REPAIR/REPLACEMENT OF DISTRIBUTION LINES, VALVES, VALVE PIT, COVERS ETC AT MIL STATION DHANA.

Amount

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth, for foundation, etc in hard/dense soil and getting out complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation complete all as specified and directed.

Removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed.

Taking up or down steel tubing and connections for repair & replacement complete all as specified and directed of following sizes:- (a) Size 15mm bore

(b) Size 20mm bore

(c) Size 25mm bore

(d) Size 40mm bore

(e) Size 50mm bore

(f) Size 80mm bore

Material & Labour for galvanized steel water tubes, medium grade, with all fittings complete fixed to wall and ceiling or laying in floors complete all as specified and directed for following bore sizes:- (a) 15 mm

Supply & Fix, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed for following sizes: - (a) Size 15mm bore

(b) Size 20mm bore

(c) Size 25mm bore

(d) Size 40mm bore

(e) Size 50mm bore

(f) Size 80mm bore

Refixing Old serviceable steel tubing and connections with Supply & Fix new medium grade fittings in new or old position (walls, ceiling, floors etc) complete all as specified and directed for following sizes:- (a) 15mm bore

(b) 20mm bore

(c) 25mm bore

(d) 40mm bore

(e) 50mm bore Note for item Nos 7.01 to 7.05:- Old serviceable tubing obtained from taking down shall be used under this item.

Demolition of existing valve pit and Material & Labour for construction of valve pit consisting of 230mm thick, old size brick masonry wall in cement mortar (1:6), PCC (1:4:8) type D2, using 40mm graded stone aggregate as in foundation, PCC (1:2:4) type B1, using 20mm graded stone aggregate in coping/bed, finished even and smooth, rendering 15mm thick in cement mortar (1:6) internally and 10mm thick in cement mortar (1:4) externally, finished even and smooth without using extra cement including three coats of white wash and earth work in any type of soil and including 3mm thick MS sheet cover fixed on 40mmx40mmx6mm thick angle iron frame embedded in PCC coping with locking arrangement and mild steel hold fast & handle and duly painted with two coats of synthetic enamel paint over one coat of primer etc. complete all as specified and directed for the following sizes:- (a) 900mm x 600mm x 1000mm

(b) 1050mm x 750mm x 1000mm

Supply & Fix, in repair, cast iron sluice valve 80 mm dia with flanged ends class PN-1 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed .

Supply & Fix, in repairs, stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed for 15mm bore of pipe.

Supply & Fix, in repairs, stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed for 20mm bore of pipe.

Supply & Fix, in repairs, stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed for 25mm bore of pipe.

Supply & Fix, in repairs, ball brass valves, high pressure, with polythene float and fly nut, screwed for iron pipe and fixed complete all as specified and directed for 15mm bore of pipe.

Supply & Fix, in repairs, ball brass valves, high pressure, with polythene float and fly nut, screwed for iron pipe and fixed complete all as specified and directed for 20mm bore of pipe.

Supply & Fix, in repairs, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed for following bores of pipe:- (a) 25 mm bore

(b) 40 mm bore

(c) 50 mm bore

(d) 80 mm bore

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 34,780.00 /- ]

ROYAL CONSTRUCTION

M/S SHIVA TRADERS