Renovation and Conversion of D Block (Ground Floor) of Administrative Building into Projects Office Building in Bokaro Steel City, Jharkhand

ABSTRACT OF COST

Name of the work :Cost Estimate for Renovation and conversion of D Block (Ground Floor)

of Administrative Building into Projects office building at Bokaro Steel City, Jharkhand.

S.H. No. Description of Sub-Head Amount (Rs) Amount (Rs)

1 Civil Finshing Works : 1,89,29,998 16,57,648

2 Electrical Works : 78,64,603 62,99,987

3 Plumbing Works : 11,61,227 13,94,265

4 HVAC Works : 53,97,038

5 Conference furniture 29,34,980

After Correction Factor 0.973 Included in Rate

Addl. Cost Index on DSR Included in Rate

W Grand Total 4,56,39,745

W Grand Total 4,56,39,745

Digitally signed by PRIYA

ABSTRACT OF COST

Name of the work : Renovation and conversion of D Block (Ground Floor) of Administrative

Building into Projects office building at Bokaro Steel City, Jharkhand.

S.H. No. Description of Sub-Head Amount (Rs)

A Schedule Items

01. Earth Work : 3,82,468

02. Concrete Work : 2,42,930

03. Reinforced Cement Concrete : 8,88,890

04. Masonry Work : 29,98,357

06. Cladding Work : 8,46,433

07. Wood and P.V.C. Work : 23,20,752

08. Steel Work : 9,80,944

11. Finishing : 42,13,540

19. Aluminium Work : 13,89,586

20. Water Proofing : 1,23,555

24. New Technologies and Materials : 89,750

B Non Schedule Items : 16,57,648

EstimateDigitally

signed by PRIYA

Description of Item Quantity unit Rate (Rs) Amount(Rs)

Sub-Head : Earth Work

2.6 Earth work in excavation by mechanical means (Hydraulic

excavator) / manual means over areas (exceeding 30cm in

depth, 1.5m in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth, lead up to

50m and lift up to 1.5m,as directed by Engineer-in-

2.6.1 All kinds of soil 55.50 Cum 189.98 10543.79

2.7 Earth work in excavation by mechanical means (Hydraulic

excavator) / manual means over areas (exceeding 30 cm

in depth, 1.5m in width as well as 10 sqm on plan)

including getting out and disposal of excavated earth, lead

up to 50 m and lift up to 1.5m, as directed by Engineer-in-

2.7.1 Ordinary rock 5.55 Cum 533.97 2963.55

2.25 Filling available excavated earth (excluding rock) in 47.79 Cum 209.78 10025.33

trenches, plinth, sides of foundations etc. in layers not

exceeding 20cm in depth, consolidating each deposited

layer by ramming and watering, lead up to 50 m and lift

2.25A Excavating, supplying and filling of local earth (including 10.00 Cum 749.75 7497.45

royalty) by mechanical transport up to a lead of 5 km, also

including ramming and watering of the earth in layers not

exceeding 20 cm in trenches, plinth, sides of foundation

etc., complete.

Digitally signed by PRIYA

Description of Item Quantity unit Rate (Rs) Amount(Rs)

2.27 Supplying and filling in plinth with sand under floors, 18.02 Cum 2273.05 40952.17

including watering, ramming, consolidating and dressing

2.28 Surface dressing of the ground including removing

vegetation and inequalities not exceeding 15 cm deep and

disposal of rubbish, lead up to 50 m and lift upto1.5 m.

2.28.1 All kinds of soil. 160.00 Sqm 36.55 5848.12

2.34 Supplying chemical emulsion in sealed containers

including delivery as specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% 268.13 Ltr 251.25 67367.19

2.35 Diluting and injecting chemical emulsion for POST-

CONSTRUCTIONAL anti- termite treatment (excluding the

cost of chemical emulsion) :

2.35.3 Treatment of soil under existing floors using chemical

emulsion @ one litre per hole, 300 mm apart including

drilling 12 mm diameter holes and plugging with cement

mortar 1 :2 (1 cement : 2 Coarse sand) to match the

existing floor :

2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% 715.00 Sqm 331.85 237270.26

Total of the Sub-Head - Earth W ork : 382467.86

Sub-Head : Concrete Work

4.1 Providing and laying in position cement concrete of

specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from 11.00 Cum 7290.88 80199.72

natural sources : 8 graded stone aggregate 40 mm

nominal size derived from natural sources).

4.17 Making plinth protection 50mm thick of cement concrete 85.00 Sqm 801.98 68167.94

1:3:6 (1 cement : 3 coarse sand (zone-III) derived from

natural sources : 6 graded stone aggregate 20 mm

nominal size derived from natural sources) over 75mm

thick bed of dry brick ballast 40 mm nominal size, well

rammed and consolidated and grouted with fine sand,

including necessary excavation leveling & dressing &

finishing the top smooth.

4.20 Providing and laying in position ready mixed or site

batched design mix cement concrete for plain cement

concrete work; using coarse aggregate and fine aggregate

derived from natural sources, Portland

Pozzolana/Ordinary Portland/Portland Slag cement,

admixtures in recommended proportions as per IS : 9103

to accelerate/ retard setting of concrete, to improve

durability and workability without impairing strength;

including pumping of concrete to site of laying, curing,

carriage for all leads; but excluding the cost of centering,

shuttering and finishing as per direction of the Engineer-

in-charge; for the following grades of concrete.

Note : Extra cement upto 10% of the minimum specified

cement content in design mix shall be payable separately.

In case the cement content in design mix is more than

110% of the minimum specified cement content, the

contractor shall have discretion to either re-design the

mix or bear the cost of extra cement.

4.20.1 All works up to plinth level:

4.20.1.1 Concrete of M-10 grade with minimum cement content of 10.00 Cum 9456.26 94562.61

Total of the Sub-Head - Concrete W ork : 242930.27

Sub-Head : Reinforced Cement Concrete

Digitally signed by PRIYA

Description of Item Quantity unit Rate (Rs) Amount(Rs)

5.3 Reinforced cement concrete work in beams, suspended 25.00 Cum 12314.34 307858.42

floors, roofs having slope up to 15 ° landings, balconies,

shelves, chajjas, lintels, bands, plain window sills,

staircases and spiral stair cases above plinth level up to

floor five level, excluding the cost of centering, shuttering,

finishing and reinforcement with 1:1.5:3 (1 cement : 1.5

coarse sand(zone-III)derived from natural sources : 3

graded stone aggregate 20 mm nominal size derived from

natural sources).

5.9 Centering and shuttering including strutting, propping etc.

and removal of form for :

5.9.4 Shelves (Cast in situ) 105.00 Sqm 992.44 104205.75

5.9.21 Lintels, beams, plinth beams, girders, bressumers and 40.00 Sqm 901.14 36045.56

cantilevers with water proof ply 12 mm thick

5.22A Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position and

binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or 3091.31 Kg 115.43 356835.65

5.30 Add for plaster drip course/ groove in plastered surface or 120.00 m 83.91 10069.38

moulding to R.C.C. projections

5.33 Providing and laying in position ready mixed or site

batched design mix cement concrete for reinforced

cement concrete work; using coarse aggregate and fine

aggregate derived from natural sources, Portland

Pozzolana/ Ordinary Portland/ Portland Slag cement,

admixtures in recommended proportions as per IS: 9103

to accelerate/ retard setting of concrete, to improve

durability and workability without impairing strength;

including pumping of concrete to site of laying, curing,

carriage for all leads; but excluding the cost of centering,

shuttering, finishing and reinforcement as per direction of

the engineer-in-charge; for the following grades of

Note: Extra cement up to 10% of the minimum specified

cement content in design mix shall be payable separately.

In case the cement content in design mix is more than

110% of the specified minimum cement content, the

contractor shall have discretion to either re-design the

mix or bear the cost of extra cement

5.33.2 All works above plinth level upto floor V level

5.33.2.1 Concrete of M25 grade with minimum cement content of 7.00 Cum 10553.59 73875.10

Total of the Sub-Head - Reinforced Cement Concrete : 888889.86

Sub-Head : Masonry Work

6.1 Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in foundation and plinth in:

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 5.00 Cum 7633.65 38168.24

6.4 Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in superstructure above

plinth level up to floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 270.00 Cum 9746.10 2631446.54

6.13 Half brick masonry with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in superstructure

above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 250.00 Sqm 1202.80 300700.79

6.15 Extra for providing and placing in position 2 Nos 6mm dia. 250.00 Sqm 112.17 28041.86

M.S. bars at every third course of half brick masonry.ird

course of half brick masonry.

Total of the Sub-Head - Masonry W ork : 2998357.42

Sub-Head : Cladding Work

Digitally signed by PRIYA

Description of Item Quantity unit Rate (Rs) Amount(Rs)

8.2 Providing and fixing 18 mm thick gang saw cut, mirror

polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias

and similar locations of required size, approved shade,

colour and texture laid over 20 mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand), joints treated with

white cement, mixed with matching pigment, epoxy touch

ups, including rubbing, curing, moulding and polishing to

edges to give high gloss finish etc. complete at all levels.

8.2.2 Granite stone slab colour black, Cherry/Ruby red

8.2.2.1 Area of slab upto 0.50 sqm 20.00 Sqm 5794.07 115881.38

8.3 Providing edge moulding to 18 mm thick marble stone

counters, Vanities etc., including machine polishing to

edge to give high gloss finish etc. complete as per design

approved by Engineer-in-Charge.

8.4 Extra for fixing marble /granite stone, over and above 25.00 m 608.52 15212.98

corresponding basic item, in facia and drops of width upto

150 mm with epoxy resin based adhesive, including

cleaning etc. complete.

8.5 Extra for providing opening of required size & shape for 33.00 No. 1047.50 34567.59

wash basin/kitchen sink in kitchen platform, vanity

counter and similar location in marble/ Granite/ stone

work, including necessary holes for pillar taps etc.

including moulding, rubbing and polishing of cut edges

8.31 Providing and fixing Ist quality ceramic glazed wall tiles 450.00 Sqm 1357.09 610689.10

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting, risers of steps

and dados, over 12 mm thick bed of cement mortar 1:3 (1

cement : 3 coarse sand) and jointing with grey cement

slurry @ 3.3kg per sqm, including pointing in white

cement mixed with pigment of matching shade complete.

8.32 Designing, fabricating, testing, installing and fixing in 10.00 Sqm 5367.61 53676.08

position Curtain Wall with Aluminium Composite Panel

Cladding, with open grooves for linear as well as

curvilinear portions of the building , for all heights and all

levels etc. including:

Total of the Sub-Head - Cladding W ork : 846433.22

Sub-Head : Wood and P.V.C. Work

9.1 Providing wood work in frames of doors, windows,

clerestory windows and other frames, wrought framed

and fixed in position with hold fast lugs or with dash

fasteners of required dia & length (hold fast lugs or dash

fastener shall be paid for separately).

9.3 Providing wood work in frames of false ceiling, partitions

etc. sawn and fixed in position with necessary stainless

steel screws etc.

9.3.2 Kiln seasoned and chemically treated hollock wood. 3.61 Cum 76352.90 275633.97

9.21 Providing and fixing ISI marked flush door shutters

conforming to IS : 2202 (Part I) non-decorative type, core

of block board construction with frame of 1st class hard

wood and well matched commercial 3 ply veneering with

vertical grains or cross bands and face veneers on both

faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt 155.00 Sqm 2560.85 396932.26

hinges with necessary screws

9.23 Extra for providing lipping with 2nd class teak wood 155.00 Sqm 494.85 76702.25

battens 25 mm minimum depth on all edges of flush door

shutters (over all area of door shutter to be measured).

Digitally signed by PRIYA

Description of Item Quantity unit Rate (Rs) Amount(Rs)

9.40 Providing and fixing wooden moulded beading to door

and window frames with iron screws, plugs and priming

coat on unexposed surface etc. complete :

9.40.1 2nd class teak wood

9.74 Providing and fixing bright finished brass tower bolts

(barrel type) with necessary screws etc. complete :

9.75 Providing and fixing bright finished brass door latch with

necessary screws etc. complete :

9.76 Providing and fixing bright finished brass 100 mm mortice 63.00 No. 914.73 57628.11

latch and lock with 6 levers and a pair of lever handles of

approved quality with necessary screws etc. complete.

9.82 Providing and fixing bright finished brass hanging type 63.00 No. 130.20 8202.73

floor door stopper with necessary screws, etc. complete.

9.100 Providing and fixing aluminium handles ISI marked,

anodised (anodic coating not less than grade AC 10 as per

IS : 1868) transparent or dyed to required colour or shade

with necessary screws etc. complete :

9.118 Providing and fixing to existing door frames.

9.118.1 24 mm thick factory made PVC door shutters made of 20.16 Sqm 3177.99 64068.24

styles and rails of a uPVC hollow section of size 59x24 mm

and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on

both sides. The styles and rails mitred and joint at the

corners by means of M.S. galvanised/plastic brackets of

size 75x220 mm having wall thickness 1.0 mm and

stainless steel screws. The styles of the shutter reinforced

by inserting galvanised M.S. tube of size 20x20 mm and 1

mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’

section, a uPVC hollow section of size 100x24 mm and 2

mm (± 0.2 mm) wall thickness, fixed to the shutter styles

by means of plastic/galvanised M.S. ‘U’ cleats. The shutter

frame filled with a uPVC multi-chambered single panel of

size not less than 620 mm, having over all thickness of 20

mm and 1 mm (± 0.1 mm) wall thickness. The panels filled

vertically and tie bar at two places by inserting

horizontally 6 mm galvanised M.S. rod and fastened with

nuts and washers, complete as per manufacturer ’ s

specification and direction of Engineer-in-charge. (For

W.C. and bathroom door shutter).

9.127 Providing & Fixing decorative high pressure laminated

sheet of plain / wood grain in gloss / matt / suede finish

with high density protective surface layer and reverse side

of adhesive bonding quality conforming to IS : 2046 Type

S, including cost of adhesive of approved quality.

9.140 Providing and fixing plain lining with necessary

screws/nuts & bolts/nails including a coat of approved

primer on one face and fixed on wooden /steel frame

work, complete as per direction of Engineer-in-charge.

(Frame work shall be paid for separately)

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR 250.00 Sqm 1310.74 327685.72

Digitally signed by PRIYA

Description of Item Quantity unit Rate (Rs) Amount(Rs)

9.168 Providing and fixing cuboard shutter with 19 mm thick 20.00 Sqm 3028.15 60562.93

one side decorative and other side balancing lamination

factory pressed BWP grade marine ply as per IS 710 of

approved brand including 2 mm thick PVC edege banding

tape with hot glue by edege bending machine etc. with

auto closing spring loaded hinges (hydraulic type) etc.

complete as per direction of Engineer-in-charge.

(Payment of providing and fixing auto closing hinges shall

be paid separately)

9.169 Providing and fixing 19 mm thick both side balancing 51.00 Sqm 2775.45 141547.87

lamination factory pressed BWP grade marine ply as per

IS 710 of approved brand boxes, shelves, racks, almirah,

cupboard and drawer etc. including necessary nails,

screws etc. complete as per direction of Engineer-in-

9.170 Providing and fixing stainless steel fancy handle of

approved make fixed with SS screws etc. complete as per

direction of Engineer-in-charge.

9.171 Providing and fixing stainless steel soft closing spring 80.00 No. 291.12 23289.73

hinges at 0 degree hinges (hydrarlic type) of approved

make/brand to cupboard shutters with full threaded steel

screws including making necessary recess in board and

finished etc. complete as per direction of Engineer-in-

9.174 Providing and fixing 2 mm thick 16 to 19 mm wide PVC 100.00 m 46.88 4687.91

edge binding tape of approved quality for

cuboard/wardrobe shutters including necessary synthetic

resin hot pressed to edges on binding machine etc.

complete as per direction of Engineer-in-charge.

Total of the Sub-Head - W ood And P.V.C W ork : 2320752.05

Sub-Head : Steel Work

Structural steel work riveted, bolted or welded in built up

sections, trusses and framed work, including cutting,

hoisting, fixing in position and applying a priming coat of

approved steel primer all complete.

10.3 Providing and fixing in position collapsible steel shutters 17.00 Sqm 12243.80 208144.67

with vertical channels 20x10x2 mm and braced with flat

iron diagonals 20x5 mm size, with top and bottom rail of

T-iron 40x40x6 mm, with 40 mm dia steel pulleys,

complete with bolts, nuts, locking arrangement, stoppers,

handles, including applying a priming coat of approved

10.25 Steel work welded in built up sections/ framed work,

including cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer using structural

steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, 100.00 Kg 184.73 18473.38

gates and similar works.

10.27 Providing and fixing carbon steel galvanised (minimum

coating 5 micron) dash fastener of 10 mm dia double

threaded 6.8 grade (yield strength 480 N/mm2), counter

sunk head, comprising of 10 mm dia polyamide PA 6

grade sleeve, including drilling of hole in frame , concrete/

masonry, etc. as per direction of Engineer-in-charge.

Digitally signed by PRIYA

Description of Item Quantity unit Rate (Rs) Amount(Rs)

10.28 Providing and fixing stainless steel ( Grade 304) railing 450.00 Kg 826.70 372014.87

made of Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary

stainless steel nuts and bolts complete, i/c fixing the

railing with necessary accessories & stainless steel dash

fasteners , stainless steel bolts etc., of required size, on

the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-in charge, (for

payment purpose only weight of stainless steel members

shall be considered excluding fixing accessories such as

nuts, bolts, fasteners etc.).

Total of the Sub-Head - Steel W ork : 980944.08

Sub-Head : Flooring

11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand

: 4 graded stone aggregate) finished with a floating coat of

neat cement, including cement slurry, but excluding the

cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate 50.00 Sqm 657.38 32868.91

11.6 Cement plaster skirting up to 30 cm height, with cement

mortar 1:3 (1 cement : 3 coarse sand), finished with a

floating coat of neat cement.

11.24 Extra for pre finished nosing to treads of steps of marble / 20.00 m 770.51 15410.18

11.25 Extra for marble / granite stone flooring in treads of steps 10.00 Sqm 911.68 9116.82

and risers using single length up to 2.00 metre .

11.26 Kota stone slab flooring over 20 mm (average) thick base

laid over and jointed with grey cement slurry mixed with

pigment to match the shade of the slab including rubbing

and polishing complete with base of cement mortar 1 : 4

(1 cement : 4 coarse sand) :

11.41A Providing and laying Vitrified tiles in floor in different sizes

(thickness to be specified by the manufacturer) with

water absorption less than 0.08% and conforming to

IS:15622, of approved brand & manufacturer, in all

colours and shade, laid on 20 mm thick cement mortar

1:4 (1 cement: 4 coarse sand) jointing with grey cement

slurry @3.3 kg/sqm including grouting the joints with

white cement and matching pigments etc. The tiles must

be cut with the zero chipping diamond cutter only . Laying

of tiles will be done with the notch trowel, plier, wedge,

clips of required thickness, leveling system and rubber

mallet for placing the tiles gently and easily.

11.41A.1 Double charge vitrified tile polished finish of size

11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

11.55 Providing and laying flamed finish Granite stone flooring

in required design and patterns, in linear as well as

curvilinear portions of the building all complete as per the

architectural drawings with 18 mm thick stone slab over

20 mm (average) thick base of cement mortar 1:4 (1

cement : 4 coarse sand) laid and jointed with cement

slurry and pointing with white cement slurry admixed

with pigment of matching shade including rubbing, curing

and polishing etc. all complete as specified and as directed

by the Engineer-in-Charge :

11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, 50.00 Sqm 3410.73 170536.25

Elite Brown, Cat Eye or equivalent.

Digitally signed by PRIYA

Description of Item Quantity unit Rate (Rs) Amount(Rs)

11.56 Providing and laying Polished Granite stone flooring in

required design and patterns, in linear as well as

curvilinear portions of the building all complete as per the

architectural drawings with 18 mm thick stone slab over

20 mm (average) thick base of cement mortar 1:4 (1

cement : 4 coarse sand) laid and jointed with cement

slurry and pointing with white cement slurry admixed

with pigment of matching shade including rubbing , curing

and polishing etc. all complete as specified and as directed

by the Engineer-in-Charge.

11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite 22.00 Sqm 4796.34 105519.38

Brown, Cat Eye or equivalent

11.56.2 Polished Granite stone slab of all colour and texture 22.00 Sqm 3286.94 72312.79

except Black, Cherry/Ruby Red

Total of the Sub-Head - Flooring : 2380823.43

Sub-Head : Roofing

12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 stone aggregate 10 mm and

down gauge), including finishing with cement mortar 1:3

(1 cement : 3 fine sand) as per standard design :

12.22 Making khurras 45x45 cm with average minimum 12.00 No. 319.22 3830.60

thickness of5 cm cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate of 20 mm nominal

size) over P.V.C. sheet 1 m x1 m x 400 micron, finished

with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand)

and a coat of neat cement, rounding the edges and

making and finishing the outlet complete.

12.45 Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized

with zinc coating of 120 gms/sqm (both side inclusive) as

per IS : 277 and consisting of angle cleats of size 25 mm

wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at

1200 mm centre to centre, one flange fixed to the ceiling

with dash fastener 12.5 mm dia x 50 mm long with 6 mm

dia bolts, other flange of cleat fixed to the angle hangers

of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at

450 mm centre to centre,

Digitally signed by PRIYA

Description of Item Quantity unit Rate (Rs) Amount(Rs)

shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of

2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm

high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help of

rawl plugs at 450 mm centre, with 25mm long dry wall

screws @ 230 mm interval, including fixing of gypsum

board to ceiling section and perimeter channel with the

help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,

including jointing and finishing to a flush finish of tapered

and square edges of the board with recommended

jointing compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both

sides of joint and two coats of primer suitable for board,

all as per manufacturer's specification and also including

the cost of making openings for light fittings, grills,

diffusers, cutouts made with frame of perimeter channels

suitably fixed, all complete as per drawings, specification

and direction of the Engineer in Charge but excluding the

cost of painting with :

12.45.1 12.5 mm thick tapered edge gypsum plain board 1400.00 Sqm 1451.11 2031557.84

conforming to IS: 2095- (Part I) : 2011 (Board with BIS

certification marks)

Total of the Sub-Head - Roofing : 2071967.87

Sub-Head : Finishing

13.1 12 mm cement plaster of mix :

13.2 15 mm cement plaster on the rough side of single or half

brick wall of mix :

13.11 18 mm cement plaster in two coats under layer 12 mm 220.00 Sqm 555.00 122100.89

thick cement plaster 1:5 (1 cement: 5 coarse sand)

finished with a top layer 6mm thick cement plaster 1:6 (1

cement: 6 fine sand).

13.16 6 mm cement plaster of mix :

13.22 Extra for plastering exterior walls of height more than 10 80.00 Sqm 93.22 7457.85

m from ground level for every additional height of 3 m or

13.80 Providing and applying white cement based putty of 4400.00 Sqm 167.02 734889.39

average thickness 1 mm, of approved brand and

manufacturer, over the plastered wall surface to prepare

the surface even and smooth complete.

13.85 Applying priming coats with primer of approved brand

and manufacture, having low VOC (Volatile Organic

Compound ) content.

13.85.3 With water thinnable cement primer on wall surface 4400.00 Sqm 79.15 348254.21

having VOC content less than 50 grams/litre.

13.83 Wall painting with premium acrylic emulsion paint of

interior grade, having VOC (Volatile Organic Compound )

content less than 50 grams/ litre. of approved brand and

manufacture, including applying additional coats

wherever required to achieve even shade and colour.

13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm 100.00 Sqm 171.89 17189.02

over and including priming coat of exterior primer applied

@ 0.90 litre/10 sqm)

13.47 Finishing walls with Premium Acrylic Smooth exterior

paint with Silicone additives of required shade

13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm 100.00 Sqm 183.13 18312.83

over and including priming coat of exterior primer applied

@ 0.90 litre/10 sqm)

Digitally signed by PRIYA

Description of Item Quantity unit Rate (Rs) Amount(Rs)

13.61 Painting with synthetic enamel paint of approved brand

and manufacture to give an even shade :

13.61.1 Two or more coats on new work. 150.00 Sqm 166.86 25028.97

13.88 Removing white or colour wash by scrapping and sand 1000.00 Sqm 21.14 21138.43

papering and preparing the surface smooth including

necessary repairs to scratches etc. complete

13.116 Polishing in high gloss/matt finish melamine clear polish 25.00 Sqm 3264.25 81606.36

on wood work in required color/wooden shade texture

with following process in the sequence as detailed below:

1. The surface to be polished is rubbed with sand paper

80/120 no. and then with sand paper of 160/180 nos.

2. Applying two coats of sealer with spray gun and

allowing sufficient drying time for 1st coat and 2nd coat is

allowed to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth

of finer grading with water to remove excess sealer layer

and make the surface further smooth after this wet

rubbing, then surface is applied with special grade

melamine fillers to fill all the small and big holes/grooves

etc. Filler coat to be allowed to dry for 4 to 6 hrs on which

again a light wet rubbing is done this surface is further

allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with

spray gun using melamine clear polish and melamine

thinner in required proportion. This 1st coat is allowed to

dry for 24 hrs then this dry surface is again fine wet

rubbed smooth, which is further allowed to dry for 12 hrs.

The final melamine polish is applied with compressor

pressure spray gun using melamine clear polish and

melamine thinner mixed in required proportion complete

as per direction of Engineer-in-Charge. (Finalo coat to be

done in 1 or 2 layers without gap of time.)

14.1 Repairs to plaster of thickness 12 mm to 20 mm in

patches of area 2.5 sq.meters and under, including cutting

the patch in proper shape, raking out joints and preparing

and plastering the surface of the walls complete, including

disposal of rubbish to the dumping ground, all complete

as per direction of Engineer-in-harge.

14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand). 660.00 Sqm 585.88 386682.27

Providing and fixing double scaffolding system (cup lock

type) on the exterior side, up to seven story height made

with 40 mm dia M.S. tube 1.5 m centre to centre,

horizontal & vertical tubes joining with cup & lock system

with M.S. tubes, M.S. tube challies, M.S. clamps and M.S.

staircase system in the scaffolding for working platform

etc. and maintaining it in a serviceable condition for the

required duration as approved and removing it there

after. The scaffolding system shall be stiffened with

14.72 bracings, runners, connection with the building etc 500.00 Sqm 362.03

wherever required for inspectionof work at required

locations with essential safety features for the workmen

etc. complete as per directions and approval of Engineer-

in-charge. The elevational area of the scaffolding shall be

measured for payment purpose. The payment shall be

made once irrespective of duration of scaffolding.Note: -

This item to be used for maintenance work judicially,

necessary deduction for scaffolding in the existing item to

Digitally signed by PRIYA

Description of Item Quantity unit Rate (Rs) Amount(Rs)

Providing & fixing White vitreous china water closet

squatting pan (Indian type) along with "S" or "P" trap

including dismantling of old WC seat and "S" or "P" trap at

14.80 site complete with all operations including all necessary

materials, labour and disposal of dismantled material i/c

malba, all complete as per the direction of Engineer-in

14.80.1 Long pattern W.C Pan of size 580x440 mm 5.00 No. 3747.87 18739.35

14.80.2 Orissa pattern W.C Pan of size 580x440 mm 2.00 No. 4793.61 9587.21

Dismantling W.C. Pan of all sizes including disposal of 2152.91

14.82 dismantled materials i/c malba all complete as per 15.00 No. 143.53

directions of Engineer-in- Charge.

Taking out existing wooden door shutter, repair by

cutting, painting etc. and refixing of repaired door

14.85 shutters to existing door frames, including replacement of 10.00 No. 459.27

hinges with screws, etc. as required, all complete as per

the direction of the Engineer-in-charge.

15.2 Demolishing cement concrete manually/ by mechanical

means including disposal of material within 50 metres

lead as per direction of Engineer - in - charge.

15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent 5.00 Cum 2605.38 13026.89

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent 5.00 Cum 1609.30 8046.52

15.3 Demolishing R.C.C. work manually/ by mechanical means 5.00 Cum 3800.90 19004.51

including stacking of steel bars and disposal of

unserviceable material within 50 metres lead as per

direction of Engineer - in- charge.

15.7 Demolishing brick work manually/ by mechanical means

including stacking of serviceable material and disposal of

unserviceable material within 50 metres lead as per

direction of Engineer-in-charge..

15.7.4 In cement mortar 100.00 Cum 2205.03 220503.21

15.12 Dismantling doors, windows and clerestory windows

(steel or wood) shutter including chowkhats, architrave,

holdfasts etc. complete and stacking within 50 metres

15.12.1 Of area 3 sq. metres and below 55.00 No. 393.01 21615.78

Dismantling steel work in built up sections in angles, tees, 302359.75

flats and channels including all gusset plates, bolts, nuts,

cutting rivets, welding etc. including dismembering and

stacking within 50 metres lead.

15.23 Dismantling tile work in walls, floors and roofs laid in

cement mortar including stacking material within 50

15.23.1 For thickness of tiles 10 mm to 25 mm 300 Sqm 78.56002 23568.01

15.45 Dismantling C.I. pipes including excavation and refilling

trenches after taking out the pipes, manually/ by

mechanical means breaking lead caulked joints, melting of

lead and making into blocks including stacking of pipes &

lead at site within 50 metre lead as per direction of

Engineer-in-charge:

15.56 Dismantling old plaster or skirting raking out joints and 1000.00 Sqm 58.49 58491.90

cleaning the surface for plaster including disposal of

rubbish to the dumping ground within 50 metres lead.

15.57 Dismantling aluminium/ Gypsum partitions, doors, 500.00 Sqm 60.31 30155.70

windows, fixed glazing and false ceiling including disposal

of unserviceable material and stacking of serviceable

material with in 50 meters lead as directed by Engineer-

Digitally signed by PRIYA

Description of Item Quantity unit Rate (Rs) Amount(Rs)

15.60 Disposal of building rubbish / malba / similar 200.00 Cum 282.51 56501.14

unserviceable, dismantled or waste materials by

mechanical means, including loading, transporting,

unloading to approved municipal dumping ground or as

approved by Engineer-in-charge, beyond 50 m initial lead,

for all leads including all lifts involved.

Total of the Sub-Head - Finishing : 4213540.18

Sub-Head : Aluminium Work

21.1 Providing and fixing aluminium work for doors, windows,

ventilators and partitions with extruded built up standard

tubular sections/appropriate Z sections and other sections

of approved make conforming to IS: 733 and IS: 1285,

fixing with dash fasteners of required dia and size,

including necessary filling up the gaps at junctions, i.e. at

top, bottom and sides with required EPDM

rubber/neoprene gasket etc. Aluminium sections shall be

smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle,

Aluminium snap beading for glazing / paneling, C.P. brass/

stainless steel screws, all complete as per architectural

drawings and the directions of Engineer-in-charge.

(Glazing, paneling and dash fasteners to be paid for

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder 600.00 Kg 568.22 340933.36

coating 50 micron)

21.1.2 For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision

for fixing of fittings wherever required including the cost

of EPDM rubber / neoprene gasket required (Fittings shall

be paid for separately).

21.1.2.2 Powder coated aluminium (minimum thickness of powder 600.00 Kg 679.05 407431.10

coating 50 micron)

21.3 Providing and fixing glazing in aluminium door, window,

ventilator shutters and partitions etc. with EPDM rubber /

neoprene gasket etc. complete as per the architectural

drawings and the directions of engineer-in-charge . (Cost

of aluminium snap beading shall be paid in basic item):

21.3.3 With float glass panes of 8 mm thickness (weight not less 300.00 Sqm 1803.88 541165.09

than 20 kg/sqm)

21.8 Filling the gap in between aluminium frame & adjacent

RCC/ Brick/ Stone work by providing weather silicon

sealant over backer rod of approved quality as per

architectural drawings and direction of Engineer-in-charge

21.8.1 Upto 5mm depth and 5 mm width 500.00 m 103.55 51775.76

21.11 Providing and fixing stainless steel (SS 304 grade)

adjustable friction windows stays of approved quality with

necessary stainless steel screws etc. to the side hung

windows as per direction of Engineer-in-charge complete.

21.15 Providing and fixing aluminium casement windows

fastener of required length for aluminium windows with

necessary screws etc. complete.

21.15.2 Powder coated minimum thickness 50 micron aluminium. 102.00 No. 104.84 10693.26

Total of the Sub-Head - Aluminium W ork : 1389586.01

Sub-Head : Water Proofing

22.3 Providing and laying water proofing treatment to vertical

and horizontal surfaces of depressed portions of W.C.,

kitchen and the like consisting of:

Digitally signed by PRIYA

Description of Item Quantity unit Rate (Rs) Amount(Rs)

(i) Ist course of applying cement slurry @ 4.4 kg/sqm

mixed with water proofing compound conforming to IS

2645 in recommended proportions including rounding off

junction of vertical and horizontal surface.

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3

coarse sand) mixed with water proofing compound in

recommended proportion including rounding off junction

of vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen

applied hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps 150.00 Sqm 823.70 123555.43

at joints of PVC sheet should be 100 mm wide and pasted

to each other with bitumen @ 1.7 kg/sqm).

Total of the Sub-Head - W ater Proofing : 123555.43

Sub-Head : New Technologies and Materials

26.28 Chipping of unsound/weak concrete material from slabs,

beams, columns etc. with manual Chisel and/ or by

standard power driven percussion type or of approved

make including tapering of all edges, making square

shoulders of cavities including cleaning the exposed

concrete surface and reinforcement with wire brushes

etc. and disposal of debris for all lead and lifts all

complete as per direction of Engineer-In-Charge

26.28.1 75 mm average thickness 150.00 Sqm 404.57 60686.01

26.29 Cleaning of reinforcement from rust from the reinforcing

bars to give it a total rust free steel surface by using

alkaline chemical rust remover of approved make with

paint brush and removing loose particles after 24 hours of

its application with wire brush and thoroughly washing

with water and allowing it to dry, all complete as per

direction of Engineer-In-Charge.

26.29.1 Bars upto 12 mm diameter 300.00 m 8.83 2648.99

26.29.2 Bars above 12 mm diameter 200.00 m 17.61 3521.29

26.31.2 Epoxy bonding adhesive having coverage 2.20 sqm/kg of 75.00 Sqm 305.25 22893.72

Total of the Sub-Head - New Technologies And Materials : 89750.01

15 Sub-Head : Non Schedule Items

MR Providing & fixing Vista DS Opaque 3ply PVC+1 Ply fiber

glass blackout fabric series or equivalent in 100mm

vertical blinds having Head Rail: Head rail is of 25mm high

and 47 mm wide Extruded High strength aluminum alloy

section with Average wall thickness of minimum 0.9mm.

The section is anodized for smooth operations and has

the provision of Fabric valance matching with louvers

fabric. End Control Unit (Reduction Gear Box): End control

unit state of art reduction gear box having the reduction

ratio of 3.5:1 for a very smooth operation of the blind.

This unit Consists of a planetary gear in the outer housing,

four small transmission gears fitted in the middle

assembly and an end receiving gear attached to central

sprocket unit. Tilt Rod: It is made of extruded aluminum

having three keyways. The tilt rod is fixed in the end

control unit and drives the carrier gear mechanism to

rotate the louvers. The average diameter is 5.8mm to

achieve minimum torsion deflection Tilter Chain: This is

made of 4.5 mm plastic beads molded on 1.5 mm thick

polyester cord. The Pitch of the beads is 6mm. The chain

drives the procket fixed in the end control unit to rotate

the louvers by 180 degrees.

Digitally signed by PRIYA

Description of Item Quantity unit Rate (Rs) Amount(Rs)

The pitch of the chain corresponds to the sprocket in

perfect match for trouble free Operation. It is provided in

white color. Carrier (Runner): This is a molded component

having anti friction additive. It consists of polymer

Housing with wheels mounted on sides and has a gear and

worm mechanism with vertical worm fixed With a

tongued poly carbonate stem to hold the louvers. The

worm and gear mechanism are driven by Tilt rod fixed to

end control unit to rotate louvers by 180 degrees. The

mounted wheels on sides of Casing move on rails of head

rail section for resistance free stacking of louvers Spacer:

This is made of molded High Polymer ABS, having anti

friction additive. It maintains proper Spacing of the

runners and ensures overlapping of louvers for perfect

light control. It is available in 100 mm size. Installation

Bracket: This is made of galvanized steel “ L ” bracket of

thickness 3mm which is fitted with Pressure clip made of

spring steel to hold the head-rail. Cord Weight: This is

made of ABS material hollow casing with a steel weight

Cord: It is 2.2mm in diameter, Nylon braided high strength 220.00 Sqm 4222.00 928840.00

cord having maximum abrasion resistance & Minimum

elongation. Bottom Mechanism (Weight and Chain): The

purpose of this is to keep the louver straight & prevent

them from swaying.

•The bottom weight is made of FILLED PP and is having

provision for fixing bottom chain. Available in 100 mm.

• Bottom weight is fixed with U- type of clips attached

at equal distance on Polyester cord having 0.8mm dia

with molded plastic beads on it.

MR Providing and fixing machine cut, mirror/ eggshell

polished, Granite stone work for wall lining (veneer work),

including dado, skirting risers of steps etc. in required

design and pattern wherever required stone of different

finished surface texture, on 12mm average thick cement

mortar 1:3 (1 cement : 3 coarse sand) laid and joined with

white cement slurry @ 3.3kg/sqm including pointing with

white cement slurry admixed with pigment of matching

shade, including rubbing curing, polishing etc. All

complete as per Architectural designs and as direction by

Engineer-in-charge.

Area of slab over 0.50 sqm

18mm thick Granite of all colour except black, cherry/ruby 11.94 Sqm 7121.00 85024.74

18mm thick Granite of colour black, cherry/ruby red 11.94 Sqm 8592.00 102588.48

Digitally signed by PRIYA

Description of Item Quantity unit Rate (Rs) Amount(Rs)

M.R.2 Constructing Brick masonry percolation pit 3m dia and 5m 1.00 Each 541195.00 541195.00

deep with bricks of class designation 7.5 in cement mortar

1:6, base concrete 1:4:8 below the brick wall, including

cost of necessary excavation in any type of soil, back

filling as required in 20cm thick layers, dewatering if any,

shuttering and shoring and disposal of surplus excavated

material within 2 nos. 300mm dia borings to a depth of 9

metre (to be measured from the bottom of the

percolation pit), provisioning and fixing 160mm O.D. PVC

pipes, tested to 6kg/sqcm, in each bore and upto the

height of 300mm above the RCC top slab. The PVC pipe

shall be slotted except 3.0 metres at the top and 3.0

metres below from the bottom of the percolation pit,

which shall be blind. Top of the PVC pipe shall be covered

with PVC Socket & plug. Each bore around the PVC pipe

shall be filled with pea gravels. The percolation pit shall be

filled with river stone/pebbles as shown in drawing. The

top slab shall be 150mm thick with RCC M20 including

nominal reinforcement and 2 nos. of 560mm internal dia

SFRC manhole covers with frames conforming to

Total of the 1657648.22

Digitally signed by PRIYA

Name of Project: D-WING PROJECT BUILDING , BOKARO STEEL PLANT

1 SUBHEAD-I(Sanitary Fixtures & CP Brass Fittings) 3,18,826.05 32,326.00

2 SUBHEAD II(Soil, Waste, Vent & Rain Water Pipes) - 11,70,874.45

3 SUBHEAD III(Water Supply System(Internal)) 4,48,407.93 94,624.50

4 SUBHEAD IV(External Sewerage & Storm Water Drainage) 3,51,153.76 96,440.00

5 SUBHEAD V(External Water Supply) 42,839.45 -

GRAND TOTAL 25,55,492.15

GRAND TOTAL 25,55,492.15

Digitally signed by PRIYA

Name of Project: D-WING PROJECT BUILDING , BOKARO STEEL PLANT

PLUMBING WORKS DETAILED ESTIMATE

S.I DSR MR MR DSR

Description of Item Unit QUANTITY

No Item No Item No Rate Amount Rate Amount

SUBHEAD-I(Sanitary Fixtures & CP Brass Fittings)

1 17.3 MR 1 Providing and fixing white vitreous china pedestal type water

closet (European type) with seat and lid, 10 litre low level

white vitreous china flushing cistern & C.P. flush bend with

fittings & C.I. brackets, 40 mm flush bend, overflow

arrangement with specials of standard make and mosquito

proof coupling of approved municipal design complete,

including painting of fittings and brackets, cutting and making

good the walls and floors wherever required :

1.1 17.3.2 MR 1.1 W.C. pan with ISI marked black solid plastic seat and lid Each 14 8,427.86 117990.0861

2 17.7 MR 2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. -

brass pillar taps, 32 mm C.P. brass waste of standard pattern,

including painting of fittings and brackets, cutting and making

good the walls wherever require:

2.1 17.7.2 MR 2.1 White Vitreous China Wash basin size 630x450 mm with a Each 17 2,382.86 40508.66089

single 15 mm C.P. brass pillar tap

3 17.22A MR 3 Providing and fixing CP Brass 32 mm size Bottle Trap of Each 17 1,107.55 18828.28948

approved quality & make and as per the direction of Engineer-

4 17.10 MR 4 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen -

sink as per IS:13983 with C.I. brackets and stainless steel plug

40 mm, including painting of fittings and brackets, cutting and

making good the walls wherever required:

4.1 17.10.1 MR 4.1 Kitchen sink with drain board -

5 MR 5 Fixing of 15 mm C.P brass wall mounted mixing fittings Each

swinging spout for sink complete including cutting and 1 5388.00 5388 -

making good the walls where required. (Pantry, Kitchen,

Coffee-Break etc.)

6 17.4 MR 6 Providing and fixing white vitreous china flat back or wall -

corner type lipped front urinal basin of 430x260x350 mm and

340x410x265 mm sizes respectively with automatic flushing

cistern with standard flush pipe and C.P. brass spreaders with

brass unions and G.I clamps complete, including painting of

fittings and brackets, cutting and making good the walls and

floors wherever required :

6.1 17.4.1 MR 6.1 One urinal basin with 5 litre white P.V.C. automatic flushing Each 10 6,698.74 66987.40125

7 MR 7 Providing and fixing in postion storage type automatic electric -

water heater pressure type thermostatically controlled, single

phase wall mounted of approved make (to the approval of

Engineer-in-charge) with thermostats, inner container of

stainless steel, Inner glass lining with B-Rating minimum 3

stars complete with 1 Mtr. three core flexible cord with plug,

non return valve and pressure release valve complete

including fixing and testing complete in all respect.

Vertical type -

7.1 MR 7.1 15 litre capacity water heater Each 1 13470.00 13470 -

8 MR 8 Providing & fixing in position Water Cooler without Stablizer -

of approved make (to the approval of Engineer-in-charge )

including carriage complete in all respect.

8.1 MR 8.1 Each 0

Water Cooler Full Steel Body 40 ltr Capacity without Stablizer

9 17.16A MR 9 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube Each 14 373.70 5231.73343

upto 1 metre long with S.S. triangular plate to Eureopean type

W.C. of quality and make as approved by Engineer - in -

10 18.53 MR 10 Providing and fixing C.P. brass angle valve for basin mixer and Each 45 614.67 27660.29805

geyser points of approved quality conforming to IS:8931

11 17.28 MR 11 Providing and fixing P.V.C. waste pipe for sink or wash basin -

Digitally signed by PRIYA

11.1 17.28.2 MR 11.1 Flexible pipe -

12 MR 12 Providing & Fixing in position C.P. Brass coat hook of -

approved make (to the approval of Engineer-in-charge ) fixed

into wall with C.P. brass screws and rawl plugs etc. complete in

12.1 MR 12.1 C.P.Brass coat hook Each 14 962.00 13468 -

13 17.31 MR 13 Providing and fixing 600x900 mm beveled edge mirror of Each 17 1,720.99 29256.81105

superior glass (of approved quality) complete with 6 mm thick

hard board ground fixed to wooden cleats with C.P. brass

screws and washers complete.

14 17.72 MR 14 Providing and fixing PTMT towel ring trapezoidal shape 215 Each 7 248.26 1737.792595

mm long, 200 mm wide with minimum distances of 37 mm

from wall face with concealed fittings arrangement of

approved quality and colour, weighing not less than 88 gms.

15 17.71 MR 15 Providing and fixing PTMT liquid soap container 109 mm Each 17 180.19 3063.145085

wide, 125 mm high and 112 mm distance from wall of

standard shape with bracket of the same materials with snap

fittings of approved quality and colour, weighing not less than

SUBHEAD II(Soil, Waste, Vent & Rain Water Pipes) -

16 MR 1 Supply, installation , testing commissioning of PP Mineral

filled low noise Soil & Waste system as per EN 12056,

with density 1.9 g/cm3. PP mineral(Astolan) filled Low

noise system should has a fire classification DIN 4102-

B2/EN13501 . Product should have a chemical resistance

of pH 2-12 and is a complete sound protection system

according to DIN 4109. including with push fit rubber ring

sockets all necessary fittings and specials such as Bends,

junctions, offsets & vent cowl. Fixing at wall/ceiling level

supported by rubber line bracket & hangers etc. duly epoxy

coated. Cutting, chases/holes in floors / walls /

slab.Compliant with LABC. Weight mass per unit area of

DN100MM should not be less than 110.07kg/m3. sound

levels of not more than 15dBA as per EN 14366 at a flow

rate of 4 l/s.including all core cut ,chases ,cutting making

holes in all wall and floor as required complete in all

17 MR 2 Providing fixing, testing and commissioning in position Solfit

SWR uPVC PIPE TYPE-B pipe comforming to IS:13592

including all fittings such as bends, junctions, inspection doors,

offests, cowl, access pieces/clean out plugs, clamps /supports/

hangers etc. jointing with PVC Adhesive joints including cutting

holes in walls, core cutting in slabs and making good the same.

All complete as per specification and direction of E/l.(For

rainwater piping) -

18 MR 3 Providing Fixing straight /offset type single body push fit type WC

pan connector with factory supplied spring loaded seal

guard with integral single mould sealing fins made of

flexible EVA body, including bush/adaptor as supplied with

the pan connector (if required). Each 14 800.00 11200 -

19 MR 4 Providing and fixing floor drain (FD) with 50mm/40mm outlet

and one 40mm inlet for waste, with SS grating (adjustable

height), having 50mm water seal and in-built NRV

20 MR 5 Providing and fixing PP/UPVC trap of self cleansing design with

screwed down or hinged grating with or without vent arm complete,

including cost of cutting and making good the walls and floors :

20.1 MR 5.1 100 mm inlet and 100 mm outlet -

20.1.1 MR 5.1.1 Sand cast iron S&S as per IS: 3989 Each 20 3986.29 79725.89977 -

21 MR 6 Providing and fixing PP/UPVC grating with Cockroach proof

strainer of approved design including setting in floor with

cement motor to match with floor finish as per architect

requirement suitable for waster and FT. -

Digitally signed by PRIYA

22 MR 7 Providing and fixing PP/UPVC brass grating with frame of

approved design including setting in floor with cement motor

to match with floor finish as per architect requirement.

23 MR 8 Providing and fixing PP/UPVC extention piece for 100 mm dia

floor trap formed out of main pipe with multiple side inlets,

suitable for various dia pipes including all fixtures as required

complete as per drawing approved sample and direction of

engineer in charge. Each 20 2508.45 50168.98083 -

24 MR 9 Providing and fixing cast PP floor clean out plug with

suitable insert keys for opening, male threaded joint with

threaded socket drip seal to soil / waste pipe as required

complete as per drawing approved sample and direction of

engineer in charge. Each 8 1769.53 14156.20855 -

25 MR 10 Providing and fixing rainwater khurra epoxy coated cast

iron body outlet with flat grate on balconies & terrace as

required complete as per drawing approved sample and

direction of engineer in charge. -

SUBHEAD III(Water Supply System(Internal)) -

26 18.8 MR 1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings and fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in

Concealed work, including cutting chases and making good

the walls etc(inside building) -

26.5 MR 1.5 50 mm nominal dia Pipes Mtr 10 1074.25 10742.5 -

27 18.7 MR 2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply and

all CPVC plain & brass threaded fittings, including fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and testing

of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall(vertical & terrace area) -

27.2 18.7.3 MR 1.2 25 mm nominal dia Pipes Mtr 20 429.78 8595.5793

27.5 MR 1.5 65 mm nominal dia Pipes Mtr 20 1925.1 38502 -

27.6 MR 1.6 80 mm nominal dia Pipes Mtr 10 2490.9 24909 -

28 18.18 MR 3 Providing and fixing ball valve (brass) of approved quality, -

High or low pressure, with plastic floats complete :

28.1 18.18.1 MR 3.1 15 mm nominal dia Pipes Each 10 435.45 4354.52

28.2 18.18.2 MR 3.2 20 mm nominal dia Pipes Each 7 495.01 3465.10

28.3 18.18.3 MR 3.3 25 mm nominal dia Pipes Each 5 496.67 2483.36

29 18.17 MR 4 Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end) : -

30 MR 5 Providing and fixing Butter fly valve with nitrile seat and

stainless steel stem with lever operation and cast iron body

in powder coated finish, suitable for test pressure of

10Kg/sq.mm) with flanges, gaskets and necessary pad

locking arrangement complete required. -

Digitally signed by PRIYA

31 MR 6 Providing and fixing thermal insulation in cold/hot water -

pipes a Polyolefin foam of closed cell structure having

thermal conductivity of 0.036 W/M.K at an average

temperature of 30oC. complete with 24 gauge aluminium

sheet/cladding.

31.1 MR 6.1 15 mm dia pipe RM 0 45 -

31.9 Providing and placing on terrace (at all floor levels) LTR 20000 11.77

polyethylene water storage tank, IS : 12701 marked, with

18.48 cover and suitable locking arrangement and making necessary

holes for inlet, outlet and overflow pipes but without fittings

and the base support for tank. 235466.00

Digitally signed by PRIYA

SUBHEAD IV(External Sewerage & Storm Water Drainage) -

32 MR 1 Excavation in trenches with straight or open cutting in streets,

lanes or in open area with 3D/JCB or excavator including

manually dressing bed, trimming sides and side slopes for

sewers and manholes to full depths as shown in

drawings,including, dressing to correct sections and

dewatering, provision for diversion for traffic, protection of

existing services i.e. telephone cables, electric lines, water

supply lines and gas lines etc. night signals, profiles, pegs, sight

rails, boning rods, watching, etc., fixing and maintenance of

caution boards, fencing, refilling trenches, watering, ramming

and restoration of surface to original level and removal of

surplus spoil from the site of works, upto one chain (15m)

complete in all respects

32.1 MR 1.1 Depth not exceeding 3 m. BGL -

All kinds of soil except rocky Mtr 200 224 44800 -

33 MR 2 Excavation of trenches in a Streets, Lanes or in Open Area for

Storm Sewers and Manholes to Full Depths as Shown in

Drawings,excluding Shoring, Timbering of Poling Board Frame

System Type, dressing to correct sections and dewatering,

provision for diversion for traffic, protection of existing

services i.e. telephone cables ,electric lines, water supply lines

and gas lines.night signals, profiles, Pegs, Sight rails, boning

rods, crossing over trenches for access to the houses,

watching, fencing etc., fixing and maintenance of caution

boards, refilling trenches, watering of refill in 15 cm layers,

ramming and restoration of surface to original conditions and

removal of Surplus Spoil from the Site of Works, for all Works

other than connections to Ventilating Shafts upto a Lead of 15

33.1 MR 2.1 For depth not exceeding 2 m. below Ground level -

All classes of soil except rocky Mtr 110 224 24640 -

34 19.6 MR 3 Providing and laying non-pressure NP2 class (light duty) R.C.C.

pipes with collars jointed with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand) including testing of joints

etc. complete : -

Providing, laying and jointing glazed stoneware pipes class SP-1

with stiff mixture of cement mortar in the proportion of 1:1 (1

cement : 1 fine sand) including testing of joints etc. complete : -

36 19.7 MR 5 Constructing brick masonry manhole in cement mortar 1:4 ( 1

cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1

cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20

mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4

coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal

size), inside plastering 12 mm thick with cement mortar 1:3 (1

cement : 3 coarse sand) finished with floating coat of neat cement

and making channels in cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size)

finished with a floating coat of neat cement complete as per

standard design :

36.1 19.7.1 MR 5.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with

frame (light duty) 455x610 mm internal dimensions, total weight of

cover and frame to be not less than 38 kg (weight of cover 23 kg

and weight of frame 15 kg) : -

36.2 19.7.1.2 MR 5.1.2 With Sewer bricks conforming to IS : 4885 Each 12 13,605.44 163265.2745

37 19.4 MR 6 Providing and fixing square-mouth S.W. gully trap class SP-1

complete with C.I. grating brick masonry chamber with water tight

C.I. cover with frame of 300 x 300 mm size (inside) the weight of

cover to be not less than 4.50 kg and frame to be not less than

2.70 kg as per standard design: -

37.2 19.4.1.1 MR 6.1.1 With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 Each 6 2,898.00 17387.98677

38 MR 7 Constructing catch basin 45x45 cm with bricks in cement

mortar 1:4 (1 cement : 4 coarse sand) including 500x450

mm pre-cast R.C.C. horizontal grating with frame complete

as per standard design : -

38.2 MR 7.1 With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 Each 6 4500 27000 -

Digitally signed by PRIYA

Providing orange colour safety foot rest of minimum 6 mm thick

plastic encapsulated as per IS : 10910, on 12 mm dia steel bar

conforming to IS: 1786, having minimum cross section as 23

mmx25 mm and over all minimum length 263 mm and width as

165 mm with minimum 112 mm space between protruded legs

having 2 mm tread on top surface by ribbing or chequering

besides necessary and adequate anchoring projections on tail

length on 138 mm as per standard drawing and suitable to with

stand the bend test and chemical resistance test as per

specifications and having manufacture’s permanent identification

mark to be visible even after fixing, including fixing in manholes

with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3

coarse sand : 6 graded stone aggregate 20 mm nominal size)

complete as per design. Each 36 592.63 21334.50396

40 19.21 MR 9 Making connection of drain or sewer line with existing

manhole including breaking into and making good the walls, floors

with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) cement plastered on

both sides with cement mortar 1:3 (1 cement : 3 coarse sand),

finished with a floating coat of neat cement and making necessary

channels for the drain etc. complete :

40.1 19.21.1 MR 9.1 For pipes 100 to 250 mm diameter Each 2 867.42 1734.84927

SUBHEAD V(External Water Supply) -

41 18.12 MR 1 Providing and fixing G.I. pipes complete with G.I. fittings including

trenching and refilling etc. -

External work -

42 18.40 MR 2 Painting G.I. pipes and fittings with two coats of anti-corrosive

bitumastic paint of approved quality : - 0

43 18.14 MR 3 Fixing water meter and stop cock in G.I. pipe line including

cutting and threading the pipe and making long screws etc.

complete (cost of water meter and stop cock to be paid

separately). Each 1 869.40 869.40469

44 18.37 MR 3 Constructing masonry Chamber 60x45x50 cm inside, in brick

work in cement mortar 1:4 (1 cement : 4 coarse sand) for water

meter complete with C.I. double flap surface box 400x200x200

mm (inside) with locking arrangement and RCC top slab 1:1.5:3

mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20

mm nominal size), including necessary excavation, foundation

concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone

aggregate 40 mm nominal size) and inside plastering with cement

mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a

floating coat of neat cement complete as per standard design :

Digitally signed by PRIYA

ENGINEERING CONSULTANCY SERVICES

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Cost Estimate for Renovation and conversion of D Block (Ground Floor) of Administrative Building

into Projects office building

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

A SCHEDULE ITEMS

WIRING AND SUB MAINS

Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed heavy

1 1.3.3 class Steel conduit, with modular switch, modular plate, Point 360 2,042.44 735277.55

suitable GI box and earthing the point with 1.5 sq.mm.

FRLS PVC insulated copper conductor single core cable

etc as required.a) Group C

Wiring for twin control light point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable in

surface / recessed Steel conduit, 2 way modular switch,

modular plate, suitable GI box and earthing the point with

1.5 sq.mm. FRLS PVC insulated copper conductor single

core cable etc as required

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

3 1.5 recessed Steel conduit alongwith 1 No 4 sq. mm FRLS Point 1120 479.34 536856.67

PVC insulated copper conductor single core cable for loop

earthing as required

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

4 1.6 recessed Steel conduit alongwith 2 Nos 4 sq. mm FRLS metre 10 732.84 7328.42

PVC insulated copper conductor single core cable for loop

earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with

the following sizes of FRLS PVC insulated copper

conductor, single core cable in surface/ recessed Steel

conduit as required.

b 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire metre 1000 473.80 473801.25

b 1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire metre 969 652.03 631810.77

d 1.7.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire metre 5 785.98 3929.89

e 1.7.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire metre 120 1,022.88 122745.52

f 1.7.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire metre 60 1,290.78 77446.58

g 1.7.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire metre 50 1,821.04 91051.76

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess, including

5 1.31 providing and fixing 3 pin 5/6 amps modular socket outlet Each 56 528.04 29570.51

and 5/6 amps modular switch, connection etc. as required.

(For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess, including

6 1.32 providing and fixing 6 pin 15/16 amps modular socket Each 42 648.71 27245.79

outlet and 15/16 amps modular switch, connection etc. as

Supplying and fixing of following modular switch/ socket

7 outlet on the existing Modular plate & switch including -

connection but excluding modular plate etc. as required.

b 1.24.4 3 pin 5/6 amp socket outlet Each 56 135.06 7563.11

d 1.24.5 6 pin 15/16 amp socket outlet Each 42 218.08 9159.42

Supplying and fixing following size/ modules, GI box

Boxes alongwith modular base & cover plate for modular

switches in recess etc as required.

a 1.27.1 1 or 2 Module (75mmX75mm) Each 2 329.89 659.78

ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

2.18 Supplying and fixing 20 amps, 240 volts, SPN industrial

type, socket outlet, with 2 pole and earth, metal

enclosed plug top along with 20 amps "C" curve, SP,

9 MCB, in sheet steel enclosure, on surface or in recess, Each 1 1,794.47 1794.47

with chained metal cover for the socket out let and

complete with connections, testing and commissioning

etc. as required.

1.25 Supplying and fixing stepped fan regulator on the existing

10 modular plate switch box including connections but Nos. 15 408.49 6127.31

excluding modular plate etc. as required.

Supplying and fixing of modular Blanking plate on the

11 1.26 existing modular plate & switch box excluding modular Each 100 44.28 4428.05

plate etc. as reqd.

TELEPHONE / TV -

1.24 Supply and fixing following modular switch/socket on the

12 existing modular plate and cover plate & switch box -

including connections but excluding modular plate etc. as

a 1.24.6 Telephone socket outlet. (RJ - 11) Each 49 163.84 8028.05

b 1.24.7 TV antenna socket outlet Each 1 163.84 163.84

1.27 Supplying and fixing following size/modules, GI box along

13 with modular base and cover plate for modular switches in -

recess etc as required.

1.18 Supplying and drawing following pair, 0.5 sq.mm FR PVC

15 insulated copper conductor, unarmoured telephone cable -

in the existing surface / recessed steel / PVC conduit as

1.27.1 Supply, laying, testing and commissioning of the following

16 co-axial PVC insulated conductor cable in existing -

surface / recessed conduit etc. and including making

terminal joints, complete as required.

1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in

17 the existing surface/ recessed Steel/ PVC conduit/ -

raceway as required.

ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supplying and fixing of following sizes of steel conduit

along with accessories in surface/recess including painting

in case of surface conduit, or cutting the wall and making

good the same in case of recessed conduit as required.

Supplying and fixing of following sizes of heavy class PVC

conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of

recessed conduit as required.

DISTRIBUTION BOARDS -

Supplying and fixing following way, Horizontal type three

pole and neutral, sheet steel, MCB distribution board, 415

volts, on surface/recess, complete with tinned copper bus

bar, neutral bus bar, interconnections, powder painted

including earthing etc. as required. (But without

MCB/RCCB/Isolator)

a 2.4.1 4 way (4 + 12), Double door, Horizontal Each 1 4,528.79 4528.79

b 2.4.2 6 way (4 + 18) ,Double door, Horizontal Each 8 5,506.28 44050.23

c 2.4.3 8 way (4 + 24), Double door, Horizontal Each 1 6,605.54 6605.54

Supplying and fixing following rating, four pole, 415 volts,

21 2.13 isolator in the existing MCB DB complete with -

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single

phase and neutral), 240 volts, residual current circuit

22 2.14 breaker (RCCB), having a sensitivity current upto 30 -

milliamperes in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA,

"C" curve, miniature circuit breaker suitable for inductive

23 2.10 load of following poles in the existing MCB DB complete -

with connections, testing and commissioning etc. as

a 2.10.1 Single pole Each 120 283.40 34007.42

Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required.

ERRECTION OF FAN & FIXTURE -

Installation ,Testing, Commissioning of wall bracket fittings

of all sizes and shapes including LED lamps per fitting,

complete with all accessories including connections etc.

Installation, testing and commissioning of pre-wired,

fluorescent fitting / compact fluorescent fitting / LED

Fittings of all types, with all accessories and tube

etc. directly on ceiling/ wall, including connection with

1.5 sq. mm FR PVC insulated, copper conductor, single

core cable and earthing etc. as required.

ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supply, Installation, Testing and Commissioning of 1200

mm sweep, BEE 5 star rated, ceiling fan with Brush Less

Direct Current (BLDC) Motor, class of insulation: B, 3 nos.

blades, 30 cm long down rod, 2 nos. canopies, shackle kit,

safety rope, copper winding, Power Factor

not less than 0.9, Service Value (CM/M/W) minimum 6.00,

27 19.1 Air delivery minimum 210 Cum/Min , 350 RPM (tolerance each 5 3,022.14 15110.72

as per IS : 374-2019), THD less than 10%, remote or

electronic regulator unit for speed control and all

remaining accessories including safety pin, nut bolts,

washers, temperature rise=75 degree C (max.), insulation

resistance more than 2 mega ohm, suitable for 230 V, 50

Hz, single phase AC Supply, earthing etc. complete as

Installation of exhaust fan in the existing opening,

28 1.5 including making good the damage, connection, -

testing, commissioning etc. as required.

Extra for fixing the louvers/ shutters complete with frame

for a exhaust fan of all sizes.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia

including accessories, and providing masonry enclosure

30 5.2 with cover plate having locking arrangement and watering Nos. 2 7,588.57 15177.14

pipe etc. with charcoal/coke and salt as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm

including accessories, and providing masonry enclosure

cover plate having locking arrangement and watering pipe

2.7 metre long etc. with charcoal/ coke and salt as

Earthing with copper earth plate 600 mm X 600 mm X 3

thick including accessories, and providing masonry

with cover plate having locking arrangement and watering

of 2.7 metre long etc. with charcoal/ coke and salt as

Providing and fixing 25 mm X 5 mm G.I. strip on surface

or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm Copper. strip on

surface or in recess for connections etc. as required.

5.18 Providing and fixing 6 SWG dia G.I. wire on surface or in

35 recess for loop earthing along with existing surface/ Mtr 150 46.49 6974.18

recessed conduit/ submain wiring/ cable as required

6.2 Providing and fixing of lightning conductor finial, made of

36 25 mm dia 300 mm long, G.I. tube, having single prong at Nos. 2 573.43 1146.86

top, with 85 mm dia 6 mm thick G.I. base plate including

holes etc. complete as required.

6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on

37 parapet or on surface of wall for lightning conductor and Mtr 200 139.48 27896.71

external lighting complete as required. (For Horizontal run)

6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on

38 parapet or on surface of wall for lightning conductor Mtr 60 218.08 13084.88

complete as required. (For vertical run)

ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

6.12 Providing and fixing testing joint, made of 20 mm X 3 mm

39 thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, Set 2 133.95 267.90

nuts, chuck nuts and spring washers etc. complete as

INTELLIGENT FIRE DETECTION AND ALARM SYSTEM -

17.2.1 Supplying, installation, testing and commissioning of micro

processor based intelligent addressable main fire alarm

panel, central processing unit with the following loop

modules and capable of supporting not less than 240

devices (including detectors) and minimum 120 detectors

per loop and loop length up to 2 km, network

communication card, minimum 320 character graphics/

LCD display with touch screen or other keypad and

minimum 4000 events history log

40 in the non volatile memory (EPROM), power supply unit -

(230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed

maintenance free batteries with automatic charger. The

panel shall have facility to connect printer to printout log

and facility to have seamless integration with

analog/digital voice evacuation system (which is part of

the schedule of work under SH: PA System) and shall be

complete with all accessories . The panel shall be

compatible for IBMS system with open protocol BACnet/

Modbus over IP complete as per

17.2.2 Supplying, installation, testing & commissioning of central

41 graphical fire alarm management system to centrally Each 1 2,22,078.84 222078.84

monitor and operate the fire alarm system complete as

17.2.3 Supplying, installation, testing & commissioning of

42 repeater panel wih 320 character/ Touch screen LCD Each 1 1,20,318.95 120318.95

display with inbuilt reset, acknowledge and silence

switches complete as required.

17.2.9 Supplying, installation, testing & commissioning of

intelligent addressable thermal detector with rate of rise

cum fixed tempreature thermistor complete with base as

17.2.4 Supplying, installation, testing & commissioning of

44 intelligent analog addressable photothermal detector Each 117 3,163.84 370169.40

complete with mounting base complete as required.

17.2.13 Supplying, installation, testing & commissioning of

45 intelligent addressable duct detector including suitable Each 1 8,650.19 8650.19

Photo detector complete with base as required

17.2.5 Supplying, installation, testing & commissioning of

46 response indicator on surface/recessed MS Box having Each 41 305.54 12526.95

two LED, metallic cover complete with all connections etc

17.2.14 Supplying, installation, testing & commissioning of

addressable manual call point complete as required.

17.2.15 Supplying, installation, testing & commissioning of

addressable horn cum strobe complete as required.

17.2.7 Supplying, installation, testing & commissioning of fault

isolator complete with base as required.

17.2.10 Supplying, installation, testing & commissioning of

addressable fire control module complete as required

17.2.11 Supplying, installation, testing & commissioning of

51 addressable phone control module complete as required. Each 3 3,616.61 10849.83

17.2.17 Supplying, installation, testing & commissioning of fire

fighter telephone handset complete as required.

ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

17.5.2 Supplying & laying of 2x1.5 sqmm fire alarm armoured

53 cable, 600/1000V rated with annealed copper conductor Each 2835 191.51 542939.70

having XLPE insulation, steel wire armouring & FRLS

outer sheath complete as required.

Supplying, installation, testing & commissioning of 6 zone,

voice alarm controller with USB, MP3 player (including 6

54 17.3.1 zone button paging station) with seamless integration Each 1 1,39,938.53 139938.53

facility with main fire alarm panel for voice evacuation

complete as required.

Supplying, installation, testing & commissioning of

1.5/3/6W ceiling speaker complete as required.

Supplying, installation, testing & commissioning of

56 17.3.3 1.5/3/6W metal box ceiling/wall speakers complete as Each 2 1,984.87 3969.75

Supplying, installation, testing & commissioning of

57 17.3.4 ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS Each 3 2,687.83 8063.48

enclosure complete as required.

Supplying, installation, testing & commissioning of 6

inches dia, 2 watts, 70/100 volts ceiling speaker complete

Supplying, installation, testing & commissioning of digital

59 17.3.6 audio amplifier 50 Watt, 25V rms operating at 240 volt AC Each 3 1,07,135.54 321406.62

supply complete as required.

Supplying, installation, testing & commissioning of digital

60 17.3.7 audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Each 1 1,61,394.64 161394.64

Supply complete as required.

Supplying, installation, testing & commissioning of Voice

61 17.3.9 command keypad 6 zone, with microphone assembly Each 1 90,504.89 90504.89

complete as required.

Supplying and drawing of cable Fire Retardant PVC

insulated copper conductor cable in the existing surface /

62 17.5.3 recessed steel conduit of following pairs, cores and size -

including connections and interconnections etc. as

a 17.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm meter 5 98.52 492.62

b 17.5.3.3 speaker cable Three pair, 2-core, 1.5 sqmm meter 1890 136.16 257347.14

c 17.5.3.4 speaker cable Four pair, 2-core, 1.5 sqmm meter 50 174.91 8745.40

Cable End Termination & Pipes -

Supplying and making ends termination with brass

compression glands and aluminium lugs for following size

of PVC insulated PVC sheathed aluminiumconductor

cable of 1.1 KV grade as required .

Providing, laying and jointing PVC/RCC NP-2 pipe with

Vin stiff mixture of cement mortar in the proportion of 1:2

(1 cement:2 fine sand) including trenching

64 (75 cm deep / or as required) i/c testing the joints etc. in -

loose soil/under the flooring (before laying the finished

flooring) for electrical cable entrance to the building

complete as required i/c excavation and refilling of earth.

ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supplying and laying of following size DWC HDPE pipe

ISI marked along with all accessories like socket, bend,

couplers etc. conforming to IS 14930, Part II complete with

fitting and cutting, jointing etc.direct in ground (75 cm

below ground level) including

excavation and refilling the trench but excluding sand

cushioning and protective covering etc., complete as

a 14.16.1 63 mm dia (OD-63 mm & ID-51 mm nominal) metre 100 273.43 27343.20

b 14.16.2 90 mm dia (OD-90 mm & ID-76 mm nominal) metre 5 321.03 1605.17

c 14.16.3 120 mm dia (OD-120 mm & ID-103 mm nominal) metre 5 407.38 2036.90

d 14.16.4 160 mm dia (OD-160 mm & ID-135 mm nominal) metre 80 532.47 42597.83

e 14.16.5 200 mm dia (OD-200 mm & ID-175 mm nominal) metre 5 739.48 3697.42

ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

B NON SCHEDULE ITEMS

DATA /TELEPHONE / EPBX

Supply and fixing following modular switch/socket on the

66 existing modular plate and cover plate & switch box

including connections but excluding modular plate etc. as

Information Socket Outlet RJ -45 suitable for CAT 6 Data

WI FI AND NETWORKING

Supply & Installation of Dual Face Plates along with

67 clearly printed labels and holders complete as required Each 2 250.00 500.00

and as per technical specifications.

Supply & Installation of Single Face Plates along with

68 clearly printed labels and holders complete as required Each 55 225.00 12375.00

and as per technical specifications.

SITC of light fixtures suitable for LED fixture, lamps with

all components and accessories including but not

69 restricted to reflectors, housings, lamp holders and

including cost of ballasts and cost of lamps complete as

required and as below Make:-Bajaj,Havells,Polycab or

20W LED Tube light of Havells Cat Ref:

LUMILINESMART20WLED865PCWH or equivalent.

Recessed mounted 20 W Downlighter of Havells Cat

Ref:Havells GLOWDLR15WLED830S or equivalent.

Recessed mounted 18 W Downlighter of Havells Cat

Ref:Havells GLOWDLR15WLED830S or equivalent.

Surface mounted 18W LED Downlighter of Havells Cat

b Ref:Havells EDGESURFACERDDLR18WLED840S or Nos. 32 2,778.00 88896.00

28/30 W, 2x2 Panel recess mounting luminaire . of

d Havells Cat Ref: PLANO2X2PLR30WLED840SG2, or Nos. 26 7,039.00 183014.00

15W Mirror Light of Havells Cat Ref:

LUMILINEXS17WLED865SPCWH or equivalent.

10W LED Bulk Head of Havells Cat Ref:

e RUGBYGENXFTS10WLED865SSYMBOPC or Nos. 3 1,528.00 4584.00

Supplying of under note sizes of heavy duty exhaust

fans complete with fan motor, blades fixing frame, louver

etc as required of havells makes or equivalent.

Supplying and fixing of 16 SWG M.S. Fan Box 12.5" Rod

but without fan cover (hylam sheet). as required.

Supplying and fixing of fan cover (hylam sheet).on the

existing Fan Box as required.

450 mm exhaust fan 900 RPM Each 8 2,968.00 23744.00

Supply, installation, testing and commissioning of 2 kVA

Inverter with alongwith lithium ion battery giving a

back up of min. 30 min. at full load as per specification

alongwith all accessories including interconnecting cables,

lugs, Base Frames, Battery Rack & Battery Circuit

breaker, palral kit complete as required.

AUDIO VIDEO SYSTEM (Conference Hall )

ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supply installation testig and commissioning of LG

Interactive Display - 86", LG - 86TR3DJ

Brightness : 390 nit (w/o Glass, Typ.)

Multi Touch Point : 20 Points (Max.)

Interface : HDMI (3), RGB (1), Audio In (1), RS-232C In

(1), RJ45 (1), USB 3.0 Type A (3), USB 2.0 Type A (3),

Audio Out / Optical Output, Touch USB (2)

Supply installation testig and commissioning of POP

75 Display - for chairman Each 1 65,000.00 65000.00

Supply installation testig and commissioning of Video

Conferencing Solution

Supports sharp video quality of up to 4K Full-HD video

output, Runs on Android 9.0 operating system, Remote

76 video screen real[1]time control and sharing PC screen Each 1 2,18,000.00 218000.00

functions, Advanced camera with 8M pixel CMOS sensor,

FOV wide-angle lens, 12x zoom and PTZ for easy camera

view adjustments

Supply installation testig and commissioning of

Capacitive touch mute button with LED, 1500mA built-in

Li-Ion battery, Micro-B port for charging, BYOD

77 microphone and upgrading, Low power indicator, Each 28 53,000.00 1484000.00

Bluetooth v2.1+EDR protocols, Proprietary 2.4GHz

wireless technology with dynamic beamforming

Supply installation testig and commissioning of Audio

Audiotrak 120W Class D RMS Mixer Amplifier

2x MIC, 1xLine, 1xEMC, 2xAUX & 4x Phonejack MIC

Input, Rack Mount

Approved Makes - Audiotrak / Barco / Honeywell / Bosch

Supply installation testig and commissioning of CENTRAL

UNIT (CONTROLLER) : Support eight meeting modes:

limited number, FIOFI, LIFO, Last in First out, Chairman's

79 permission (request for speech), voice control start, limited Each 1 2,11,000.00 211000.00

time speech, queuing speech, free discussion.

Approved Makes - Barco / Grandstream / Polycom /

Supply installation testig and commissioning of 6.5 inch

two way loudspeaker having driver size : 6.5'' + 1'', Rated

RMS Power: 40W and peak Power 110W at 8Ohm , RMS

Power Taps: 8 Ω /40W/20W/10W/ 5W, Line Voltage:

100V/70V/8Ω. Refquency Range from 70Hz - 16Khz.

Approved Makes - Bosch / Sonance / Philips /Stapes

Supply installation testig and commissioning of Digital

signal processor ; 08 AEC enabled Mic/Line inputs, 08

Line outputs or better , Input channel processing should

include Pre amplifier, Signal generator, Expander,

Compressor, 10 band Parametric EQ or better.

Approved Makes - Barco / Grandstream / Polycom

Supply installation testig and commissioning of Gold

82 Plated HDMI Cable Each 1 14,750.00 14750.00

Supply installation testig and commissioning of

Conference Room Automation Controller

( for Lighting, Screen, Blinds, and Hardware On / OFF

ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supply installation testig and commissioning of

84 Automation Relay module for Lighting - 2 channel Each 1 1,00,300.00 100300.00

Supply installation testig and commissioning of Lighting

85 Dimmer for Lighting / Blinds - 2 channel Each 1 1,23,900.00 123900.00

Supply installation testig and commissioning of

Automation Keypad

8/10 Buttons Keypad for Automation

Supply laying, testig and commissioning of Set Of Cables:

Speakers Cable, cat 6 cable & patch cable and all type of

wiring for conference systems

Supply installation testig and commissioning of Set Of

Connector and equipment rack:Set of various Connector

88 and other accessories and hardware and software as Lot 1 50,000.00 50000.00

required for Complete Setup

The BOQ shall be read in conjunction with general notes,

specification and equipment schedule and single line

Supply and installation of the following cubical type panels

( Partial Type tested ) made of 14 gauge CRCA structure,

base channel, doors & partitions complete with, Air Circuit

Breaker, moulded case circuit breakers, meters, indicating

lamps, current transformer etc. Complete in all respects,

insulated bus bars with heat shrinkable PVC sleeve in

suitable bus chambers, interconnection, small wiring,

name plate, danger plate, earth bus etc. & comprising of

compartments with hinged door for each feeder & its

accessories, cable alley with hinged doors, bus chamber

with bolted door etc. The panel being of dust & vermin

proof construction with rubber gasket, attractively powder

coated with Siemens grey shade and having orange peel

finish. The panel shall be free standing type/ wall mounted

type as per relevant drawing, Equipment schedule,

specifications including all materials, accessories, loose

supplied items, etc. required for completeness of the

project majorly comprising of following : -

ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

ACB shall have a rated operational voltage of 415V AC,

rated insulation voltage of 1000 volts AC, rated impulse

voltage of 12kV.ACB shall be Moulded Case design and

shall comply with standards IS/IEC 60947-1 & 2. with Ics =

Icu = Icw (1sec) = 50kA.

Both fixed & draw-out circuit breakers shall have single

pole-pitch. ACBs upto 3200A shall be provided with top

horizontal and bottom vertical terminal adapters on both

sides for proper cable connections/bus duct connections.

Shunt trip and closing coil (having common AC/DC supply

upto 250V) shall be continuous rated.

There Should be On, Off, Trip, Spring Charge and Ready

to close Indication lamp for all ACB on the panel door..

ACB trip unit shall be EMC/EMI tested and should have a

display for measurement of current and voltage. It shall be

possible to view last 5 trip cause on trip unit. Separately

powered, individual fault trip indication LEDs (For O/L,

S/C, E/F and trip unit failure) shall be available on the trip

unit which shall function even if the display fails.All ACB

shall be EMS compitable.

All MCCBS shall be with Extended type Front door

operating handle, Phase Spreaders & Phase Barriers

complying to IS/IEC 60947-1 & 2.

MCCBs shall be current limiting type preferably having an

encapsulated double break design, with rated operational

voltage (Ue) of 415V, insulation voltage (Ui) of 690 V (AC

50/60 Hz) & impulse voltage (Uimp) of not less than 8kV.

The electrical life of MCCBs shall be 8,000 operations up

to 250A & 4000 operations up to 630A and shall be of

single frame size upto 250A.Cable Termination on MCCB

should be done using circular lugs being fixed with a bolt

passing through.

For E/F in MCCBs wherever required , external earthfault

module with CBCT should be used with indication lamp on

the panel and fault sensitivity selection from 20% – 60%

In. and time delay selection in case of Earth Fault from 0.5

to 3 Sec/ instantaneous.All incomer MCCB should be with

E/F protection also.There Should be On, Off, Trip, and

electrical fault trip Indication lamp for all MCCB on the

panel door. Separate fault differentiation indication (LED)

for Over current and Earth fault. Indication for over current

and earth fault tripping shall be extended to the panel door

via indication lamps..All MCCB shall be EMS compitable.

All MCCBs of ratigs above 250A shall be microprocessor

based and upto 250A shall be Thermal Magnetic Type

and with Min 35 kA Rating .

ON, OFF, Trip and Ready to close status for each ACB

and ON, OFF Trip staus for all Incommer MCCB shall be

avilable on MODBUS.

Control Voltage for Closing / Tripping coils , Spring

charging motor & Indicting lamps in Manually / Electrically

operated ACB Feeder shall be 230 V AC/ DC.

Metering CTs burden shall be with suitable VA & accuracy

CTs shall be "CAST RESIN" type .

All indication lights shall be LED type.

All energy meter shall be "DIGITAL" type with Modbus

Protocol as per techncial Specification

ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Panel Manufacturer should have Type Test Certificates for

Short Time withstand current test of 50KA for 1.0 Sec

from CPRI. Bhopal / Bangalore.

Control SP MCB's of 2A Rating shall be provided for each

metering circuit.

20% spare control terminal to be provided.

Live parts shall not be accessible after opening the door,

Transparent acrylic sheet to be provided to cover the

same & busbar joints section shall be covered with PVC

All bus bar shall be insulated with coloured PVC Sleeve

i.e. R, Y, B, BK as per colour code.

All internal control wiring shall be heat resistant type.

All TP/TPN feeders shall have solid isolable neutral link.

All starters shall be provided with Auto/ Manual selector

switch, MPCB/ MCCB/MCB, over load relay, single

phasing preventor, ON/OFF/ Trip/ Trip on Eclectrical

Fault indication lamps, ON/OFF push Buttons, contractor

and suitable No. of Potential free contacts for remote /

local operations, indication, interlocking and Building

Management system.

Current density for bus bar shall not be more than

0.8A/Sqmm. Rating of Bus bar is after considering all

derating factors. (Bus bar sizing calculation to be

submitted for approval.)

All TP/TPN feeders shall have solid isolable neutral link.

Bus couplers shall be provided with ON & OFF indicating

lights but without releases.

All feeders shall be provided with door interlocked with

door defeat, pad lock facility.

Spare contacts of Relays/Contactor etc. shall be wired

upto terminal block.

Degree of protection for following type of distribution panel

enclosure shall be as per IS:13947-1993.

IP 43 for indoor panels.

IP 55 for outdoor panels.

Contractor and panel builder shall have to submit the GA

drawing and get approval from consultant before

89 MAIN LT PANEL

2 No.320A, 4-pole MCCB

2 No.320A, 4-pole Contactor

Metering & Indication:

Multifunction digital meter with Class 0.5 active energy

Accuracy with Sag/Swell - Waveform capture and

Individual harmonics monitoring upto 63rd. Power Quality

analyser needs to be capable of Disturbance direction

detection with onboard ethernet Port communication.

Set of ON/OFF/Trip/Trip Circuit healthy/ready to close

Sets of phase indicating lamp with 2A control MCBs.

Auto trip indicating lamps protection by 2A Control MCB

All incomer with buscoupler shall be mechanically and

electrically interlock.Consider all necessary software and

hardware for proper functioning of interlocking.It shall

operate auto on and auto off of breaker and then auto on.

1 Nos.200A, 4P MCCB as Buscoupler

ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

500A, TPN aluminium, colour coded bus bars suitable for

415V, 50Hz with fully rated neutral.(After deration)

1 Nos.200A, TPN MCCB

2 Nos.100A, TPN MCCB

6 Nos.63A, TPN MCCB

7 Nos.40A, TPN MCCB

2 Nos. Bulb with holder

Panel shall be suitable for incoming & outgoing supply

with cables,and top / bottom entry as required.

2 No.63 A, TPN MCCB

1 No.63 A, 4P Bypass

Metering & Indication:

Combined Ammeter/Voltmeter with Selector Switch and

160/5A, CL-1, 10VA CTs and 2A control MCB.

Set of ON/OFF/Trip/Trip Circuit healthy/ready to close

Sets of phase indicating lamp with 2A control MCBs.

100A, copper busbar for R,Y,B and 200A for Neutral,

colour coded bus bars suitable for 415V, 50Hz with fully

rated neutral.(After deration)

4 Nos.32A, TPN MCCB

2 Nos.16A, TPN MCCB

2 Nos.16A, DP MCCB

2 Nos. Bulb with holder

Panel shall be suitable for incoming & outgoing supply

with cables,and top / bottom entry as required.

Supply & Laying of 1.1KV grade multicore aluminium

conductor XLPE insulated and PVC sheathed armoured

91 cable conforming to IS : 7098 (Part-I) 1998 along walls/ on

existing cable trays etc. in an approved manner and as

Cable End Termination & Pipes -

Supplying and making ends termination with brass

compression glands and aluminium lugs for following size

of PVC insulated PVC sheathed aluminiumconductor

cable of 1.1 KV grade as required .

Constructing Masonry chamber 60x60x75 cm (deep)

inside with 75 class designation FPS brick work in cement

mortar 1:4 (1 cement: 4 coarse sand) (for cable entry) with

10 mm thick M.S. hinged cover plate on top in 40 x 5 mm

93 MS angle iron frame embedded in C C 1:2:4 i/c each 4 7,500.00 30000.00

necessary excavation and inside plastering with cement

mortar 1:3 (1 cement:3 fine sand) finished with a floating

coat of neat cement complete as required and as per

specifications attached.

ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Constructing masonry chamber 60 cm x 45 cm x 50 cm

(deep) inside with 75 class designation FPS brick work in

cement mortar 1:4 (1 cement : 3 coarse sand) (for cable

entry) with 10 mm thick M.S. hinged cover plate on top in

94 40 x 40 x 5 mm MS angle iron frame embedded in C C each 2 6,000.00 12000.00

1:2: 4i/c necessary excavation and inside plastering with

cement mortar 1:3 (1 cement:3 fine sand) finished with a

floating coat of neat cement complete as required and as

per specifications attached.

EXTERNAL LIGHTING

Supplying and fixing (with suitable MS clamp) 300mm

95 long 65mm dia MS pipe with base plate i/c nipple for each 2 3,384.00 6768.00

Supplying, installing, testing & commissioning of 4.5 Mtr

long single dip Galvanised steel octagonal poles

in 3mm sheet integrated connector box inside the

pole containing one no. 5A MCB , Neutral link and earth

terminal with single over hang bracket 1m long ;

providing and fixing in position 1:2:4 reinforced

cement concrete foundation for the pole, size

500mm(L)X500mm(W)X 1650mm deep i/c excavation of

earth, providing, cutting, bending and placing in position

reinforcement as per drawing and providing PVC

flexible pipes 50mm dia for cable entry and exit as

required i/c foundation bolts, transportation, handling,

marking etc. as per specification and drawings as required

of Havells/ Bajaj or equivalent

Supply and installation of following arms suitable for 4.5

Mtr to 9 mtr street light pole

a Single Arm over hang bracket 1mtr length each 12 3,384.00 40608.00

b Double Arm over hang bracket 1mtr length each 3 4,600.00 13800.00

Providing and erection of black painted galvanized 3

meter high poles in different section, top 60mm dia.,

bottom 100mm dia. with gold colour painted ornamental

cast aluminium ring having lockable weather proof flush

door junction box in bottom section, and suitable

arrangement for installation of CCTV and with base plate

dia. 290mm having 4 holes of 22mm dia. complete

erected in an approved manner including foundation of

Suitable size & type of foundation bolts as required. (For

supply & drawing 3 core 2.5 sqmm

unarmoured copper cable inside the GI

99 Octagonal pole from connector box to the light Set 15 1,083.00 16245.00

fixture including connections with thimbles as required

upto 9m high pole

Supplying and fixing (with suitable MS clamp) 1200mm

long vertically and 900mm inclined at 45 degree, 65mm

dia MS pipe with hardware i/c nipple for street

light.(boundary wall light)

ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supplying and fixing of LED Bollard Fitting 600mm High

with IP65 and IK07 Housing made up of aluminum pipe

powder coated black after phosphochromate treatment

with aluminum heat sink for effective thermal management

Complete with Mounting Brackets & accessories as

required with connections similar. Havells Mount Bollard

MOUNTBLMINIMOUNTBL10WLED830PSYMTOPMMAS

. The product should be BIS approved with R number

mentioned on product label. To be supported with

Product test reports - LM79, Is 10322/IEC 60598 and for

LEDs - LM80, RoHS and Photo Biological Safety

Supplying and fixing of Spike Light LED of Havells cat no.

IRVINESPS5WLED830PSYMTG or equivalent.

Supply, fixing &testing of prewired external light fixture

having Die-cast housing with epoxy coating and

having profiled cooling fins at the top for effective

103 heat dissipation, separate driver and LED lamp cavity,

heat resistant toughened clear glass cover with high

transmittance and high quality gasketing system,

high power LED complete as required.

25 Watt LED Fitting Lighting lantern on GATE/ POST TOP

of Havells Cat

no.CORALMINIPT15WLED757PSYMTOPC or equivalent

Street Light Luminare of 60 watt LED including suitable

fixing MS clamps etc.as requird of Havells Cat No.

ENDURASUNDOWNSL60WLED765PASYBOTG or

Street Light Luminare of 35 watt LED including suitable

fixing MS clamps etc.as requird of Havells Cat No.

ENDURASUNDOWNSL35WLED765PASYBOPC or

Floodlight LED luminaire 50 Watas with high pressure

die cast housing with IP66 deg of protection of Havells

Cat No. JETAQUANTOPLUSFLP50WLED757SYMLENS

DSR TOTAL Rs. 78,64,602.77

NON DSR TOTAL Rs. 62,99,986.60

DSR + NON DSR TOTAL Rs. 1,41,64,589.38

PROJECT : BILL OF QUANTITY FOR HVAC WORK FOR PROJECT BUILDING IN D-WING

SUMMARY OF PRICES AMOUNT

1 PART A VRF EQUIPMENT Rs. 37,82,810

2 PART B PIPING WORK Rs. 5,40,950

3 PART C AIR DISTRIBUTION SYSTEM. Rs. 5,33,567

4 PART D LOW SIDE MECHANICAL VENTILATION SYSTEM Rs. 42,771

5 PART E ELECTRICAL WORK Rs. 4,96,940

TOTAL OF ALL ABOVE Rs. 53,97,038

Note:- Final Quantity As Per The GFC Provided By HVAC Contractor 10% Variation For Tender Drg.

BILL OF QUANTITIES

S.No Description Unit Qty. Rate (Rs.) Amount (Rs.)

PART A VRF EQUIPMENT

Variable Refrigerant Flow Air-conditioning System

Supply,instalaltion ,testing and commissioning of variable refrigerant flow modular

type airconditioning system invertor controlled with stepless modulation complete

with indoor and outdoor units,individual remote controller and centralized

controller,interconnected refrigerant piping,full charge of refrigerant gas &

oil,control cabling etc.as per detail given in specifications and having following

items:(The prices to be given in Indian rupees on Full Import duty basis)

Refrigerant to be used shall be - R - 410 A.

Supply , installation, testing and commissioning of Outdoor Unit with blue fin

coating@ 44.4 Degree C

Supply,installation, testing and commissioning of side /top discharge Modular type

outdoor units equipped with highly efficient scroll compressors with both inverter

speed type compressors special heat exchanger,low noise condenser fan ,auto

check function for connection error,auto address setting and capacity as

mentioned below. Cable termination with double compression glands. The unit

shall be filled with first charge of refrigerant and ready for use as required. Any

additional top up charge required at the time of commissioning is inclusive in cost.

Note :-All Outdoor units shall be mounted on MS powder coated / epoxy painted

stand along with fixing arrangement as approved by engineer incharge.

i 12 HP OUTDOOR UNIT For (Conference & Min.Conference Room) Nos. 1 2,70,000 2,70,000

i 16 HP (8+8 HP) OUTDOOR UNIT For (TFA Uunit) Nos. 1 360000 3,60,000

ii 3x18 HP OUTDOOR UNIT (Balance Areas) Nos. 3 405000 12,15,000

2) Supply Instalaltion, testing and commissioning of Indoor Units with + 5% Tolerence

All Below units shall be provided with Remote Control

A CEILING TYPE CASSATTE UNIT

i 1.6 TR Split Units Regular Cassette TypeI Nos. 11 32,500 3,57,500

ii 1.28 TR Split Units Regular Cassette TypeI Nos. 10 28,500 2,85,000

B WALL MOUNTED HI - WALL UNIT

i 1.28TR Split Units Nos. 12 17,280 2,07,360

ii 1.0TR Split Units Nos. 12 12,800 1,53,600

C CEILING TYPE TFA UNIT

i 6.4 TR TFA Units Nos. 2 78000 1,56,000

3) Supply,instalaltion,testing and commissioning of Y-joints. Nos. 46 3250 1,49,500

Supply, Instalaltion, testing and commissioning of self diagnostic type Remote

Controllers. Corded Type

5 Refrigerant R-410A to Top up the system if required. Kg 75 1250 93,750

Supply, instalaltion, testing and commissioning of Main Intelligent central

6 controller system Touch Screen suitable for above indoor units to operate, Nos. 1 48000 48,000

monitor, on/off, temperature setting etc.

Comprehensive Annual maintenance contract for VRF System with BMS System

including Energy monitoring & Central Remote Control for Suitable for 82.0HP

Digitally signed by PRIYA

S.No Description Unit Qty. Rate (Rs.) Amount (Rs.)

i After First year L/s 1 168100 1,68,100

ii After Second year L/s 1 184500 1,84,500

8 DX TYPE SPLIT UNIT WITH 3 STAR RATING WITH GREEN GAS

Supply , installation, testing & Commissioning of DX type split AC units with air

cooled condenser mounted in outdoor unit complete with scroll/rotary

compressor ,condensor ,wiring & accessories . Indoor units shall be wall mounted

type complete with evaporator ,fan, filter ,drier, expansion devices &

microprocessor control panel along with all accessories with refrigerant & oil

charge , cordless remote controls. The unit shall be suitable for working 50 cycle

/second ,1 phase AC supply .The unit shall be designed to take care of veritcal head

4mt & horizontal length of 15mt & necessary oil seprator shall be included

,Necessary supporting arrangement for both indoor & outdoor units ( Powder

Coated /Epoxy painted MS stand for ODU units as per approved make shade by

Architect) with necessary vibration isolation arrangement as per site condition

etc.( without condensate drain pipe ,electrical pipe ,electrical power & control

cabling between indoor & outdoor unit which shall be paid seprately ). The Color

of the outdoor units to be finalized by the Architect as per building Architectural

i All Unit shall be Minimum 3 Star Rating Based

ii The Outdoor unit Compressor must be provided with 5 Year Warranty Period.

Civil Work such as wall hole making , wall chiseling, refilling of chiseling part with

mortar etc as per site condition.

Nitrogen pressure testing for leakages & flushing during installation & after

commissioning between IDU & ODU with flar nuts

Removable Covers for all indoor & Outdoor units shall be supplied & put on the

units after installation & commissioning.

vi Incoming power supply shall be provided near each indoor units

vii Sound level of Outdoor unit shall be 70 Db at 1 Mt Distance

Below All outdoor units to be provided with blue fin / UV coating . No extra price

shall be paid for the same .

a) 2.0 TR Split Units Nos 2 50000 1,00,000

Insulated Refrigerant piping for above split unit 2.0TR (As per site Location) RMT 30 1150 34,500

Total of Part A carried to Summary of Prices. 37,82,810

PART B PIPING WORK

Supply, installation, testing and commissioning of interconnecting copper

refrigerant pipe work (19mm /13mm thick )duly insulated with ( Class O )

elastomeric nitrile rubber type tubular insulation between indoor & outdoor units

as per specifications. All piping inside the room shall be properly supported on GI

Slotted Channel and all external piping shall run in Cable tray with top cover

(Cable tray with top cover to be paid separately as per Item. 6). All outside piping

insulation to be covered with protective coating. ( fiber glass cloth helically wound

and coated with 2-coats of reisn with hardner to give smooth and plain finish.)

i 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm RMT 15 2050 30,750

ii 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm RMT 25 1850 46,250

iii 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm RMT 35 1550 54,250

iv 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm RMT 35 1250 43,750

v 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm RMT 45 1050 47,250

vi 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm RMT 35 850 29,750

vii 22.2 mm O.D. (insulation – 19 mm thick) RMT 55 790 43,450

viii 19.1 mm O.D. (insulation – 13 mm thick) RMT 35 705 24,675

ix 15.9 mm O.D. (insulation – 19 mm thick) RMT 45 610 27,450

x 12.7mm O.D. (insulation – 19 mm thick) RMT 155 495 76,725

xi 9.5 mm O.D. (insulation – 13 mm thick) RMT 45 410 18,450

xii 6.4 mm O.D.(insulation : 13 mm) RMT 155 305 47,275

Supply, installation, testing and commissioning of uPVC 10 Kg/Sq.cm drain water

piping complete with fittings,connection bush, support as per specification and

2) insulated with 6 mm thick closed cell elastomeric nitile rubber insulation including

the cost of cutting & filling chases in wall/floor, repairing using wire mesh &

making good with rough finish.

ii 32 mm dia O.D RMT 55 265 14,575

iii 40 mm dia O.D RMT 10 310 3,100

Total of Part B carried to Summary of Prices. 5,40,950

PART C AIR DISTRIBUTION SYSTEM.

1) GSS RECTANGULAR DUCTING

Digitally signed by PRIYA

S.No Description Unit Qty. Rate (Rs.) Amount (Rs.)

Supply,installation, balancing & commissioning of Factory fabricated GSS sheet

metal ducting complete with neoprene rubber gaskets , elbows , splitter dampers

, vanes , hangers, supports etc. as per approved drawings and specifications of

following sheet thickness complete as required.

splitter & vanes etc.shall be apart of ducting no extra cost shall be paid for the

All supports shall be provided with 1 coat of primer & 2coat of black paint

RECTANGULAR DUCTING (FACTORY FABRICATED)

iii 20 G SMT 0 -

Supply,installation, balancing & commissioning of Site fabricated GSS sheet metal

ducting complete with neoprene rubber gaskets, elbows,splitter

dampers,vanes,hangers, supports etc. as per approved drawings and specifications

of following sheet thickness complete as required.

All supports shall be provided with 1 coat of primer & 2coat of black paint

iii 20 G SMT 0 -

3) Main Box Type Duct Damper

Supply, fabrication, installation and testing of 18G GI construction Main duct

3.1 damper for supply & return air complete with nuts bolts, screws, linkage, flanges SMT 4 5850 23,400

etc.ducts lever and quadrants for proper balancing of the air distribution system .

Supply,installation, testing and commissioning of 50 micron powder coated

4) "Aluminium"collar volume control dampers with key operated of black painted in SMT 4 4850 19,400

supply & Return air registers / terminals.

Supply,installation,testing and commissioning of 50miron Powder coated

5) Aluminium extruded Grille /Diffuser for supply and return air as per specification &

the sizes will be as per the drawing

Supplying & fixing of Fresh air intake louvers with bird screen (Aluminium extruded

only) as per specification and sizes will be as per shop drawing mentioned.

7) Duct Insulation

Supplying , installation, testing & commissioning of external thermal insulation on

ducts with Closed Cell Cross Linked Polythylene (XLPE) Foam of density 33 Kg/m³

with 13 mm thick & thermal Conductivy not exceding 0.035 W/mK at an average

Temperature of 40°C. The Material Shall be rated as Class 1, As per BS476 Part 7 ,

The Smoke Density as per AS - 1530.3 Shall not exceed 1. The Material shall have

Fire Approval from CBRI - Roorkie & no toxicity under flaming and non- flaming

condition as per AITM 3.000 (1993) .Adhesive used for setting the insulation shall

be non - flammable,Vapour Proof. All Joints should be sealed with 3 mm thick 50

mm wide PE tape and Flange to be overlapped by 6" width of the same material

thickness. Finally Duct insulated should be strapped by 12mm Plastic Packing strip

at every random meter & conforming to standard Spec.

13 mm thick Closed Cell Cross Linked Polythylene( XLPE) Foam with Factory

Laminated Al PE Foil for Supply Air Duct

Supplying and fixing of acoustic lining of duct with fibre glass rigid board of density

8) 48 Kg/m³ sealed in fibre glass tissue paper andcovered with 0.5 mmthick

perforated aluminium sheet and conforming to standard specification.

i 12 mm thick fibre glass rigid board. SMT 5 910 4,550

Total of Part C carried to Summary of Prices. 5,33,567

PART D LOW SIDE MECHANICAL VENTILATION SYSTEM

1) INLINE FAN WITH REGULATOR

Supply, installation, testing and commissioning of ceiling suspended Inline fans

(Rectangular/Round casing) complete with bird screen, rain guard, metal clad MCB

& starter ,5m length copper cable, earthing wire all compete as required of

following capacities as per specification and shop drawing mentioned.

EXHAUST AIR (For Toilet Area)

ii 150 CFM ,20mm St.Pr. Nos 7 2263 15,841

iii 300 CFM ,20mm St.Pr. Nos 1 4530 4,530

Digitally signed by PRIYA

S.No Description Unit Qty. Rate (Rs.) Amount (Rs.)

Total of Part D carried to Summary of Prices. 42,771

PART E ELECTRICAL WORK

1) ELECTRICAL WORK FOR HVAC EQUIIPMENTS

2) POWER ,CONTROL CABLING & EARTHING

Supplying,laying,effecting proper connections, testing & commissioning of the

following sizes of 1.1 KV - Cross Linked Poly Ethelene armoured aluminum /

Copper conductor and control cabling cables conforming to relevant latest

amended Indian Standards including clamping the cables to supports in an

approved manner as required complete with all accessories.

FOR VRF OUTDOOR :-

(cabe as per site location)

4C x 10 mm² Cu PVC Cable RMT 40 647 25,880

4C x 10 mm² Cu PVC Cable RMT 60 647 38,820

4C x 10 mm² Cu PVC Cable RMT 120 647 77,640

Providing & fixing weather proof isolator with suitable rating near each unit. SET 10 5500 55,000

4) POWER CUM CONTROL CABLING

Supply and laying ,testing & commissioning of following sizes of sheilded Copper

conductor control cables Sq. mm in PVC conduit with including fixing clamps &

effecting proper connections to equipment etc. complete as required .

4.1 3C X 1.5 Sq.mm shielded cable (as per site location) RMT 1200 180 2,16,000

Supply & laying 8 SWG GI wire at 0.5mt below ground level for conductor earth

electrode,inculding connection / termination with GI thimble etc as required .

The AC contractor shall provide fire shunt relay contact in his panel wherever

necessary along with auto/ manual mode selector switch in the outgoing feeder

for HVAC EQUIPMENTS etc.To take fire input signal (Potential Free Contact).Cost

shall be included in the panel price quoted by him.

Total of Part E carried to Summary of Prices. 4,96,940

Digitally signed by PRIYA

Sl. No Description of Item Ref Image Quantity Rate (Rs) Amount(Rs)

Supply, Installation and placement of High Back Chair

with Headrest from manufacturers certified with ISO

14001:2015 (all ISO must be from NABCB/IAF

accredited agency),BIFMA (LEVEL 2), Indoor air quality,

Indoor Air Advantage Gold, Green Pro,Greenguard (by

UL), Griha 2019.1.SEAT/BACK ASSEMBLY: The

Cushioned seat assembly consshould be ts of seat

outer (material-30% Glass Fiber Nylon)& upholstered

Seat inner (material- Poly

Propylene) with moulded Polyurethane foam &

polyster fabric. The Net Back should be made up of

Back outer (material-Glass Fiber Filled Nylon)& Back

inner (material- PP) and upholstered using Polyester

fabric with high tenacity yarn.Full Back Size: 46.5 cm.

Supply, HIGH RESILIENCE

Installation (HR) POLYURETHANE

and placement of Chair without

Headrest from manufacturers certified with ISO

14001:2015 (all ISO must be from NABCB/IAF

accredited agency),BIFMA (LEVEL 2), Indoor air quality,

Indoor Air Advantage Gold, Green Pro,Greenguard (by

UL), Griha 19.SEAT/BACK ASSEMBLY: The Cushioned

seat assembly cons should be ts of seat outer

(material-30% Glass Fiber Nylon)& upholstered Seat

inner (material- Poly Propylene) with moulded

Polyurethane foam & polyster fabric. The Net Back

should be made up of Back outer (material-Glass Fiber

Filled Nylon)& Back inner (material- PP) and

2 upholstered using Polyester Mesh fabric with high 26 30,321.12 788349.1229

Supply, Installation and placement of Storage from

manufacturers certified with ISO 9001:2015, ISO

must be from NABCB/IAF accredited agency),BIFMA

(LEVEL 2), Indoor air quality, Indoor Air Advantage

Gold, Green Pro,Greenguard (by UL), Griha 2019.AV

storage of the following specifications with size should

be be 1745 X 670 X 740 CARCASS-Made of 18mm Thick

Pre-laminated twin board of E1-P2 grade and approved

shade conforming to should be -12823:1990, Edge

banded with matching 0.8 mm thick PVC lipping. Pilot

holes provided for fixing 12U AV equipment rack.

Supply, installation and testing of U shape modular

conference table (9mx3.2m approx) as per approved

technical specification and direction of BSL

MINGLE MODULAR 12 SEATER CONFERENCE TABLE

Digitally signed by PRIYA