Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 LAccepted-AOC 63 47 49 1ST FLOOR BAKRAHAT ROAD THAKURPUKUR KOLKATA 700063 | KOLKATA | WEST BENGAL | 700063 | L1 | Accepted-AOC Being a lowest bidder and reasonable. | |
| 2 | L2₹48.3 L+₹9.1 L (23.1%)Rejected-Finance VILL JETHIA NATUN PARA PO JETHIA HALISAHAR PIN 743135 | 24 PARAGANAS NORTH | WEST BENGAL | 743135 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹49.7 L+₹10.5 L (26.7%)Rejected-Finance 52A 1A NAZIR LANE KIDDERPORE KOLKATA 700023 | KOLKATA | KOLKATA | WEST BENGAL | 700023 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹50.6 L+₹11.3 L (28.8%)Rejected-Finance P 45 KHIRODE VIDYA BINOD AVENUE KOLKATA 700003 | KOLKATA | WEST BENGAL | 700003 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹51.4 L+₹12.1 L (30.9%)Rejected-Finance 8 28 BIJOYGARH P O JADAVPUR KOLKATA 700 032 | KOLKATA | WEST BENGAL | 700032 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
10 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
COMPREHENSIVE REPAIR AND MAINT OF BLOCK NO KP-01 TO KP-08 (G 3) OUTSIDE FORT WILLIAM UNDER GE (FW) KOLKATA
2024_MES_653774_1
8248/E8
Open Tender
Civil Works
Item Rate
270 days
GE (FW) Kolkata
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (FW) Kolkata
₹90,000
30 Sept 2024
14 May 2024
11 Jun 2024
14 May 2024
10 Jun 2024
27 May 2024
Amount
S&F in repair Chromium plated brass Pillar tap, fancy type. with aerator, fixed to wash hand basin, complete all as specified and directed. (Make : ESS ESS, Cat No: RO-101 / PRAYAG, Cat No: 6702 / Essco, Cat No: SQT-507KN / SOMANY, Model: ETHER) or other equivalent make of items approved make mentioned in tender).
S&F in repair Chromium plated brass Bib cock with wall flange, fancy type, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Ess Ess, Cat No: RB-103 / PRAYAG, Cat No: 6706 / Essco, Cat No: SQT-512KN / / /SOMANY, Model: ETHER) or other equivalent make of items approved make mentioned in tender).
S&F in repair 15mm bore chromium plated two way bib cock with flange, fancy type complete all as specified and as directed. (Make : Ess Ess, Cat No: RO-103A / PRAYAG, Cat No: 6712 / Essco, Cat No: SQT-512ANKN /SOMANY, Model: ETHER) or other equivalent make of items approved make mentioned in tender).
S&F in repair chromium plated brass over head shower rose with arm, with 3 flow, fixed to 15mm bore of iron pipe complete all as specified and directed. (Make : Essco, Cat No: ALE-536A & EOS-542N / ESS ESS, Cat No: SA-101 & OH-202 / PRAYAG, Cat No: BS-73 / SOMANY, Model: ETHER) or other equivalent make of items approved make mentioned in tender).
S&F in repair Chromium plated brass Wall mixer, concealed type, with concealed body, with overhead shower arrangement fixed with 15 mm bore Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No : FUS-29273UPR / PARRYWARE, Cat No: G4816A1 / CERA, Cat No: F1003401 / ASIAN PAINTS, Cat No: ALWM103 / PRAYAG, Cat No: 9375-N / HINDWARE, Cat No: F390020) or other equivalent make of items approved make mentioned in tender).
S&F in repair, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : Ess Ess, Cat No: RO-332 & E-2211 / PRAYAG, Cat No: 6718 / / Essco, Cat No: SQT-514EKN /SOMANY, Model: ETHER) or other equivalent make of items approved make mentioned in tender).
S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make :ESS ESS, Cat No: RO-112 / PRAYAG, Cat No: 6710 / ESSCO, Cat No: SQT-526NKN / SOMANY, Model: ETHER) or other equivalent make of items approved make mentioned in tender).
S&F in repair chromium plated Hand shower (health faucet), ABS body with 1.0 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : ESS ESS, Cat No: C-232X / PRAYAG, Cat No: 451 / ESSCO, Cat No: ALE-IVY-583 / SOMANY, Model: ETHER) or other equivalent make of items approved make mentioned in tender).
S&F in repairs, Tubular towel rail, 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : ESS ESS, Cat No : AC-701 / Essco, Cat No : AEC-1111N / PRAYAG, Cat No: BA-40 / SOMANY, Model: ETHER) or other equivalent make of items approved make mentioned in tender).
Repair to CP brass item of Bib tap, Stop cock, Pillar tap, angular cock, shower rose, hand shower, health faucet etc of 15mm size including replacement of washer/spindle if required in day to day maintenance.
S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed by Engineer-in-Charge.
S&F in repair PVC connection 450mm long fixed with 15mm GI pipe complete all as specified and directed
All as per here in before but 600mm long.
S&F in repair Plastic seat cover in white or any colour of EWC with flat bottom incl hanging device complete all as specified and directed.
S&F in repair 32 mm bore CP bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms) connected to pipe complete all as specified and directed
S&F in repair 10 liters capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART /ESSCO, Cat No: WHE-WHT-183NL)
Repair only to flushing cistern incl cleaning and replacement of washer and syphonage of suitable size if required complete all as specified and directed.
Taking up or down steel water tubing 15 mm bore incl connection , cleaning etc complete all as specified and directed.
All as per item No 19 her in before but 20 mm bore
All as per item No 19 here-in-before but 25mm bore.
S&F tubes 15mm bore medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
All as per item No 22 here-in-before but 20mm bore.
All as per item No 22 here-in-before but 25mm bore.
Refixing old steel tubing 15mm bore and connection in new or old position(wall, ceiling, floor etc.).
All as per item No 25 here-in-before but 20mm bore.
All as per item No 25 here-in-before but 25mm bore.
S&F in repair of 1000 liters capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including suitable float valve fixed with GI pipe complete all as specified and directed.
Disconnecting of existing tanks 1000 ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) etc, compete all as directed.
Dismantling of floor hearth, wall tiling incl cement mortar bedding( but not backing) removing of serviceable tiles to store and rubbish off the premises complete all as specified.
M&L for 40mm thick PCC 1:2:4 type B-1(using 20mm graded stone aggregate) as in sub base of floor complete all as specified and directed.
M&L joint free coloured tiles 7-8mm thick area of each tiles exc 0.11 sqm but n.exc0.18sqm (400X400X7-8mm),as in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bedding in CM 1:6 complete all as specified and directed.
M&L coloured glazed ceramic tiles in vertical surfaces 450X300X7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat in CM 1:4 complete all as specified and directed.
Repair/refixing of WHB with new brackets fixed on wall complete all as directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key and scrubbing down with water complete All as specified and as directed.
M&L 15mm thick cement plaster on brick or concrete walls finishing fair and even in CM 1:4 complete all as directed.
M&L 10 mm thick cement plaster on brick or concrete surfaces without using extra cement finishing fair and even in CM 1:6 including necessary scaffolding complete all as directed.
M&L for rendering 5mm thick on fair faces of brick work or concrete ceiling surfaces in CM 1:3 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed
Material & Labour for new plaster surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
M&L Preparing new Plaster Surfaces of Wall and applying two Coats of oil bound distemper complete all as specified and as directed.
M&L Preparing new plaster surfaces of ceiling and applying two Coats of oil bound distemper complete all as specified and as directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc including PVC seat cover complete all as specified and directed. (Make: Parryware, Model : Elite / ESSCO, Model: ELEMENTS / CERA, Model: Conventional / HINDWARE, Model: SLICK / ASIAN PAINTS, Model: TREND / ) (NOTE: Cost of seat cover, hinges etc shall be deemed to be included in the quoted rate).
S&F in repair Vitreous China Wash Hand Basin 630x450mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0406/ CERA, Cat No: S2040119 / HINDWARE, Cat No. 10100 / PRAYAG, Cat No: 4645 / ASIAN PAINTS, Cat No: PN-03-X / ESSCO, Cat No: ECS-WHT-801) (NOTE: Waste coupling and Waste pipe shall be measured and paid separately).
S&F in repair 40mm dia PVC pipe with bend complete fixed on walls, ceilings and floors incl GI/PVC clamps, bends sockets etc incl taking down U/S old PVC pipes complete all as specified and directed.
M&L for small repair of hinges for door and window, adjustable for sliding door bolts, tower bolts, repair of handles, mortice locks etc for similar type of works complete all as directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden all as directed.
Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 Sqm each all as directed.
S&F for 2nd class HW, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, moulded or chamfered, put together with glue, pinned at joints complete all as directed.
S&F 30mm thick 2nd class hard wood glazed & skeleton shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.20(a) complete all as directed.
S&F Factory made 30mm thick with 2nd class hard wood, rail and style factory made plain framed panelled shutter with lock, rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS:1003(Part-I) kiln seasoned and chemically pressure treated.
Taking down PVC door shutter with PVC chowkats including all fittings area exc 1.00 Sqm but n.exc 2.00 Sqm all as directed.
S&F Factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, S&F in opening as per specification & drg as per manufacturer instructions complete all as specified and directed.
s& f Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelim PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F 100 mm stainless steel butt hinges (medium weight) cold rolled complete all as specified and directed.
S&F 75mm stainless steel butt hinges (medium weight) cold rolled complete all as specified and directed.
S&F 125 mm long aluminium anodised handles (cast type) ISI marked complete all as specified and directed.
All as per item No 56 here-in-before, but 150mm.
S&F 150 mm long aluminium anodised tower bolts extruded section, ISI marked complete all as specified and directed.
S&F 200 mm long aluminium anodised tower bolts extruded section, ISI marked complete all as specified and directed.
S&F 300mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as directed complete all as directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as directed.
All as per item No 61 here-in-before, but fixed in repair.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F 3 mm thick ordinary quality sheet glass/frosted glass and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as directed.
. All as per item No 64 here-in-before, but fixed in repair.
Taking down steel window/ventilators of any size including grill/guard bars and removing to store complete all as directed.
S&F in repair powder coated (medium thickness of powder coating 50 micron) aluminium frame for door, windows, partitions and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F powder coated anodised aluminium window and ventilator shutters, side hung type with sash bars, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as suitable peg stays, hinges and handles-02Nos etc with 4mm thick tinted/frosted glass ordinary quality as per manufactures instruction complete all as specified.
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineering-charge.
S&F 4mm thick ordinary quality sheet glass/frosted glass and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as directed.
Preparing new steel surface of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.
Preparing new surface of wood or wood based material of any description and in any position not otherwise described n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.
S&F 20mm dia fancy type Harrison rails (Curtain rod) mild steel, chromium plated including fixing brackets, stops, rollers et fixed on wall sample as approved by GE complete all as directed.
M&L in repair 18/19mm thick pre-laminated particle board as in cup board shutter double leaf one side decorative of sheds and other side balancing white lamination. All edges properly sealed with 5mm thick 2nd class hard beading fixed with water resistant adhesive except rebate side which shall be of 25mm thick as in repair complete all as directed.
S&F in repair drawer knobs 40 mm dia of brass polished fixed with nut screw and washer all as directed.
M&L in repair for 300mm MS ordinary helical springs including roller and roller plate complete all as directed.
M&L in repair19 to 20 mm thick black/coloured granite machine cut laid over 10mm thick screed bed in cm 1:4 and jointed with grey or coloured cement to match with admixture of pigment to match the shade of granite including cutting polishing all as specified and as directed.
M&L for providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.
M&L for providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.
M&L Preparing old decorated Plaster Surfaces of Wall and applying two Coats of oil bound distemper complete all as specified and as directed.
M&L Preparing old decorated plaster surfaces of ceiling and applying One Coat of oil bound distemper complete all as specified and as directed.
M&L Preparing old Wooden Surfaces of any description not otherwise described over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
M&L Preparing old Painted Steel Surfaces over 10 Cm width or girth not otherwise described and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
Taking down plants and vegetation from walls upto roof level by means of cutting Holes in Brick Walls, built in Cement Mortar of 150mm depth making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required n exc 150 sq.cm in superficial area, complete all as specified and as directed.
M&L for cleaning of inaccessible areas of roof including parapet walls upto 0.50 metre height, removal of vegetation growth, including uprooting, if required and repair to broken/chipped off plastered surfaces with cement mortar 1:4, mixed with water proofing compound @ 3% by weight of cement, finished fair and even including necessary ladder/scaffolding complete all as specified and directed. (NOTE: Water Proofing Compound shall be measured and paid separately).
M&L for cleaning of outer surfaces of down take pipes, any type, treating minor leakages at joints, clearing of vegetation, scraping of algae growth with wire brush, chipping of damaged plaster at the joints (area not exc 0.50 sqm) and making good with cement mortar 1:4 duly mixed with water proofing compound @ 3% by weight of cement and applying one coat of tartaric acid on dry finished plaster surface including necessary ladder/scaffolding complete all as specified and directed.
M&L for anti termite treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area all as specified and directed.
M&L for anti termite treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface area all as specified and directed.
M&L for anti termite treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall all as specified and directed.
M& L for water proof film coating (elastic and breathable),in two layers (as per manufacturers instructions) ,for patch repair of damp and repaired wall over old or new plastered surfaces of walls including preparation of surfaces complete all as specified and directed.
M& L for providing and applying shali urethane BTD,UV resistant, high performance, water based, cold applied, single component elastomeric in-situ liquid membrane for waterproofing conforming to ASTMC836a and ASTM D 6083 on top of concrete roof in two coats @9. kg/10 sqm for 500 microns DFT. one coat of self priming of elastomeric water proofing liquid (dry, film thicknessaration shall be carried out s of complete application/system as per direction of engr-in-charge. the operation shall be carried out after scrapping and properly cleaning the surface remove loose particles with wire brushes, complete in all respect as per the direction of engineer in charge.
Mel for painting of exposed brick surface including surface preparation by hand operated or power operated tools i.e scrappers, wire brushes, sand papers, pumice stone etc. painting should be done in two coats of thickness of 100 microns each by anti corrosive bituminous black paint tank mastic 100 or similar conforming to IS:9862 as approved by Engr-in-charge @2.50 ltr/10 sqm with interval of 8 hrs between two coats. The rate as inclusive of all contractors own labour, materials, tools and plants, leads, lifts, transportation, taxes, octroi etc complete as per approved drawing and as directed by the Engr-in-charge.
S & F for extra for addition of polymerised acrylic polymer with 47% solid content shalicrete 47 of STP or similar make as approved by engr-in-charge in cement plaster/mortar in weight ratio of 50:5 for cement and polymerised acrylic polymer used in cement mortar as per directions of Engineer in Charge.
M& l application &finishing with UV resistant elastomeric anti-carbonation exterior acrylic wpt coating with 2 coats of shalicryl ( R) 215 of M/S STP ltd or similar as approved by Engr-in-charge @3.08 ltr/10 sqm at all locations & levels, prepared and applied as per manufacturers specifications including preparation of surface by filling of pin holes with cement putty, honey combing, grinding of edges (if required any) etc. complete. grinding of excess loose materials in grooves of segment joint and filling of putty in these grooves to make the entire span lengh monolithic. The coating should be applied over a primed coat of shali prime (R ) WB of M/S STP ltd or similar as approved by engr-in-charge@ 1.25 ltr/10 sqm diluted in the ratio of 1:0.5 to achieve even shade and colour, all complete as per manufacturers specifications as per direction s of Engr-in-charge. The rate is inclusive of all contractors own labour.
Providing and fixing double steel scaffolding system (cup lock type) on the exterior side of shaft portion (only) of building of any height including additional rows of scaffolding in stepped manner as per requirement of site, made with minimum 40mm dia M.S. Tube, placed 1.5 metre centre to centre (maximum), horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. Tube challis, M.S. Clamps and staircase system in the scaffolding for working platform etc and maintaining it in a serviceable condition for execution of work and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of GE. Notes:- (1) The elevational area of shaft portion of building (length/breadth of shaft X height of shaft) covered with scaffolding shall only be measured for payment purpose. (2) The payment shall be made for one time only for execution of all items of each face of shaft portion of building. (3) After completion of work all scaffolding materials shall be removed from building /structure by the contractor and the same shall be the property of the contractor and accordingly rate shall be quoted.
Dismantling of 100mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches/walls including all fittings and necessary scaffolding upto any height of bldg, all as specified and as directed.
S&F for 100 mm dia Cast iron sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors etc complete all as specified and directed.
S & F 100 mm bore Cast iron (sand cast) soil, waste and vent pipes in any length with or without ears with cement joints, fixed to walls etc complete including necessary scaffolding upto any height Building all as specified and directed.
S&F for repair 100mm PVC/ CI Bore of pipe for Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof including necessary scaffolding upto any height building all as specified and directed.
S & F for CI bend 100 mm bore with oval access door.etc complete including necessary scaffolding upto any height all as specified and directed
S & F for bend / Tee 100 mm bore etc complete including necessary scaffoliding up to any height of building all as specified and directed.
S & F for CI branch piece single (equal or unequal) for 100 mm bore pipe etc complete including necessary scoffolding to any height of building all as specified and directed.
S&F for 100 mm bore Cast iron cowls including necessary scaffoliding up to any height of building all as specified and directed.
S & F in repair 100 mm bore cast iron rain water socket pipes with cement joints without ears etc fixed to wall complete including necessary scoffolding to any height of building all as specified and directed.
S & F in repair 100 mm bore CI rain water bends or elbow square etc complete including necessary scaffolding to any height of building all as spd and as directed.
Taking down 100/75mm PVC (SWR) Soil /RWP pipe including all fittings such as bends, shoe etc., complete taking out from foul places including necessary scaffolding upto any height, complete all as specified and as directed.
S & F in 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete including necessary scaffolding to any height of building all as specified and directed.
S & F 110 mm bore PVC bends etc complete including necessary scaffolding to any height of building all as specified and directed.
S&F 110 PVC (SWR) brance piece, single (Single Y) equal or unequal including necessary scoffolding to any height of building all as specified and directed.
S&F110 PVC (SWR) Junction single (Single T) equal or unequal including necessary scoffolding to any height of building all as specified and directed.
S & F in 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete including necessary scaffolding to any height of building all as specified and directed.
S & F 75 mm bore PVC bends etc complete including necessary scaffolding to any height of building all as specified and directed.
S&F 75 PVC (SWR) brance piece, single (Single Y) equal or unequal including necessary scoffolding to any height of building all as specified and directed.
S&F75 PVC (SWR) Junction single (Single T) equal or unequal including necessary scoffolding to any height of building all as specified and directed.
Chipping of unsound /weak concrete materials including cover plaster from RCC structural member i.e. slabs, beams, columns, lintel, chajja, fins, facia etc. of 50 mm average thickness (Any storey/ height of building/ structure) including tapering all edges, making square shoulders of cavities by air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting including removal of foreign materials, loose concrete/aggregate etc and disposal of all debris out side of MOD land and complete all as specified and as directed by Engr-in-Charge.
Deduct / Add for below / over 5mm or part thereof thickness for item No 122 (Any storey/ height of building/ structure)
M&L for applying chloride free rust removing chemical on rusting steel reinforcement bar as per manufacturer's specification and removing all rust from steel reinforcement bar by wire brush & sand/emery paper (after 24 hours of application of rust remover) and cleaning the area thoroughly by water with the help of pressure jet and allowing it to dry and making the reinforcement bar totally rust free (for any storey/ height of building/ structure) complete all as specified and as directed. (Make of Rust removing chemical :- Reebaklens RR of FOSROC or equivalent product other makes specified in tender) (NOTE: Surface area of cleaned steel reinforcement shall be measured for payment).
M&L for introducing new mild steel TMT reinforcement bars for structural connection in RCC beams, columns, lintel and slabs (for any storey/ height of building/ structure) including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and up to 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges, plastic nozzles etc., as per manufacturer's instructions etc all as specified and directed. (Make of epoxy chemical :- Lockfix E75 of FOSROC / Hilti HY 150 or equivalent product other makes specified in tender) (NOTE: Reinforcement bars shall be paid separately).
M&L for preparation of old existing corroded and new introduced reinforcement surface (at any storey/ height of building/ structure) by brush and application of two component epoxy based zinc rich primer, of minimum specific gravity 1.75, adhesive bond strength with steel as 1.50N/mm2, as a protective coating to steel reinforcement bars in concrete with total zinc content in dry film >90% by volume and DFT per coat >50 microns complete all as specified and directed. (Make- Nitozinc primer of FOSROC or equivalent product in other makes specified in tender) (NOTE: Surface area of steel reinforcement shall be measured for payment).
Material & labour for placing in position free flow shrinkage cementitious micro concrete of compressive strength, flexural strength shall not be less than 50 MPa at 28 days, 5MPa at 28 days respectively for strengthening of beams, columns & other structural elements of average thickness 50mm and including surface preparation & suitable type formwork etc. as per manufacturers instruction complete all as specified and as directed.. (Make of micro concrete:- Renderoc RG of FOSROC or equivalent product in other makes specified in tender).
Deduct / Add for below / over 5mm or part thereof thickness for item No 127.
M&L for applying a coat of epoxy bonding agent on existing concrete surfaces, with mixed density 1.48 Kg/litre and adhesive bond strength>2.50 MPs, mixed and applied as per manufacturer's specifications complete all as specified and directed. (Make- Nitobond EP of FOSROC or equivalent product in other makes specified in tender) (NOTE: Measurement shall be considered for the surface area of RCC member.
Material , labour and applying of high efficiency polymeric resin base film forming curing agent/compound over concrete surface and maximum coverage area 5.00 Sqm per litre as per manufacturers instruction (for any storey/ height of building/ structure) complete all as specified and as directed. (Make:- Concure LP90 of FOSROC or equivalent product in SIKA / PIDILITE / BASF / CHOKSEY)
M&L for applying shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar, as per manufacturers instructions to get a compressive strength of 35 MPA after 28 days, finishing surfaces even and smooth including formwork, scaffolding etc complete all as specified and directed. (Make- Rendroc SP 40 of FOSROC or equivalent product in other makes specified in tender) (NOTE: Measurement shall be considered for the surface area of RCC member.
S&F Mild steel TMT bars 10 mm dia and over, cut to length and bent to shape as reqd, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed.
S&F Mild steel TMT bars 6-8 mm dia , cut to length and bent to shape as reqd, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed.
Providing Skilled labour services for day to day minor repair & maintenance of daily complaints receive at complaint cell for plumbing and carpenting works including fixing of MES store items for MAP accn ,POR ,KP, HRI ,JCO club & OTM accn, in one shift per day except sunday & holidays by employing 01 pipe fitter to GE(FW) Kolkata and all as specified & directed. NOTE;- (a) The contractor has to depute 01 no skilled pipe fitter for above mentioned job for ZONE-I area daily from 8.30 AM to 5.00 PM (b) All tools & Plants required for Job to be provided by contractor.
(E/M PORTION) Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge.
Material and labour for point wiring for the followings with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and capping including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth continuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick including making good all disturbed surfaces to match the existing complete all as specified and directed as below :- (a) One light/fan point controlled by one, one way switch.
All as per item No 129 but one bell point controlled by one push button switch.
All as per item No 129 but one 3 Pin 5 Amps socket out let point on independent board.
All as per item No 129 but one 3 Pin 5 Amps socket out let point on same board along with other suitable switchs.
All as per item No 129 above here-in-before but using 2.5 sqmm PVC FRLSH insulated copper conductor wire for connecting 15A socket on independent board complete all as specified/directed.
Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, one way complete all as specified/directed.
Supply and fixing of bell push piano flush type one way 240 Volts 5 Amps all as specified/directed.
Supply and fixing of switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) complete all as specified/ directed.
Supply & fixing of socket outlet 2 in 1,3 pin 5 Amps 240 Volts flush type (non shuttered) complete all as specified / directed.
Supply and fixing of switch socket out let combination multipurpose 3 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified/directed.
Supply and fixing of bell electric, 240 Volts, single pole complete all as specified and directed.
Supply & fixing of ceiling fan regulator electronic, Deluxe, rotary, step type, 120/280 volts as specified and directed.
Supply and fixing of Bulb holder angular PVC/Polycarbonate suitable for batten fittings complete all as specified and directed.
Supply and fixing of ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make Havells Cat No LUMILINE + BS20WLED840SPCSS or equivalent make specified in tender.
Supply and fixing LED lights fitting 1x 10 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make Havells Cat No LUMILINE + BS10WLED840SPCSS or equivalent make specified in tender.
S & F in Replacement for fittings with twin core PVC insulated and overall PVC sheathed cable with stranded aluminium conductor 1100 volts grade of size 4 sqmm including taking down old unserviceable wiring complete all as specified and directed.
Supply and fixing in repair of switch piano flush type 240 Volts 5 Amps, SP, one way, fix in repair including taking down old unsv complete all as specified/directed.
Supply and fixing in repair of bell push piano flush type one way 240 Volts 5 Amps, fix in repair including taking down old unsv complete all as specified and directed.
Supply and fixing in repair of switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) ,fix in repair including taking down old unsv complete all as specified and directed.
Supply & fixing in repair of socket outlet 2 in 1,3 pin 5 Amps 240 Volts flush type (non shuttered),fix in repair including taking down old unsv complete all as specified and directed.
Supply and fixing in repair of switch socket out let combination multipurpose 3 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered), fix in repair including taking down old unsv complete all as specified and directed.
Supply & fixing in repair of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet including taking down old unsv complete all as specified and directed.
Supply and fixing in repair of bell electric, 240 Volts, single pole, fix in repair including taking down old unsv complete all as specified and directed.
Supply and fixing in repair of Bulb holder angular PVC/Polycarbonate suitable for batten fittings, fix in repair including taking down old unsv complete all as specified and directed.
S&F Fan step regulator, 120W - 2 module complete all as specified and directed.
S&F Fan capacitors 2.5 mfd complete all as specified and directed.
Supply and fixing in repair of MCB SPN DB 8 way double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08 complete incl taking down old unsv all as specified and directed.
Supply and fixing in repair of MCB SPN DB 4 way double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08 incl taking down old unsv complete all as specified and directed by Engr-in-charge.
Supply & fixing in repair of MCB TPN 63 Amps 'B' Series 10 KA 415 volts incl taking down old unsv complete all as specified/directed.
Supply & fixing in repair of MCB SPN 40 Amps 'B' Series 10 KA 240 volts incl taking down old unsv complete all as specified/directed.
Supply & fixing in repair of MCB SP 6-32 Amps 'B' Series 10 KA, 240 volts incl taking down old unsv complete all as specified/directed.
Supply and fixing in repair of single Pole & Neutral enclosure with 2 pin and earth plug & socket for incorporating with single pole 20 Amp SP MCB all as complete including taking down old unsv one and directed.
Supply and fixing in repair of AC short circuit protection motor starter 25 Amps capacity, 230 Volt with MCB DP 25 Amps, plug top & socket complete 6 M including taking down old unsv complete all as specified and directed.
Supply and fixing in repair LED lights fitting 1x 20 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make Havells Cat No LUMILINE + BS20WLED840SPCSS or equivalent make specified in tender.
Supply and fixing in repair LED lights fitting 1x 10 W, 220V, AC decorative box with aluminum housing type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make Havells Cat No LUMILINE + BS10WLED840SPCSS or equivalent make specified in tender.
Supply and fixed in repair PVC terminal Rectangular boxes of suitable size with 3 mm thick PVC /plastic laminated sheet, top cover suitable sizes of brass screws and washers etc. for mounting switches, sockets, regulators etc of size 100mmx100mmx50mm deep depends on the no of switch and socket complete all as specified and directed.
Material & labour for Sub main wiring with two runs of single core 4 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn through and including PVC casing capping of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 4 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.
Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn through and including PVC casing capping of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 6 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.
Material & labour for Sub main wiring with two runs of single core 4 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn IN EXISTING CONDUIT and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 4 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.
Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.
BASU AND CO (BID ID -3023799)
M/S S. K. SARKAR (BID ID -3014387)
UNIVERSAL TRADING CENTRE (BID ID -3015513)
DEB AND COMPANY (BID ID -3013765)
MUKHERJEE ENTERPRISE (BID ID -3014043)
RAJ ENTERPRISE (BID ID -3023405)
MARUTI ENTERPRISES (BID ID -3016520)
MS HORIZEN (BID ID -3022406)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .