Loading
Loading…
Loading…
Tender Value
₹74,974
EMD Value
₹1,500
Closing Date
20 Jul 2026, 5:00 pmClosed
Executive Engineer MID Anantnag
Executive Engineer MID Anantnag
Providing, installation and testing of priming system including GI pipes and 03 HP priming pump set for LIS Lethpora.
2026_IFC_315325_1
e-Nit 14 of 2026-27
Open Tender
Machineries/ Mechanical Engg Items
Turn-key
15 days
Lethpora
Please refer Tender documents.
2 documents required · 2 mandatory
₹100
Yes
Cheif Engineer Iand FC Srinagar
₹1,500
Yes
30 Jul 2026
9 Jul 2026
21 Jul 2026
9 Jul 2026
20 Jul 2026
9 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing, installation, testing and commissioning of 250 – 400 lpm priming pump coupled with 3 HP capacity single phase electric motor on common base frame. The unit shall be of standard quality / reputed make complete with starter. The priming pump shall be installed at foundation block. | 1 | Job | - | - |
| 2 | Providing and fitting of GI pipes (B-Class) of nominal size: 50 mm as suction pipe for priming circuit | 30 | mtr | - | - |
| 3 | Providing and fitting of GI Bends (B-Class) of nominal size: 50 mm | 4 | Job | - | - |
| 4 | Providing and fitting of C.I flanged foot valve conforming to IS-4038 including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete: (Preferred make: Kirloskar or equivalent). Size 50 mm | 1 | Job | - | - |
| 5 | Providing and welding of steel plate flanges of nominal pressure rating 1.0MPa as per IS 6392 with nominal sizes 50 mm | 12 | No | - | - |
| 6 | Providing, installation, testing of GOL starter for 5 HP capacity suitable for single phase motor. | 1 | Job | - | - |
| 7 | Providing and fitting of 10 mm square 2-core Aluminum cable of Havells make for operation of the priming motor. The job also includes providing and fitting of proper cable terminals and crimping the same using a crimping tool. | 20 | mtr | - | - |
| 8 | Providing and fitting of ISI mark gun metal / SS ball valve. (preferred make: sant or equivalent)- 02 No. The job also includes Providing of Ring Spanner Set of Size (12/13 to 30/32) (01 complete set), Cutting Pliers, 8 inch: (01 No), Screw Driver 8 inch (01 No) | 1 | Job | - | - |
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.47 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.42 MB
BOQ_1022452.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .