mm pitch- centre dia suitable for Chair revolving variuos models complete all as shown on drg and as directed.

Anaswara Constructions (BID ID -3515187)